Komatsu FB16H-1E FB20H-1E FB25H-1E FB30H-1E FB16GH-1E FB20GH-1E FB25GH-1E Shop Manual PDF

Description

Komatsu FB16H-1E FB20H-1E FB25H-1E FB30H-1E FB16GH-1E FB20GH-1E FB25GH-1E Electric Lift Truck Shop Manual – PDF DOWNLOAD

FILE DETAILS:

Komatsu FB16H-1E FB20H-1E FB25H-1E FB30H-1E FB16GH-1E FB20GH-1E FB25GH-1E Electric Lift Truck Shop Manual – PDF DOWNLOAD

Language : English
Pages : 81
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Komatsu FB16H-1E FB20H-1E FB25H-1E FB30H-1E FB16GH-1E FB20GH-1E FB25GH-1E Electric Lift Truck Shop Manual – PDF DOWNLOAD

Section 00
General information about the vehicle and normal handling-
Section 01
Chassis and body–
Section 02
Steering system
Section 03
Power unit
Section 04
Transmission and gear unit-
Section 05
Brake system—
Section 06
Electrical system
Section 07
Hydraulic system
Section 08
Mast and lift cylinders-

DESCRIPTION:

Komatsu FB16H-1E FB20H-1E FB25H-1E FB30H-1E FB16GH-1E FB20GH-1E FB25GH-1E Electric Lift Truck Shop Manual – PDF DOWNLOAD

SAFETY REQULATIONS:

General points
When carrying out any work on the equipment:
Park the stacker on firm, even ground.
Pull on the parking brake and if necessary secure the wheels with wedges.
If no battery voltage is required for the work, disconnect the battery plug.
Disconnect the battery plug during any welding work.
When working with lifting equipment (cranes, vehicle jacks, pit lifts), never walk or reach under suspended loads. Use only load bearing equipment that is in perfect condition (ropes, chains, jacks).
Replace any seal that has been removed.
Use a torque wrench to tighten any screwed connections with specified torques.
Clean all removed and dismantled parts and examine for damage.
Always renew safety elements (split-pins, lock rings/plates). Apply grease/oil to moving parts when they are fitted. If there are lubricating nipples, inject grease until it emerges. Use only the operating media specified (oils, greases, brake fluid).
After repairs are completed, carry out a function test. Check the foot brake and the parking brake. Inspect the brake. system, the hydraulic system and the gear unit for leaks; check oil levels and top up if necessary. Find out the reasons for any loss of liquid.
Additional points when working on the hydraulic system:
Before working on the hydraulic system, lower the fork tines. to the floor and tilt the mast to the front. After removing the battery plug, depressurize the hydraulic system by activating any function.
Utmost cleanliness is essential when working with components of the hydraulic/steering system; do not use any fraying
cloths.
Catch any outflowing oil.

G.B 31/12/24