Parts List Manual for John Deere CTS II Combine & 900 Series Platform PDF

Description

JOHN DEERE CTS II COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

DESCRIPTION:

JOHN DEERE CTS II COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

JOHN DEERE CTS II (1998- )

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS
CATALOG – PC-2104.
FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS
CATALOG – PC-1223.
FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD
PARTS CATALOG – PC-1747.
FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP
PARTS CATALOG – PC-2210.
FOR 918 AND 920 DRAPER PARTS INFORMATION, REFER TO JOHN DEERE 918 AND 920 DRAPER PLATFORMS
PARTS CATALOG – PC-2212.
FOR 90 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 90 SERIES CORN HEAD PARTS
CATALOG – PC-2404.

TABLE OF CONTENTS:

JOHN DEERE CTS II COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

SECTION 10 – GENERAL INFORMATION
SECTION 20 – ENGINE FAN, INTERCOOLER AND SCREENS
SECTION 24 – ENGINE
SECTION 30 – FUEL AND AIR
SECTION 40 – ELECTRICAL
SECTION 50 – POWER TRAIN
SECTION 60 – STEERING AND BRAKES
SECTION 70 – HYDRAULICS
SECTION 80 – SEPARATOR SHELL
SECTION 90 – OPERATOR’S STATION
SECTION 110 – FEEDER HOUSE
SECTION 120 – THRESHING AND SEPARATION
SECTION 121 – DRIVES
SECTION 125 – RESIDUE DISPOSAL
SECTION 130 – CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER
SECTION 160 – DIAL-A-MATIC HEADER HEIGHT CONTROL
SECTION 170 – DECALS, BELTS AND CHAINS
SECTION 180 – NUMERICAL INDEX

3G20 A/C COMPRESSOR COVER R134A 90 – 79 1E15 ALTERNATOR SUPPORT 24 – 62
3G19 A/C COMPRESSOR HOSE 90 – 77 1I5 ALTERNATOR, SHEAVE AND BELT – BOSCH 40 – 66
3G18 A/C COMPRESSOR MANIFOLD R134A 90 – 76 5C13 ANGLES, GRAIN TANK EXTENSIONS 130 – 34
3G20 A/C COMPRESSOR PULLEY R134A 90 – 79 1G16 ANTENNA, SPEAKERS AND RADIO 40 – 28
3G18 A/C COMPRESSOR R134A 90 – 76 4G3 ARM, LOCKOUT, DUAL-RANGE 121 – 38
3G22 A/C COMPRESSOR SEAL KIT R134A 90 – 81 3C1 ARM, REAR LADDER LANDING LATCH 80 – 20
3G18 A/C COMPRESSOR SEAL R134A 90 – 76 2D9 ARM, STEERING 50 – 56
2J13 A/C CONDENSER AND OIL COOLER 70 – 74 3G3 ARMREST (L H ) 90 – 60
1B21 A/C CONDENSER, RADIATOR 20 – 18 3G1 ARMREST ADJUSTING MECHANISM, (R H ) 90 – 58
1E15 ACCESS COVER FUEL INJECTION PUMP 24 – 62 1G3 ARMREST CONTROL PANEL 40 – 14
3C7 ACCESS DOOR, REAR HOOD AND STOP 80 – 26 1G1 ARMREST WIRING HARNESS 40 – 12
3B21 ACCESS PLATFORM AND STEP, ENGINE 80 – 16 3F23 ARMREST WITH GLOVE BOX (R H ) 90 – 56
3C22 ACCESS SHIELD, SERVICE, L H 80 – 42 4D11 ARMS, FRAME, PRECLEANER CHAFFER 120 – 56
3C20 ACCESS SHIELD, SERVICE, R H 80 – 40 1C23 ARMS, ROCKER 24 – 20
2I4 ACCUMULATOR AND MOUNTING, ONE GALLON 70 – 40 1E11 ASSEMBLY, CLUTCH (STARTER) 24 – 58
2I2 ACCUMULATOR AND MOUNTING, ONE HALF 2C14 ASSEMBLY, HYDROSTATIC DRIVE PISTON 50 – 34
GALLON, SINGLE 70 – 38 2I22 ASSEMBLY, SIX STACK SOLENOID CONTROL
2G14 ACCUMULATOR PRESSURE GAUGE AND WIRING VALVE 70 – 58
HARNESS 70 – 2 2F5 ATTENUATOR,UPPER, HYDRAULIC STEERING
1D5 ADAPTER, OIL COOLER 24 – 27 HOSES 60 – 18
1D4 ADAPTER, OIL COOLER BYPASS 24 – 26 5E3 AUGER BELTS 170 – 2
1H1 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 – 38 4J18 AUGER CHAIN TIGHTENER, LOWER TAILINGS 125 – 42
1H3 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 – 40 4C19 AUGER CLEANOUT DOOR, SHOE GRAIN SUPPLY,
1C24 ADHESIVE,ROCKER ARM COVER GASKET 24 – 21 HANDLES AND LATCHES 120 – 38
3F9 ADJUST FORE-AND-AFT, SEAT 90 – 42 4J24 AUGER DRIVE SHIELD, UPPER TAILINGS 125 – 50
2F21 ADJUSTABLE REAR AXLE 60 – 34 3C15 AUGER DRIVE SHIELDS (R-H SIDE) 80 – 34
2G5 ADJUSTABLE REAR AXLE STEERING TIE RODS 60 – 44 4J19 AUGER DRIVE TIGHTENER, LOWER TAILINGS 125 – 44
3F11 ADJUSTER, CAB SEAT HEIGHT 90 – 44 4J24 AUGER DRIVE, UPPER TAILINGS 125 – 50
4G11 ADJUSTING BRACKET, CYLINDER DRIVE, 5B17 AUGER HOUSING, LOADING, UPPER CLEAN
DUAL-RANGE 121 – 46 GRAIN 130 – 12
1I7 ADJUSTING MOTOR, CONCAVE 40 – 68 5B19 AUGER HOUSING, LOADING, UPPER CLEAN
1I4 ADJUSTING MOTOR, SEPARATOR FAN DRIVE 40 – 65 GRAIN 130 – 14
4J1 ADJUSTING SCREW KIT, REEL DRIVE FLOW 1I1 AUGER LIGHT, UNLOADING, GRAIN TANK 40 – 62
CONTROL VALVE 125 – 25 5C15 AUGER LOWER GEAR CASE, VERTICAL 130 – 36
1F1 AIR CLEANER AND INTAKE TUBES 30 – 8 1H9 AUGER SENSOR AND WIRING HARNESS,
1G9 AIR CONDITIONER AND HEATER SWITCH 40 – 20 UNLOADING 40 – 46
1E13 AIR CONDITIONER COMPRESSOR FAN PULLEY 24 – 60 5C21 AUGER SWIVEL SUPPORT AND BRACES 130 – 42
1E13 AIR CONDITIONER COMPRESSOR IDLER PULLEY 24 – 60 5C19 AUGER SWIVEL, HORIZONTAL UNLOADING 130 – 40
1E13 AIR CONDITIONER COMPRESSOR SUPPORT 24 – 60 5B17 AUGER TRANSITION HOUSING 130 – 12
1G7 AIR CONDITIONER WIRING HARNESS 40 – 18 4J12 AUGER TROUGH, LOWER TAILINGS 125 – 36
3E20 AIR CONDITIONING AND HEATER DUCTS 90 – 29 1H9 AUGER WIRING HARNESS, UNLOADING 40 – 46
3G10 AIR CONDITIONING AND HEATER HOUSING 5B7 AUGER, CLEAN GRAIN LOWER AND HINGED DOOR 130 – 2
FILTERS 90 – 68 5D13 AUGER, CROSS, COVERS AND CHANNEL 130 – 60
3G14 AIR CONDITIONING SYSTEM 90 – 72 5D7 AUGER, HORIZONTAL UNLOADING
3G16 AIR CONDITIONING SYSTEM, COMPRESSOR (17- AND 20-FT ) 130 – 54
R134A 90 – 74 5C25 AUGER, HORIZONTAL UNLOADING, DRIVE
3G12 AIR CONDITIONING/HEATER AND PRESSURIZER GEARCASE 130 – 46
FAN 90 – 70 5C23 AUGER, HORIZONTAL UNLOADING, HUB SUPPORT
3E19 AIR FILTER AND HOUSING, CAB 90 – 28 AND SWITCH 130 – 44
1H19 AIR FILTER WARNING SWITCH,ENGINE PLUGGED 40 – 56 5B21 AUGER, LOADING, CLEAN GRAIN 130 – 16
1B21 AIR INTER COOLER, RADIATOR 20 – 18 5B23 AUGER, LOADING, CLEAN GRAIN FOLD 130 – 18
3F13 AIR SEAT SUSPENSION 90 – 46 5E4 AUGER, LOWER TAILINGS, BELTS 170 – 3
3F15 AIR SEAT SUSPENSION KITS 90 – 48 4J10 AUGER, LOWER TAILINGS, SHAFT AND
3F17 AIR SEAT SUSPENSION KITS 90 – 50 TIGHTENER 125 – 34
3F19 AIR SEAT SUSPENSION KITS 90 – 52 5D14 AUGER, UNLOADING, COUNTERSHAFT DRIVE 130 – 62
3F21 AIR SEAT SUSPENSION KITS 90 – 54 5D16 AUGER, UNLOADING, DRIVE BELT GUIDE 130 – 64
1G7 AIR SEAT WIRING HARNESS 40 – 18 5D19 AUGER, UNLOADING, LUBE BANK 130 – 68
3F15 AIR SUSPENSION KITS, SEAT 90 – 48 4J24 AUGER, UPPER TAILINGS 125 – 50
3F17 AIR SUSPENSION KITS, SEAT 90 – 50 4J21 AUGER, UPPER TAILINGS, HOUSING AND
3F19 AIR SUSPENSION KITS, SEAT 90 – 52 PADDLE ASSEMBLY 125 – 46
3F21 AIR SUSPENSION KITS, SEAT 90 – 54 5C17 AUGER, VERTICAL UNLOADING AND CHARGE
3F13 AIR SUSPENSION, SEAT 90 – 46 HOUSING 130 – 38
1E15 ALTERNATOR ADJUSTING STRAP 24 – 62 5D11 AUGERS, GRAIN TANK CROSS 130 – 58
1I6 ALTERNATOR AND VOLTAGE REGULATOR (95 4C22 AUGERS, SHOE GRAIN SUPPLY AND HOUSING 120 – 42
AMP), BOSCH 40 – 67 4C20 AUGERS, SUPPLY, SHOE GRAIN AND HOUSING 120 – 40
10-10 CTS II COMBINE PC2752 (30-MAY-00)
PN=10
1A12
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1F17 AUX FIELD LIGHT SWITCH, OPTIONAL 40 – 4 5E4 BELTS, ROTARY SCREEN 170 – 3
1F23 AUXILIARY FIELD LIGHTING 40 – 10 5E5 BELTS, STRAW CHOPPER 170 – 4
2B16 AXLE SPACERS 50 – 10 5E5 BELTS, STRAW SPREADER 170 – 4
2C5 AXLE, FINAL DRIVE 50 – 24 5E5 BELTS, UNLOADING AUGERS 170 – 4
2F22 AXLE, FIXED REAR (GRAIN) 60 – 35 5E6 BELTS, UNLOADING SYSTEM 170 – 5
2B15 AXLE, FRONT 50 – 9 5E6 BELTS, UPPER TAILINGS AUGER 170 – 5
2F21 AXLE, REAR, ADJUSTABLE 60 – 34 5E3 BELTS, WALKER 170 – 2
2G1 AXLE, REAR, SPINDLES 60 – 40 2I16 BI-DIRECTIONAL MODULE, SOLENOID CONTROL
2F23 AXLE, REAR, SUPPORT 60 – 36 VALVE, REEL LIFT AND CYLINDER SPEED 70 – 52
1B17 BLOCK, ENGINE, COOLANT HEATER 20 – 14
1C9 BLOCK, SHORT 24 – 6
B 1C21 BOLTS, CYLINDER HEAD 24 – 18
1I6 BOSCH ALTERNATOR AND VOLTAGE REGULATOR 40 – 67
3F5 BACKREST AND SEAT, OPERATOR’S 90 – 38 1I5 BOSCH ALTERNATOR, SHEAVE AND BELT 40 – 66
1J15 BACKSHAFT SPEED SENSOR, FEEDER HOUSE 40 – 100 3E13 BOX, TOOL 90 – 22
5D19 BANK, LUBE, UNLOADING AUGER 130 – 68 5C21 BRACES AND SWIVEL SUPPORT, AUGER 130 – 42
1E3 BASE, FUEL FILTER 24 – 50 1E15 BRACKET, ALTERNATOR 24 – 62
1D6 BASE, OIL FILTER 24 – 28 2E24 BRACKET, BRAKE CABLE SUPPORT 60 – 13
1I13 BATTERIES, CABLE AND HOLDDOWN 40 – 74 1I11 BRACKET, REEL SPEED MOTOR 40 – 72
4E7 BEARING AND LUBE LINES, MODULE FRONT 120 – 78 4J17 BRACKET, TAILINGS DRIVE AND LOWER
2C4 BEARING CAP, FINAL DRIVE 50 – 23 TROUGH SUPPORT 125 – 41
1E17 BEARING KIT, UNDERSIZED MAIN BEARING 4C1 BRACKETS, CONCAVE INDICATOR AND CABLE 120 – 20
CRANKSHAFT 24 – 64 1H13 BRACKETS, LOW SHAFT SPEED SENSORS 40 – 50
5D9 BEARING PLATE, CROSS AUGER, L H 130 – 56 2J20 BRACKETS, SOLENOID CONTROL VALVE 70 – 81
2D4 BEARING, COVER AND QUILL 50 – 51 2E24 BRAKE CABLE SUPPORT BRACKET 60 – 13
1C16 BEARING, THRUST 24 – 13 2E15 BRAKE CYLINDERS, MASTER AND BRAKE PEDALS 60 – 4
4J16 BEARINGS, CHAIN AND SPROCKETS, TAILINGS 2E17 BRAKE LINES, MASTER CYLINDER AND
ELEVATOR CONVEYOR 125 – 40 RESERVOIR 60 – 6
2C5 BEARINGS, FINAL DRIVE 50 – 24 2E19 BRAKE MASTER CYLINDER 60 – 8
2C7 BEARINGS, FINAL DRIVE 50 – 26 2E13 BRAKE PEDAL AND SEAL, PARKING 60 – 2
1C16 BEARINGS, MAIN 24 – 13 2E15 BRAKE PEDALS AND CYLINDERS, MASTER 60 – 4
2C24 BEARINGS, SEALS, SHAFT AND OUTER COVER 2E21 BRAKE SHOES AND DRUM 60 – 10
CAM LOBE MOTOR 50 – 46 2E23 BRAKE SLAVE CYLINDER 60 – 12
2B22 BEARINGS, TRANSMISSION INPUT SHAFT 50 – 16 1I15 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 40 – 76
2B24 BEARINGS, TRANSMISSION PINION SHAFT 50 – 18 1C6 BUSHING, CAMSHAFT 24 – 2
5E6 BEATER BELTS SHEAVES 170 – 5 1C20 BUSHING, CAMSHAFT 24 – 17
4C17 BEATER COVER 120 – 36 1D4 BYPASS TUBES, OIL COOLER 24 – 26
4C11 BEATER DRIVE BELT IDLER 120 – 30 1D6 BYPASS VALVE, OIL FILTER 24 – 28
4C13 BEATER DRIVE CONVERSION, DUAL SPEED
700/400 RPM 120 – 32
4C15 BEATER GEARCASE AND SHEAVE 120 – 34 C
4B16 BEATER GRATE AND 13-BAR CONCAVE ASSEMBLY 120 – 10
4C9 BEATER SHAFT AND DRIVE BELT 120 – 28 3E19 CAB AIR FILTER AND HOUSING 90 – 28
4C7 BEATER, STRIPPER 120 – 26 1F14 CAB DOME LIGHT 40 – 1
4C5 BEATER, STRIPPER, DRIVE IDLER 120 – 24 3E3 CAB DOOR AND GLASS 90 – 12
1B10 BELT ,ENGINE FAN 20 – 6 3E1 CAB DOOR LATCH 90 – 10
5D16 BELT GUIDE, UNLOADING AUGER DRIVE 130 – 64 3E5 CAB FRAME AND SUPPORT 90 – 14
4H3 BELT PICKUP/REEL CHARGE PUMP MOUNTING 3H1 CAB HARDWARE KIT 90 – 84
AND SHEAVE 121 – 62 3D23 CAB INTERIOR TRIM PANELS 90 – 8
1E15 BELT TENSIONER (ALT ) 24 – 62 3E15 CAB L H LANDING AND MIRROR 90 – 24
3J1 BELT, FAN, DUST, LH FEEDER HOUSE 110 – 48 3E17 CAB LANDING AND MIRROR (R H ) 90 – 26
3F7 BELT, OPERATOR’S SEAT 90 – 40 3D17 CAB PANELS AND FLOOR MAT 90 – 2
3F8 BELT, SEAT – TRAINING SEAT 90 – 41 1F19 CAB POST INSTRUMENT PANEL 40 – 6
5E4 BELTS, AIR CONDITIONER COMPRESSOR 170 – 3 3E21 CAB POST INSTRUMENT PANEL 90 – 30
5E3 BELTS, AUGER 170 – 2 3D21 CAB REAR AND SIDE SEALS 90 – 6
5E6 BELTS, BEATER 170 – 5 3E7 CAB ROOF AND SUPPORTS 90 – 16
5E4 BELTS, CLEAN GRAIN ELEVATOR 170 – 3 1F21 CAB ROOF LIGHTS 40 – 8
5E3 BELTS, CONVEYOR FEEDER 170 – 2 3F11 CAB SEAT HEIGHT ADJUSTER 90 – 44
5E4 BELTS, COOLING FAN 170 – 3 3D19 CAB SOUND DEADENING, FOAM AND SEALS 90 – 4
5E4 BELTS, CYLINDER DRIVE 170 – 3 1F15 CAB WIRING HARNESS 40 – 2
5E4 BELTS, DRIVE, CYLINDER INTERMEDIATE 170 – 3 2B8 CABLE AND SWITCH, HYDROSTATIC DRIVE LEVE
5E5 BELTS, FAN, CLEANING 170 – 4 R 50 – 2
5E3 BELTS, FEEDER CONVEYOR 170 – 2 4C1 CABLE, CONCAVE INDICATOR, AND BRACKETS 120 – 20
5E5 BELTS, FEEDER HOUSE 170 – 4 2B10 CABLE, HYDROSTATIC DRIVE CONTROL 50 – 4
5E5 BELTS, HEADER AND REEL 170 – 4 1I13 CABLES, BATTERY 40 – 74
5E6 BELTS, LOWER TAILINGS AUGER 170 – 5 2C23 CAM LOBE MOTOR 50 – 44
5E4 BELTS, LOWER TAINLINGS AUGER 170 – 3 2D5 CAM, CARRIER AND PISTONS 50 – 52
CTS II COMBINE PC2752 (30-MAY-00) 10-11
PN=11
1A13
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2B19 CAM, SHIFTER, TRANSMISSION AND 5B23 CLEAN GRAIN LOADING AUGER, FOLD 130 – 18
DIFFERENTIAL 50 – 13 5B7 CLEAN GRAIN LOWER AUGER AND HINGED DOOR 130 – 2
1C20 CAMSHAFT 24 – 17 5B9 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR
1C6 CAMSHAFT BUSHING 24 – 2 CHAIN 130 – 4
1C20 CAMSHAFT BUSHING 24 – 17 5B11 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR
1C20 CAMSHAFT FOLLOWER 24 – 17 CHAIN 130 – 6
1C23 CAMSHAFT FOLLOWER 24 – 20 5C15 CLEAN OUT CHUTE, GRAIN TANK 130 – 36
1C20 CAMSHAFT GEAR 24 – 17 1F1 CLEANER, AIR AND INTAKE TUBES 30 – 8
2C4 CAP, BEARING, FINAL DRIVE 50 – 23 4D3 CLEANING FAN INTAKE SHIELDS 120 – 48
5C15 CAP, GRAIN TANK CLEAN OUT CHUTE 130 – 36 4C24 CLEANING FANS AND SHROUDS 120 – 44
1C6 CAPS, MAIN BEARING 24 – 2 4D1 CLEANING FANS AND SHROUDS 120 – 46
2D7 CAPS, YOKE AND PIVOTS 50 – 54 4G17 CLEANING SHOE AND CONVEYOR AUGER PIVOT
2D5 CARRIER, PISTONS AND CAM 50 – 52 ARM DRIVE TIGHTENER 121 – 52
2E4 CASE DRAIN HYDRAULIC LINES, FOUR WHEEL 1J13 CLEANING SHOE LAMP INSTALLATION 40 – 98
DRIVE 50 – 75 3I1 CLOSURE PLATES, FEEDER HOUSE – CONTOUR
1F19 CDC (COMBINE DATA CENTER) 40 – 6 MASTER 110 – 22
3E21 CDC (COMBINE DATA CENTER) 90 – 30 1E11 CLUTCH ASSEMBLY(STARTER) 24 – 58
1I21 CENTRAL ELECTRONICS MODULE AND CIRCUIT 4F17 CLUTCH, HEADER ELECTROMAGNETIC 121 – 28
BOARDS 40 – 82 3I16 CLUTCH, SLIP, FEEDER HOUSE 110 – 38
4J6 CHAFF SPREADER (DUAL MOTOR) HOSES AND 1F3 COLD WEATHER STARTING AID 30 – 10
LINES 125 – 30 2F9 COLUMN, STEERING (LOWER) 60 – 22
4I17 CHAFF SPREADER (DUAL MOTOR) PAN, WINGS 2F7 COLUMN, STEERING (UPPER) 60 – 20
AND SEALS 125 – 16 3G6 COLUMN, STEERING (UPPER) 90 – 64
4I15 CHAFF SPREADER (DUAL MOTOR) SHIELDS 1F19 COMBINE DATA CENTER 40 – 6
AND HANDLES 125 – 14 3E21 COMBINE DATA CENTER 90 – 30
4I21 CHAFF SPREADER CONTROL, CHECK VALVE, 3B15 COMPARTMENT, ENGINE 80 – 10
ROD AND KNOB 125 – 20 3B17 COMPARTMENT, ENGINE 80 – 12
4I13 CHAFF SPREADER DISC (DUAL MOTOR) 125 – 12 3B19 COMPARTMENT, ENGINE 80 – 14
4J2 CHAFF SPREADER LINES AND FITTINGS 125 – 26 3G21 COMPRESSOR HARDWARE KIT R134A 90 – 80
4J4 CHAFF SPREADER LINES, HOSES, VALVE AND 3G19 COMPRESSOR, A/C, HOSE 90 – 77
PUMP 125 – 28 5E4 COMPRESSOR, AIR CONDITIONING BELTS 170 – 3
2G20 CHAFF SPREADER MOTOR (EATON) 70 – 8 3G16 COMPRESSOR, AIR CONDITIONING SYSTEM
4I19 CHAFF SPREADER MOUNTING SUPPORT 125 – 18 R134A 90 – 74
4J8 CHAFF SPREADER PUMP 125 – 32 1I7 CONCAVE ADJUSTING MOTOR 40 – 68
4G15 CHAFFER DRIVE, CONVEYOR AUGERS AND SIEVE 121 – 50 4B16 CONCAVE ASSEMBLY AND BEATER GRATE,13-BAR
4D13 CHAFFER ELEMENT 120 – 58 NARROW 120 – 10
4D15 CHAFFER EXTENSION ELEMENT 120 – 60 4C1 CONCAVE INDICATOR, CABLE AND BRACKETS 120 – 20
4D17 CHAFFER FRAME 120 – 62 4C3 CONCAVE INDICATOR, CORN AND SMALL GRAIN 120 – 22
4D11 CHAFFER FRAME ARMS, PRECLEANER 120 – 56 4B14 CONCAVE, RASP BAR AND GRATE 120 – 8
4D7 CHAFFER FRAME, PRECLEANER 120 – 52 4B22 CONCAVE, SPIKE TOOTH 120 – 16
4D5 CHAFFER, PRECLEANING 120 – 50 4B20 CONCAVE, SPIKE-TOOTH 120 – 14
4J18 CHAIN TIGHTENER, LOWER TAILINGS AUGER 125 – 42 2J13 CONDENSER, A/C 70 – 74
3I10 CHAIN, IDLER SHAFT AND DRUM, FEEDER 1C13 CONNECTING RODS 24 – 10
CONVEYOR 110 – 32 1J7 CONNECTORS AND TERMINALS, SUPPLEMENTARY 40 – 92
4J16 CHAIN, SPROCKETS AND BEARINGS, TAILINGS 1E5 CONNECTORS, ELECTRICAL, WEATHERPACK 24 – 52
ELEVATOR CONVEYOR 125 – 40 1D24 CONNECTORS, FUEL INJECTION PUMP HOUSING 24 – 46
5D13 CHANNEL AND COVERS, CROSS AUGER 130 – 60 1J9 CONNECTORS, LOWER HARNESS, 6076 ENGINE
5C17 CHARGE HOUSING, VERTICAL UNLOADING ENGINE 40 – 94
AUGER 130 – 38 1J11 CONNECTORS, UPPER HARNESS, 6076 ENGINE 40 – 96
2J23 CHARGE PRESSURE HOSE 70 – 84 1I23 CONNECTORS, WEATHERPACK 40 – 84
4H3 CHARGE PUMP MOUNTING AND SHEAVE, REEL/ 1F17 CONSOLE PANEL, OVERHEAD 40 – 4
BELT PICKUP 121 – 62 3I1 CONTOUR MASTER – FEEDER HOUSE FRAME,
2C15 CHARGE PUMP, HYDROSTATIC DRIVE 50 – 35 TILT BEAM & CLOSURE PLATES 110 – 22
4I21 CHECK VALVE, ROD, KNOB AND CONTROL, 3J7 CONTOUR MASTER DRIVESHAFT 110 – 54
CHAFF SPREADER 125 – 20 2H19 CONTOUR MASTER HYDRAULIC HOSES, L H SIDE
5C15 CHUTE, GRAIN TANK CLEAN OUT 130 – 36 (OPTIONAL) 70 – 32
1F19 CIRCUIT BOARD, COMBINE DATA CENTER 40 – 6 3I5 CONTOUR MASTER LOCKOUT ADAPTER KIT (BELT
3E21 CIRCUIT BOARD, COMBINE DATA CENTER 90 – 30 PU & 4R CORN HEADS) 110 – 26
1I21 CIRCUIT BOARDS, CENTRAL ELECTRONICS MODU 2I18 CONTOUR MASTER SOLENOID CONTROL RELIEF
LE 40 – 82 VALVE 70 – 54
1I15 CIRCUIT BREAKER RELAYS 40 – 76 2J9 CONTOUR MASTER TILT CYLINDER 70 – 70
1I15 CIRCUIT BREAKERS, ENGINE COMPARTMENT 40 – 76 2J10 CONTOUR MASTER TILT CYLINDER HOSES AND
5C1 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND FITTINGS 70 – 71
IDLER 130 – 22 1H1 CONTOUR MASTER WIRING HARNESS 40 – 38
5B24 CLEAN GRAIN ELEVATOR GEARCASE AND 1H3 CONTOUR MASTER WIRING HARNESS ADAPTER 40 – 40
SHEAVE 130 – 20 3H23 CONTOUR MASTER, FEEDER HOUSE SHELL,
5B21 CLEAN GRAIN LOADING AUGER 130 – 16 WEAR PLATES AND SEALS 110 – 20
10-12 CTS II COMBINE PC2752 (30-MAY-00)
PN=12
1A14
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
3I3 CONTOUR MASTER, LOCKOUT ASSEMBLY 1C19 COVER, TIMING GEAR 24 – 16
(OPTIONAL) 110 – 24 5D13 COVERS AND CHANNEL, CROSS AUGER 130 – 60
2B10 CONTROL CABLE, HYDROSTATIC DRIVE 50 – 4 4E5 COVERS AND FRAME, MODULE 120 – 76
1G3 CONTROL PANEL, ARMREST 40 – 14 4E3 CRANK OUT SYSTEM, MODULE 120 – 74
1D22 CONTROL UNIT, ELECTRONIC 24 – 44 1B19 CRANKCASE OIL DRAIN, ENGINE 20 – 16
2D11 CONTROL VALVE 50 – 58 1C14 CRANKSHAFT 24 – 11
4J1 CONTROL VALVE ADJUSTING SCREW KIT, 1E9 CRANKSHAFT DAMPERS 24 – 56
REEL DRIVE FLOW 125 – 25 1C19 CRANKSHAFT FRONT OIL SEAL 24 – 16
2I22 CONTROL VALVE MODULE, SIX STACK SOLENOID 1C15 CRANKSHAFT KIT, UNDERSIZE
ASSEMBLY & MOUNTINGS 70 – 58 (CONNECTING ROD JOURNAL) 24 – 12
2D12 CONTROL VALVE SOLENOID 50 – 59 1E9 CRANKSHAFT PULLEY AND DAMPERS 24 – 56
4I23 CONTROL VALVE, FLOW, REEL DRIVE 125 – 22 5D9 CROSS AUGER BEARING PLATE, L H 130 – 56
2C17 CONTROL VALVE, HYDROSTATIC DRIVE, 5D13 CROSS AUGER COVERS AND CHANNEL 130 – 60
DISPLACEMENT 50 – 38 5D11 CROSS AUGERS, GRAIN TANK 130 – 58
4I25 CONTROL VALVE, REEL DRIVE FLOW, SEAL 3G5 CUP HOLDER 90 – 62
REPAIR KIT 125 – 24 4I9 CURTAIN, LOWER, STRAW SPREADER 125 – 8
2J20 CONTROL VALVE, SOLENOID, BRACKETS 70 – 81 4I7 CURTAIN, SPREADER, UPPER 125 – 6
2J19 CONTROL VALVE, SOLENOID, ENGINE GEARCASE 5C9 CURTAINS, GRAIN TANK 130 – 30
PRESSURE REGULATOR 70 – 80 2G23 CUTTING PLATFORM , 200 SERIES CONVERSION
2I19 CONTROL VALVE, SOLENOID, FOR AUGER SWING 70 – 55 PARTS 70 – 11
4I21 CONTROL, CHECK VALVE, ROD AND KNOB, 1C6 CYLINDER BLOCK FITTINGS 24 – 2
CHAFF SPREADER 125 – 20 4B7 CYLINDER COVER, THRESHING 120 – 1
1J19 CONVENIENCE OUTLET 40 – 104 4B10 CYLINDER DOOR 120 – 4
1J17 CONVENIENCE OUTLET, KIT 40 – 102 4G11 CYLINDER DRIVE ADJUSTING BRACKET,
2G23 CONVERSION PARTS, HUDRAULIC, 200 SERIES DUAL-RANGE 121 – 46
CUTTING PLATFORM 70 – 11 4G1 CYLINDER DRIVE GEARCASE, DUAL-RANGE 121 – 36
4G17 CONVEYOR AUGER AND CLEANING SHOE PIVOT 4G7 CYLINDER DRIVE INTERMEDIATE SHAFT
ARM DRIVE TIGHTENER 121 – 52 MOUNTING, DUAL-RANGE 121 – 42
5E3 CONVEYOR AUGER BELTS, 170 – 2 4G9 CYLINDER DRIVE INTERMEDIATE SHEAVE,
4G15 CONVEYOR AUGERS, SIEVE AND CHAFFER DRIVE 121 – 50 DUAL-RANGE 121 – 44
5B9 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN 4G5 CYLINDER DRIVE TIGHTENER, DUAL-RANGE 121 – 40
LOWER 130 – 4 4F23 CYLINDER DRIVE, SINGLE RANGE 121 – 34
5B11 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN 4F21 CYLINDER DRIVE, SLOW SPEED 121 – 32
LOWER 130 – 6 1C21 CYLINDER HEAD 24 – 18
3I10 CONVEYOR IDLER SHAFT, DRUM AND CHAIN, 1C21 CYLINDER HEAD BOLTS 24 – 18
FEEDER 110 – 32 1C21 CYLINDER HEAD GASKET 24 – 18
1B17 COOLANT HEATER, ENGINE BLOCK 20 – 14 1E7 CYLINDER HEAD GASKET KIT 24 – 54
1F9 COOLANT RECOVERY TANK 30 – 16 2F20 CYLINDER KIT, STEERING 60 – 33
1D5 COOLER, ENGINE OIL 24 – 27 1C13 CYLINDER LINERS 24 – 10
2J13 COOLER, OIL, 70 – 74 2I16 CYLINDER SPEED AND REEL LIFT, SOLENOID
2H1 COOLER, OIL, FEEDER HOUSE 70 – 14 CONTROL VALVE 70 – 52
2H3 COOLER, OIL, FEEDER HOUSE GEARCASE 70 – 16 2I12 CYLINDER SPEED HYDRAULIC LINES AND HOSES 70 – 48
5E4 COOLING FAN BELTS 170 – 3 2E23 CYLINDER, BRAKE SLAVE 60 – 12
4C3 CORN AND SMALL GRAIN CONCAVE INDICATOR 120 – 22 2E19 CYLINDER, BRAKE, MASTER 60 – 8
3D3 CORNER SHEET AND DOOR, FRONT, L H 80 – 48 2J5 CYLINDER, DRIVE, GRAIN TANK UNLOADING 70 – 66
3C24 CORNER SHEET, R H , FRONT 80 – 44 2H21 CYLINDER, HEADER LIFT, HYDRAULIC 70 – 34
3D1 CORNER SHEET, REAR, L H 80 – 46 2J3 CYLINDER, HYDRAULIC, UNLOADING AUGER
4G13 COUNTERSHAFT DRIVE, SECONDARY 121 – 48 SWING, LINES AND HOSES 70 – 64
5D14 COUNTERSHAFT DRIVE, UNLOADING AUGER 130 – 62 2F19 CYLINDER, STEERING 60 – 32
4F13 COUNTERSHAFT GEARCASE, PRIMARY 121 – 24 4B12 CYLINDER, THRESHING, RASP BAR 120 – 6
4F15 COUNTERSHAFT, PRIMARY, GEARCASE 121 – 26 4B18 CYLINDER, THRESHING, SPIKE TOOTH 120 – 12
1B16 COUPLING WITH HUB, ENGINE GEARCASE 20 – 12 2J9 CYLINDER, TILT – CONTOUR MASTER 70 – 70
4E16 COUPLING, GEARBOX AND SHAFT, MODULE 121 – 2 2J10 CYLINDER, TILT, HOSES AND FITTINGS –
4C17 COVER, BEATER 120 – 36 CONTOUR MASTER 70 – 71
3G20 COVER, COMPRESSOR A/C R134A 90 – 79 2J7 CYLINDER, UNLOADING AUGER SWING
3B15 COVER, ENGINE 80 – 10 HYDRAULIC 70 – 68
2C9 COVER, FRONT, HYDROSTATIC DRIVE PUMP 50 – 28 2E15 CYLINDERS, MASTER BRAKE AND BRAKE PEDALS 60 – 4
1E15 COVER, FUEL INJECTION PUMP ACCESS 24 – 62
2B19 COVER, HOUSING, TRANSMISSION AND
DIFFERENTIAL 50 – 13 D
2C11 COVER, HYDROSTATIC DRIVE PUMP 50 – 30
2D1 COVER, INNER 50 – 48 1C14 DAMPER KEY 24 – 11
1D5 COVER, OIL COOLER 24 – 27 1E9 DAMPERS, CRANKSHAFT 24 – 56
2D4 COVER, QUILL AND BEARING 50 – 51 1F19 DATA CENTER, COMBINE 40 – 6
1C24 COVER, ROCKER ARM 24 – 21 3E21 DATA CENTER, COMBINE 90 – 30
1D12 COVER, THERMOSTAT 24 – 34 5G5 DECALS, FRONT 170 – 52
4B7 COVER, THRESHING CYLINDER 120 – 1 5G7 DECALS, FRONT 170 – 54
CTS II COMBINE PC2752 (30-MAY-00) 10-13
PN=13
1A15
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
5G10 DECALS, FRONT 170 – 58 4C11 DRIVE BELT, BEATER, IDLER 120 – 30
5G9 DECALS, FRONT WHEEL 170 – 56 4J17 DRIVE BRACKET, TAILINGS AND LOWER
5G5 DECALS, REAR 170 – 52 TROUGH SUPPORT 125 – 41
5G7 DECALS, REAR 170 – 54 4J23 DRIVE CHAIN TIGHTENER, UPPER TAILINGS 125 – 48
5G10 DECALS, REAR 170 – 58 2B10 DRIVE CONTROL CABLE, HYDROSTATIC 50 – 4
5G9 DECALS, REAR WHEEL 170 – 56 2C17 DRIVE DISPLACEMENT CONTROL VALVE
5E7 DECALS, SAFETY AND LOCATIONS 170 – 6 HYDROSTATIC 50 – 38
5E9 DECALS, SAFETY AND LOCATIONS 170 – 8 1C14 DRIVE GEAR, OIL PUMP 24 – 11
5E11 DECALS, SAFETY AND LOCATIONS 170 – 10 4E20 DRIVE GEARCASE, MODULE, L H 121 – 6
5E13 DECALS, SAFETY AND LOCATIONS 170 – 12 4E18 DRIVE GEARCASE, MODULE, R H 121 – 4
5E15 DECALS, SAFETY AND LOCATIONS 170 – 14 4C5 DRIVE IDLER, STRIPPER BEATER 120 – 24
5E17 DECALS, SAFETY AND LOCATIONS 170 – 16 2B8 DRIVE LEVER, CABLE AND SWITCH HYDROSTATI
5E19 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 18 C 50 – 2
5E21 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 20 2C21 DRIVE MOTOR KIT, HYDROSTATIC 50 – 42
5E23 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 22 2C19 DRIVE MOTOR, HYDROSTATIC 50 – 40
5F1 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 24 2E5 DRIVE MOTOR, HYDROSTATIC 50 – 76
5F3 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 26 2C14 DRIVE PISTON ASSEMBLY, HYDROSTATIC 50 – 34
5F5 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 28 2C9 DRIVE PUMP, HYDROSTATIC 50 – 28
5F9 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 32 2C12 DRIVE PUMP, HYDROSTATIC 50 – 32
5F11 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 34 2J1 DRIVE PUMP, REEL/BELT PICKUP 70 – 62
5F13 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 36 2C6 DRIVE SHAFT SHIELDS, FINAL 50 – 25
5F15 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 38 4F11 DRIVE SHAFT, GEARCASE MOUNTING AND
5F17 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 40 PRIMARY COUNTERSHAFT 121 – 22
5F19 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 42 3C19 DRIVE SHIELD, R H REAR 80 – 38
5F21 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 44 3C15 DRIVE SHIELDS, AUGER (R-H SIDE) 80 – 34
5F23 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 46 3H19 DRIVE SHIELDS, CONTOUR MASTER FEEDER
5G1 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 48 HOUSE 110 – 16
5G3 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 50 3H17 DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE 110 – 14
5G13 DECALS, SEPARATOR MODULE SAFETY 170 – 61 3C11 DRIVE SIDE SHIELDS, SEPARATOR 80 – 30
5G12 DECALS, TOP 170 – 60 5C1 DRIVE TIGHTENER AND IDLER, CLEAN GRAIN
4H7 DECK, SUPPORTS AND FINS, STRAW CHOPPER 121 – 66 ELEVATOR 130 – 22
1H14 DEFLECTOR – LESS HARVESTRAK 40 – 51 4H1 DRIVE TIGHTENER, FEEDER HOUSE 121 – 60
3B19 DEFLECTOR, ENGINE COMPARTMENT 80 – 14 3H15 DRIVE TIGHTENER, FIXED SPEED FEEDER
5D24 DIAL-A-MATIC ELECTRICAL HARNESS 160 – 4 HOUSE 110 – 12
5D22 DIAL-A-MATIC HEADER HEIGHT CONTROL 4J19 DRIVE TIGHTENER, LOWER TAILINGS AUGER 125 – 44
HYDRAULIC LINE AND VALVE BLOCK 160 – 2 4G17 DRIVE TIGHTENER, PIVOT ARM, CLEANING
5D23 DIAL-A-MATIC HEADER HEIGHT CONTROL SHOE AND CONVEYOR AUGER 121 – 52
VALVE BLOCK SOLENOID 160 – 3 3H13 DRIVE TIGHTENER, VARIABLE SPEED 110 – 10
2H22 DIAL-A-MATIC HEADER HEIGHT CONTROL, 2B12 DRIVE WHEELS 50 – 6
VALVE BLOCK SOLENOID 70 – 35 2B13 DRIVE WHEELS, HIGH FLOATATION
2B17 DIFFERENTIAL AND TRANSMISSION HOUSING 50 – 11 PLANETARY FINAL DRIVE 50 – 7
2C1 DIFFERENTIAL GEARS 50 – 20 5D14 DRIVE, COUNTERSHAFT, UNLOADING AUGER 130 – 62
2C1 DIFFERENTIAL SHAFTS 50 – 20 5E4 DRIVE, CYLINDER INTERMEDIATE, BELTS 170 – 3
1D15 DIPSTICK, ENGINE OIL 24 – 37 5E4 DRIVE, CYLINDER, BELTS 170 – 3
4I13 DISC, CHAFF SPREADER (DUAL MOTOR) 125 – 12 1B12 DRIVE, ENGINE 20 – 8
2C17 DISPLACEMENT CONTROL VALVE, HYDROSTATIC 4G19 DRIVE, FAN, SEPARATOR 121 – 54
DRIVE 50 – 38 4G23 DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE 121 – 58
1F14 DOME LIGHT, CAB 40 – 1 2C3 DRIVE, FINAL 50 – 22
3E3 DOOR AND GLASS, CAB 90 – 12 2D17 DRIVE, HYDROSTATIC, LOWER OIL LINES
3D3 DOOR AND SHEET, L H FRONT CORNER 80 – 48 (FOUR WHEEL DRIVE) 50 – 64
3E1 DOOR LATCH, CAB 90 – 10 2D15 DRIVE, HYDROSTATIC, LOWER OIL LINES
4B10 DOOR, CYLINDER 120 – 4 (TWO WHEEL DRIVE) 50 – 62
3B11 DOOR, ENGINE ACCESS, HANDRAILS, 2G18 DRIVE, REEL, FLOW CONTROL VALVE 70 – 6
RADIATOR 80 – 6 1B6 DRIVE, ROTARY SCREEN 20 – 2
5B7 DOOR, HINGED, CLEAN GRAIN LOWER AUGER 130 – 2 4G13 DRIVE, SECONDARY COUNTERSHAFT 121 – 48
4H23 DOOR, LOWER, STRAW CHOPPER 121 – 82 1B10 DRIVES, ENGINE FAN 20 – 6
3C9 DOOR, REAR HOOD 80 – 28 4E22 DRIVES, ENGINE GEARBOX TO MODULE 121 – 8
3C7 DOOR, REAR HOOD ACCESS AND STOP 80 – 26 4E24 DRIVES, ENGINE GEARBOX TO MODULE 121 – 10
1B8 DOOR, ROTARY SCREEN 20 – 4 4H5 DRIVES, STRAW CHOPPER 121 – 64
4B8 DOOR, SEAL AND STONE TRAP, SEPARATOR/ 4I5 DRIVES, STRAW SPREADER 125 – 4
FEEDER HOUSE 120 – 2 3J7 DRIVESHAFT, CONTOUR MASTER 110 – 54
4I11 DOOR, STRAW SPREADER 125 – 10 2E21 DRUM, BRAKE 60 – 10
4H21 DOOR, UPPER REAR, STRAW CHOPPER 121 – 80 3I10 DRUM, CHAIN AND IDLER SHAFT, FEEDER
1D12 DRAIN VALVE, CYLINDER HEAD 24 – 34 CONVEYOR 110 – 32
1D8 DRAIN VALVE, OIL PAN 24 – 30 1I1 DUAL LEVEL MONITOR HARNESS, GRAIN TANK 40 – 62
1B19 DRAIN, ENGINE CRANKCASE OIL 20 – 16 4C13 DUAL SPEED BEATER DRIVE CONVERSION,
4C9 DRIVE BELT AND BEATER SHAFT 120 – 28 700/400 RPM 120 – 32
10-14 CTS II COMBINE PC2752 (30-MAY-00)
PN=14
1A16
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2B14 DUAL WHEELS, WIDE-SPACED 4F5 ENGINE GEARCASE- SEPARATOR DRIVE WET-
(PLANETARY FINAL DRIVE) 50 – 8 CLUTCH AND PUMP DRIVE SHAFT 121 – 16
4G11 DUAL-RANGE CYLINDER DRIVE ADJUSTING 4F7 ENGINE GEARCASE, SEPARATOR AND PUMP
BRACKET 121 – 46 DRIVE 121 – 18
4G1 DUAL-RANGE CYLINDER DRIVE GEARCASE 121 – 36 4F9 ENGINE GEARCASE, SEPARATOR AND PUMP
4G7 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE DRIVE 121 – 20
SHAFT MOUNTING 121 – 42 4F3 ENGINE GEARCASE, STRAW CHOPPER, UNLOAD-
4G9 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE ING DRIVE AND SEPARATOR DRIVE GEAR 121 – 14
SHEAVE 121 – 44 4F1 ENGINE GEARCASE, UNLOADING AND SEPARATOR
4G5 DUAL-RANGE CYLINDER DRIVE TIGHTENER 121 – 40 DRIVE GEAR 121 – 12
4G3 DUAL-RANGE LOCKOUT ARM 121 – 38 1B14 ENGINE INTERCOOLER 20 – 10
3E20 DUCTS, HEATER AND AIR CONDITIONING 90 – 29 1B13 ENGINE MOUNTS AND REAR SUPPORT 20 – 9
3J1 DUST FAN BELT, LH FEEDER HOUSE 110 – 48 1C5 ENGINE OIL (TORQ-GARD PLUS-50) 24 – 1
3I24 DUST FAN, LH SIDE FEEDER HOUSE 110 – 46 1D5 ENGINE OIL COOLER 24 – 27
2H1 DUST SUPPRESSSION, LUBE OIL PUMP 70 – 14 1D15 ENGINE OIL DIPSTICK 24 – 37
1D15 ENGINE OIL DIPSTICK TUBE 24 – 37
1D6 ENGINE OIL FILTER 24 – 28
E 1D2 ENGINE OIL PUMP 24 – 24
1D1 ENGINE OIL PUMP INTAKE 24 – 23
1D22 E C U 24 – 44 1C11 ENGINE OVERHAUL KIT 24 – 8
1I17 ECU MOUNTING SUPPORT 1H19 ENGINE PLUGGED AIR FILTER WARNING SWITCH 40 – 56
(SN -XXXXXX) 40 – 78 3B15 ENGINE RAILS 80 – 10
1E21 ELECTRIC FUEL PUMP, WATER SEPARATOR AND 1E7 ENGINE REBUILD GASKET KIT 24 – 54
FUEL FLOAT 30 – 4 1C8 ENGINE SERVICE PARTS, KEY 24 – 4
1J1 ELECTRICAL CONNECTOR SERVICE KIT 40 – 86 1E14 ENGINE SPEED SENSOR 24 – 61
1J3 ELECTRICAL CONNECTOR SERVICE KIT 40 – 88 1F19 ENGINE TEMPERATURE GAUGE 40 – 6
5D24 ELECTRICAL HARNESS, DIAL-A-MATIC 160 – 4 3E21 ENGINE TEMPERATURE GAUGE 90 – 30
1J8 ELECTRICAL SERVICE OUTLET 40 – 93 1F3 ETHER STARTING AID 30 – 10
1E5 ELECTRICAL TERMINALS AND CONNECTORS, 1D19 ETHER STARTING FITTINGS 24 – 41
WEATHERPACK 24 – 52 1D18 EXHAUST MANIFOLD GASKETS 24 – 40
4F17 ELECTROMAGNETIC HEADER CLUTCH 121 – 28 1D18 EXHAUST MANIFOLD HEAT SHIELD 24 – 40
1D22 ELECTRONIC CONTROL UNIT 24 – 44 1D18 EXHAUST MANIFOLDS 24 – 40
1I19 ELECTRONIC CONTROL UNIT MOUNTING SUPPORT 40 – 80 1F5 EXHAUST PIPES AND MUFFLER 30 – 12
1D22 ELECTRONIC FUEL INJECTION PUMP 24 – 44 1C21 EXHAUST VALVE SHIELD 24 – 18
1I21 ELECTRONICS MODULE AND CIRCUIT BOARD, 1C21 EXHAUST VALVES 24 – 18
CENTRAL 40 – 82 4D15 EXTENSION ELEMENT, CHAFFER 120 – 60
4D13 ELEMENT, CHAFFER 120 – 58 5C11 EXTENSIONS, GRAIN TANK 130 – 32
4D15 ELEMENT, CHAFFER EXTENSION 120 – 60
4D19 ELEMENT, SIEVE 120 – 64
5B9 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN F
LOWER 130 – 4
5B11 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN 1I4 FAN DRIVE ADJUSTING MOTOR, SEPARATOR 40 – 65
LOWER 130 – 6 3C17 FAN DRIVE AND MUD SHIELDS (L H SIDE) 80 – 36
5B15 ELEVATOR SHAFT, SPROCKET AND SHEAVE, 4G21 FAN DRIVE SPEED CONTROL LINKAGE 121 – 56
UPPER CLEAN GRAIN 130 – 10 4G23 FAN DRIVE SPEED CONTROL SHEAVE LINKAGE 121 – 58
5C3 ELEVATOR SHIELDS, UPPER CLEAN GRAIN 130 – 24 1E2 FAN DRIVE, FIXED 24 – 49
5E4 ELEVATOR, CLEAN GRAIN BELTS 170 – 3 4G19 FAN DRIVE, SEPARATOR 121 – 54
4J14 ELEVATOR, TAILINGS, HOUSING 125 – 38 1E2 FAN PULLEY HUB 24 – 49
5B13 ELEVATOR, UPPER CLEAN GRAIN 130 – 8 1E13 FAN PULLEY, AIR CONDITIONER COMPRESSOR 24 – 60
3B11 ENGINE ACCESS DOOR, HANDRAILS, AND 5E5 FAN, CLEANING, BELTS 170 – 4
RADIATOR DOOR 80 – 6 3I24 FAN, DUST, LH SIDE FEEDER HOUSE 110 – 46
3B21 ENGINE ACCESS PLATFORM AND STEP 80 – 16 1B10 FAN, ENGINE AND DRIVES 20 – 6
1B17 ENGINE BLOCK COOLANT HEATER 20 – 14 3G12 FAN, PRESSURIZER AND AIR CONDITIONING/
1I15 ENGINE CIRCUIT BREAKERS 40 – 76 HEATER 90 – 70
3B15 ENGINE COMPARTMENT 80 – 10 4C24 FANS AND SHROUDS, CLEANING 120 – 44
3B17 ENGINE COMPARTMENT 80 – 12 4D1 FANS AND SHROUDS, CLEANING 120 – 46
3B19 ENGINE COMPARTMENT 80 – 14 3I14 FEED PLATE LATCH HANDLE 110 – 36
1B19 ENGINE CRANKCASE OIL DRAIN 20 – 16 5E3 FEEDER CONVEYOR BELTS 170 – 2
1B12 ENGINE DRIVE 20 – 8 3I12 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER
1B10 ENGINE FAN AND DRIVES 20 – 6 AND GUIDES 110 – 34
4E22 ENGINE GEARBOX TO MODULE DRIVES 121 – 8 3I10 FEEDER CONVEYOR IDLER SHAFT, DRUM AND
4E24 ENGINE GEARBOX TO MODULE DRIVES 121 – 10 CHAIN 110 – 32
1B16 ENGINE GEARCASE COUPLING WITH HUB 20 – 12 1J15 FEEDER HOUSE BACKSHAFT SPEED SENSOR 40 – 100
2J15 ENGINE GEARCASE OIL FILTER ASSEMBLY 70 – 76 5E5 FEEDER HOUSE BELTS 170 – 4
2J17 ENGINE GEARCASE PRESSURE REGULATOR 70 – 78 3H19 FEEDER HOUSE DRIVE SHIELDS – CONTOUR
2J19 ENGINE GEARCASE PRESSURE REGULATOR, MASTER 110 – 16
SOLENOID CONTROL VALVE 70 – 80
CTS II COMBINE PC2752 (30-MAY-00) 10-15
PN=15
1A17
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
3H17 FEEDER HOUSE DRIVE SHIELDS AND SAFETY 2G3 FIXED REAR AXLE, 4-WHEEL DRIVE, STEERING
STOP 110 – 14 TIE RODS – GRAIN 60 – 42
4H1 FEEDER HOUSE DRIVE TIGHTENER 121 – 60 3H15 FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER 110 – 12
3H15 FEEDER HOUSE DRIVE TIGHTENER (FIXED 2J21 FLAT O-RING KIT, HYDRAULIC 70 – 82
SPEED) 110 – 12 1E21 FLOAT, FUEL 30 – 4
3J1 FEEDER HOUSE DUST FAN BELT, LH 110 – 48 3D17 FLOOR MAT AND PANELS, CAB 90 – 2
3I24 FEEDER HOUSE DUST FAN, LH SIDE 110 – 46 3I8 FLOOR, FEEDER HOUSE 110 – 30
3I8 FEEDER HOUSE FLOOR 110 – 30 2E1 FLOW CONTROL VALVE TO CAM LOBE MOTORS,
3H21 FEEDER HOUSE FRAME 110 – 18 LINES AND HOSES 50 – 72
3I1 FEEDER HOUSE FRAME, TILT BEAM & CLOSURE 2G18 FLOW CONTROL VALVE, REEL DRIVE 70 – 6
PLATES, CONTOUR MASTER 110 – 22 4I23 FLOW CONTROL VALVE, REEL DRIVE 125 – 22
3J5 FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE 1C18 FLYWHEEL 24 – 15
AND MOUNTINGS (FIXED SPEED WITH 110 – 52 1C18 FLYWHEEL HUB 24 – 15
2H3 FEEDER HOUSE GEARCASE OIL COOLER 70 – 16 3D19 FOAM, SEALS, SOUND DEADENING, CAB 90 – 4
2H5 FEEDER HOUSE OIL COOLER GEARBOX FITTINGS 1C20 FOLLOWER, CAMSHAFT 24 – 17
AND HOSES 70 – 18 1C23 FOLLOWER, CAMSHAFT 24 – 20
2G24 FEEDER HOUSE OIL COOLER LUBE OIL PUMP 70 – 12 3H9 FOOT CONTROL, FEEDER HOUSE REVERSER 110 – 6
2H1 FEEDER HOUSE OIL COOLER, LUBE OIL PUMP 70 – 14 3F1 FOOT CONTROL, REVERSER, FEEDER HOUSE 90 – 34
3I20 FEEDER HOUSE RETURN FLOOR 110 – 42 3F9 FORE-AND-AFT, SEAT ADJUST 90 – 42
3F1 FEEDER HOUSE REVERSER FOOT CONTROL 90 – 34 2B17 FORKS, SHIFTER 50 – 11
3H9 FEEDER HOUSE REVERSER FOOT CONTROL 110 – 6 2E4 FOUR WHEEL DRIVE CASE DRAIN HYDRAULIC
3H23 FEEDER HOUSE SHELL – CONTOUR MASTER 110 – 20 LINES 50 – 75
3I16 FEEDER HOUSE SLIP CLUTCH 110 – 38 2D23 FOUR WHEEL DRIVE HYDRAULIC LINES AND HOS
3I6 FEEDER HOUSE UPPER SHAFT 110 – 28 ES, L H 50 – 70
2G22 FEEDER HOUSE VARIABLE DRIVE HYDRAULIC 2E1 FOUR WHEEL DRIVE LINES AND HOSES 50 – 72
HOSE 70 – 10 4E5 FRAME AND COVERS, MODULE 120 – 76
3H23 FEEDER HOUSE WEAR PLATES – CONTOUR 3E5 FRAME AND SUPPORT, CAB 90 – 14
MASTER 110 – 20 4D11 FRAME ARMS, PRECLEANER CHAFFER 120 – 56
3I18 FEEDER HOUSE, UPPER COUNTERSHAFT 4D17 FRAME, CHAFFER 120 – 62
VARIABLE DRIVE 110 – 40 3H21 FRAME, FEEDER HOUSE 110 – 18
1F17 FIELD LIGHT SWITCH, AUX, OPTIONAL 40 – 4 3I1 FRAME, FEEDER HOUSE, CONTOUR MASTER 110 – 22
1F23 FIELD LIGHTING, AUXILIARY 40 – 10 3B9 FRAME, SEPARATOR 80 – 4
1J23 FIELD LIGHTS 40 – 108 4D21 FRAME, SIEVE 120 – 66
4E9 FILLER PLATE, MODULE GRATE ASSEMBLY 4I9 FRAME, STRAW SPREADER 125 – 8
AND FINGER BAR 120 – 80 1F22 FRONT AND REAR TURN AND TAIL LIGHTS 40 – 9
2H23 FILTER ASSEMBLY, MAIN, HYDRAULIC 70 – 36 2B15 FRONT AXLE 50 – 9
1F1 FILTER, AIR AND INTAKE TUBES 30 – 8 3D3 FRONT CORNER SHEET AND DOOR, L H 80 – 48
1D6 FILTER, ENGINE OIL 24 – 28 3C24 FRONT CORNER SHEET, R H 80 – 44
1E3 FILTER, FUEL 24 – 50 1C19 FRONT OIL SEAL 24 – 16
2J15 FILTER, OIL, ENGINE GEARCASE, ASSEMBLY 70 – 76 3H11 FRONT SHAFT WITH REVERSER (VARIABLE)
1C19 FILTER, WATER PUMP (WEEP HOLE) 24 – 16 9400, 9500 COMBINES 110 – 8
3G10 FILTERS, AIR CONDITIONING AND HEATER 3D7 FRONT SHIELD ASSEMBLY, LEFT SIDE 80 – 52
HOUSING 90 – 68 3D9 FRONT SHIELD ASSEMBLY, RIGHT SIDE 80 – 54
2C3 FINAL DRIVE 50 – 22 2F3 FRONT STEERING HOSES AND LINES 60 – 16
2C5 FINAL DRIVE AXLE, GEAR AND BEARINGS 50 – 24 3H5 FRONT VARIABLE DRIVE SHEAVE AND
2C4 FINAL DRIVE HOUSING AND BEARING CAP 50 – 23 MOUNTINGS 110 – 2
2C7 FINAL DRIVE PINION, SHAFTS AND BEARINGS 50 – 26 1D12 FRONT WATER MANIFOLD 24 – 34
2C6 FINAL DRIVE SHAFT SHIELDS 50 – 25 5G9 FRONT WHEEL DECALS 170 – 56
4H13 FINE CUT ROTOR STRAW CHOPPER (PADDLED 1E3 FUEL CHECK VALVE 24 – 50
NARROW (670401- ) 121 – 72 1E3 FUEL FILTER 24 – 50
4H11 FINE CUT ROTOR STRAW CHOPPER (STRAIGHT 1E3 FUEL FILTER BASE 24 – 50
NARROW (670401- ) 121 – 70 1E3 FUEL FILTER LINES 24 – 50
4E9 FINGER BAR, FILLER PLATE AND MODULE 1E21 FUEL FLOAT 30 – 4
GRATE ASSEMBLY 120 – 80 1F19 FUEL GAUGE 40 – 6
4H7 FINS, SUPPORTS AND DECK, STRAW CHOPPER 121 – 66 3E21 FUEL GAUGE 90 – 30
2H5 FITTINGS AND HOSES, OIL COOLER, GEARBOX, 1E1 FUEL INJECTION NOZZLE 24 – 48
FEEDER HOUSE 70 – 18 1D20 FUEL INJECTION NOZZLES 24 – 42
4J2 FITTINGS AND LINES, CHAFF SPREADER 125 – 26 1D22 FUEL INJECTION PUMP 24 – 44
1C6 FITTINGS, CYLINDER BLOCK 24 – 2 1E15 FUEL INJECTION PUMP ACCESS COVER 24 – 62
1D19 FITTINGS, ETHER STARTING 24 – 41 1D24 FUEL INJECTION PUMP HOUSING CONNECTORS 24 – 46
1E19 FITTINGS, FUEL TANK 30 – 2 1D22 FUEL LEAK-OFF LINES 24 – 44
1E23 FITTINGS, TANK FUEL LINES 30 – 6 1D20 FUEL LINES 24 – 42
2J10 FITTINGS, TILT CYLINDER – CONTOUR MASTER 70 – 71 1D22 FUEL SHUT-OFF SOLENOID (FIP) 24 – 44
1E2 FIXED FAN DRIVE 24 – 49 1E19 FUEL TANK, SUPPORTS, AND FITTINGS 30 – 2
2F22 FIXED REAR AXLE (GRAIN) 60 – 35 1D25 FUEL TRANSFER PUMP (ROBERT BOSCH) 24 – 47
2G7 FIXED REAR AXLE STEERING TIE RODS
GRAIN 60 – 46
10-16 CTS II COMBINE PC2752 (30-MAY-00)
PN=16
1A18
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
G 5D17 GRAIN TANK SAMPLING TROUGH 130 – 66
5C5 GRAIN TANK TOP 130 – 26
1C24 GASKET ADHESIVE, ROCKER ARM COVER 24 – 21 2J5 GRAIN TANK UNLOADING DRIVE CYLINDER 70 – 66
1E7 GASKET KIT, CYLINDER HEAD 24 – 54 2J5 GRAIN TANK UNLOADING DRIVE CYLINDER
1E7 GASKET KIT, ENGINE REBUILD 24 – 54 MOUNTING 70 – 66
1E7 GASKET KIT, SHORT BLOCK 24 – 54 1H23 GRAIN TANK WIRING HARNESS, LIGHT, LIMIT
1C21 GASKET, CYLINDER HEAD 24 – 18 SWITCH AND LEVEL MONITOR 40 – 60
1D14 GASKET, INTAKE MANIFOLD 24 – 36 4B14 GRATE AND RASP BAR CONCAVE 120 – 8
1D6 GASKET, OIL FILTER HOUSING 24 – 28 5D16 GUIDE, DRIVE BELT, UNLOADING AUGER 130 – 64
1D8 GASKET, OIL PAN 24 – 30 3I12 GUIDES, TIGHTENER AND FEEDER CONVEYOR
1D2 GASKET, OIL PUMP 24 – 24 DRIVE CHAIN 110 – 34
1D1 GASKET, OIL PUMP INTAKE 24 – 23
1C17 GASKET, REAR OIL SEAL 24 – 14
1C24 GASKET, ROCKER ARM COVER 24 – 21 H
1D12 GASKET, THERMOSTAT 24 – 34
1C19 GASKET, TIMING GEAR COVER 24 – 16 4C19 HANDLE, LATCHES, SHOE GRAIN SUPPLY AUGER
1D16 GASKET, TURBOCHARGER 24 – 38 CLEANOUT DOOR 120 – 38
1D12 GASKET, WATER MANIFOLD 24 – 34 4I15 HANDLES AND SHIELDS, CHAFF SPREADER
1D10 GASKET, WATER PUMP 24 – 32 (DUAL MOTOR) 125 – 14
1D18 GASKETS, EXHAUST MANIFOLD 24 – 40 3E9 HANDRAIL AND LADDER, OPERATOR’S PLATFORM 90 – 18
2G14 GAUGE, ACCUMULATOR PRESSURE 70 – 2 3B11 HANDRAILS, RADIATOR DOOR, ENGINE
1F19 GAUGE, ENGINE TEMPERATURE 40 – 6 ACCESS DOOR 80 – 6
3E21 GAUGE, ENGINE TEMPERATURE 90 – 30 3H1 HARDWARE KIT, CAB 90 – 84
3H7 GEAR BOX, REVERSER 110 – 4 3G21 HARDWARE KIT, COMPRESSOR R134A 90 – 80
5C15 GEAR CASE, VERTICAL AUGER LOWER 130 – 36 2E7 HARDWARE, HYDRAULIC PUMP CONNECTING 50 – 78
1C20 GEAR, CAMSHAFT 24 – 17 1J9 HARNESS CONNECTORS, LOWER, 6076 ENGINE 40 – 94
2C5 GEAR, FINAL DRIVE 50 – 24 1J11 HARNESS CONNECTORS, UPPER, 6076 ENGINE 40 – 96
1D22 GEAR, INJECTION PUMP 24 – 44 1H1 HARNESS WIRING, MAIN, L H CENTER 40 – 38
1C14 GEAR, OIL PUMP DRIVE 24 – 11 1G1 HARNESS, ARMREST WIRING 40 – 12
1D2 GEAR, OIL PUMP DRIVE 24 – 24 1F15 HARNESS, CAB WIRING 40 – 2
1C18 GEAR, STARTER 24 – 15 1I1 HARNESS, GRAIN TANK DUAL LEVEL MONITOR 40 – 62
2H5 GEARBOX FITTINGS AND HOSES, OIL COOLER, 1H17 HARNESS, LOWER, ENGINE, 6076 40 – 54
FEEDER HOUSE 70 – 18 1E11 HARNESS, STARTER, WIRING 24 – 58
4E22 GEARBOX, ENGINE TO MODULE DRIVES 121 – 8 1H15 HARNESS, UPPER, ENGINE, 6076 40 – 52
4E24 GEARBOX, ENGINE TO MODULE DRIVES 121 – 10 1G7 HARNESS, WIRING, A/C, HEATER AND AIRSEAT 40 – 18
4E16 GEARBOX, SHAFT AND COUPLING, MODULE 121 – 2 1H3 HARNESS, WIRING, MAIN, L H CENTER 40 – 40
4C15 GEARCASE AND SHEAVE, BEATER 120 – 34 1H7 HARNESS, WIRING, R H MAIN 40 – 44
5B24 GEARCASE AND SHEAVE, CLEAN GRAIN 1G5 HARNESS, WIRING, STEERING COLUMN 40 – 16
ELEVATOR 130 – 20 1F19 HARVESTRAK 40 – 6
1B16 GEARCASE COUPLING, ENGINE 20 – 12 3E21 HARVESTRAK 90 – 30
4F11 GEARCASE MOUNTING, PRIMARY COUNTERSHAFT 1H11 HARVESTRAK MONITOR SYSTEM 40 – 48
AND DRIVE SHAFT 121 – 22 1H11 HARVESTRAK WIRING HARNESS 40 – 48
4G1 GEARCASE, DUAL-RANGE CYLINDER DRIVE 121 – 36 1C21 HEAD BOLT KIT 24 – 18
4F5 GEARCASE, ENGINE 121 – 16 1C21 HEAD, CYLINDER 24 – 18
4F9 GEARCASE, ENGINE 121 – 20 5E5 HEADER BELTS 170 – 4
5C25 GEARCASE, HORIZONTAL UNLOADING AUGER 4F17 HEADER ELECTROMAGNETIC CLUTCH 121 – 28
DRIVE 130 – 46 2H22 HEADER HEIGHT CONTROL VALVE 70 – 35
2E7 GEARCASE, HYDROSTATIC DRIVE PUMP,MAIN 5D23 HEADER HEIGHT CONTROL VALVE 160 – 3
HYDRAULIC PUMP CONNECTING HARDWARE 50 – 78 5D22 HEADER HEIGHT CONTROL, DIAL-A-MATIC
4E20 GEARCASE, MODULE DRIVE, L,H 121 – 6 HYDRAULIC LINE AND VALVE BLOCK 160 – 2
4E18 GEARCASE, MODULE DRIVE, R H 121 – 4 5D24 HEADER HEIGHT CONTROL, ELECTRIC
4F13 GEARCASE, PRIMARY COUNTERSHAFT 121 – 24 HARNESS, DIAL-A-MATIC 160 – 4
4F15 GEARCASE, PRIMARY COUNTERSHAFT 121 – 26 2H21 HEADER LIFT CYLINDER, HYDRAULIC 70 – 34
2C1 GEARS, DIFFERENTIAL 50 – 20 2H17 HEADER LIFT HYDRAULIC LINES AND HOSES 70 – 30
2B22 GEARS, TRANSMISSION INPUT SHAFT 50 – 16 2I14 HEADER LIFT MODULE, SOLENOID CONTROL
2B24 GEARS, TRANSMISSIONPINION SHAFT 50 – 18 VALVE 70 – 50
2B20 GEARSHIFT LEVER AND LINKAGE 50 – 14 1A9 HEADERS 10 – 8
3E23 GEARSHIFT LEVER AND LINKAGE 90 – 32 1D18 HEAT SHIELD, EXHAUST MANIFOLD 24 – 40
3E3 GLASS AND DOOR, CAB 90 – 12 1G9 HEATER AND AIR CONDITIONER SWITCH 40 – 20
3F23 GLOVE BOX, ARMREST (R H ) 90 – 56 3E20 HEATER AND AIR CONDITIONING DUCTS 90 – 29
4D9 GRAIN LEAK KIT 120 – 54 3G10 HEATER HOUSING AND AIR CONDITIONING
5C9 GRAIN TANK AND CURTAINS 130 – 30 FILTERS 90 – 68
5C7 GRAIN TANK BASE 130 – 28 3G23 HEATER SYSTEM 90 – 82
5D11 GRAIN TANK CROSS AUGERS 130 – 58 1G7 HEATER WIRING HARNESS 40 – 18
1I1 GRAIN TANK DUAL LEVEL MONITOR HARNESS 40 – 62 1B17 HEATER, COOLANT, ENGINE BLOCK 20 – 14
5C11 GRAIN TANK EXTENSIONS 130 – 32 3F11 HEIGHT ADJUSTER, CAB SEAT 90 – 44
5C13 GRAIN TANK EXTENSIONS SUPPORT AND ANGLES 130 – 34
CTS II COMBINE PC2752 (30-MAY-00) 10-17
PN=17
1A19
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2B13 HIGH FLOATATION DRIVE WHEELS 4H17 HOUSING AND KNIFEBANK, STRAW CHOPPER 121 – 76
PLANETARY FINAL DRIVE 50 – 7 4H19 HOUSING AND KNIFEBANK, STRAW CHOPPER 121 – 78
1I13 HOLDDOWN, BATTERY 40 – 74 4J21 HOUSING AND PADDLE ASSEMBLY, UPPER
3G5 HOLDER, CUP 90 – 62 TAILINGS AUGER 125 – 46
3C3 HOOD, REAR 80 – 22 4C20 HOUSING AND SHOE GRAIN SUPPLY AUGERS 120 – 40
3C7 HOOD, REAR, ACCESS DOOR AND STOP 80 – 26 4C22 HOUSING AND SHOE GRAIN SUPPLY AUGERS 120 – 42
5D7 HORIZONTAL UNLOADING AUGER 1D24 HOUSING CONNECTORS, FUEL INJECTION PUMP 24 – 46
(17- AND 20-FT ) 130 – 54 2B19 HOUSING COVER, TRANSMISSION AND
5C25 HORIZONTAL UNLOADING AUGER DRIVE DIFFERENTIAL 50 – 13
GEARCASE 130 – 46 2C4 HOUSING, FINAL DRIVE 50 – 23
5D1 HORIZONTAL UNLOADING AUGER HOUSING 5D1 HOUSING, HORIZONTAL UNLOADING AUGER
(14- AND 17-FT ) 130 – 48 (14- AND 17-FT ) 130 – 48
5D3 HORIZONTAL UNLOADING AUGER HOUSING 5D3 HOUSING, HORIZONTAL UNLOADING AUGER
(17- AND 20-FT ) 130 – 50 (17- AND 20-FT ) 130 – 50
5D5 HORIZONTAL UNLOADING AUGER HOUSING 5D5 HOUSING, HORIZONTAL UNLOADING AUGER
(17- AND 20-FT ) 130 – 52 (17- AND 20-FT ) 130 – 52
5C23 HORIZONTAL UNLOADING AUGER HUB SUPPORT 2C12 HOUSING, HYDROSTATIC DRIVE PUMP 50 – 32
AND SWITCH 130 – 44 1D6 HOUSING, OIL FILTER 24 – 28
5C19 HORIZONTAL UNLOADING AUGER SWIVEL 130 – 40 1C17 HOUSING, REAR OIL SEAL 24 – 14
3G19 HOSE, A/C COMPRESSOR 90 – 77 2F24 HOUSING, SPINDLE, REAR AXLE 60 – 38
2J23 HOSE, CHARGE PRESSURE 70 – 84 2F25 HOUSING, SPINDLE, REAR AXLE
2G22 HOSE, HYDRAULIC, VARIABLE DRIVE, FEEDER GRAIN 60 – 39
HOUSE 70 – 10 4J14 HOUSING, TAILINGS ELEVATOR 125 – 38
4J6 HOSES AND LINES, CHAFF SPREADER 1D12 HOUSING, THERMOSTAT, FRONT 24 – 34
(DUAL MOTOR) 125 – 30 5C23 HUB SUPPORT AND SWITCH, HORIZONTAL
2E1 HOSES AND LINES, FOUR WHEEL DRIVE 50 – 72 UNLOADING AUGER 130 – 44
2D23 HOSES AND LINES, FOUR WHEEL DRIVE HYDRAU 1B10 HUB, ENGINE FAN 20 – 6
LIC, L H 50 – 70 1E2 HUB, FAN PULLEY 24 – 49
2H17 HOSES AND LINES, HEADER LIFT 70 – 30 1C18 HUB, FLYWHEEL 24 – 15
2I12 HOSES AND LINES, HYDRAULIC, CYLINDER 2H23 HYDRAULIC FILTER ASSEMBLY, MAIN 70 – 36
SPEED 70 – 48 2J21 HYDRAULIC FLAT O-RING KIT 70 – 82
2H13 HOSES AND LINES, HYDRAULIC, REEL FORE- 2G22 HYDRAULIC HOSE, VARIABLE DRIVE, FEEDER
AND-AFT, FRONT 70 – 26 HOUSE 70 – 10
2H9 HOSES AND LINES, HYDRAULIC, REEL PUMP 70 – 22 2H19 HYDRAULIC HOSES, CONTOUR MASTER (L H )
2D21 HOSES AND LINES, OIL COOLER, HYDROSTATIC 50 – 68 (OPTIONAL) 70 – 32
2J11 HOSES AND LINES, OIL COOLER, WET CLUTCH 70 – 72 2I12 HYDRAULIC LINES AND HOSES, CYLINDER
2D13 HOSES AND LINES, OIL, HYDROSTATIC DRIVE, SPEED 70 – 48
LOWER (TWO WHEEL DRIVE) 50 – 60 2H17 HYDRAULIC LINES AND HOSES, HEADER LIFT 70 – 30
2H7 HOSES AND LINES, REEL DRIVE, HYD , FRONT 70 – 20 2D23 HYDRAULIC LINES AND HOSES, L H , FOUR WH
2G16 HOSES AND LINES, REEL DRIVE, HYDRAULIC, EEL DRIVE 50 – 70
L H SIDE 70 – 4 2H13 HYDRAULIC LINES AND HOSES, REEL
2H11 HOSES AND LINES, REEL LIFT 70 – 24 FORE-AND-AFT, FRONT 70 – 26
2F3 HOSES AND LINES, STEERING, FRONT 60 – 16 2G16 HYDRAULIC LINES AND HOSES, REEL DRIVE
2F11 HOSES AND LINES, STEERING, REAR 60 – 24 L H SIDE 70 – 4
2J3 HOSES AND LINES, UNLOADING AUGER SWING 2H7 HYDRAULIC LINES AND HOSES, REEL DRIVE,
HYDRAULIC CYLINDER 70 – 64 FRONT 70 – 20
2I8 HOSES AND LINES, UPPER RETURN, HYDRAULIC 2H9 HYDRAULIC LINES AND HOSES, REEL PUMP 70 – 22
RESERVOIR 70 – 44 2E4 HYDRAULIC LINES, FOUR WHEEL DRIVE CASE
2J5 HOSES, GRAIN TANK UNLOADING DRIVE DRAIN 50 – 75
CYLINDER 70 – 66 2H15 HYDRAULIC LINES, REEL FORE-AND-AFT, L H
2H19 HOSES, HYDRAULIC, CONTOUR MASTER (L H ) SIDE 70 – 28
(OPTIONAL) 70 – 32 2J7 HYDRAULIC MOUNTING, UNLOADING AUGER
4K7 HOSES, LUBE, L H 125 – 58 SWING 70 – 68
4K5 HOSES, LUBE, R H 125 – 56 2I10 HYDRAULIC PRESSURE LINES AND HOSES 70 – 46
2D17 HOSES, OIL, HYDROSTATIC DRIVE, LOWER 2E7 HYDRAULIC PUMP CONNECTING HARDWARE,
(FOUR WHEEL DRIVE) 50 – 64 HYDROSTATIC DRIVE PUMP 50 – 78
2D15 HOSES, OIL, HYDROSTATIC DRIVE, LOWER 2I24 HYDRAULIC PUMP, MAIN 70 – 60
(TWO WHEEL DRIVE) 50 – 62 2I6 HYDRAULIC RETURN LINES 70 – 42
2I10 HOSES, PRESSURE, HYDRAULIC 70 – 46 2F5 HYDRAULIC STEERING HOSES, UPPER AND
1F7 HOSES, RADIATOR 30 – 14 ATTENUATOR 60 – 18
2F5 HOSES, STEERING, UPPER 60 – 18 2I8 HYDRAULIC UPPER RETURN LINES AND HOSES,
2J10 HOSES, TILT CYLINDER – CONTOUR MASTER 70 – 71 RESERVOIR 70 – 44
2D19 HOSES, UPPER, HYDROSTATIC DRIVE 2I1 HYDRAULIC/HYDROSTATIC OIL RESERVOIR
(FOUR WHEEL DRIVE) 50 – 66 AND MOUNTINGS 70 – 37
4J4 HOSES, VALVE, PUMP AND LINES, CHAFF 2C15 HYDROSTATIC DRIVE CHARGE PUMP 50 – 35
SPREADER 125 – 28 2C16 HYDROSTATIC DRIVE CHARGE PUMP
3E19 HOUSING AND AIR FILTER, CAB 90 – 28 (RING AND PINION) 50 – 36
10-18 CTS II COMBINE PC2752 (30-MAY-00)
PN=18
1A20
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2B10 HYDROSTATIC DRIVE CONTROL CABLE 50 – 4 K
2C17 HYDROSTATIC DRIVE DISPLACEMENT CONTROL
VALVE 50 – 38 1C8 KEY ENGINE SERVICE PARTS 24 – 4
2D19 HYDROSTATIC DRIVE HOSES, UPPER 4H25 KEY STOCK, METRIC KIT 121 – 84
(FOUR WHEEL DRIVE) 50 – 66 4K9 KEY STOCK, METRIC KIT 125 – 60
2B8 HYDROSTATIC DRIVE LEVER, CABLE AND SWITC 1C14 KEY, DAMPER 24 – 11
H 50 – 2 4J1 KIT, ADJUSTING SCREW, REEL DRIVE FLOW
2C19 HYDROSTATIC DRIVE MOTOR 50 – 40 CONTROL VALVE 125 – 25
2E5 HYDROSTATIC DRIVE MOTOR 50 – 76 3F15 KIT, AIR SUSPENSION SEAT 90 – 48
2C21 HYDROSTATIC DRIVE MOTOR KIT 50 – 42 3F17 KIT, AIR SUSPENSION SEAT 90 – 50
2D17 HYDROSTATIC DRIVE OIL LINES AND HOSES, 3F19 KIT, AIR SUSPENSION SEAT 90 – 52
LOWER (FOUR WHEEL DRIVE) 50 – 64 3F21 KIT, AIR SUSPENSION SEAT 90 – 54
2D13 HYDROSTATIC DRIVE OIL LINES AND HOSES, 3H1 KIT, CAB HARDWARE 90 – 84
LOWER (TWO WHEEL DRIVE) 50 – 60 3G21 KIT, COMPRESSOR HARDWARE R134A 90 – 80
2D15 HYDROSTATIC DRIVE OIL LINES AND HOSES, 1J17 KIT, CONVENIENCE OUTLET 40 – 102
LOWER (TWO WHEEL DRIVE) 50 – 62 1E7 KIT, CYLINDER HEAD 24 – 54
2C14 HYDROSTATIC DRIVE PISTON 50 – 34 1J1 KIT, ELECTRICAL CONNECTOR SERVICE 40 – 86
2C11 HYDROSTATIC DRIVE PUMP COVER 50 – 30 1J3 KIT, ELECTRICAL CONNECTOR SERVICE 40 – 88
2C9 HYDROSTATIC DRIVE PUMP, FRONT COVER AND 1C11 KIT, ENGINE OVERHAUL 24 – 8
SHAFT 50 – 28 1E7 KIT, ENGINE REBUILD 24 – 54
2C12 HYDROSTATIC DRIVE PUMP, HOUSING, 4D9 KIT, GRAIN LEAK 120 – 54
SWASHPLATE, AND SERVO CYLINDERS 50 – 32 1C21 KIT, HEAD BOLT 24 – 18
2C22 HYDROSTATIC MOTOR VALVE 50 – 43 2J21 KIT, HYDRAULIC FLAT O-RING 70 – 82
2D21 HYDROSTATIC OIL COOLER LINES AND HOSES 50 – 68 2C21 KIT, HYDROSTATIC DRIVE MOTOR 50 – 42
3I5 KIT, LOCKOUT ADAPTER – CONTOUR MASTER
(BELT PU & 4R CORN HEADS) 110 – 26
I 4H25 KIT, METRIC KEY STOCK 121 – 84
4K9 KIT, METRIC KEY STOCK 125 – 60
5C1 IDLER AND DRIVE TIGHTENER, CLEAN GRAIN 1C13 KIT, PISTON/LINER 24 – 10
ELEVATOR 130 – 22 4I25 KIT, SEAL REPAIR, REEL DRIVE FLOW
1B10 IDLER ARM, ENGINE FAN 20 – 6 CONTROL VALVE 125 – 24
1E13 IDLER PULLEY, AIR CONDITIONER COMPRESSOR 24 – 60 2F20 KIT, STEERING CYLINDER 60 – 33
3I10 IDLER SHAFT, DRUM AND CHAIN, FEEDER 1J5 KIT, TERMINAL AND WIRING 40 – 90
CONVEYOR 110 – 32 1D10 KIT, WATER PUMP SEAL 24 – 32
4C11 IDLER, BEATER DRIVE BELT 120 – 30 1C15 KIT,UNDERSIZE CRANKSHAFT
4C5 IDLER, STRIPPER BEATER DRIVE 120 – 24 (CONNECTING ROD JOURNAL) 24 – 12
4C1 INDICATOR, CABLE AND BRACKETS, CONCAVE 120 – 20 1E17 KIT,UNDERSIZED MAIN BEARING
4C3 INDICATOR, CONCAVE, CORN AND SMALL GRAIN 120 – 22 CRANKSHAFT 24 – 64
4B24 INDICATOR, SPIKE TOOTH 120 – 18 4H17 KNIFEBANK AND HOUSING, STRAW CHOPPER 121 – 76
1D22 INJECTION PUMP GEAR 24 – 44 4H19 KNIFEBANK AND HOUSING, STRAW CHOPPER 121 – 78
1D22 INJECTION PUMP LUBE LINE 24 – 44 4I21 KNOB, CONTROL, CHECK VALVE AND ROD,
1D22 INJECTION PUMP, ELECTRONIC FUEL 24 – 44 CHAFF SPREADER 125 – 20
1H21 INLET AIR TEMPERATURE SWITCH 40 – 58
2D1 INNER COVER 50 – 48
2B22 INPUT SHAFT, TRANSMISSION 50 – 16 L
1C21 INSERTS, VALVE SEAT 24 – 18
1F19 INSTRUMENT PANEL, CAB POST 40 – 6 1G22 L H MAIN WIRING HARNESS, L H FRONT 40 – 34
3E21 INSTRUMENT PANEL, CAB POST 90 – 30 1G24 L H MAIN WIRING HARNESS, L H FRONT 40 – 36
1D14 INTAKE MANIFOLD 24 – 36 1H5 L H AND R H MAIN WIRING HARNESS, REAR 40 – 42
1D14 INTAKE MANIFOLD GASKET 24 – 36 3D3 L H FRONT CORNER SHEET AND DOOR 80 – 48
3I22 INTAKE SHIELD 110 – 44 1H1 L H MAIN WIRING HARNESS, L H CENTER 40 – 38
1F1 INTAKE TUBES AND AIR CLEANER 30 – 8 3C22 L H SERVICE ACCESS SHIELD 80 – 42
1C21 INTAKE VALVES 24 – 18 2F13 L H STEERING LINES 60 – 26
1D1 INTAKE, ENGINE OIL PUMP 24 – 23 3E9 LADDER AND HANDRAIL, OPERATOR’S PLATFORM 90 – 18
1B14 INTERCOOLER 20 – 10 3B23 LADDER AND LANDING, REAR 80 – 18
3D23 INTERIOR TRIM PANELS, CAB 90 – 8 3C1 LADDER LANDING LATCH ARM, REAR 80 – 20
4G7 INTERMEDIATE SHAFT MOUNTING, CYLINDER 1K2 LAMP ASSEMBLY, REAR L H SIDE 40 – 112
DRIVE, DUAL-RANGE 121 – 42 1K1 LAMP ASSEMBLY, REAR R H SIDE 40 – 111
4G9 INTERMEDIATE SHEAVE, CYLINDER DRIVE, 1J13 LAMP, INSTALLATION 40 – 98
DUAL-RANGE 121 – 44 1J25 LAMPS, LICENSE PLATE
(EXPORT) 40 – 110
3B23 LANDING AND LADDER, REAR 80 – 18
J 3E17 LANDING AND MIRROR, CAB (R H ) 90 – 26
3E15 LANDING AND MIRROR, CAB, L H 90 – 24
1C6 JETS, PISTON COOLING 24 – 2 3C1 LANDING LATCH ARM, REAR LADDER 80 – 20
3I14 LATCH HANDLE, FEED PLATE 110 – 36
3E1 LATCH, CAB DOOR 90 – 10
CTS II COMBINE PC2752 (30-MAY-00) 10-19
PN=19
1A21
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
5C15 LATCH, GRAIN TANK CLEAN OUT CHUTE 130 – 36 2I10 LINES, PRESSURE, HYDRAULIC 70 – 46
4C19 LATCHES, HANDLE, SHOE GRAIN SUPPLY AUGER 2I6 LINES, RETURN, HYDRAULIC 70 – 42
CLEANOUT DOOR 120 – 38 2F15 LINES, STEERING R H SIDE 60 – 28
4D9 LEAK KIT, GRAIN 120 – 54 2F13 LINES, STEERING, L H 60 – 26
3D7 LEFT SIDE FRONT SHIELD ASSEMBLY 80 – 52 1E23 LINES, TANK FUEL 30 – 6
3D11 LEFT SIDE SHIELD ASSEMBLY 80 – 56 1D16 LINES, TURBOCHARGER OIL 24 – 38
1I1 LEVEL MONITOR HARNESS, DUAL, GRAIN TANK 40 – 62 2B20 LINKAGE AND LEVER, GEARSHIFT 50 – 14
1H23 LEVEL MONITOR, GRAIN TANK 40 – 60 3E23 LINKAGE AND LEVER, GEARSHIFT 90 – 32
2B20 LEVER AND LINKAGE, GEARSHIFT 50 – 14 4G23 LINKAGE, SHEAVE, FAN DRIVE SPEED CONTROL 121 – 58
3E23 LEVER AND LINKAGE, GEARSHIFT 90 – 32 4G21 LINKAGE, SPEED CONTROL, FAN DRIVE 121 – 56
1J25 LICENSE PLATE LAMPS 5B21 LOADING AUGER, CLEAN GRAIN 130 – 16
(EXPORT) 40 – 110 5B23 LOADING AUGER, CLEAN GRAIN, FOLD 130 – 18
2H21 LIFT CYLINDER, HEADER, HYDRAULIC 70 – 34 2C23 LOBE MOTOR, CAM 50 – 44
1C25 LIFT STRAPS, ENGINE 24 – 22 3I5 LOCKOUT ADAPTER KIT – CONTOUR MASTER
1I14 LIGHT SWITCH, SHOE ADJUSTING 40 – 75 (BELT PU & 4R CORN HEADS) 110 – 26
1F14 LIGHT, CAB DOME 40 – 1 4G3 LOCKOUT ARM, DUAL-RANGE 121 – 38
1H23 LIGHT, GRAIN TANK 40 – 60 3I3 LOCKOUT ASSEMBLY – CONTOUR MASTER
1I1 LIGHT, UNLOADING AUGER, GRAIN TANK 40 – 62 (OPTIONAL) 110 – 24
1F23 LIGHTING, AUXILIARY, FIELD 40 – 10 1H1 LOGIC MODULE 40 – 38
1F21 LIGHTS, CAB ROOF 40 – 8 1H3 LOGIC MODULE 40 – 40
1J23 LIGHTS, FIELD 40 – 108 1H7 LOGIC MODULE 40 – 44
1F22 LIGHTS, FRONT AND REAR TAIL 40 – 9 1H13 LOW SHAFT SPEED SENSORS AND BRACKETS 40 – 50
1F22 LIGHTS, FRONT AND REAR TURN 40 – 9 4I9 LOWER CURTAIN, STRAW SPREADER 125 – 8
1I3 LIGHTS, SIDE FINDER, L H AND R H 40 – 64 4H23 LOWER DOOR, STRAW CHOPPER 121 – 82
1J21 LIGHTS, TRANSPORT WARNING 40 – 106 1J9 LOWER HARNESS CONNECTORS FOR 6076 ENGINE 40 – 94
1H23 LIMIT SWITCH, GRAIN TANK 40 – 60 1H17 LOWER HARNESS FOR 6076 ENGINE 40 – 54
1D22 LINE, INJECTION PUMP LUBE 24 – 44 2D17 LOWER HYDROSTATIC DRIVE OIL LINES AND
1C13 LINER O-RINGS 24 – 10 HOSES (FOUR WHEEL DRIVE) 50 – 64
1C13 LINER SHIM 24 – 10 2D13 LOWER HYDROSTATIC DRIVE OIL LINES AND
1C13 LINERS, CYLINDER 24 – 10 HOSES (TWO WHEEL DRIVE) 50 – 60
4J2 LINES AND FITTINGS, CHAFF SPREADER 125 – 26 2D15 LOWER HYDROSTATIC DRIVE OIL LINES AND
4J6 LINES AND HOSES, CHAFF SPREADER HOSES (TWO WHEEL DRIVE) 50 – 62
(DUAL MOTOR) 125 – 30 2F9 LOWER STEERING COLUMN 60 – 22
2E1 LINES AND HOSES, FOUR WHEEL DRIVE 50 – 72 3G8 LOWER STEERING COLUMN 90 – 66
2D23 LINES AND HOSES, FOUR WHEEL DRIVE HYDRAU 5E6 LOWER TAILINGS AUGER BELT 170 – 5
LIC, L H 50 – 70 4J18 LOWER TAILINGS AUGER CHAIN TIGHTENER 125 – 42
2H17 LINES AND HOSES, HEADER LIFT HYDRAULIC 70 – 30 4J19 LOWER TAILINGS AUGER DRIVE TIGHTENER 125 – 44
2I12 LINES AND HOSES, HYDRAULIC, CYLINDER 4J10 LOWER TAILINGS AUGER SHAFT AND TIGHTENER 125 – 34
SPEED 70 – 48 4J12 LOWER TAILINGS AUGER TROUGH 125 – 36
2H7 LINES AND HOSES, HYDRAULIC, REEL DRIVE, 4J17 LOWER TROUGH SUPPORT AND TAILINGS
FRONT 70 – 20 DRIVE BRACKET 125 – 41
2H13 LINES AND HOSES, HYDRAULIC, REEL FORE- 5D19 LUBE BANK, UNLOADING AUGER 130 – 68
AND-AFT, FRONT 70 – 26 4K7 LUBE HOSES L H 125 – 58
2H9 LINES AND HOSES, HYDRAULIC, REEL PUMP 70 – 22 4K5 LUBE HOSES R H 125 – 56
2D21 LINES AND HOSES, OIL COOLER, HYDROSTATIC 50 – 68 4E7 LUBE LINES AND BEARING, MODULE FRONT 120 – 78
2J11 LINES AND HOSES, OIL COOLER, WET CLUTCH 70 – 72 2H1 LUBE OIL PUMP WITH DUST SUPPRESSION 70 – 14
2D13 LINES AND HOSES, OIL, HYDROSTATIC DRIVE, 2G24 LUBE OIL PUMP, FEEDER HOUSE OIL COOLER 70 – 12
LOWER (TWO WHEEL DRIVE) 50 – 60 2B22 LUBE PUMP, TRANSMISSION INPUT SHAFT 50 – 16
2G16 LINES AND HOSES, REEL DRIVE, HYDRAULIC,
L H SIDE 70 – 4
2H11 LINES AND HOSES, REEL LIFT 70 – 24 M
2F3 LINES AND HOSES, STEERING, FRONT 60 – 16
2F11 LINES AND HOSES, STEERING, REAR 60 – 24 1E14 MAGNETIC PICK-UP (ENGINE) 24 – 61
2J3 LINES AND HOSES, UNLOADING AUGER SWING 1C6 MAIN BEARING CAPS 24 – 2
HYDRAULIC CYLINDER 70 – 64 1C16 MAIN BEARINGS 24 – 13
2I8 LINES AND HOSES, UPPER RETURN, HYDRAULIC 2H23 MAIN HYDRAULIC FILTER ASSEMBLY 70 – 36
RESERVOIR 70 – 44 2I24 MAIN HYDRAULIC PUMP 70 – 60
1E3 LINES, FUEL FILTER 24 – 50 5D23 MAIN VALVE BLOCK SOLENOID
1D22 LINES, FUEL LEAK-OFF 24 – 44 DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 3
4J4 LINES, HOSES, VALVE AND PUMP, CHAFF 1H3 MAIN WIRING HARNESS,L H CENTER 40 – 40
SPREADER 125 – 28 2D3 MANIFOLD AND PACKING 50 – 50
2H15 LINES, HYDRAULIC, REEL FORE-AND-AFT, 3G18 MANIFOLD, A/C COMPRESSOR R134A 90 – 76
L H SIDE 70 – 28 1D14 MANIFOLD, INTAKE 24 – 36
2D17 LINES, OIL, HYDROSTATIC DRIVE, LOWER 1D12 MANIFOLD, WATER, FRONT 24 – 34
(FOUR WHEEL DRIVE) 50 – 64 1D18 MANIFOLDS, EXHAUST 24 – 40
2D15 LINES, OIL, HYDROSTATIC DRIVE, LOWER 2E19 MASTER CYLINDER, BRAKE 60 – 8
(TWO WHEEL DRIVE) 50 – 62
10-20 CTS II COMBINE PC2752 (30-MAY-00)
PN=20
1A22
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2E17 MASTER CYLINDER, RESERVOIR AND BRAKE N
LINES 60 – 6
3D17 MAT, FLOOR, AND CAB PANELS 90 – 2 1E1 NOZZLE, FUEL INJECTION 24 – 48
4H25 METRIC KEY STOCK KIT 121 – 84 1D20 NOZZLES, FUEL INJECTION/LINES, FUEL 24 – 42
4K9 METRIC KEY STOCK KIT 125 – 60
3E17 MIRROR AND LANDING, CAB (R H ) 90 – 26
3E15 MIRROR AND LANDING, CAB, L H 90 – 24 O
4D25 MODULE ASSEMBLY 120 – 70
4E3 MODULE CRANK OUT SYSTEM 120 – 74 1D10 O-RING, WATER PUMP 24 – 32
4E20 MODULE DRIVE GEARCASE, L H 121 – 6 3G19 O-RINGS, A/C COMPRESSOR HOSE 90 – 77
4E18 MODULE DRIVE GEARCASE, R H 121 – 4 1C13 O-RINGS, LINER 24 – 10
4E22 MODULE DRIVES, ENGINE GEARCASE 121 – 8 1D5 OIL COOLER ADAPTER 24 – 27
4E24 MODULE DRIVES, ENGINE GEARCASE 121 – 10 2J13 OIL COOLER AND A/C CONDENSER 70 – 74
4E5 MODULE FRAME AND COVERS 120 – 76 1D4 OIL COOLER BYPASS ADAPTER 24 – 26
4E7 MODULE FRONT BEARING AND LUBE LINES 120 – 78 1D4 OIL COOLER BYPASS TUBES 24 – 26
4E16 MODULE GEARBOX, SHAFT AND COUPLING 121 – 2 1D5 OIL COOLER COVER 24 – 27
4E9 MODULE GRATE ASSEMBLY, FINGER BAR AND 2D21 OIL COOLER LINES AND HOSES, HYDROSTATIC 50 – 68
FILLER PLATE 120 – 80 2J11 OIL COOLER LINES AND HOSES, WET CLUTCH 70 – 72
3C5 MODULE MOUNTING TRACKS AND SUPPORTS 80 – 24 1D5 OIL COOLER TUBES 24 – 27
3B7 MODULE RAILS, TINE SEPARATOR 80 – 2 1D5 OIL COOLER, ENGINE 24 – 27
4E1 MODULE REAR SHIELDS 120 – 72 2H1 OIL COOLER, FEEDER HOUSE 70 – 14
5G13 MODULE SAFETY DECALS, SEPARATOR 170 – 61 2H3 OIL COOLER, FEEDER HOUSE GEARCASE 70 – 16
4E11 MODULE TINE SEPARATORS 120 – 82 1B21 OIL COOLER, RADIATOR 20 – 18
1H5 MODULE WIRING HARNESS 40 – 42 1B19 OIL DRAIN, ENGINE CRANKCASE 20 – 16
1I21 MODULE, CENTRAL ELECTRONICS 40 – 82 2J15 OIL FILTER ASSEMBLY, ENGINE GEARCASE 70 – 76
1H1 MODULE, LOGIC 40 – 38 1D6 OIL FILTER BASE 24 – 28
1H3 MODULE, LOGIC 40 – 40 1D6 OIL FILTER BYPASS VALVE 24 – 28
1H7 MODULE, LOGIC 40 – 44 1D6 OIL FILTER HOUSING 24 – 28
2I22 MODULE, SIX STACK SOLENOID CONTROL VALVE 1D6 OIL FILTER HOUSING GASKET 24 – 28
ASSEMBLY & MOUNTINGS 70 – 58 1D6 OIL FILTER, ENGINE 24 – 28
1H11 MONITOR AND WIRING HARNESS, HARVESTRAK 40 – 48 2D17 OIL HOSES, HYDROSTATIC DRIVE, LOWER
1I1 MONITOR HARNESS, DUAL LEVEL, GRAIN TANK 40 – 62 (FOUR WHEEL DRIVE) 50 – 64
1H23 MONITOR, LEVEL, GRAIN TANK 40 – 60 2D15 OIL HOSES, HYDROSTATIC DRIVE, LOWER
1I11 MOTOR AND BRACKET, REEL SPEED 40 – 72 (TWO WHEEL DRIVE) 50 – 62
2C21 MOTOR KIT, HYDROSTATIC DRIVE 50 – 42 2D13 OIL LINES AND HOSES, HYDROSTATIC DRIVE,
2C22 MOTOR VALVE, HYDROSTATIC 50 – 43 LOWER (TWO WHEEL DRIVE) 50 – 60
1I7 MOTOR, ADJUSTING, CONCAVE 40 – 68 2D17 OIL LINES HYDROSTATIC DRIVE, LOWER
1I4 MOTOR, ADJUSTING, SEPARATOR FAN DRIVE 40 – 65 (FOUR WHEEL DRIVE) 50 – 64
2C23 MOTOR, CAM LOBE 50 – 44 2D15 OIL LINES HYDROSTATIC DRIVE, LOWER
2G20 MOTOR, CHAFF SPREADER (EATON) 70 – 8 (TWO WHEEL DRIVE) 50 – 62
2C19 MOTOR, HYDROSTATIC DRIVE 50 – 40 1D16 OIL LINES, TURBOCHARGER 24 – 38
2E5 MOTOR, HYDROSTATIC DRIVE 50 – 76 1D8 OIL PAN 24 – 30
4I19 MOUNTING SUPPORT, CHAFF SPREADER 125 – 18 1D8 OIL PAN DRAIN VALVE 24 – 30
1I19 MOUNTING SUPPORT, ELECTRONIC CONTROL 1D8 OIL PAN GASKET 24 – 30
UNIT 40 – 80 1D5 OIL PRESSURE REGULATING VALVE 24 – 27
1I17 MOUNTING SUPPORT, ELECTRONIC CONTROL 1D6 OIL PRESSURE REGULATING VALVE 24 – 28
UNIT (SN -XXXXXX) 40 – 78 1C14 OIL PUMP DRIVE GEAR 24 – 11
3C5 MOUNTING TRACKS AND SUPPORTS, MODULE 80 – 24 1D2 OIL PUMP DRIVE GEAR 24 – 24
1I9 MOUNTING, ALTERNATOR 40 – 70 1D2 OIL PUMP GASKET 24 – 24
2J5 MOUNTING, GRAIN TANK UNLOADING DRIVE 1D1 OIL PUMP INTAKE 24 – 23
CYLINDER 70 – 66 1D1 OIL PUMP INTAKE GASKET 24 – 23
2I4 MOUNTING, ONE GALLON ACCUMULATOR 70 – 40 1D2 OIL PUMP, ENGINE 24 – 24
2I2 MOUNTING, ONE HALF GALLON SINGLE 2I1 OIL RESERVOIR AND MOUNTINGS, HYDRAULIC/
ACCUMULATOR 70 – 38 HYDROSTATIC 70 – 37
2J7 MOUNTING, UNLOADING AUGER SWING 1C19 OIL SEAL, CRANKSHAFT FRONT 24 – 16
HYDRAULIC 70 – 68 1C17 OIL SEAL, REAR 24 – 14
2I22 MOUNTINGS, SIX STACK SOLENOID CONTROL 3G18 OIL, A/C COMPRESSOR R134A 90 – 76
VALVE 70 – 58 1C5 OIL, ENGINE (TORQ-GARD, PLUS-50) 24 – 1
2I20 MOUNTINGS, SOLENOID CONTROL VAVLE 2I4 ONE GALLON ACCUMULATOR AND MOUNTING 70 – 40
MODULE ASSEMBLY 70 – 56 2I2 ONE HALF GALLON SINGLE ACCUMULATOR AND
1B13 MOUNTS, ENGINE 20 – 9 MOUNTING 70 – 38
3C17 MUD AND FAN DRIVE SHIELDS (L-H SIDE) 80 – 36 3E9 OPERATOR’S PLATFORM LADDER AND HANDRAIL 90 – 18
2E3 MUD SHIELDS 50 – 74 3F5 OPERATOR’S SEAT AND BACKREST 90 – 38
3D5 MUD SHIELDS (R H SIDE) 80 – 50 3F7 OPERATOR’S SEAT SEATBELT 90 – 40
1F5 MUFFLER AND EXHAUST PIPES 30 – 12 2C24 OUTER COVER, BEARINGS, SEALS AND SHAFT
CAM LOBE MOTOR 50 – 46
1J19 OUTLET, CONVENIENCE 40 – 104
CTS II COMBINE PC2752 (30-MAY-00) 10-21
PN=21
1A23
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1J8 OUTLET, ELECTRICAL SERVICE 40 – 93 3G20 PULLEY, A/C COMPRESSOR R134A 90 – 79
1C11 OVERHAUL KIT, ENGINE 24 – 8 1E13 PULLEY, AIR CONDITIONER COMPRESSOR FAN 24 – 60
1F17 OVERHEAD CONSOLE PANEL 40 – 4 1E9 PULLEY, CRANKSHAFT AND DAMPERS 24 – 56
1E2 PULLEY, FAN, HUB 24 – 49
4G13 PULLEY, SECONDARY COUNTERSHAFT DRIVE 121 – 48
P 4F7 PUMP AND SEPARATOR DRIVE, ENGINE
GEARCASE 121 – 18
2D3 PACKING AND MANIFOLD 50 – 50 4F9 PUMP DRIVE AND SEPARATOR, GEARCASE 121 – 20
4J21 PADDLE ASSEMBLY AND HOUSING, UPPER 4F5 PUMP DRIVE SHAFT AND SEPARATOR DRIVE
TAILINGS AUGER 125 – 46 WET-CLUTCH, GEARCASE 121 – 16
1D8 PAN, OIL 24 – 30 4J8 PUMP, CHAFF SPREADER 125 – 32
4D23 PAN, SHAKER 120 – 68 2C9 PUMP, DRIVE, HYDROSTATIC 50 – 28
4I17 PAN, WINGS AND SEALS, CHAFF SPREADER 1E21 PUMP, FUEL 30 – 4
(DUAL MOTOR) 125 – 16 1D22 PUMP, FUEL INJECTION 24 – 44
1G3 PANEL, ARMREST CONTROL 40 – 14 1D25 PUMP, FUEL TRANSFER (ROBERT BOSCH) 24 – 47
1F19 PANEL, CAB POST INSTRUMENT 40 – 6 2C15 PUMP, HYDROSTATIC DRIVE CHARGE 50 – 35
3E21 PANEL, CAB POST INSTRUMENT 90 – 30 2C16 PUMP, HYDROSTATIC DRIVE CHARGE
1F17 PANEL, OVERHEAD CONSOLE 40 – 4 (RING AND PINION) 50 – 36
3D17 PANELS AND FLOOR MAT, CAB 90 – 2 4J4 PUMP, LINES, HOSES AND VALVE, CHAFF
3D23 PANELS, CAB INTERIOR TRIM 90 – 8 SPREADER 125 – 28
1H1 PARK BRAKE SWITCH 40 – 38 2G24 PUMP, LUBE OIL, FEEDER HOUSE OIL COOLER 70 – 12
2E13 PARKING BRAKE PEDAL AND SEAL 60 – 2 2I24 PUMP, MAIN HYDRAULIC 70 – 60
1C8 PARTS, KEY ENGINE SERVICE 24 – 4 1D2 PUMP, OIL ENGINE 24 – 24
2E13 PEDAL, PARKING BRAKE 60 – 2 2H9 PUMP, REEL, HYDRAULIC LINES AND HOSES 70 – 22
2E15 PEDALS, BRAKE AND CYLINDERS, MASTER 60 – 4 2F1 PUMP, STEERING 60 – 14
1E14 PICK-UP, MAGNETIC (ENGINE) 24 – 61 1D10 PUMP, WATER 24 – 32
2J1 PICKUP DRIVE PUMP, REEL/BELT 70 – 62 1C23 PUSH RODS 24 – 20
2B24 PINION SHAFT, TRANSMISSION 50 – 18
2C7 PINION, FINAL DRIVE 50 – 26
1F5 PIPES, MUFFLER AND EXHAUST 30 – 12 Q
2C14 PISTON ASSEMBLY, HYDROSTATIC DRIVE 50 – 34
1C6 PISTON COOLING JETS 24 – 2 2D4 QUILL, BEARING AND COVER 50 – 51
1C13 PISTON RINGS 24 – 10
1C13 PISTON/LINER KIT 24 – 10
1C13 PISTON, ENGINE 24 – 10 R
2D5 PISTONS, CAM AND CARRIER 50 – 52
4G17 PIVOT ARM DRIVE TIGHTENER, CLEANING SHOE 1H7 R H MAIN WIRING HARNESS 40 – 44
AND CONVEYOR AUGER 121 – 52 3C20 R H SERVICE ACCESS SHIELD 80 – 40
2D7 PIVOTS, CAPS AND YOKE 50 – 54 2F15 R H SIDE STEERING LINES 60 – 28
2B14 PLANETARY FINAL DRIVE WIDE-SPACED 1F7 RADIATOR AND HOSES 30 – 14
DUAL WHEELS 50 – 8 3B11 RADIATOR DOOR, ENGINE ACCESS DOOR,
5D9 PLATE, CROSS AUGER BEARING, L H 130 – 56 HANDRAILS 80 – 6
3I1 PLATES, CLOSURE, FEEDER HOUSE – CONTOUR 3B13 RADIATOR SHELL AND SEALS 80 – 8
MASTER 110 – 22 1B21 RADIATOR WITH OIL COOLER, A/C CONDENSER
3H23 PLATES, WEAR, FEEDER HOUSE – CONTOUR AND AIR INTER COOLER 20 – 18
MASTER 110 – 20 1G16 RADIO, SPEAKERS AND ANTENNA 40 – 28
3B21 PLATFORM AND STEP, ENGINE ACCESS 80 – 16 3B7 RAILS, TINE SEPARTATOR MODULE 80 – 2
3B15 PLATFORM, ENGINE 80 – 10 4B14 RASP BAR CONCAVE AND GRATE 120 – 8
2G23 PLATFORM, 200 SERIES CUTTING, CONVERSION 4B12 RASP BAR THRESHING CYLINDER 120 – 6
PARTS 70 – 11 3D21 REAR AND SIDE SEALS, CAB 90 – 6
1F19 POST INSTRUMENT PANEL, CAB 40 – 6 2F24 REAR AXLE SPINDLE HOUSING 60 – 38
3E21 POST INSTRUMENT PANEL, CAB 90 – 30 2F25 REAR AXLE SPINDLE HOUSING – GRAIN 60 – 39
4D7 PRECLEANER CHAFFER FRAME 120 – 52 2G1 REAR AXLE SPINDLES 60 – 40
4D11 PRECLEANER CHAFFER FRAME ARMS 120 – 56 2F23 REAR AXLE SUPPORT 60 – 36
4D5 PRECLEANING CHAFFER 120 – 50 2F17 REAR AXLE TRASH SHIELD 60 – 30
2G14 PRESSURE GAUGE, ACCUMULATOR 70 – 2 2F21 REAR AXLE, ADJUSTABLE 60 – 34
2J23 PRESSURE HOSE, CHARGE 70 – 84 2F22 REAR AXLE, FIXED (GRAIN) 60 – 35
2J17 PRESSURE REGULATOR, ENGINE GEARCASE 70 – 78 3D1 REAR CORNER SHEET, L H 80 – 46
2I10 PRESSURE, HYDRAULIC, LINES AND HOSES 70 – 46 3C3 REAR HOOD 80 – 22
3G12 PRESSURIZER AND AIR CONDITIONING/ 3C7 REAR HOOD ACCESS DOOR AND STOP 80 – 26
HEATER FAN 90 – 70 1H5 REAR HOOD AND MODULE WIRING HARNESSES 40 – 42
4F13 PRIMARY COUNTERSHAFT GEARCASE 121 – 24 3C9 REAR HOOD DOOR 80 – 28
4F15 PRIMARY COUNTERSHAFT GEARCASE 121 – 26 3B23 REAR LADDER AND LANDING 80 – 18
4F11 PRIMARY COUNTERSHAFT, DRIVE SHAFT AND 3C1 REAR LADDER LANDING LATCH ARM 80 – 20
GEARCASE MOUNTING 121 – 22 1K2 REAR LAMP ASSEMBLY, L H SIDE 40 – 112
4F19 PRIMARY COUNTERSHAFT, SUPPORTS AND VARI- 1K1 REAR LAMP ASSEMBLY, R H SIDE 40 – 111
ABLE SHEAVE 121 – 30 4K3 REAR LEFT SIDE TAILINGS SHIELD 125 – 54
10-22 CTS II COMBINE PC2752 (30-MAY-00)
PN=22
1A24
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1C17 REAR OIL SEAL 24 – 14 1C23 ROCKER ARMS 24 – 20
1C17 REAR OIL SEAL GASKET 24 – 14 4I21 ROD, KNOB, CONTROL AND CHECK VALVE,
1C17 REAR OIL SEAL HOUSING 24 – 14 CHAFF SPREADER 125 – 20
4E1 REAR SHIELDS, MODULE 120 – 72 1C13 RODS, CONNECTING 24 – 10
2F11 REAR STEERING LINES AND HOSES 60 – 24 1C23 RODS, PUSH 24 – 20
1B13 REAR SUPPORT, ENGINE MOUNTS 20 – 9 2G5 RODS, TIE, STEERING 60 – 44
4K3 REAR TAILINGS SHIELD, LEFT SIDE 125 – 54 3B7 ROLLERS, FRONT MODULE 80 – 2
5G9 REAR WHEEL DECALS 170 – 56 3E7 ROOF AND SUPPORTS, CAB 90 – 16
2G10 REAR WHEELS 60 – 50 1F21 ROOF, CAB LIGHTS 40 – 8
2G8 REAR WHEELS AND WHEEL WEIGHTS 60 – 48 5E4 ROTARY SCREEN BELTS 170 – 3
1H5 REAR, L H AND R H MAIN WIRING HARNESS 40 – 42 1B8 ROTARY SCREEN DOOR AND SCREEN 20 – 4
5E5 REEL BELTS 170 – 4 1B6 ROTARY SCREEN DRIVE 20 – 2
2G18 REEL DRIVE FLOW CONTROL VALVE 70 – 6 4H13 ROTOR STRAW CHOPPER, FINE CUT (PADDLED
4I23 REEL DRIVE FLOW CONTROL VALVE 125 – 22 NARROW (670401- ) 121 – 72
4J1 REEL DRIVE FLOW CONTROL VALVE ADJUSTING 4H11 ROTOR STRAW CHOPPER, FINE CUT (STRAIGHT
SCREW KIT 125 – 25 NARROW (670401- ) 121 – 70
4I25 REEL DRIVE FLOW CONTROL VALVE SEAL 4H15 ROTOR, SHEAVE AND STRAW CHOPPER 121 – 74
REPAIR KIT 125 – 24
2G16 REEL DRIVE HYDRAULIC LINES AND HOSES
L H SIDE 70 – 4 S
2H7 REEL DRIVE HYDRAULIC LINES AND HOSES,
FRONT 70 – 20 5E7 SAFETY DECALS AND LOCATIONS 170 – 6
2H13 REEL FORE-AND-AFT HYDRAULIC LINES AND 5E9 SAFETY DECALS AND LOCATIONS 170 – 8
HOSES, FRONT 70 – 26 5E11 SAFETY DECALS AND LOCATIONS 170 – 10
2H15 REEL FORE-AND-AFT HYDRAULIC LINES, L H 5E13 SAFETY DECALS AND LOCATIONS 170 – 12
SIDE 70 – 28 5E15 SAFETY DECALS AND LOCATIONS 170 – 14
2I16 REEL LIFT AND CYLINDER SPEED, SOLENOID 5E17 SAFETY DECALS AND LOCATIONS 170 – 16
CONTROL VALVE 70 – 52 5E19 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 18
2H11 REEL LIFT LINES AND HOSES 70 – 24 5E21 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 20
2H9 REEL PUMP HYDRAULIC LINES AND HOSES 70 – 22 5E23 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 22
1I11 REEL SPEED MOTOR AND BRACKET 40 – 72 5F1 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 24
4H3 REEL/BELT PICKUP CHARGE PUMP MOUNTING 5F3 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 26
AND SHEAVE 121 – 62 5F5 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 28
4H4 REEL/BELT PICKUP CHARGE PUMP MOUNTING 5F9 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 32
AND SHEAVE 121 – 63 5F11 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 34
2J1 REEL/BELT PICKUP DRIVE PUMP 70 – 62 5F13 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 36
1I6 REGULATOR, ALTERNATOR AND VOLTAGE – 5F15 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 38
BOSCH 40 – 67 5F17 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 40
2J17 REGULATOR, PRESSURE, ENGINE GEARCASE 70 – 78 5F19 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 42
1I15 RELAYS, ENGINE CIRCUIT BREAKER 40 – 76 5F21 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 44
2I18 RELIEF VALVE, SOLENOID CONTROL – CONTOUR 5F23 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 46
MASTER 70 – 54 5G1 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 48
2I18 RELIEF VALVE, SOLENOID CONTROL VALVE 5G3 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 50
UNLOAD MODULE 70 – 54 3H19 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE 110 – 16
2I8 RESERVOIR HYDRAULIC UPPER RETURN LINES 3H17 SAFETY STOP, DRIVE SHIELDS, FEEDER HOUSE 110 – 14
AND HOSES 70 – 44 5D17 SAMPLING TROUGH, GRAIN TANK 130 – 66
2E17 RESERVOIR, BRAKE LINES AND MASTER 1B6 SCREEN DRIVE, ROTARY 20 – 2
CYLINDER 60 – 6 1B8 SCREEN, ROTARY DOOR 20 – 4
2I1 RESERVOIR, OIL, MOUNTINGS, HYDRAULIC/ 4I25 SEAL REPAIR KIT, REEL DRIVE FLOW
HYDROSTATIC 70 – 37 CONTROL VALVE 125 – 24
2E9 RESERVOIR, RETURN LINE 50 – 80 3G22 SEAL, A/C COMPRESSOR KIT R134A 90 – 81
3I20 RETURN FLOOR, FEEDER HOUSE 110 – 42 3G18 SEAL, A/C COMPRESSOR R134A 90 – 76
2E9 RETURN LINE, RESERVOIR 50 – 80 1H14 SEAL, DEFLECTOR – LESS HARVESTRAK 40 – 51
2I8 RETURN LINES AND HOSES, UPPER HYDRAULIC 1C19 SEAL, FRONT OIL 24 – 16
RESERVOIR 70 – 44 2E13 SEAL, PARKING BRAKE PEDAL 60 – 2
2I6 RETURN LINES, HYDRAULIC 70 – 42 1C17 SEAL, REAR OIL 24 – 14
3F1 REVERSER FOOT CONTROL, FEEDER HOUSE 90 – 34 4B8 SEAL, STONE TRAP AND DOOR, SEPARATOR/
3H9 REVERSER FOOT CONTROL, FEEDER HOUSE 110 – 6 FEEDER HOUSE 120 – 2
3H7 REVERSER GEAR BOX 110 – 4 1D10 SEAL, TUBE 24 – 32
3J5 REVERSER) 110 – 52 1D10 SEAL, WATER PUMP OIL 24 – 32
3D9 RIGHT SIDE FRONT SHIELD ASSEMBLY 80 – 54 3H23 SEALS, FEEDER HOUSE – CONTOUR MASTER 110 – 20
3D13 RIGHT SIDE SHIELD ASSEMBLY 80 – 58 3D19 SEALS, FOAM, SOUND DEADENING, CAB 90 – 4
1D10 RING, WATER PUMP RETAINING 24 – 32 4I17 SEALS, PAN AND WINGS, CHAFF SPREADER
1C13 RINGS, PISTON 24 – 10 (DUAL MOTOR) 125 – 16
1C24 ROCKER ARM COVER 24 – 21 3D21 SEALS, REAR AND SIDE, CAB 90 – 6
1C24 ROCKER ARM COVER GASKET 24 – 21 2C24 SEALS, SHAFT, OUTER COVER AND BEARINGS
1C23 ROCKER ARM SHAFT 24 – 20 CAM LOBE MOTOR 50 – 46
CTS II COMBINE PC2752 (30-MAY-00) 10-23
PN=23
1A25
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
3B13 SEALS, SHELL, RADIATOR 80 – 8 3H5 SHEAVE, MOUNTINGS, FRONT VARIABLE
3F9 SEAT ADJUST FORE-AND-AFT 90 – 42 DRIVE 110 – 2
3F5 SEAT AND BACKREST, OPERATOR’S 90 – 38 3J3 SHEAVE, MOUNTINGS, UPPER DRIVE SHAFT 110 – 50
3F11 SEAT HEIGHT ADJUSTER, CAB 90 – 44 4H15 SHEAVE, ROTOR AND STRAW CHOPPER 121 – 74
3F3 SEAT SHROUDS AND TRAINING SEAT 90 – 36 5B15 SHEAVE, SHAFT AND SPROCKET, UPPER
3F13 SEAT, AIR SUSPENSION 90 – 46 CLEAN GRAIN ELEVATOR 130 – 10
3F15 SEAT, AIR SUSPENSION KITS 90 – 48 3I18 SHEAVES, FEEDER HOUSE, UPPER
3F17 SEAT, AIR SUSPENSION KITS 90 – 50 COUNTERSHAFT, VARIABLE DRIVE 110 – 40
3F19 SEAT, AIR SUSPENSION KITS 90 – 52 3D3 SHEET AND DOOR, L H FRONT CORNER 80 – 48
3F21 SEAT, AIR SUSPENSION KITS 90 – 54 3C24 SHEET, FRONT CORNER, R H 80 – 44
1G7 SEAT, AIR, WIRING HARNESS 40 – 18 3D1 SHEET, REAR CORNER, L H 80 – 46
3F7 SEAT, OPERATOR’S SEATBELT 90 – 40 3H23 SHELL, FEEDER HOUSE-CONTOUR MASTER 110 – 20
3F8 SEAT, SEATBELT – TRAINING 90 – 41 3B13 SHELL, SEALS, RADIATOR 80 – 8
3F7 SEATBELT, OPERATOR’S SEAT 90 – 40 3D7 SHIELD ASSEMBLY, FRONT, LEFT SIDE 80 – 52
3F8 SEATBELT, TRAINING SEAT 90 – 41 3D9 SHIELD ASSEMBLY, FRONT, RIGHT SIDE 80 – 54
4G13 SECONDARY COUNTERSHAFT DRIVE 121 – 48 3D11 SHIELD ASSEMBLY, LEFT SIDE 80 – 56
4G13 SECONDARY COUNTERSHAFT DRIVE PULLEY 121 – 48 3D13 SHIELD ASSEMBLY, RIGHT SIDE 80 – 58
1J15 SENSOR, BACKSHAFT SPEED, FEEDER HOUSE 40 – 100 3C19 SHIELD, DRIVE, R H REAR 80 – 38
1E14 SENSOR, ENGINE SPEED 24 – 61 1C21 SHIELD, EXHAUST VALVE 24 – 18
1D22 SENSOR, TEMPERATURE (FIP) 24 – 44 1D18 SHIELD, HEAT, EXHAUST MANIFOLD 24 – 40
1H9 SENSOR, UNLOADING AUGER 40 – 46 3I22 SHIELD, INTAKE 110 – 44
1H13 SENSORS AND BRACKETS, LOW SHAFT SPEED 40 – 50 3C20 SHIELD, R H SERVICE ACCESS 80 – 40
4F7 SEPARATOR AND PUMP DRIVE, ENGINE 4K3 SHIELD, REAR TAILINGS LEFT SIDE 125 – 54
GEARCASE 121 – 18 3C22 SHIELD, SERVICE ACCESS, L H 80 – 42
4F9 SEPARATOR AND PUMP DRIVE, GEARCASE 121 – 20 4K1 SHIELD, TAILINGS UPPER REAR 125 – 52
4F1 SEPARATOR AND UNLOADING DRIVE GEAR, 2F17 SHIELD, TRASH, REAR AXLE 60 – 30
ENGINE GEARCASE 121 – 12 4J24 SHIELD, UPPER TAILINGS AUGER DRIVE 125 – 50
4F3 SEPARATOR DRIVE GEAR, UNLOADING DRIVE 4I15 SHIELDS AND HANDLES, CHAFF SPREADER
AND STRAW CHOPPER, ENGINE GEARCASE 121 – 14 (DUAL MOTOR) 125 – 14
3C11 SEPARATOR DRIVE SIDE SHIELDS 80 – 30 3C15 SHIELDS, AUGER DRIVE (R-H SIDE) 80 – 34
4F5 SEPARATOR DRIVE WET-CLUTCH AND PUMP 4D3 SHIELDS, CLEANING FAN INTAKE 120 – 48
DRIVE SHAFT, GEARCASE 121 – 16 3H19 SHIELDS, CONTOUR MASTER FEEDER HOUSE 110 – 16
4G19 SEPARATOR FAN DRIVE 121 – 54 2C6 SHIELDS, FINAL DRIVE SHAFT 50 – 25
1I4 SEPARATOR FAN DRIVE ADJUSTING MOTOR 40 – 65 2E3 SHIELDS, MUD 50 – 74
3B9 SEPARATOR FRAME 80 – 4 3D5 SHIELDS, MUD (R H SIDE) 80 – 50
5G13 SEPARATOR MODULE SAFETY DECALS 170 – 61 3C17 SHIELDS, MUD AND FAN DRIVE (L H SIDE) 80 – 36
4E11 SEPARATOR TINES, MODULE 120 – 82 4E1 SHIELDS, REAR MODULE 120 – 72
4B8 SEPARATOR/FEEDER HOUSE SEAL, STONE TRAP 3C11 SHIELDS, SIDE, SEPARATOR DRIVE 80 – 30
AND DOOR 120 – 2 5C3 SHIELDS, UPPER CLEAN GRAIN ELEVATOR 130 – 24
3B7 SEPARATOR, MODULE RAILS 80 – 2 2B19 SHIFTER CAM, TRANSMISSION AND
1E21 SEPARATOR, WATER 30 – 4 DIFFERENTIAL 50 – 13
3C22 SERVICE ACCESS SHIELD, L H 80 – 42 2B17 SHIFTER FORKS 50 – 11
3C20 SERVICE ACCESS SHIELD, R H 80 – 40 1C13 SHIM, LINER 24 – 10
1J1 SERVICE KIT, ELECTRICAL CONNECTORS 40 – 86 1I14 SHOE ADJUSTING LIGHT SWITCH 40 – 75
1J3 SERVICE KIT, ELECTRICAL CONNECTORS 40 – 88 4C19 SHOE GRAIN SUPPLY AUGER CLEANOUT DOOR,
1J8 SERVICE OUTLET, ELECTRICAL 40 – 93 HANDLE AND LATCHES 120 – 38
2C12 SERVO CYLINDERS, HYDROSTATIC DRIVE PUMP 50 – 32 4C20 SHOE GRAIN SUPPLY AUGERS AND HOUSING 120 – 40
4J10 SHAFT AND TIGHTENER, LOWER TAILINGS 4C22 SHOE GRAIN SUPPLY AUGERS AND HOUSING 120 – 42
AUGER 125 – 34 1J13 SHOE, CLEANING, LAMP INSTALLATION 40 – 98
4E16 SHAFT, COUPLING AND GEARBOX, MODULE 121 – 2 2E21 SHOES, BRAKE 60 – 10
3J5 SHAFT, DRIVE, FRONT, SHEAVE AND 1C9 SHORT BLOCK 24 – 6
MOUNTINGS (FIXED SPEED WITH REVERSER) 110 – 52 1E7 SHORT BLOCK GASKET KIT 24 – 54
3H11 SHAFT, FRONT WITH REVERSER (VARIABLE) 4C24 SHROUDS AND FANS, CLEANING 120 – 44
9400, 9500 COMBINES 110 – 8 4D1 SHROUDS AND FANS, CLEANING 120 – 46
2C9 SHAFT, HYDROSTATIC DRIVE PUMP 50 – 28 3F3 SHROUDS, SEAT 90 – 36
2C24 SHAFT, OUTER COVER, BEARING AND SEALS 1D22 SHUT-OFF HOUSING SOLENOID (FIP) 24 – 44
CAM LOBE MOTOR 50 – 46 3D21 SIDE AND REAR SEALS, CAB 90 – 6
1C23 SHAFT, ROCKER ARM 24 – 20 1I3 SIDE FINDER LIGHTS, L H AND R H 40 – 64
2C1 SHAFTS, DIFFERENTIAL 50 – 20 3C11 SIDE SHIELDS, SEPARATOR DRIVE 80 – 30
2C7 SHAFTS, FINAL DRIVE 50 – 26 4G15 SIEVE AND CHAFFER DRIVE, CONVEYOR AUGERS 121 – 50
4D23 SHAKER PAN 120 – 68 4D19 SIEVE ELEMENT 120 – 64
4H3 SHEAVE AND CHARGE PUMP MOUNTING, REEL/ 4D21 SIEVE FRAME 120 – 66
BELT PICKUP 121 – 62 4F23 SINGLE RANGE CYLINDER DRIVE 121 – 34
4C15 SHEAVE AND GEARCASE, BEATER 120 – 34 2I22 SIX STACK SOLENOID CONTROL VALVE MODULE
5B24 SHEAVE AND GEARCASE, CLEAN GRAIN ASSEMBLY & MOUNTINGS 70 – 58
ELEVATOR 130 – 20 2E23 SLAVE CYLINDER, BRAKE 60 – 12
4G23 SHEAVE LINKAGE, FAN DRIVE SPEED CONTROL 121 – 58 3I16 SLIP CLUTCH,FEEDER HOUSE 110 – 38
10-24 CTS II COMBINE PC2752 (30-MAY-00)
PN=24
1B1
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
4F21 SLOW SPEED CYLINDER DRIVE 121 – 32 2G7 STEERING TIE RODS, FIXED REAR AXLE
1F3 SOLDENOID, ETHERSTART 30 – 10 GRAIN 60 – 46
2I16 SOLENOID CONTROL VALVE BI-DIRECTIONAL 2G3 STEERING TIE RODS, FIXED REAR AXLE,
MODULE, REEL LIFT AND CYLINDER SPEED 70 – 52 4-WHEEL DRIVE – GRAIN 60 – 42
2J20 SOLENOID CONTROL VALVE BRACKETS 70 – 81 3B21 STEP AND PLATFORM, ENGINE ACCESS 80 – 16
2I19 SOLENOID CONTROL VALVE FOR AUGER SWING 70 – 55 3B19 STEP, AIR DUCT, ENGINE COMPARTMENT 80 – 14
2I20 SOLENOID CONTROL VALVE MODULE ASSEMBLY 4B8 STONE TRAP, DOOR AND SEAL, SEPARATOR/
AND MOUNTINGS 70 – 56 FEEDER HOUSE 120 – 2
2I22 SOLENOID CONTROL VALVE MODULE, 6 STACK 3C7 STOP AND REAR HOOD ACCESS DOOR 80 – 26
ASSEMBLY & MOUNTINGS 70 – 58 1E15 STRAP, ALTERNATOR ADJUSTING 24 – 62
2I14 SOLENOID CONTROL VALVE UNBALANCED LOAD 1C25 STRAPS, ENGINE LIFT 24 – 22
MODULE (HEADER LIFT MODULE) 70 – 50 5E5 STRAW CHOPPER BELTS 170 – 4
2I18 SOLENOID CONTROL VALVE UNLOAD MODULE, 4H7 STRAW CHOPPER DECK, SUPPORTS AND FINS 121 – 66
RELIEF VALVE 70 – 54 4H5 STRAW CHOPPER DRIVES 121 – 64
2J19 SOLENOID CONTROL VALVE, ENGINE GEARCASE, 4H17 STRAW CHOPPER HOUSING AND KNIFEBANK 121 – 76
PRESSURE REGULATOR 70 – 80 4H19 STRAW CHOPPER HOUSING AND KNIFEBANK 121 – 78
2D12 SOLENOID, CONTROL VALVE 50 – 59 4H23 STRAW CHOPPER LOWER DOOR 121 – 82
1D22 SOLENOID, FUEL SHUT-OFF (FIP) 24 – 44 4H13 STRAW CHOPPER ROTOR, FINE CUT (PADDLED
5D23 SOLENOID, MAIN VALVE BLOCK NARROW (670401- ) 121 – 72
DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 3 4H11 STRAW CHOPPER ROTOR, FINE CUT (STRAIGHT
1D22 SOLENOID, SHUT-OFF HOUSING (FIP) 24 – 44 NARROW (670401- ) 121 – 70
2H22 SOLENOID, VALVE, HEADER HEIGHT CONTROL 70 – 35 4H21 STRAW CHOPPER UPPER REAR DOOR 121 – 80
3D19 SOUND DEADENING, FOAM AND SEALS, CAB 90 – 4 4H15 STRAW CHOPPER, ROTOR AND SHEAVE 121 – 74
2B16 SPACERS, AXLE 50 – 10 4H9 STRAW CHOPPER, TRI ROTOR 121 – 68
1G16 SPEAKERS, ANTENNA AND RADIO 40 – 28 4F3 STRAW CHOPPER, UNLOADING DRIVE AND
4G21 SPEED CONTROL LINKAGE, FAN DRIVE 121 – 56 SEPARATOR DRIVE GEAR, ENGINE GEARCASE 121 – 14
4G23 SPEED CONTROL, FAN DRIVE SHEAVE LINKAGE 121 – 58 4I3 STRAW SPREADER 125 – 2
1G22 SPEED SENSOR, TRANSMISSION 40 – 34 4I11 STRAW SPREADER DOOR 125 – 10
1G24 SPEED SENSOR, TRANSMISSION 40 – 36 4I5 STRAW SPREADER DRIVES 125 – 4
4B22 SPIKE TOOTH CONCAVE 120 – 16 4I9 STRAW SPREADER FRAME AND LOWER CURTAIN 125 – 8
4B24 SPIKE TOOTH INDICATOR 120 – 18 4C7 STRIPPER BEATER 120 – 26
4B18 SPIKE TOOTH THRESHING CYLINDER 120 – 12 4C5 STRIPPER BEATER DRIVE IDLER 120 – 24
4B20 SPIKE-TOOTH CONCAVE 120 – 14 1J7 SUPPLEMENTARY TERMINALS AND CONNECTORS 40 – 92
2F24 SPINDLE HOUSING, REAR AXLE 60 – 38 5C13 SUPPORT AND ANGLES, GRAIN TANK EXTENSION
2F25 SPINDLE HOUSING, REAR AXLE S 130 – 34
GRAIN 60 – 39 3E5 SUPPORT AND FRAME, CAB 90 – 14
2G1 SPINDLES, REAR AXLE 60 – 40 2E24 SUPPORT BRACKET, BRAKE CABLE 60 – 13
4I7 SPREADER CURTAIN, UPPER 125 – 6 1E13 SUPPORT, AIR CONDITIONER COMPRESSOR 24 – 60
4I9 SPREADER FRAME, STRAW AND LOWER CURTAIN 125 – 8 1E15 SUPPORT, ALTERNATOR 24 – 62
2G20 SPREADER MOTOR, CHAFF (EATON) 70 – 8 1I17 SUPPORT, ELECTRONIC CONTROL UNIT
4I3 SPREADER, STRAW 125 – 2 MOUNTING (SN -XXXXXX) 40 – 78
5E5 SPREADER, STRAW, BELTS 170 – 4 4J17 SUPPORT, LOWER TROUGH AND TAILINGS
5B15 SPROCKET, SHEAVE AND SHAFT, UPPER DRIVE BRACKET 125 – 41
CLEAN GRAIN ELEVATOR 130 – 10 4I19 SUPPORT, MOUNTING, CHAFF SPREADER 125 – 18
4J16 SPROCKETS, BEARINGS AND CHAIN, TAILINGS 2F23 SUPPORT, REAR AXLE 60 – 36
ELEVATOR CONVEYOR 125 – 40 3C5 SUPPORTS AND MOUNTING TRACKS, MODULE 80 – 24
1E11 STARTER 24 – 58 3E7 SUPPORTS AND ROOF, CAB 90 – 16
1C18 STARTER GEAR 24 – 15 4F19 SUPPORTS AND VARIABLE SHEAVE, PRIMARY
1E11 STARTER SWITCH 24 – 58 COUNTERSHAFT 121 – 30
1E11 STARTER WIRING HARNES 24 – 58 1E19 SUPPORTS, FUEL TANK 30 – 2
1F3 STARTING AID, COLD WEATHER 30 – 10 3I18 SUPPORTS, UPPER COUNTERSHAFT, FEEDER
1D19 STARTING FITTINGS, ETHER 24 – 41 HOUSE, VARIABLE DRIVE 110 – 40
2D9 STEERING ARM 50 – 56 2C12 SWASHPLATE, HYDROSTATIC DRIVE PUMP 50 – 32
2F9 STEERING COLUMN (LOWER) 60 – 22 5C23 SWITCH AND HUB SUPPORT, HORIZONTAL
2F7 STEERING COLUMN (UPPER) 60 – 20 UNLOADING AUGER 130 – 44
3G6 STEERING COLUMN (UPPER) 90 – 64 1G9 SWITCH, AIR CONDITIONER 40 – 20
1G5 STEERING COLUMN WIRING HARNESS 40 – 16 1F17 SWITCH, AUX FIELD LIGHTS, OPTIONAL 40 – 4
3G8 STEERING COLUMN, LOWER 90 – 66 1G9 SWITCH, HEATER 40 – 20
2F19 STEERING CYLINDER 60 – 32 5C24 SWITCH, HORIZONTAL UNLOADING AUGER 130 – 45
2F20 STEERING CYLINDER KIT 60 – 33 2B8 SWITCH, HYDROSTATIC DRIVE LEVER AND CABL
2F3 STEERING HOSES AND LINES, FRONT 60 – 16 E 50 – 2
2F5 STEERING HOSES, UPPER 60 – 18 1H21 SWITCH, INLET AIR TEMPERATURE 40 – 58
2F11 STEERING LINES AND HOSES, REAR 60 – 24 1I14 SWITCH, LIGHT, SHOE ADJUSTING 40 – 75
2F13 STEERING LINES, L H 60 – 26 1H23 SWITCH, LIMIT, GRAIN TANK 40 – 60
2F15 STEERING LINES, R H SIDE 60 – 28 1H1 SWITCH, PARK BRAKE 40 – 38
2F1 STEERING PUMP 60 – 14 1E11 SWITCH, STARTER 24 – 58
2G5 STEERING TIE RODS, ADJUSTABLE REAR AXLE 60 – 44
CTS II COMBINE PC2752 (30-MAY-00) 10-25
PN=25
1B2
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1H19 SWITCH, WARNING, ENGINE PLUGGED AIR FILT 5G12 TOP DECALS 170 – 60
ER 40 – 56 1C5 TORQ-GARD PLUS-50, ENGINE OIL 24 – 1
5C21 SWIVEL SUPPORT AND BRACES, AUGER 130 – 42 3F3 TRAINING SEAT 90 – 36
5C19 SWIVEL, HORIZONTAL UNLOADING AUGER 130 – 40 3F8 TRAINING SEAT SEATBELT 90 – 41
1D25 TRANSFER PUMP, FUEL (ROBERT BOSCH) 24 – 47
5B17 TRANSITION, AUGER HOUSING 130 – 12
T 2B18 TRANSMISSION 50 – 12
2B19 TRANSMISSION AND DIFFERENTIAL
1F19 TACHOMETER 40 – 6 HOUSING COVER AND SHIFTER CAM 50 – 13
3E21 TACHOMETER 90 – 30 2B17 TRANSMISSION AND DIFFERENTIAL HOUSING
1F22 TAIL LIGHTS 40 – 9 AND SHIFTER FORKS 50 – 11
4J17 TAILINGS DRIVE BRACKET AND LOWER 2B22 TRANSMISSION INPUT SHAFT, GEARS, LUBE
TROUGH SUPPORT 125 – 41 PUMP AND BEARINGS 50 – 16
4J16 TAILINGS ELEVATOR CONVEYOR CHAIN, 2B24 TRANSMISSION PINION SHAFT, GEARS AND
SPROCKETS AND BEARINGS 125 – 40 BEARINGS 50 – 18
4J14 TAILINGS ELEVATOR HOUSING 125 – 38 1G22 TRANSMISSION SPEED SENSOR 40 – 34
4K3 TAILINGS SHIELD, REAR LEFT SIDE 125 – 54 1G24 TRANSMISSION SPEED SENSOR 40 – 36
4K1 TAILINGS SHIELD, UPPER REAR 125 – 52 1J21 TRANSPORT WARNING LIGHTS 40 – 106
3C9 TAILLIGHT WIRING HARNESS 80 – 28 2F17 TRASH SHIELD, REAR AXLE 60 – 30
5C7 TANK BASE, GRAIN 130 – 28 4H9 TRI ROTOR STRAW CHOPPER 121 – 68
5D11 TANK CROSS AUGERS, GRAIN 130 – 58 3D23 TRIM PANELS, CAB INTERIOR 90 – 8
1E23 TANK FUEL LINES AND FITTINGS 30 – 6 4J17 TROUGH SUPPORT, LOWER AND TAILINGS
1F9 TANK, COOLANT RECOVERY 30 – 16 DRIVE BRACKET 125 – 41
1E19 TANK, FUEL 30 – 2 5D17 TROUGH, GRAIN TANKSAMPLING 130 – 66
5C11 TANK, GRAIN, EXTENSIONS 130 – 32 4J12 TROUGH, LOWER TAILINGS AUGER 125 – 36
5D17 TANK, GRAIN, SAMPLING TROUGH 130 – 66 1D10 TUBE SEAL 24 – 32
5C5 TANK, GRAIN, TOP 130 – 26 1D15 TUBE, ENGINE OIL DIPSTICK 24 – 37
1F19 TEMPERATURE GAUGE, ENGINE 40 – 6 1D12 TUBE, THERMOSTAT HOUSING 24 – 34
3E21 TEMPERATURE GAUGE, ENGINE 90 – 30 1D5 TUBES, OIL COOLER 24 – 27
1D22 TEMPERATURE SENSOR (FIP) 24 – 44 1D4 TUBES, OIL COOLER BYPASS 24 – 26
1H21 TEMPERATURE SWITCH, INLET AIR 40 – 58 1D16 TURBOCHARGER 24 – 38
1E15 TENSIONER, BELT (ALT ) 24 – 62 1D16 TURBOCHARGER GASKET 24 – 38
1J5 TERMINAL AND WIRING KIT 40 – 90 1D16 TURBOCHARGER OIL LINES 24 – 38
1J7 TERMINALS AND CONNECTORS, SUPPLEMENTARY 40 – 92 1F22 TURN LIGHTS 40 – 9
1E5 TERMINALS, ELECTRICAL, WEATHERPACK 24 – 52
1I23 TERMINALS, WEATHERPACK 40 – 84
1D12 THERMOSTAT 24 – 34 U
1D12 THERMOSTAT COVER 24 – 34
1D12 THERMOSTAT GASKET 24 – 34 1C15 UNDERSIZE CRANKSHAFT KIT
1D12 THERMOSTAT HOUSING, FRONT 24 – 34 (CONNECTING ROD JOURNAL) 24 – 12
4B7 THRESHING CYLINDER COVER 120 – 1 1E17 UNDERSIZE MAIN BEARING CRANKSHAFT AND
4B12 THRESHING CYLINDER, RASP BAR 120 – 6 BEARING KIT 24 – 64
4B18 THRESHING CYLINDER, SPIKE TOOTH 120 – 12 2I18 UNLOAD MODULE, RELIEF VALVE, SOLENOID
1C16 THRUST BEARING 24 – 13 CONTROL VALVE 70 – 54
1C16 THRUST WASHER 24 – 13 4F1 UNLOADING AND SEPARATOR DRIVE GEAR,
2G5 TIE RODS, STEERING, ADJUSTABLE REAR AXLE 60 – 44 ENGINE GEARCASE 121 – 12
2G7 TIE RODS, STEERING, FIXED REAR AXLE 5E5 UNLOADING AUGER BELTS 170 – 4
GRAIN 60 – 46 5D14 UNLOADING AUGER COUNTERSHAFT DRIVE 130 – 62
2G3 TIE RODS, STEERING, 4-WHEEL DRIVE FIXED 5D16 UNLOADING AUGER DRIVE BELT GUIDE 130 – 64
REAR AXLE – GRAIN 60 – 42 5D1 UNLOADING AUGER HOUSING, HORIZONTAL
4J10 TIGHTENER AND SHAFT, LOWER TAILINGS (14- AND 17-FT ) 130 – 48
AUGER 125 – 34 5D3 UNLOADING AUGER HOUSING, HORIZONTAL
4G5 TIGHTENER, CYLINDER DRIVE, DUAL-RANGE 121 – 40 (17- AND 20-FT ) 130 – 50
4J23 TIGHTENER, DRIVE CHAIN, UPPER TAILINGS 125 – 48 5D5 UNLOADING AUGER HOUSING, HORIZONTAL
3H13 TIGHTENER, DRIVE, VARIABLE SPEED 110 – 10 (17- AND 20-FT ) 130 – 52
4H1 TIGHTENER, FEEDER HOUSE DRIVE 121 – 60 1I1 UNLOADING AUGER LIGHT, GRAIN TANK 40 – 62
3I12 TIGHTENER, GUIDES AND FEEDER CONVEYOR 5D19 UNLOADING AUGER LUBE BANK 130 – 68
DRIVE CHAIN 110 – 34 1H9 UNLOADING AUGER SENSOR AND WIRING
3I1 TILT BEAM, FEEDER HOUSE, CONTOUR MASTER 110 – 22 HARNESS 40 – 46
2J9 TILT CYLINDER – CONTOUR MASTER 70 – 70 2J7 UNLOADING AUGER SWING HYDRAULIC CYLINDER 70 – 68
2J10 TILT CYLINDER HOSES AND FITTINGS – 2J3 UNLOADING AUGER SWING HYDRAULIC CYLINDER
CONTOUR MASTER 70 – 71 LINES AND HOSES 70 – 64
1C19 TIMING GEAR COVER 24 – 16 2J7 UNLOADING AUGER SWING HYDRAULIC MOUNTING 70 – 68
1C19 TIMING GEAR COVER GASKET 24 – 16 2J5 UNLOADING DRIVE CYLINDER, GRAIN TANK 70 – 66
3B7 TINE SEPARATOR MODULE RAILS 80 – 2 4F3 UNLOADING DRIVE, STRAW CHOPPER AND
4E11 TINE SEPARATORS, MODULE 120 – 82 SEPARATOR DRIVE GEAR, ENGINE GEARCASE 121 – 14
3E13 TOOL BOX 90 – 22 5E6 UNLOADING SYSTEM BELTS 170 – 5
10-26 CTS II COMBINE PC2752 (30-MAY-00)
PN=26
1B3
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
5B13 UPPER CLEAN GRAIN ELEVATOR 130 – 8 4F19 VARIABLE SHEAVE AND SUPPORTS, PRIMARY
5B15 UPPER CLEAN GRAIN ELEVATOR SHAFT, COUNTERSHAFT 121 – 30
SPROCKET AND SHEAVE 130 – 10 3H13 VARIABLE SPEED DRIVE TIGHTENER 110 – 10
5C3 UPPER CLEAN GRAIN ELEVATOR SHIELDS 130 – 24 3I18 VARIBLE DRIVE, FEEDER HOUSE, UPPER
5B17 UPPER CLEAN GRAIN LOADING AUGER HOUSING 130 – 12 COUNTERSHAFT SUPPORTS 110 – 40
5B19 UPPER CLEAN GRAIN LOADING AUGER HOUSING 130 – 14 5C15 VERTICAL AUGER LOWER GEAR CASE 130 – 36
3J3 UPPER DRIVE SHAFT FIXED SPEED WITH 5C17 VERTICAL UNLOADING AUGER AND CHARGE
REVERSER 110 – 50 HOUSING 130 – 38
1J11 UPPER HARNESS CONNECTORS FOR 6076 ENGINE 40 – 96 1I6 VOLTAGE REGULATOR, ALTERNATOR – BOSCH 40 – 67
1H15 UPPER HARNESS FOR 6076 ENGINE 40 – 52
2D19 UPPER HYDROSTATIC DRIVE HOSES
(FOUR WHEEL DRIVE) 50 – 66 W
4H21 UPPER REAR DOOR, STRAW CHOPPER 121 – 80
4K1 UPPER REAR TAILINGS SHIELD 125 – 52 5E3 WALKER BELTS 170 – 2
2I8 UPPER RETURN LINES AND HOSES, HYDRAULIC 1J21 WARNING LIGHTS, TRANSPORT 40 – 106
RESERVOIR 70 – 44 1H19 WARNING SWITCH,ENGINE PLUGGED AIR FILTER 40 – 56
3I6 UPPER SHAFT, FEEDER HOUSE 110 – 28 1C16 WASHER, THRUST 24 – 13
4I7 UPPER SPREADER CURTAIN 125 – 6 1G14 WASHER, WINDSHIELD 40 – 26
2F7 UPPER STEERING COLUMN 60 – 20 1D12 WATER MANIFOLD GASKET 24 – 34
3G6 UPPER STEERING COLUMN 90 – 64 1D12 WATER MANIFOLD, FRONT 24 – 34
5E6 UPPER TAILINGS AUGER BELT 170 – 5 1D10 WATER PUMP 24 – 32
4J24 UPPER TAILINGS AUGER DRIVE 125 – 50 1D10 WATER PUMP GASKET 24 – 32
4J21 UPPER TAILINGS AUGER HOUSING AND PADDLE 1D10 WATER PUMP O-RING 24 – 32
ASSEMBLY 125 – 46 1D10 WATER PUMP OIL SEAL 24 – 32
4J24 UPPER TAILINGS AUGER, DRIVE AND SHIELD 125 – 50 1D10 WATER PUMP RETAINING RING 24 – 32
4J23 UPPER TAILINGS DRIVE CHAIN TIGHTENER 125 – 48 1D10 WATER PUMP SEAL KIT 24 – 32
1E21 WATER SEPARATOR 30 – 4
3H23 WEAR PLATES, FEEDER HOUSE – CONTOUR
V MASTER 110 – 20
1E5 WEATHERPACK CONNECTORS 24 – 52
5D22 VALVE BLOCK AND HYDRAULIC LINE, 1I23 WEATHERPACK CONNECTORS AND TERMINALS 40 – 84
DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 2 1E5 WEATHERPACK TERMINALS 24 – 52
2I22 VALVE MODULE, SIX STACK SOLENOID CONTROL 1I23 WEATHERPACK TERMINALS AND CONNECTORS 40 – 84
ASSEMBLY & MOUNTINGS 70 – 58 2G8 WEIGHTS, WHEELS, REAR 60 – 48
1C21 VALVE SEAT INSERTS 24 – 18 2J11 WET CLUTCH OIL COOLER LINES AND HOSES 70 – 72
2I18 VALVE SOLENOID CONTROL UNLOAD MODULE 70 – 54 2B13 WHEEL, HIGH FLOATATION DRIVE
2D11 VALVE, CONTROL 50 – 58 PLANETARY FINAL DRIVE 50 – 7
2D12 VALVE, CONTROL, SOLENOID 50 – 59 2B12 WHEELS, DRIVE 50 – 6
1E3 VALVE, FUEL CHECK 24 – 50 2G10 WHEELS, REAR 60 – 50
2C22 VALVE, HYDROSTATIC MOTOR 50 – 43 2G8 WHEELS, REAR AND WHEEL WEIGHTS 60 – 48
1D6 VALVE, OIL FILTER BYPASS 24 – 28 2B14 WIDE-SPACED DUAL WHEELS
1D8 VALVE, OIL PAN DRAIN 24 – 30 (PLANETARY FINAL DRIVE) 50 – 8
1D5 VALVE, OIL PRESSURE REGULATING 24 – 27 3C13 WINDROW ATTACHMENT 80 – 32
1D6 VALVE, OIL PRESSURE REGULATING 24 – 28 1G14 WINDSHIELD WASHER 40 – 26
4J4 VALVE, PUMP, LINES AND HOSES, CHAFF 1G10 WINDSHIELD WIPER (LONG) 40 – 22
SPREADER 125 – 28 1G12 WINDSHIELD WIPER, (SHORT) 40 – 24
2G18 VALVE, REEL DRIVE FLOW CONTROL 70 – 6 4I17 WINGS, SEALS AND PAN, CHAFF SPREADER
2I18 VALVE, RELIEF, SOLENOID CONTROL VALVE (DUAL MOTOR) 125 – 16
UNLOAD MODULE 70 – 54 1G10 WIPER, WINDSHIELD (LONG) 40 – 22
2I20 VALVE, SOLENOID CONTROL MODULE ASSEMBLY 1G12 WIPER, WINDSHIELD (SHORT) 40 – 24
AND MOUNTINGS 70 – 56 1J5 WIRING AND TERMINAL KIT 40 – 90
2I18 VALVE, SOLENOID CONTROL RELIEF – CONTOUR 1H1 WIRING HARNESS ADAPTER (CONTOUR MASTER) 40 – 38
MASTER 70 – 54 1H3 WIRING HARNESS ADAPTER (CONTOUR MASTER) 40 – 40
2I16 VALVE, SOLENOID CONTROL, CYLINDER SPEED 1G7 WIRING HARNESS, A/C, HEATER AND AIR SEAT 40 – 18
AND REEL LIFT BI-DIRECTIONAL MODULE 70 – 52 1G1 WIRING HARNESS, ARMREST 40 – 12
2I14 VALVE, SOLENOID CONTROL, HEADER LIFT 1F15 WIRING HARNESS, CAB 40 – 2
MODULE 70 – 50 1H23 WIRING HARNESS, GRAIN TANK 40 – 60
2H22 VALVE, SOLENOID, DIAL-A-MATIC 1H11 WIRING HARNESS, HARVESTRAK MONITOR 40 – 48
HEADER HEIGHT CONTROL 70 – 35 1H5 WIRING HARNESS, L H AND R H REAR 40 – 42
1C21 VALVES, EXHAUST 24 – 18 1H1 WIRING HARNESS, MAIN, L H CENTER 40 – 38
1C21 VALVES, INTAKE 24 – 18 1H3 WIRING HARNESS, MAIN, L H CENTER 40 – 40
2G22 VARIABLE DRIVE HYDRAULIC HOSE, FEEDER 1H5 WIRING HARNESS, MODULE 40 – 42
HOUSE 70 – 10 1H7 WIRING HARNESS, R H MAIN 40 – 44
3I18 VARIABLE DRIVE, FEEDER HOUSE, UPPER 1H5 WIRING HARNESS, REAR HOOD 40 – 42
COUNTERSHAFT 110 – 40 1E11 WIRING HARNESS, STARTER 24 – 58
3H11 VARIABLE FRONT SHAFT WITH REVERSER 1G5 WIRING HARNESS, STEERING COLUMN 40 – 16
9400, 9500 COMBINES 110 – 8 3C9 WIRING HARNESS, TAILLIGHT 80 – 28
CTS II COMBINE PC2752 (30-MAY-00) 10-27
PN=27
1B4
CTS II COMBINE
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1H9 WIRING HARNESS, UNLOADING AUGER 40 – 46
1G22 WIRING HARNESS,L H MAIN, L H FRONT 40 – 34
1G24 WIRING HARNESS,L H MAIN, L H FRONT 40 – 36
2G24 WITH OUT DUST SUPPRESSION, OIL COOLER LU
BE PUMP 70 – 12
Y
2D7 YOKE, PIVOTS AND CAPS 50 – 54

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

https://vimeo.com/743634399

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

I.G