Kobelco SK60 Hydraulic Excavator S5LE0005E Shop Manual PDF

Description

Kobelco SK60 Hydraulic Excavator S5LE0005E Shop Manual – PDF DOWNLOAD

FILE DETAILS:

Kobelco SK60 Hydraulic Excavator S5LE0005E Shop Manual – PDF DOWNLOAD

Language : English
Pages :782
Downloadable : Yes
File Type : PDF

IMAGES OF THE MANUAL:

TABLE OF CONTENTS:

Kobelco SK60 Hydraulic Excavator S5LE0005E Shop Manual – PDF DOWNLOAD

1. SPECIFICATION
2. OPERATION AND CONTROLS (Refer to Operators Manual)
3. LOCATION AND WEIGHT OF COMPONENTS
4. MAINTENANCE STANDARDS AND
TEST PROCEDURES
5. TROUBLESHOOTING
6. PREVENTIVE MAINTENANCE (Refer to Operators Manual)
7. WORKING STANDARDS

DESCRIPTION:

Kobelco SK60 Hydraulic Excavator S5LE0005E Shop Manual – PDF DOWNLOAD

SAFETY:

1. Read and understand all Warning plates and decals on the machine before operating, lubricating or repairing this product.
2. Always wear protective glasses and protective shoes when working around machines. In particular, wear protective glasses when pounding on any part of the machine or its attachments with a hammer or sledge. Use welders gloves, hood/goggles, apron and other protective clothing appropriate to the welding job being performed. Do not wear loose-fitting or torn clothing. Remove all rings from fingers when working on machinery.
3. Disconnect battery and
discharge any capacitors before starting to work on machine. Hang “Do Not Operate” tag in the Operator’s Compartment.
4. If possible, make all repairs with the machine parked on a level, hard surface. Block machine so it does not roll while working on or under machine.
5. Do not work on any machine that is supported only by lift jacks or a hoist. Always use blocks or jack stands to support the machine before performing any disassembly.

GENERAL:

1) The terms used in this Maintenance Standards shall have definitions as follows:
Standard value:
Standard values for adjustment or assembly of a new machine, provided the values are for standard specifications (machine with standard attachments and shoes) unless otherwise specified.
Allowable value:
A limit value that shall not be exceeded. If it is exceeded, remedy or replacement is required. Avoid using a machine, exceeding this value to maintain the performance or safety of the machine.
Limit value of use:
A value at which machine adjustment or parts replacement becomes unnecessary if it is exceeded. If the machine is still used beyond the limit value, the machine will be faced with failures leading to the out-of operation and will develop safety problems.
Oil temperature:
Temperature to be applied. The temperature of hydraulic oil refers to that in the hydraulic oil tank. Hydraulic oil must be circulated continuously so that the oil temperature in the circuits may be leveled off with that of the tank. 2) For items without allowable values, adjust and repair or replace them with reference to the standard values.
3) Rubber products such as hydraulic hoses, O rings and oil seals deteriorate with time. Replace them regularly or at overhaul. 4) It is advisable that important hoses for safety purpose be designated as very important parts (V.I.P.) and be replaced regularly.
5) In proceeding to maintenance, it is essential to get familiar with machine operating procedures, precautions to be observed and inspection / lubrication procedures. Read through the Operators Manual as well.

KOBELCO SK60 HYDRAULIC EXCAVATOR S5LE0005E SHOP MANUAL PDF:

G.B 05/12/24