Parts Manual for John Deere 7722 Combine PDF

Description

JOHN DEERE 7722 COMBINE PARTS CATALOG MANUAL – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

JOHN DEERE 7722 COMBINE PARTS CATALOG MANUAL – PDF DOWNLOAD

FOR COMBINE SEPARATOR INFORMATION, REFER TO PC-1667 FOR THE 7720 COMBINE.
FOR 6466AH-02 ENGINE AND HYDROSTATIC DRIVE INFORMATION, REFER TO PC-1668 FOR THE 8820 COMBINE.
FOR PLATFORM INFORMATION, REFER TO PC-1558 FOR THE 200 SERIES PLATFORMS.

IMPORTANT:
THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 4420 COMBINE. MACHINE VINTAGE
IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT IDENTIFICATION NUMBER (PIN).
IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.
DIRECTION ARROW:
ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. “RIGHT-HAND” AND “LEFTHAND”
SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.
BOX-ENCLOSED ILLUSTRATIONS:
A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

TABLE OF CONTENTS:

JOHN DEERE 7722 COMBINE PARTS CATALOG MANUAL – PDF DOWNLOAD

B4 ALTERNATOR, BELT 29 C16 CONNECTING LINKS, BALANCE BEAM 72
C11 ANCHOR, REAR AXLE 67 G2 CONSOLE COVER DECALS 165
D21 ARM, L H FEEDER HOUSE 106 C14 CONTROL ARM, REAR AXLE 70
F6 ARM, LIMIT SWITCHES 143 E19 CONTROL CABLE AND LINKAGE, REVERSER 130
D21 ARM, R H FEEDER HOUSE 106 B22 CONTROL, CABLE, MOUNTING, HYDRO DR 50
A23 ASPIRATOR 22 B3 CONTROL, FUEL SHUT-OFF 28
F3 AUGER, SWIVEL SHROUD, HORIZONTAL UNLDG 140 A17 CORNER FRAME 16
B17 AXLE SHAFT, FINAL DRIVE 44 B10 COUNTERSHAFT, TRANSMISSION 36
A9 COVER, ENGINE POWERSHAFT 8
D17 COVER, FEEDER BEATER DRUM 101
B C1 COVER, HYDRO DR AND LEVEL OIL
RESERVOIR 54
C16 BALANCE BEAM 72 E17 COVER, REVERSER GEAR BOX 128
F17 BASE, LEVELING SYSTEM FILTER 155 B9 COVER, TRANSMISSION AND DIFFERENTIAL HSG 35
C16 BEAM, BALANCE 72 D13 CROSS AUGER DRIVE (HS) 96
B17 BEARINGS, FINAL DRIVE 44 D15 CUTTERBAR DRIVE (HS) 98
B19 BEARINGS, FINAL DRIVE 46 D8 CUTTING PLATFORM
B12 BEARINGS, TRANSMISSION 38 HYDRAULIC LINES 90
B10 BEARINGS, TRANSMISSION COUNTERSHAFT 36 F16 CYLINDER PIN, LEVELING 154
B1 BELL CRANK 26 F16 CYLINDER SEAL KIT 154
C14 BELLCRANK, CONTROL ARM, REAR AXLE 70 C6 CYLINDERS, POWER STEERING 60
E12 BELT IDLERS, FEEDER HOUSE MIDDLE 123
B4 BELT, ALTERNATOR 29
D5 BELT, COMPRESSOR 87 D
G1 BELT, HYDROSTATIC GROUND DRIVE 164
F24 BELTS, ENGINE 162 D15 DECAL, DRIVE SHAFT(HS) 98
G1 BELTS, LEVELING SYSTEM DRIVE 164 D13 DECAL, DRIVESHAFT 96
E1 BOTTOM SHEETS, FEEDER HOUSE 110 D3 DECAL, L H LOWER DOOR 84
E12 BRACE, FEEDER HOUSE MIDDLE BELT 123 G2 DECALS, CONSOLE COVER 165
E22 BRACE, GRAIN TANK 134 G2 DECALS, INSTRUMENT PANEL 165
C1 BRACE, HYDRO DR AND LEVEL OIL G3 DECALS, LEFT-HAND 166
RESERVOIR 54 G3 DECALS, RIGHT-HAND 166
E7 BRACKET, FEEDER CONVEYOR 116 C24 DECK, LADDER, FRONT 80
E22 BRACKET, GRAIN TANK 134 B16 DIFFERENTIAL 42
D3 BRACKET, L H LOWER DOOR 84 B16 DIFFERENTIAL GEARS 42
F3 BRACKET, UNLOADING AUGER SWIVEL SHROUD 140 B16 DIFFERENTIAL HOUSING 42
C4 BRAKE LINES 58 B16 DIFFERENTIAL SHAFTS 42
B14 BRAKE, PARKING 40 E17 DIPSTICK, REVERSER GEAR BOX 128
C3 BRAKES, WHEEL 57 C3 DISC, WHEEL BRAKES 57
A9 BRUSH, ENGINE POWERSHAFT 8 E24 DOOR, ELEVATOR ACCESS, GRAIN TANK 136
D23 DOOR, FEEDER HOUSE TOP SHEETS 108
E24 DOOR, GRAIN TANK 136
C E22 DOOR, INSPECTION, GRAIN TANK 134
D3 DOOR, LOWER, L H 84
D1 CAB DOORS 82 A19 DOOR, MIDDLE, ENGINE COMPARTMENT 18
B22 CABLE MOUNTING, HYDRO DRIVE CONTROL 50 E24 DOOR, RESERVOIR, GRAIN TANK 136
B1 CABLE SUPPORTS 26 D1 DOORS, CAB 82
D3 CABLE, L H LOWER DOOR 84 D15 DRIVE SHAFT DECAL (HS) 98
E19 CABLE, REVERSER CONTROL 130 D13 DRIVE SHAFT, DECAL 96
F22 CABLES AND MOUNTING, PLATFORM LEVELING D11 DRIVE SHAFT, PLATFORM 94
(L H ) 160 B5 DRIVE WHEELS 31
F20 CABLES AND MTG , PLATFORM LEVELING D15 DRIVE, CUTTERBAR (HS) 98
(R H ) 158 D18 DRIVE, FEEDER BEATER 103
C3 CALIPER PAD, WHEEL BRAKES 57 E12 DRIVE, FEEDER HOUSE 123
C3 CALIPER, WHEEL BRAKES 57 D19 DRIVES, FEEDER BEATER 104
E8 CHAIN GUIDES, FEEDER CONVEYOR DRIVE 117 A11 DRIVES, RADIATOR FAN 10
D18 CHAIN, FEEDER BEATER DRIVE 103 D17 DRUM, FEEDER BEATER 101
E6 CHAIN, FEEDER CONVEYOR 115 E5 DRUM, FEEDER CONVEYOR 114
E7 CHAIN, FEEDER CONVEYOR 116 C23 DUCT, FAN 79
C16 CLEVIS, CONNECTING LINK, BALANCE BEAM 72
4 7722 COMBINE PC2088 (19-MAY-87)
PN=4
A6
7722 COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
E B17 FINAL DRIVE PLANETARY PINION 44
B21 FINAL DRIVE SHAFT 49
A19 ENGINE COMPARTMENT FRAME 18 D16 FINGERS, FEEDER BEATER 100
A19 ENGINE COMPARTMENT MIDDLE DOOR 18 A15 FIREWALL 14
A9 ENGINE POWERSHAFT 8 C15 FRAME 71
F24 ENGINE SHEAVES 162 A17 FRAME, CORNER 16
F24 ENGINE, BELT 162 A19 FRAME, ENGINE COMPARTMENT 18
F24 ENGINE, TIGHTENERS 162 E3 FRAME, FEEDER HOUSE 112
A23 EXHAUST PIPE 22 D10 FRAME, PLATFORM 92
D21 EXTENSION, FEEDER HOUSE 106 C9 FRAME, REAR AXLE 64
F1 EXTENSION, FRONT, GRAIN TANK 138 A17 FRONT PANEL 16
F1 EXTENSION, L H , GRAIN TANK 138 B3 FUEL SHUT-OFF CONTROL 28
F1 EXTENSION, R H , GRAIN TANK 138 F8 FUSE, LEVELING CAB 146
F1 EXTENSION, REAR, GRAIN TANK 138
F1 EXTENSIONS, GRAIN TANK 138
G
F B9 GASKET,TRANSMISSION AND DIFFERENTIAL HSG 35
B16 GEARS, DIFFERENTIAL 42
B6 FAN DRIVE SHIELD 32 B19 GEARS, FINAL DRIVE 46
C23 FAN DUCT 79 B12 GEARS, TRANSMISSION 38
A15 FAN SHROUD 14 B10 GEARS, TRANSMISSION COUNTERSHAFT 36
A11 FAN, RADIATOR 10 E22 GRAIN TANK 134
D18 FEEDER BEATER DRIVE 103 F1 GRAIN TANK EXTENSIONS 138
D19 FEEDER BEATER DRIVE SHIELDS 104 E24 GRAIN TANK, SKIRTS 136
D18 FEEDER BEATER DRIVE, HUB 103 A24 GREASE CUP, AIR CLEANER 23
D18 FEEDER BEATER DRIVE, SLIP CLUTCH 103
D19 FEEDER BEATER DRIVES 104
D17 FEEDER BEATER DRUM 101 H
D16 FEEDER BEATER FINGERS 100
D16 FEEDER BEATER HEADS 100 E1 HANDLE, FEEDER HOUSE BOTTOM SHEETS 110
D16 FEEDER BEATER SHAFTS 100 D1 HANDLES, CAB DOORS 82
D16 FEEDER BEATER SHIELDS 100 A19 HANDRAIL, DOOR, ENGINE COMPARTMENT 18
E7 FEEDER CONVEYOR BRACKET 116 C24 HANDRAIL, L H DOOR 80
E6 FEEDER CONVEYOR CHAIN 115 F8 HARNESS, LEVELING CAB 146
E7 FEEDER CONVEYOR DRIVE CHAIN 116 F10 HARNESS, WIRING, LEVELING SYSTEM 148
E8 FEEDER CONVEYOR DRIVE CHAIN GUIDES 117 D16 HEADS, FEEDER BEATER 100
E5 FEEDER CONVEYOR FEEDER DRUM 114 E24 HINGE, GRAIN TANK 136
E7 FEEDER CONVEYOR IDLER 116 C9 HITCH, REAR AXLE 64
E5 FEEDER CONVEYOR IDLER SHAFT 114 D10 HOOD, PLATFORM 92
E1 FEEDER HOUSE BOTTOM SHEETS 110 F3 HORIZONTAL UNLOADING AUGER SWIVEL SHROUD 140
E12 FEEDER HOUSE DRIVE 123 A25 HOSE, AIR INTAKE 25
D21 FEEDER HOUSE EXTENSION 106 A23 HOSE, ASPIRATOR 22
E3 FEEDER HOUSE FRAME 112 F18 HOSES, LEVELING SYSTEM 156
E15 FEEDER HOUSE LOWER MOUNTINGS 126 A13 HOSES, RADIATOR 12
E15 FEEDER HOUSE LOWER SHAFT 126 B16 HOUSING, DIFFERENTIAL 42
E15 FEEDER HOUSE LOWER SHEAVE 126 A9 HOUSING, ENGINE POWERSHAFT 8
E12 FEEDER HOUSE MIDDLE BELT BRACE 123 B19 HOUSING, INNER, FINAL DRIVE 46
E12 FEEDER HOUSE MIDDLE BELT IDLERS 123 B14 HOUSING, PARKING BRAKE 40
D21 FEEDER HOUSE ROCKER 106 E17 HOUSING, REVERSER GEAR BOX 128
E9 FEEDER HOUSE SHIELD,(R H ) 119 C12 HOUSING, SPINDLE, REAR WHEELS 68
E10 FEEDER HOUSE SHIELDS (L H ) 120 B8 HOUSING, TRANSM AND DIFFERENTIAL 34
E3 FEEDER HOUSE SIDE SHEETS 112 D18 HUB, FEEDER BEATER DRIVE 103
D23 FEEDER HOUSE TOP SHEETS 108 C12 HUB, REAR WHEELS 68
E13 FEEDER HOUSE UPPER SHAFT 124 D8 HYDRAULIC LINES
E13 FEEDER HOUSE UPPER SPROCKETS 124 CUTTING PLATFORM 90
A24 FILTER, AIR CLEANER 23 B22 HYDROSTATIC DRIVE CONTROL CABLE MOUNTING 50
C1 FILTER, HYDRO DR AND LEVEL OIL C1 HYDROSTATIC DRIVE OIL RESERVOIR 54
RESERVOIR 54 C1 HYDROSTATIC DRIVE OIL RESERVOIR MTG 54
F17 FILTERS, LEVELING SYSTEM 155 B24 HYDROSTATIC DRIVE UNIT 53
B17 FINAL DRIVE AXLE SHAFT 44 B24 HYDROSTATIC DRIVE UNIT SHEAVES 53
B17 FINAL DRIVE BEARINGS 44 B24 HYDROSTATIC DRIVE UNIT SUPPORTS 53
B19 FINAL DRIVE BEARINGS 46 G1 HYDROSTATIC GROUND DRIVE BELTS 164
B19 FINAL DRIVE GEARS 46 G1 HYDROSTATIC GROUND DRIVE SHEAVES 164
B19 FINAL DRIVE INNER HOUSING 46 B6 HYDROSTATIC GROUND DRIVE SHIELD 32
B17 FINAL DRIVE OUTER HOUSING 44
B19 FINAL DRIVE PINION SHAFT 46
7722 COMBINE PC2088 (19-MAY-87) 5
PN=5
A7
7722 COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
I F22 MOUNTING, CABLES, PLATFORM LEVELING
(L H ) 160
E7 IDLER, FEEDER CONVEYOR DRIVE CHAIN 116 F20 MOUNTING, CABLES, PLATFORM LEVELING
A11 IDLER, RADIATOR 10 (R H ) 158
E12 IDLERS, FEEDER HOUSE MIDDLE BELT 123 D5 MOUNTING, COMPRESSOR 87
B10 INPUT SHAFT, TRANSMISSION 36 B22 MOUNTING,HYDROSTATIC DRIVE CONTROL CABLE 50
G2 INSTRUMENT PANEL DECALS 165 E15 MOUNTINGS, FEEDER HOUSE, LOWER 126
F1 ISOLATOR, WINDOW, GRAIN TANK EXTENSION 138 C1 MTG, HYDRO DR AND LEVELING OIL
RESERVOIR 54
A23 MUFFLER 22
K
F14 KIT, LEVELING SYSTEM 152 O
F16 KIT, SEAL, CYLINDER 154
C7 KIT, STEERING CYLINDER 61 C1 OIL RESERVOIR, HYDRO DR AND LEVELING 54
E22 KNOB, GRAIN TANK 134 B17 OUTER HOUSING, FINAL DRIVE 44
L P
C24 LADDER, FRONT 80 A17 PANEL, FRONT 16
E22 LATCH, GRAIN TANK 134 E24 PANEL, GRAIN TANK 136
G3 LEFT-HAND DECALS 166 B14 PARKING BRAKE 40
C1 LENS, HYDRO DR AND LEVEL OIL B14 PARKING BRAKE HOUSING 40
RESERVOIR 54 F16 PIN, LEVELING CYLINDER 154
F8 LEVELING CAB FUSE 146 B12 PINION SHAFT, TRANSMISSION 38
F8 LEVELING CAB HARNESS 146 D19 PIVOT SHAFT, FEEDER BEATER DRIVE 104
F8 LEVELING CAB LIGHTS 146 D19 PIVOT, FEEDER BEATER DRIVE 104
F8 LEVELING CAB SWITCH 146 B17 PLANETARY PINION, FINAL DRIVE 44
F22 LEVELING CABLES AND MOUNTING, PLATFORM F3 PLATE, UNLOAING AUGER SWIVEL SHROUD 140
(L H ) 160 C3 PLATE, WHEEL BRAKES 57
F20 LEVELING CABLES AND MTG , PLATFORM D11 PLATFORM DRIVE SHAFT 94
(R H ) 158 D10 PLATFORM FRAME 92
F5 LEVELING CONTROL SWITCH BOX 142 D10 PLATFORM HOOD 92
F16 LEVELING CYLINDER 154 F22 PLATFORM LEVELING CABLES AND MOUNTING
C1 LEVELING OIL RESERVOIR 54 (L H ) 160
C1 LEVELING OIL RESERVOIR MTG 54 F20 PLATFORM LEVELING CABLES AND MOUNTING
F7 LEVELING SOLENOID VALVE 145 (R H ) 158
F12 LEVELING SYSTEM 150 C6 POWER STEERING CYLINDERS 60
G1 LEVELING SYSTEM DRIVE BELTS 164 A9 POWERSHAFT, ENGINE 8
G1 LEVELING SYSTEM DRIVE SHEAVES 164 A22 PRECLEANER 21
F17 LEVELING SYSTEM FILTER SWITCH 155 A25 PRESSURE SWITCH, AIR INTAKE 25
F17 LEVELING SYSTEM FILTERS 155 F12 PUMP, LEVELING SYSTEM 150
F18 LEVELING SYSTEM HOSES 156
F18 LEVELING SYSTEM LINES 156
F12 LEVELING SYSTEM PUMP 150 R
F11 LEVELING SYSTEM TESTER 149
F10 LEVELING SYSTEM WIRING HARNESS 148 C23 R H SEPARATOR SHIELD 79
F14 LEVELING SYSTEM, KIT 152 A13 RADIATOR 12
D23 LEVER, DOOR, FEEDER HOUSE TOP SHEETS 108 A11 RADIATOR FAN 10
F8 LIGHTS, LEVELING CAB 146 A11 RADIATOR FAN DRIVES 10
F6 LIMIT SWITCH ARM 143 A13 RADIATOR HOSES 12
F6 LIMIT SWITCHES 143 C24 RAILINGS 80
D6 LINES, AIR CONDITIONER 88 C11 REAR AXLE 67
C4 LINES, BRAKE 58 C14 REAR AXLE CONTROL ARM 70
F18 LINES, LEVELING SYSTEM 156 C9 REAR AXLE FRAME 64
E19 LINKAGE, REVERSER CONTROL CABLE 130 C9 REAR AXLE SUPPORT 64
B1 LINKAGE, THROTTLE 26 C12 REAR WHEELS AND SPINDLES 68
C16 LINKS, CONNECTING, BALANCE BEAM 72 D6 RECEIVER 88
D3 LOWER DOOR, L H 84 E22 REINFORCEMENT, GRAIN TANK 134
E19 REVERSER CONTROL CABLES AND LINKAGE 130
E17 REVERSER GEAR BOX 128
M G3 RIGHT-HAND DECALS 166
D21 ROCKER, FEEDER HOUSE 106
A21 MANIFOLD SHIELD 20 E24 ROD, HINGE, GRAIN TANK 136
F5 MERCURY SWITCH 142
6 7722 COMBINE PC2088 (19-MAY-87)
PN=6
A8
7722 COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
S C1 SUPPORT, HYDRO DR AND LEVEL OIL
RESERVOIR 54
D11 SAFETY CHAIN, PLATFORM DRIVE SHAFT 94 C9 SUPPORT, REAR AXLE 64
D1 SEALS, CAB DOORS 82 F3 SUPPORT, UNLOADING AUGER SWIVEL SHROUD 140
C22 SEPARATOR RIGHT-HAND SHIELD 78 B1 SUPPORTS, CABLE 26
C21 SEPARATOR SIDE SHEET, L H 77 D5 SUPPORTS, COMPRESSOR 87
C20 SEPARATOR SIDE SHEET, R H 76 B24 SUPPORTS, HYDROSTATIC DRIVE UNIT 53
D13 SHAFT, CROSS AUGER DRIVE (HS) 96 C18 SWING ARMS 74
E5 SHAFT, FEEDER CONVEYOR IDLER 114 F5 SWITCH BOX, LEVELING CONTROL 142
E15 SHAFT, FEEDER HOUSE LOWER 126 F8 SWITCH, LEVELING CAB 146
B19 SHAFT, FINAL DRIVE 46 F17 SWITCH, LEVELING SYSTEM FILTERS 155
B21 SHAFT, FINAL DRIVE 49 F6 SWITCHES, LIMIT 143
E13 SHAFT, UPPER, FEEDER HOUSE 124 F3 SWIVEL SHROUD, HORIZONTAL UNLDG AUGER 140
B16 SHAFTS, DIFFERENTIAL 42
D16 SHAFTS, FEEDER BEATER 100
B4 SHEAVE, ALTERNATOR 29 T
D15 SHEAVE, CUTTERBAR DRIVE (HS) 98
A9 SHEAVE, ENGINE POWERSHAFT 8 E22 TANK, GRAIN 134
E15 SHEAVE, FEEDER HOUSE LOWER 126 F11 TESTER, LEVELING SYSTEM 149
B24 SHEAVE, HYDROSTATIC DRIVE UNIT 53 B1 THROTTLE LINKAGE 26
F24 SHEAVES, ENGINE 162 C8 TIE RODS, STEERING 63
G1 SHEAVES, HYDROSTATIC GROUND DRIVE 164 F24 TIGHTENERS, ENGINE 162
G1 SHEAVES, LEVELING SYSTEM DRIVE 164 B8 TRANSM AND DIFFERENTIAL SHIFTER FORKS 34
F3 SHEET, FRONT, UNLDG AUGER SWIVEL SHROUD 140 B9 TRANSMISSION AND DIFFERENTIAL HSG
E24 SHEET, GRAIN TANK 136 SHIFTER CAM 35
F3 SHEET, SIDE, UNLDG AUGER SWIVEL SHROUD 140 B9 TRANSMISSION AND DIFFERENTIAL HSG GASKET 35
E1 SHEETS, BOTTOM, FEEDER HOUSE 110 B8 TRANSMISSION AND DIFFERENTIAL HSG 34
D23 SHEETS, TOP, FEEDER HOUSE 108 B9 TRANSMISSION AND DIFFERENTIAL HSG COVER 35
A21 SHIELD MANIFOLD 20 B12 TRANSMISSION BEARINGS 38
D13 SHIELD, CROSS AUGER DRIVE (HS) 96 B12 TRANSMISSION GEARS 38
D15 SHIELD, CUTTERBAR DRIVE (HS) 98 B12 TRANSMISSION PINION SHAFT 38
B6 SHIELD, FAN DRIVE 32 B10 TRANSMISSION, COUNTERSHAFT 36
B6 SHIELD, HYDROSTATIC GROUND DRIVE 32 B10 TRANSMISSION, GEARS AND BEARINGS 36
D11 SHIELD, PLATFORM DRIVE SHAFT 94 B10 TRANSMISSION, INPUT SHAFT 36
C23 SHIELD, SEPARATOR, R H 79 C11 TUBE, REAR AXLE 67
C22 SHIELD, SEPARATOR, RIGHT-HAND 78 A22 TUBES, AIR INTAKE 21
E9 SHIELD,FEEDER HOUSE,(R H ) 119 A25 TUBES, AIR INTAKE 25
D16 SHIELDS, FEEDER BEATER 100
D19 SHIELDS, FEEDER BEATER DRIVE 104
E10 SHIELDS, FEEDER HOUSE (L H ) 120 U
B9 SHIFTER CAM, TRANSMISSION AND
DIFFERENTIAL HOUSING 35 F3 UNLDG AUGER, SWIVEL SHROUD, HORIZONTAL 140
B8 SHIFTER FORKS,TRANSM AND DIFFERENTIAL 34
A15 SHROUD, FAN 14
F3 SHROUD, SWIVEL, HORIZONTAL UNLDG AUGER 140 V
B3 SHUT-OFF CONTROL, FUEL 28
C21 SIDE SHEET, SEPARATOR, L H 77 F7 VALVE, SOLENOID, LEVELING 145
C20 SIDE SHEET, SEPARATOR, R H 76
E3 SIDE SHEETS, FEEDER HOUSE 112
E24 SKIRTS, GRAIN TANK 136 W
D18 SLIP CLUTCH, FEEDER BEATER 103
D18 SLIP CLUTCH, FEEDER BEATER DRIVE 103 C3 WHEEL BRAKES 57
F7 SOLENOID VALVE, LEVELING 145 B5 WHEELS, DRIVE 31
C12 SPINDLE, L H , REAR WHEELS 68 F1 WINDOW, GRAIN TANK EXTENSION 138
C12 SPINDLE, R H , REAR WHEELS 68 F10 WIRING HARNESS, LEVELING SYSTEM 148
C12 SPINDLES AND REAR WHEELS 68
E22 SPRING, LATCH, GRAIN TANK 134
D13 SPROCKET, CROSS AUGER DRIVE (HS) 96 Y
D19 SPROCKET, FEEDER BEATER 104
E7 SPROCKET, FEEDER CONVEYOR DRIVE CHAIN 116 B21 YOKE, FINAL DRIVE SHAFT 49
E13 SPROCKET, UPPER, FEEDER HOUSE 124 D11 YOKE, PLATFORM DRIVE SHAFT 94
C7 STEERING CYLINDER KIT 61
C8 STEERING TIE RODS 63
C1 STRAINER, HYDRO DR AND LEVEL OIL
RESERVOIR 54
E22 STRAP, GRAIN TANK 134

Need help? Contact: [email protected]

https://vimeo.com/743307940

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

I.G