JOHN DEERE 7200 Flex-Fold MaxEmerge® 2 Drawn Conservation Planter 8-Row Wide and 12-Row Narrow OPERATORS MANUAL – PDF DOWNLOAD

Description

JOHN DEERE 7200 Flex-Fold MaxEmerge® 2 Drawn Conservation Planter 8-Row Wide and 12-Row Narrow OPERATORS MANUAL – PDF DOWNLOAD

DESCRIPTION:

JOHN DEERE 7200 Flex-Fold MaxEmerge® 2 Drawn Conservation Planter 8-Row Wide and 12-Row Narrow OPERATORS MANUAL – PDF DOWNLOAD

Introduction:

• READ THIS MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and should remain with the machine when you sell it. RIGHT-HAND AND LEFT-HAND sides are determined by facing in the direction the implement will travel when going forward.
• THIS MACHINE is of metric design. Measurements in this manual are metric with the customary U.S. measurement following. Use only metric hardware and tools as specified. WRITE PRODUCT IDENTIFICATION NUMBERS in the space provided in the Specifications section. Accurately record all the numbers to help in tracing the machine should it be stolen. Your dealer also needs these numbers when you order parts.

TABLE OF CONTENTS:

JOHN DEERE 7200 Flex-Fold MaxEmerge® 2 Drawn Conservation Planter 8-Row Wide and 12-Row Narrow OPERATORS MANUAL – PDF DOWNLOAD

Safety 05-1
Safety Signs 10-1
Preparing the Tractor
Hydraulic Pressure 15-1
Check Tractor Hydraulic System 15-1
Rockshaft Selector Lever 15-1
Link Lengths 15-2
Sway Blocks 15-2
Tire Size 15-3
Check Tire Inflation 15-3
Rear Wheel Weighting 15-3
Setting Wheel Tread 15-4
Front End Weighting 15-4
Set Tractor Control Valve Lever 15-4
Selective Control Valve Lever Stop 15-5
Auxiliary Return Line Coupler Attachment 15-6
Directional Valve 15-6
Preparing the Planter
Tightening Hardware 20-1
Tire Inflation 20-1
Changing Row Widths 20-1
Lubrication 20-2
Selecting Seed Plates (Plate Seed
Meters) 20-2
Attaching and Detaching
Attaching Planter to Tractor 25-1
Attaching Monitor to Tractor 25-8
Detaching Planter from Tractor 25-9
Detaching Monitor from Tractor 25-1 O
Transporting
Transport Safely 30-1
Folding the Planter 30-1
Unfolding the Planter 30-7
Page
Planters Equipped w/Single-Disk Fert
Opener 30-13
Preparing the Vacuum Meter Unit
Choosing Seed Disks 35-1
Selecting Seed Disks 35-3
Selecting Seed Disks 35-5
Adjusting Vacuum Meter Insert 35-7
Installing Seed Disk 35-8
Adjusting Meter Hub 35-1 O
Sugar Beet and Sorghum Seed Knockout
Wheel 35-12
Installing Knockout Assembly 35-13
Selecting Correct Vacuum Meter Brush 35-14
Changing Vacuum Meter Brush 35-14
Installing Vacuum Meter Brush 35-15
Check Hydraulic Connections 35-16
Preparing the Plateless Meter Unit
Plateless Seed Hoppers 40-1
Feed Cup Metering Unit 40-3
Feed Cups
Soybean Feed Cup 40-3
Low Rate Sorghum 40-4
Acid-Delinted Cotton, Small Soybeans 40-6
Replace Feed Cup w/Finger Pickup 40-7
Operating the Planter
General Information 45-1
Raising and Lowering the Planter 45-2
Leveling the Planter 45-2
Marker Length 45-5
Raising and Lowering Markers 45-5
Marker Float Range 45-6
Marker Off Switch 45-7
Independent Marker Control (Optional) 45-7
Marker Breakaway Bolt 45-7
Continued on next page
All information, illustrations and specifications in this manual are based on
the latest information available at the time of publication The right is
reserved to make changes at any time without notice
OMA51905 G0-19-18JUL90
COPYRIGHT@ 1990
DEERE & COMPANY
Moline, Illinois
All rights reserved
A John Deere ILLUSTRUCTION™ Manual
Previous Editions
Copyright® 1989, 1988, 1987 Deere & Company
180790
Page
Half-Width Planting Drive Disconnect
(Optional) 45-8
Clutch Actuator 45-8
Vacuum Meter Pump 45-8
Vacuum Meter Pump Pressure 45-9
Changing Planting Depth 45-10
Adjusting Closing Wheel Down Force 45-11
Centering (Align) Closing Wheels 45-11
Filling Seed Hoppers 45-12
Emptying Seed Hoppers
Vacuum Meter Hoppers 45-13
Plateless Meter 45-13
Inspection and Cleanout of Seed
Hoppers/Metering Units 45-15
How To Use Planting Rate Charts
How To Use Planting Rate Charts 50-1
Changing Input Sprocket Combinations 50-2
Changing Planting Rate Sprocket
Combinations 50-3
Operating the Vacuum Meter
Vacuum Meter Operating Characteristics 55-1
Use of Talc Lubricant 55-1
Set Vacuum Level 55-3
Vacuum Level for Corn 55-4
Vacuum Level for Peanuts 55-5
Vacuum Level for Sugar Beet~ 55-6
Vacuum Meter Seed Charts
Decal Seed Charts
Decal Seed Charts 60-1
Vacuum Meter
Corn and Sunflower 60-2
Cotton 60-4
Cotton Hilldrop 60-6
Sorghum 60-8
Soybeans/Narrow Rows 60-1 O
Soybeans/Regular Rows 60-12
Sugar Beets 60-14
Small Edible Beans 60-16
Medium Edible Beans 60-18
Large Edible Beans 60-20
Runner and Spanish Peanuts 60-22
Virginia Peanuts 60-24
Operating the Plateless Meter
Finger Pickup Metering Unit Operating
Characteristics 65-1
Feed Cup Operating Characteristics 65-2
Contents
ii
Plateless Meter Seed Charts
Finger Pickup
Page
Finger Pickup 70-1
Soybean Feed Cup
Soybeans/Narrow Rows 70-2
Soybeans/Regular Rows 70s3
Beans/Ft-Lb / Acre-Narrow Rows 70-4
Beans/Ft-Lb / Acre-Regular Rows 70-5
Edible Beans/Narrow Rows 70-6
Edible Beans/Regular Rows 70-7
(w/Seed Guide A48005) Small
Soybeans/Narrow Rows 70-8
(w/Seed Guide A48005) Small
Soybeans/Regular Rows 70-9
Planting Small Soybeans w/Soybean
Feed Cup 70-1 o
(Small Soybeans)
Beans/Ft-Lb / Acre-Narrow Rows 70-11
(Small Soybeans)
Beans/Ft-Lb / Acre-Regular Rows 70-12
Acid Delinted Cotton/Narrow Rows 70-13
Acid Delinted Cotton/Regular Rows 70-14
Planting Acid-Delinted Cotton
w/Soybean Feed Cup 70-15
Low Rate Sorghum Feed Cup
Sorghum (Narrow Rows) 70-16
Sorghum (Regular Rows) 70-17
Regular Rate Sorghum Feed Cup
Sorghum (Narrow Rows) 70-18
Sorghum (Regular Rows) 70-19
Edible Bean Feed Cup
Edible Beans or Large Soybeans
(Narrow Rows) 70-20
Edible Beans or Large Soybeans
(Regular Rows) 70-21
Checking Seed Population
Drive Wheel Slippage 75-3
General Attachments
Wheel Chain Trash Deflector 80-1
Drive Wheel Rock Guard 80-1
Unit Down Force Springs 80-1
Heavy-Duty Down Force Springs 80-2
Unit Mounted Coulter 80-3
Conservation Furrowers 80-4
Tine-Tooth Tillage Attachment 80-6
Heavy-Duty Closing Wheels 80-7
Rotary Scraper 80-8
Frame Mounted Coulter 80-8
Continued on next page
180790
Contents
Page
Row Leveler Chain 80-1 O
Granular Chemical Attachment
Granular Chemical Application Rates
U S Measurement 85-4
Insecticide Application-Clay Granules 85-6
Insecticide Application-Sand Granules 85-7
Herbicide Application-Clay Granules 85-8
Calibrating Insecticide/Herbicide Meter 85-9
Seed Furrow Insecticide Placement
Bracket 85-12
Insecticide Band Spreader
Front Mounted (7 in ) 85-12
Rear Mounted 85-13
Herbicide Diffuser 85-13
Windshield 85-14
Spring-Tooth lncorporator 85-14
Liquid Chemical Attachment
Liquid Herbicide Pre-Emerge Spray
Attachment 90-1
Dry Fertilizer Attachment
Checking Dry Fertilizer Rates 95-4
Storing Dry Fertilizer 95-6
Surface Applicator Bracket 95-6
Liquid Fertilizer Attachment
Quik-Fill Liquid Fertilizer Rates 100-1
Changing Fertilizer Transmission Sprocket
Combinations 100-4
Changing Driver/Driven Gear
Combinations ~ 100-5
Operating the Metering Pump 100-6
Checking Fertilizer Rates 100-7
How To Use Liquid Fertilizer Rate Charts 100-8
Ballast Tank Attachment 100-21
Double-Disk Fertilizer Opener Attachment
Double-Disk Fertilizer Openers 105-1
Single-Disk Fertilizer Opener Attachment
Setting the Gauge Wheel 110-5
Adjusting Down Force 110-6
Adjusting Cast Spout 110-8
Installing Heavy-Duty Springs 110-9
Troubleshooting
Planter {Unfolded) 115-1
iii
Page
Planter {Folded) 115-4
Vacuum Meter 115-5
Plateless Meter 115-9
Checking Solenoids 115-10
Checking Valves 115-12
Bleeding the Hydraulic Lift System 115-14
Filling Marker Hydraulic Cylinders 115-16
Lubrication
General Purpose Grease 120-1
High Temperature/Extreme Pressure
Grease 120-2
Lubrication Symbols 120-2
Roller Chain and Pesticide Gear
Lubrication 120-3
Alternative Lubricants 120-8
Special Lubricants for Vacuum Seed
Meters 120-9
Service
Practice Safe Maintenance 125-1
Bolt Torque {Metric) 125-1
Install Service Locks 125-2
Service Tires Safely 125-3
Hydraulic Line Filter Maintenance 125-3
Replacing Drill Shaft Cotter
Pins/Countershaft Shear Pins 125-4
Ratchet Drive 125-5
Marker Breakaway Bolt 125-6
Drive Wheels 125-7
Coulter Maintenance 125-7
Single-Disk Fertilizer Opener Maintenance 125-8
Cleaning Insecticide and/or Herbicide
Hoppers 125-9
Changing Vacuum Gauge Filter 125-11
Clean Vacuum Pump Motor Guard 125-12
Clean Vacuum Manifold System 125-12
Clean Vacuum Meter Drive 125-13
Vacuum Meter Inspection and Service 125-13
Vacuum Motor Inspection 125-16
Installing New Vacuum Seal 125-17
Finger Pickup Mechanism 125-17
Adjusting Gauge Wheels 125-22
Replacing Seed Opener Blades and Seed
Tube Guard 125-22
Dry Fertilizer Drive Shaft 125-24
Cleaning Dry Fertilizer Hoppers 125-24
Replacing Auger Sections 125-25
Cleaning Liquid Fertilizer Tanks 125-28
Metering Pump 125-29
Continued on next page
180790
Page
Cleaning Liquid Fert Tank Lid Fittings/Drip Line
Hoses 125-30
Storage
Beginning of the Season Service 130-1
End of Season Service 130-3
Crime Prevention Tips 135-1
Specifications
Record Planter Serial Number 140-4
Contents
iv

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

https://vimeo.com/743638811

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

I.G