Description
Komatsu 4D130-1 Series Diesel Engine Shop Manual SEBE6114Z00 – PDF DOWNLOAD
FILE DETAILS:
Komatsu 4D130-1 Series Diesel Engine Shop Manual SEBE6114Z00 – PDF DOWNLOAD
Language : English
Pages : 220
Downloadable : Yes
File Type : PDF
TABLE OF CONTENTS:
Komatsu 4D130-1 Series Diesel Engine Shop Manual SEBE6114Z00 – PDF DOWNLOAD
COVER 1
CONTENTS 2
01 GENERAL 32
GENERAL ASSEMBLY DRAWING 33
SPECIFICATIONS 37
ENGINE PERFORMANCE CURVE 38
WEIGHT TABLE 39
11 STRUCTURE AND FUNCTION 40
GENERAL STRUCTURE 41
INTAKE AND EXHAUST UNIT 43
CYLINDER HEAD 44
CYLINDER BLOCK 47
TIMING GEAR 49
PISTON AND CONNECTING ROD 51
FLYWHEEL 52
BALANCER SHAFT 53
OIL PUMP 54
REGULATOR VALVE 55
OIL FITER(CARTRIDGE TYPE) 56
OIL COOLER 57
FUEL SYSTEM 58
FUEL INJECTION PUMP 59
GOVERNOR 63
FEED PUMP 67
INJECTION PUMP DRIVE CASE 69
FUEL INJECTION NOZZLE 70
FUEL FILTER(CARTRIDGE TYPE) 71
COOLING SYSTEM 72
WATER PUMP 73
THERMOSTAT 74
RADIATOR 75
CORROSION RESISTOR 76
ELECTRICAL SYSTEM 77
ALTERNATOR 78
STARTING MOTOR 79
12 TESTING AND ADJUSTING 80
GENERAL INSTRUCTION FOR TESTING AND ADJUSTING 81
INTAKE AND EXHAUST SYSTEM 82
ENGINE BODY 86
LUBRICATION SYSTEM 88
FUEL SYSTEM 91
COOLING SYSTEM 108
PERFORMANCE TEST 111
RUN-IN STANDARD 114
PERFORMANCE TEST STANDARD TABLE 114
STANDARD FOR TESTING AND ADJUSTING 115
TOOLS FOR TESTING AND ADJUSTING 116
13 DISASSEMBLY AND ASSEMBLY 117
DISASSEMBLY 118
ASSEMBLY 142
14 MAINTENANCE STANDARD 180
CYLINDER HEAD,PRECOMBUSTION CHAMBER 181
VALVE,VALVE GUIDE 182
ROCKER ARM,TAPPET 183
CYLINDER BLOCK 184
CYLINDER LINER 185
CRANKSHAFT 186
CAMSHAFT 187
TIMING GEAR 188
PISTON,PISTON RING,PISTON PIN 189
CONNECTING ROD 190
FLYWHEEL,FLYWHEEL HOUSING 191
OIL PUMP 192
REGULATOR VALVE,SAFETY VALVE 193
FUEL INJECTION PUMP 194
GOVERNOR 196
FEED PUMP 197
WATER PUMP,THERMOSTAT 198
15 REPAIR AND REPLACEMENT 199
CYLINDER HEAD SECTION 200
CYLINDER BLOCK SECTION 205
DESCRIPTION:
Komatsu 4D130-1 Series Diesel Engine Shop Manual SEBE6114Z00 – PDF DOWNLOAD
GENERAL PRECAUTIONS :
Mistakes in operation are extremely dangerous. Read the OPERATION & MAINTENANCE MANUAL carefully BEFORE operating the machine.
1. Before carrying out any greasing or repairs, read all the precautions given on the decals which are fixed to the machine.
2. When carrying out any operation, always wear safety shoes and helmet. Do not wear loose work clothes, or clothes with buttons missing.
● Always wear safety glasses when hitting parts with a hammer.
● Always wear safety glasses when grinding parts with a grinder, etc.
3. If welding repairs are needed, always have a trained, experienced welder carry out the work. When carrying out welding work, always wear welding gloves, apron, glasses, cap and other clothes suited for welding work.
4. When carrying out any operation with two or more workers, always agree on the operating procedure before starting. Always inform your fellow workers before starting any step of the operation. Before starting work, hang UNDER REPAIR signs on the controls in the operator’s compartment.
5. Keep all tools in good condition and learn the correct way to use them.
6. Decide a place in the repair workshop to keep tools and removed parts. Always keep the tools and parts in their correct places. Always keep the work area clean and make sure that there is no dirt or oil on the floor. Smoke only in the areas provided for smoking. Never smoke while working.
PREPARATIONS FOR WORK:
7. Before adding oil or making repairs, park the machine on hard, level ground, and block the wheels or tracks to prevent the machine from moving.
8. Before starting work, lower blade, ripper, bucket or any other work equipment to the ground. If this is not possible, insert the safety pin or use blocks to prevent the work equipment from falling. In addition, be sure to lock all the control levers and hang warning signs on them.
9. When disassembling or assembling, support the machine with blocks, jacks or stands before starting work.
10. Remove all mud and oil from the steps or other places used to get on and off the machine. Always use the handrails, ladders or steps when getting on or off the machine. Never jump on or off the machine. If it is impossible to use the handrails, ladders or steps, use a stand to provide safe footing.
PRECAUTIONS DURING WORK :
11. When removing the oil filler cap, drain plug or hydraulic pressure measuring plugs, loosen them slowly to prevent the oil from spurting out. Before disconnecting or removing components of the oil, water or air circuits, first remove the pressure completely from the circuit.
12. The water and oil in the circuits are hot when the engine is stopped, so be careful not to get burned. Wait for the oil and water to cool before carrying out any work on the oil or water circuits.
13. Before starting work, remove the leads from the battery. ALWAYS remove the lead from the negative (-) terminal first.
IMAGES PREVIEW OF THE MANUAL:
S.V 22/12/24
