Komatsu HYDRAULIC EXCAVATOR PC700LC-11 Shop Manual SEN06700-08 PDF

Description

Komatsu HYDRAULIC EXCAVATOR PC700LC-11 Shop Manual SEN06700-08 – PDF DOWNLOAD

FILE DETAILS:

Komatsu HYDRAULIC EXCAVATOR PC700LC-11 Shop Manual SEN06700-08 – PDF DOWNLOAD

Language : English
Pages :2866
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Komatsu HYDRAULIC EXCAVATOR PC700LC-11 Shop Manual SEN06700-08 – PDF DOWNLOAD

SERIAL NUMBERS 80001 and up

FOREWORD, SAFETY, BASIC INFORMATION
HOW TO READ THE SHOP MANUAL
• Some of the attachments and options described in this shop manual may not be available in some areas. If
they are required, consult your Komatsu distributor.
• The materials and specifications are subject to change without notice.
• Shop Manuals are available for “machine part” and “engine part”. For the engine unit, see the shop manual
for the machine which has the same engine model.
• Actual machine may differ from the images which are contained in this manual. A typical model is shown in
the illustrations of this shop manual.
Composition of the shop manual
This shop manual contains technical information necessary to perform services in workshops. It is divided into
the following chapters for the ease of use.
00 INDEX AND FOREWORD
This section describes the index, foreword, safety, and basic information.
01 SPECIFICATIONS
This section describes the specifications of the machine.
10 STRUCTURE AND FUNCTION
This section describes the structure and operation of each component with respect to each system. “STRUCTURE
AND FUNCTION” is helpful in not only understanding the structure of each component but performing
troubleshooting.
20 STANDARD VALUE TABLE
This section describes the standard values for new machine and failure criteria for testing and adjusting, and
troubleshooting. Use the standard values table to check the standard values for testing and adjusting, and judge
troubles in troubleshooting.
30 TESTING AND ADJUSTING
This section describes the measuring tools and measuring methods for testing and adjusting as well as the adjusting
method of each part. The standard values and repair limit for TESTING AND ADJUSTING are described
in “STANDARD VALUE TABLE”.
40 TROUBLESHOOTING
This section describes troubleshooting of failure part and its remedy method on the occurrence of the failure.
Descriptions of troubleshooting are sorted by failure mode.
50 DISASSEMBLY AND ASSEMBLY
This section describes the special tools, work procedures, and safety precautions necessary for removal, installation,
disassembly, and assembly of the components and parts. In addition, tightening torques, quantity, and
weight of the coating materials, lubricants, and coolant necessary to these works are shown.
60 MAINTENANCE STANDARD
This section describes the maintenance standard value of each component. The maintenance standard shows
the criteria and remedies for disassembly and assembly.
80 THE OTHER INFORMATION
This section describes the structure and function, testing and adjusting, and troubleshooting for all of the other
components or equipment which cannot be separately classified in the appendix.
90 Circuit diagrams
This section describes hydraulic circuit diagrams and electrical circuit diagrams.

TABLE OF CONTENTS:

Komatsu HYDRAULIC EXCAVATOR PC700LC-11 Shop Manual SEN06700-08 – PDF DOWNLOAD

SERIAL NUMBERS 80001 and up

COVER 1
00 INDEX AND FOREWORD 3
INDEX 4
ABBREVIATION LIST 22
FOREWORD, SAFETY, BASIC INFORMATION 28
HOW TO READ THE SHOP MANUAL 28
SAFETY NOTICE FOR OPERATION 30
PRECAUTIONS TO PREVENT FIRE 38
ACTIONS IF FIRE OCCURS 40
PRECAUTIONS FOR DISPOSING OF WASTE MATERIALS 41
ACTIONS TAKEN TO MEET EXHAUST GAS REGULATIONS 42
PRECAUTIONS FOR DEF 43
GENERAL CHARACTER AND PRECAUTIONS FOR HANDLING 43
PRECAUTIONS FOR ADDING 43
PRECAUTIONS FOR STORING 43
PRECAUTIONS FOR FIRE HAZARD AND LEAKAGE 43
THE OTHER PRECAUTIONS 43
STORE AdBlue/DEF 44
PRECAUTIONS FOR HANDLING HYDRAULIC EQUIPMENT 45
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF PIPINGS 48
PRECAUTIONS FOR HANDLING ELECTRICAL EQUIPMENT 55
PRECAUTIONS FOR HANDLING FUEL SYSTEM EQUIPMENT 57
PRECAUTIONS FOR HANDLING INTAKE SYSTEM EQUIPMENT 58
PRACTICAL USE OF KOMTRAX 59
DISCONNECT AND CONNECT PUSH-PULL TYPE COUPLER 60
METHOD FOR DISCONNECTING AND CONNECTING TYPE 1 PUSH-PULL TYPE COUPLER 60
METHOD FOR DISCONNECTING AND CONNECTING TYPE 2 PUSH-PULL TYPE COUPLER 61
METHOD FOR DISCONNECTING AND CONNECTING TYPE 3 PUSH-PULL TYPE COUPLER 62
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF CONNECTORS 64
METHOD FOR DISCONNECTING AND CONNECTING DEUTSCH CONNECTOR 68
METHOD FOR DISCONNECTING AND CONNECTING SLIDE LOCK TYPE CONNECTOR 69
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PULL 71
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PUSH 72
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH HOUSING TO ROTATE 74
HOW TO READ ELECTRICAL WIRE CODE 75
EXPLANATION OF TERMS FOR MAINTENANCE STANDARD 79
STANDARD TIGHTENING TORQUE TABLE 82
CONVERSION TABLE 89
01 SPECIFICATIONS 95
CONTENTS 96
ABBREVIATION LIST 97
SPECIFICATIONS 103
SPECIFICATION DRAWING 103
SPECIFICATION DRAWING: PC700LC-11 103
WORKING RANGE DRAWINGS 105
WORKING RANGE: PC700LC-11 105
SPECIFICATIONS 106
SPECIFICATIONS: PC700LC-11 106
WEIGHT TABLE 109
WEIGHT TABLE: PC700LC-11 109
TABLE OF FUEL, COOLANT, AND LUBRICANTS 111
10 STRUCTURE AND FUNCTION 113
CONTENTS 114
ABBREVIATION LIST 118
UREA SCR SYSTEM 124
LAYOUT DRAWING OF UREA SCR SYSTEM 124
UREA SCR SYSTEM DIAGRAM 129
FUNCTION OF UREA SCR SYSTEM 130
FUNCTION OF AdBlue/DEF SYSTEM 130
INDUCEMENT STRATEGY 132
COMPONENT PARTS OF UREA SCR SYSTEM 140
AdBlue/DEF MIXING TUBE 140
SCR ASSEMBLY 140
AdBlue/DEF TANK 143
AdBlue/DEF PUMP 145
AdBlue/DEF INJECTOR 146
AdBlue/DEF HOSE 147
AdBlue/DEF TANK HEATING VALVE 148
BOOT-UP SYSTEM 149
LAYOUT DRAWING OF BOOT-UP SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 149
LAYOUT DRAWING OF BOOT-UP SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 150
SYSTEM OPERATING LAMP SYSTEM 151
SYSTEM OPERATING LAMP SYSTEM DIAGRAM (MACHINE WITH KOMTRAX TERMINAL) 151
SYSTEM OPERATING LAMP SYSTEM DIAGRAM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 151
FUNCTION OF SYSTEM OPERATING LAMP SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 151
FUNCTION OF SYSTEM OPERATING LAMP SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 152
BATTERY ISOLATOR 154
FUNCTION OF BATTERY ISOLATOR SWITCH 154
ENGINE SYSTEM 155
LAYOUT DRAWING OF ENGINE SYSTEM 155
FUNCTION OF ENGINE SYSTEM 156
ENGINE CONTROL SYSTEM 157
ENGINE CONTROL SYSTEM DIAGRAM (MACHINE WITH KOMTRAX TERMINAL) 157
ENGINE CONTROL SYSTEM DIAGRAM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 157
FUNCTION OF ENGINE CONTROL SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 158
FUNCTION OF ENGINE CONTROL SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 161
AUTO-DECELERATION SYSTEM 164
AUTO-DECELERATION SYSTEM DIAGRAM 164
FUNCTION OF AUTO-DECELERATION SYSTEM 164
OPERATION OF AUTO-DECELERATION SYSTEM 165
AUTOMATIC LOW IDLE SYSTEM 166
AUTOMATIC LOW IDLE SYSTEM DIAGRAM 166
FUNCTION OF AUTOMATIC LOW IDLE SYSTEM 166
OPERATION OF AUTOMATIC LOW IDLE SYSTEM 167
ENGINE AUTOMATIC WARM-UP SYSTEM 168
ENGINE AUTOMATIC WARM-UP SYSTEM DIAGRAM 168
FUNCTION OF ENGINE AUTOMATIC WARM-UP SYSTEM 169
OVERHEAT PREVENTION SYSTEM 171
OVERHEAT PREVENTION SYSTEM DIAGRAM 171
FUNCTION OF OVERHEAT PREVENTION SYSTEM 172
TURBOCHARGER PROTECTION SYSTEM 173
TURBOCHARGER PROTECTION SYSTEM DIAGRAM 173
FUNCTION OF TURBOCHARGER PROTECTION SYSTEM 174
AUTOMATIC IDLE STOP SYSTEM 175
AUTOMATIC IDLE STOP SYSTEM DIAGRAM (MACHINE WITH KOMTRAX TERMINAL) 175
AUTOMATIC IDLE STOP SYSTEM DIAGRAM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 175
FUNCTION OF AUTOMATIC IDLE STOP SYSTEM 176
COMPONENT PARTS OF ENGINE SYSTEM 179
PTO 179
VGT 180
EGR SYSTEM 183
EGR VALVE 185
EGR COOLER 187
KCCV SYSTEM 188
KCCV VENTILATOR 190
KDPF 192
COOLING SYSTEM 197
LAYOUT DRAWING OF COOLING SYSTEM 197
SPECIFICATIONS OF COOLING SYSTEM 198
FAN SPEED CONTROL SYSTEM OF HYDRAULIC FAN 199
FAN SPEED CONTROL SYSTEM DIAGRAM OF HYDRAULIC FAN 199
FUNCTION OF FAN SPEED CONTROL SYSTEM OF HYDRAULIC FAN 200
ENGINE OUTPUT CONTROL SYSTEM OF HYDRAULIC FAN 201
ENGINE OUTPUT CONTROL SYSTEM DIAGRAM OF HYDRAULIC FAN 201
FUNCTION OF ENGINE OUTPUT CONTROL SYSTEM OF HYDRAULIC FAN 201
FAN REVERSE ROTATION SYSTEM OF HYDRAULIC FAN 203
FAN REVERSE ROTATION SYSTEM DIAGRAM OF HYDRAULIC FAN 203
FUNCTION OF FAN REVERSE ROTATION SYSTEM OF HYDRAULIC FAN 203
COMPONENT PARTS OF COOLING SYSTEM 204
COOLING FAN PUMP 204
COOLING FAN MOTOR 212
CONTROL SYSTEM 219
LAYOUT DRAWING OF CONTROL SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 219
LAYOUT DRAWING OF CONTROL SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 221
MACHINE MONITOR SYSTEM 223
MACHINE MONITOR SYSTEM DIAGRAM (MACHINE WITH KOMTRAX TERMINAL) 223
MACHINE MONITOR SYSTEM DIAGRAM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 224
FUNCTION OF MACHINE MONITOR SYSTEM 224
KomVision SYSTEM 226
LAYOUT DRAWING OF KOMVISION SYSTEM 226
KomVision SYSTEM DIAGRAM 228
FUNCTION OF KomVision SYSTEM 228
KOMTRAX SYSTEM 230
KOMTRAX SYSTEM DIAGRAM (MACHINE WITH KOMTRAX TERMINAL) 230
KOMTRAX SYSTEM DIAGRAM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 230
FUNCTION OF KOMTRAX SYSTEM 231
COMPONENT PARTS OF CONTROL SYSTEM 232
MACHINE MONITOR 232
KomVision CONTROLLER 245
KomVision CAMERA 249
KOMTRAX TERMINAL 249
GATEWAY FUNCTION CONTROLLER 252
COMMUNICATION TERMINAL 255
PUMP CONTROLLER 257
RESISTOR FOR TVC VALVE 261
CAN TERMINATING RESISTOR 261
PPC OIL PRESSURE SWITCH 262
ENGINE CONTROLLER 263
FUEL CONTROL DIAL 269
FUEL FEED PUMP 271
FUEL FEED PUMP SWITCH 272
HYDRAULIC SYSTEM 273
LAYOUT DRAWING OF HYDRAULIC SYSTEM 273
OLSS 276
STRUCTURE OF OLSS 276
FUNCTION OF OLSS 276
PUMP SWASH PLATE ANGLE (OIL FLOW) CONTROL 277
ENGINE AND PUMP COMBINED CONTROL SYSTEM 288
ENGINE AND PUMP COMBINED CONTROL SYSTEM DIAGRAM 288
FUNCTION OF ENGINE AND PUMP COMBINED CONTROL SYSTEM 290
COMPONENT PARTS OF HYDRAULIC SYSTEM 293
HYDRAULIC TANK 293
MAIN PUMP 295
PILOT OIL FILTER 323
CONTROL VALVE 323
VARIABLE BACK PRESSURE VALVE 343
WORK EQUIPMENT SYSTEM 346
LAYOUT DRAWING OF WORK EQUIPMENT SYSTEM 346
ONE-TOUCH POWER MAXIMIZING SYSTEM 352
ONE-TOUCH POWER MAXIMIZING SYSTEM DIAGRAM 352
FUNCTION OF ONE-TOUCH POWER MAXIMIZING SYSTEM 353
MACHINE PUSH-UP SYSTEM 354
MACHINE PUSH-UP SYSTEM DIAGRAM 354
FUNCTION OF MACHINE PUSH-UP SYSTEM 355
BOOM SHOCKLESS CONTROL FUNCTION 356
BOOM SHOCKLESS CONTROL FUNCTION SYSTEM DIAGRAM 356
OPERATION OF BOOM SHOCKLESS CONTROL FUNCTION 356
PPC LOCK SYSTEM 357
PPC LOCK SYSTEM DIAGRAM 357
FUNCTION OF PPC LOCK SYSTEM 357
WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM 358
WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM DIAGRAM 358
FUNCTION OF WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM 358
OPERATION OF WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM 359
ATTACHMENT OIL FLOW ADJUSTER SYSTEM 360
OIL FLOW ADJUSTER SYSTEM DIAGRAM FOR ATTACHMENT 360
FUNCTION OF OIL FLOW ADJUSTER SYSTEM FOR ATTACHMENT 363
COMPONENT PARTS OF WORK EQUIPMENT SYSTEM 364
WORK EQUIPMENT AND SWING PPC VALVE 364
1ST-LINE ATTACHMENT PPC VALVE 368
PPC SHUTTLE VALVE 370
SOLENOID VALVE 371
PILOT CIRCUIT ACCUMULATOR 373
SWING SYSTEM 375
LAYOUT DRAWING OF SWING SYSTEM 375
SWING CONTROL SYSTEM DIAGRAM 378
FUNCTION OF SWING CONTROL SYSTEM 379
COMPONENT PARTS OF SWING SYSTEM 382
SWING MOTOR 382
SWING MACHINERY 393
SWING CIRCLE 394
TRAVEL SYSTEM 396
LAYOUT DRAWING OF TRAVEL SYSTEM 396
TRAVEL CONTROL SYSTEM DIAGRAM 400
FUNCTION OF TRAVEL CONTROL SYSTEM 401
COMPONENT PARTS OF TRAVEL SYSTEM 403
TRAVEL MOTOR 403
FINAL DRIVE 414
TRAVEL PPC VALVE 415
CENTER SWIVEL JOINT 419
UNDERCARRIAGE AND FRAME 421
LAYOUT DRAWING OF UNDERCARRIAGE 421
SPECIFICATIONS OF UNDERCARRIAGE 421
WORK EQUIPMENT 422
STRUCTURE OF WORK EQUIPMENT 422
FUNCTION OF WORK EQUIPMENT 423
WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM 424
FUNCTION OF WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM 424
BUCKET CLEARANCE ADJUSTMENT SHIM 425
FUNCTION OF BUCKET CLEARANCE ADJUSTMENT SHIM 425
CAB AND ITS ATTACHMENTS 426
CAB 426
STRUCTURE OF CAB 426
CAB MOUNT 427
STRUCTURE OF CAB MOUNT 427
FUNCTION OF CAB MOUNT 427
CAB TIPPING STOPPER 428
STRUCTURE OF CAB TIPPING STOPPER 428
FUNCTION OF CAB TIPPING STOPPER 428
20 STANDARD VALUE TABLE 429
CONTENTS 430
ABBREVIATION LIST 431
STANDARD VALUE TABLE FOR ENGINE 437
STANDARD VALUE TABLE FOR ENGINE: PC700LC-11 437
STANDARD VALUE TABLE FOR MACHINE 442
STANDARD VALUE TABLE FOR MACHINE: PC700LC-11 442
MACHINE POSTURE AND PROCEDURE FOR MEASURING PERFORMANCE 459
30 TESTING AND ADJUSTING 463
CONTENTS 464
ABBREVIATION LIST 468
RELATED INFORMATION ON TESTING AND ADJUSTING 474
TOOLS FOR TESTING AND ADJUSTING 474
SKETCH OF TOOLS FOR TESTING AND ADJUSTING 483
ENGINE AND COOLING SYSTEM 485
TEST ENGINE SPEED 485
METHOD FOR TESTING ENGINE SPEED 485
TEST BOOST PRESSURE 488
METHOD FOR TESTING BOOST PRESSURE ON MACHINE MONITOR 488
METHOD FOR TESTING BOOST PRESSURE BY TESTING TOOL 489
TEST EXHAUST GAS TEMPERATURE 490
METHOD FOR TESTING EXHAUST GAS TEMPERATURE 490
TEST EXHAUST GAS COLOR 492
METHOD FOR TESTING EXHAUST GAS COLOR BY HANDY SMOKE CHECKER 492
METHOD FOR TESTING EXHAUST GAS COLOR BY SMOKE METER 493
TEST MASS AIR FLOW AND TEMPERATURE SENSOR 495
TEST MASS AIR FLOW AND TEMPERATURE SENSOR 495
TEST AND ADJUST VALVE CLEARANCE 497
METHOD FOR TESTING VALVE CLEARANCE 497
METHOD FOR ADJUSTING VALVE CLEARANCE 498
TEST COMPRESSION PRESSURE 500
METHOD FOR TESTING COMPRESSION PRESSURE 500
TEST BLOWBY PRESSURE 503
METHOD FOR TESTING BLOWBY PRESSURE 503
TEST ENGINE OIL PRESSURE 505
METHOD FOR TESTING ENGINE OIL PRESSURE BY MACHINE MONITOR 505
METHOD FOR TESTING ENGINE OIL PRESSURE BY TESTING TOOL 505
TEST EGR VALVE AND VGT OIL PRESSURE 507
METHOD FOR TESTING EGR VALVE AND VGT OIL PRESSURE 507
TEST FUEL PRESSURE 509
METHOD FOR TESTING FUEL PRESSURE 509
TEST FUEL RETURN RATE AND LEAKAGE 511
METHOD FOR TESTING FUEL RETURN RATE AND LEAKAGE 511
BLEED AIR FROM FUEL SYSTEM 514
METHOD FOR BLEEDING AIR FROM FUEL SYSTEM 514
TEST FUEL CIRCUIT FOR LEAKAGE 516
METHOD FOR TESTING FUEL CIRCUIT FOR LEAKAGE 516
HANDLE CYLINDER CUT-OUT MODE OPERATION 518
HANDLE NO-INJECTION CRANKING OPERATION 519
TEST AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION 520
METHOD FOR CHECKING AIR CONDITIONER COMPRESSOR BELT 520
METHOD FOR REPLACING FAN BELT 521
CLEAN FUEL DOSER 522
METHOD FOR CLEANING FUEL DOSER 522
WRITE INJECTOR COMPENSATION VALUE TO ENGINE CONTROLLER 524
METHOD FOR WRITING INJECTOR COMPENSATION VALUE 524
WRITE ASH IN SOOT ACCUMULATION CORRECTION TO ENGINE CONTROLLER 530
METHOD FOR WRITING ASH IN SOOT ACCUMULATION CORRECTION TO ENGINE CONTROLLER 530
TEST SCR RELATED FUNCTIONS 531
TEST AdBlue/DEF PUMP RAISED PRESSURE 534
TEST INJECTION AMOUNT FROM AdBlue/DEF INJECTOR 537
TEST AdBlue/DEF LINE HEATER RELAY 1 541
TEST AdBlue/DEF LINE HEATER RELAY 2 544
TEST AdBlue/DEF PUMP HEATER RELAY 546
TEST AdBlue/DEF TANK HEATER VALVE 550
TEST DENITRATION EFFICIENCY OF SCR 552
CLEAN AdBlue/DEF TANK 557
METHOD FOR CLEANING AdBlue/DEF TANK 557
CLEAN AdBlue/DEF PUMP 561
CLEAN AdBlue/DEF PUMP 561
POWER TRAIN 567
TEST SWING CIRCLE BEARING CLEARANCE 567
METHOD FOR TESTING SWING CIRCLE BEARING CLEARANCE 567
UNDERCARRIAGE AND FRAME 568
TEST AND ADJUST TRACK TENSION 568
METHOD FOR TESTING TRACK TENSION 568
METHOD FOR ADJUSTING TRACK TENSION 568
HYDRAULIC SYSTEM 570
RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM 570
METHOD FOR RELEASING REMAINING PRESSURE FROM HYDRAULIC CIRCUIT 570
METHOD FOR RELEASING REMAINING PRESSURE FROM SWING MOTOR CIRCUIT 579
METHOD FOR RELEASING REMAINING PRESSURE FROM TRAVEL MOTOR CIRCUIT 579
TEST AND ADJUST OIL PRESSURE IN WORK EQUIPMENT, SWING, AND TRAVEL CIRCUITS 580
METHOD FOR TESTING OIL PRESSURE IN WORK EQUIPMENT, SWING, AND TRAVEL CIRCUITS 583
METHOD FOR ADJUSTING OIL PRESSURE IN WORK EQUIPMENT, SWING, AND TRAVEL CIRCUITS 591
TEST AND ADJUST OIL PRESSURE OF CONTROL CIRCUIT 595
METHOD FOR TESTING OIL PRESSURE OF CONTROL CIRCUIT 595
METHOD FOR ADJUSTING OIL PRESSURE OF CONTROL CIRCUIT 596
TEST AND ADJUST PISTON PUMP CONTROL OIL PRESSURE 597
METHOD FOR TESTING TVC VALVE OUTLET PRESSURE 597
METHOD FOR TESTING CO AND NC VALVE OUTLET PRESSURE 598
METHOD FOR TESTING JET SENSOR OUTLET PRESSURE 599
METHOD FOR ADJUSTING TVC VALVE 601
METHOD FOR ADJUSTING CO AND NC VALVE 602
METHOD FOR ADJUSTING JET SENSOR 603
TEST SERVO PISTON STROKE 604
METHOD FOR TESTING SERVO PISTON STROKE 604
TEST OUTLET PRESSURE OF SOLENOID VALVE 606
METHOD FOR TESTING OUTLET PRESSURE OF SOLENOID VALVE 606
OPERATING CONDITION OF SOLENOID VALVE 607
TEST PPC VALVE OUTLET PRESSURE 610
METHOD FOR TESTING PPC VALVE OUTLET PRESSURE 610
TEST PPC SHUTTLE VALVE OUTLET PRESSURE 612
METHOD FOR TESTING PPC SHUTTLE VALVE OUTLET PRESSURE 612
ADJUST WORK EQUIPMENT AND SWING PPC VALVES 616
METHOD FOR ADJUSTING PLAY OF WORK EQUIPMENT AND SWING PPC VALVES 616
TEST AND ADJUST TRAVEL DEVIATION 617
METHOD FOR TESTING TRAVEL DEVIATION 617
METHOD FOR ADJUSTING TRAVEL DEVIATION 617
TEST COOLING FAN SPEED 619
METHOD FOR TESTING COOLING FAN SPEED 619
TEST OIL PRESSURE IN FAN PUMP CIRCUIT 620
METHOD FOR TESTING OIL PRESSURE IN FAN PUMP CIRCUIT 620
TEST FAN PUMP EPC ELECTRIC CURRENT 621
METHOD FOR TESTING FAN PUMP EPC ELECTRIC CURRENT 621
TEST FAN PUMP EPC SOLENOID VALVE OUTLET PRESSURE 622
METHOD FOR TESTING FAN PUMP EPC SOLENOID VALVE OUTLET PRESSURE 622
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT 623
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF BOOM CYLINDER AND BUCKET CYLINDER 623
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF ARM CYLINDER 623
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF PPC VALVE 624
TEST OIL LEAKAGE 625
METHOD FOR TESTING OIL LEAKAGE FROM BOOM CYLINDER 625
METHOD FOR TESTING OIL LEAKAGE FROM ARM CYLINDER 626
METHOD FOR TESTING OIL LEAKAGE FROM BUCKET CYLINDER 626
METHOD FOR TESTING OIL LEAKAGE FROM SWING MOTOR 627
METHOD FOR TESTING OIL LEAKAGE FROM TRAVEL MOTOR 627
METHOD FOR TESTING OIL LEAKAGE OF SWIVEL JOINT 628
BLEED AIR FROM HYDRAULIC CIRCUIT 630
METHOD FOR BLEEDING AIR FROM HYDRAULIC CIRCUIT 631
CAB AND ITS ATTACHMENTS 634
TEST CAB TIPPING STOPPER 634
METHOD FOR TESTING CAB TIPPING STOPPER 634
METHOD FOR ADJUSTING MIRRORS 635
PROCEDURE FOR ADJUSTING MACHINE LEFT FRONT MIRROR (A) 635
PROCEDURE FOR ADJUSTING REGULAR POSITION OF MACHINE LEFT FRONT MIRROR (A) 636
PROCEDURE FOR ADJUSTING MACHINE RIGHT FRONT MIRROR (B) 637
PROCEDURE FOR ADJUSTING REGULAR POSITION OF MACHINE RIGHT FRONT MIRROR (B) 638
ELECTRICAL SYSTEM 640
SET AND OPERATE MACHINE MONITOR 640
OPERATOR MODE 643
DISPLAY FUNCTION OF TECHNICIAN IDENTIFICATION STATUS SCREEN 643
DISPLAY FUNCTION OF OPERATOR IDENTIFICATION INPUT SCREEN 643
CHECKING FUNCTION BY LCD (LIQUID CRYSTAL DISPLAY) 644
CHECKING FUNCTION OF SERVICE METER 645
METHOD FOR SETTING USAGE LIMITATION AND CHANGING PASSWORD 645
SERVICE MODE 647
METHOD FOR OPERATING SERVICE MODE 647
METHOD FOR CHECKING PRE-DEFINED MONITORING INFORMATION 650
METHOD FOR CHECKING SELF-DEFINE MONITORING INFORMATION 656
ABNORMALITY RECORD MENU 667
METHOD FOR CONFIRMING MAINTENANCE RECORD 672
METHOD FOR OPERATING MAINTENANCE MODE SETTING 673
METHOD FOR OPERATING PHONE NUMBER ENTRY SETTING 677
DEFAULT MENU 678
DIAGNOSTIC TESTS MENU 684
ADJUSTMENT MENU 694
METHOD FOR PERFORMING NO-INJECTION CRANKING 698
KOMTRAX SETTINGS MENU 699
METHOD FOR DISPLAYING SERVICE MESSAGE 701
METHOD FOR STARTING UP KOMTRAX TERMINAL (MACHINE WITH KOMTRAX TERMINAL) 703
METHOD FOR STARTING UP KOMTRAX SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 708
ADJUST REARVIEW CAMERA ANGLE 713
METHOD FOR ADJUSTING REAR VIEW CAMERA ANGLE 713
ADJUST KomVision CAMERA ANGLE 715
METHOD FOR ADJUSTING KomVision CAMERA ANGLE 716
ADJUST KomVision RELATED ITEMS 718
SETTING OF KomVision (MAIN SETTING) 718
SETTING OF KomVision (CAMERA SETTING) 720
SETTING OF KomVision (CAMERA CALIBRATION) 722
KomVision screen – Check 12 m visibility 735
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER 738
HANDLE BATTERY ISOLATOR SWITCH 739
TEST DIODES 740
METHOD FOR TESTING DIODE USING DIGITAL TESTER 740
METHOD FOR TESTING DIODE USING ANALOG TESTER 740
Pm CLINIC 741
Pm CLINIC SERVICE 741
Pm CLINIC CHECK SHEET: PC700LC-11 744
40 TROUBLESHOOTING 761
CONTENTS 762
ABBREVIATION LIST 773
RELATED INFORMATION ON TROUBLESHOOTING 779
GENERAL TROUBLESHOOTING POINTS 779
TROUBLESHOOTING POINTS FOR UREA SCR SYSTEM 780
SEQUENCE OF EVENTS IN TROUBLESHOOTING 795
CHECKS BEFORE TROUBLESHOOTING 797
INSPECTION PROCEDURE BEFORE TROUBLESHOOTING 799
WALK-AROUND CHECK 799
TESTING IN ACCORDANCE WITH TESTING PROCEDURE 801
CHECK FUEL LEVEL AND TYPE 801
CHECK IMPURE INGREDIENT IN FUEL 802
CHECK FUEL PREFILTER 802
WATER SEPARATOR – CHECK / DRAIN WATER AND SEDIMENT 802
FUEL PREFILTER CARTRIDGE – REPLACE 803
CHECK MAIN FILTER 804
CHECK ENGINE OIL LEVEL (OIL AMOUNT IN OIL PAN) 805
CHECK COOLANT LEVEL (RESERVOIR TANK) 807
CHECK CLOGGING OF AIR CLEANER 807
OUTER ELEMENT – CLEAN 807
ELEMENTS – REPLACE 810
CHECK HYDRAULIC OIL LEVEL 810
CHECK HYDRAULIC OIL STRAINER 812
CHECK HYDRAULIC FILTER 812
CHECK OIL LEVEL IN SWING MACHINERY CASE 813
CHECK OIL LEVEL IN PTO CASE 814
CHECK PTO LUBRICATION FILTER STRAINER 814
CHECK OIL LEVEL IN FINAL DRIVE CASE 815
BLEED AIR FROM FUEL SYSTEM 816
BLEED AIR FROM HYDRAULIC SYSTEM 816
ELECTRICAL EQUIPMENT – CHECK METHOD 816
PREPARATION FOR TROUBLESHOOTING OF ELECTRICAL SYSTEM 822
PREPARATION FOR TROUBLESHOOTING OF MACHINE MONITOR 822
PREPARATION FOR TROUBLESHOOTING OF ENGINE CONTROLLER 822
PREPARATION FOR TROUBLESHOOTING OF PUMP CONTROLLER 822
PREPARATION FOR TROUBLESHOOTING OF KOMTRAX TERMINAL 823
PREPARATION FOR TROUBLESHOOTING OF GATEWAY CONTROLLER 823
DISCONNECT AND CONNECT CONNECTOR WITH A SPECIAL LOCK 826
PROCEDURE FOR TESTING AND TROUBLESHOOTING 831
SYMPTOMS OF FAILURE AND TROUBLESHOOTING NUMBERS 834
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 838
TROUBLESHOOTING METHOD FOR OPEN CIRCUIT IN WIRING HARNESS OF PRESSURE SENSOR SYSTEM 840
CONNECTOR LIST AND LAYOUT 843
CONNECTOR CONTACT IDENTIFICATION 858
T-BRANCH BOX AND T-BRANCH ADAPTER TABLE 898
FUSE LOCATION TABLE 904
PRECAUTIONS FOR CLEANING AND REPLACING KDPF (KCSF and KDOC) 907
PREPARATION OF SHORT CIRCUIT ELECTRICAL CONNECTOR (FOR FAILURE CODES [CA1883] AND [CA3135]) 911
FAILURE CODE TABLE 913
TROUBLESHOOTING BY FAILURE CODE (DISPLAY OF CODE) 931
FAILURE CODE [879AKA] 931
FAILURE CODE [879AKB] 932
FAILURE CODE [879BKA] 933
FAILURE CODE [879BKB] 935
FAILURE CODE [879CKA] 937
FAILURE CODE [879CKB] 938
FAILURE CODE [879DKZ] 939
FAILURE CODE [879EMC] 941
FAILURE CODE [879FMC] 942
FAILURE CODE [879GKX] 943
FAILURE CODE [989L00] 945
FAILURE CODE [989M00] 946
FAILURE CODE [989N00] 947
FAILURE CODE [A1U0N3] 948
FAILURE CODE [A1U0N4] 950
FAILURE CODE [A900FR] 952
FAILURE CODE [A900N6] 953
FAILURE CODE [A900NY] 954
FAILURE CODE [AA10NX] 955
FAILURE CODE [AB00KE] 957
FAILURE CODE [AQ10N3] 959
FAILURE CODE [AS00N3] 961
FAILURE CODE [AS00R2] 963
FAILURE CODE [AS00R3] 964
FAILURE CODE [AS00R4] 965
FAILURE CODE [AS00R5] 966
FAILURE CODE [AS00R6] 967
FAILURE CODE [AS00ZK] 968
FAILURE CODE [AS10KM] 969
FAILURE CODE [AS10NR] 970
FAILURE CODE [AS10NT] 971
FAILURE CODE [B@BAZG] 972
FAILURE CODE [B@BAZK] 973
FAILURE CODE [B@BCNS] 975
FAILURE CODE [B@BCQA] 976
FAILURE CODE [B@BCZK] 978
FAILURE CODE [B@HANS] 980
FAILURE CODE [CA115] 981
FAILURE CODE [CA122] 982
FAILURE CODE [CA123] 984
FAILURE CODE [CA131] 986
FAILURE CODE [CA132] 988
FAILURE CODE [CA135] 990
FAILURE CODE [CA141] 992
FAILURE CODE [CA144] 994
FAILURE CODE [CA145] 996
FAILURE CODE [CA153] 998
FAILURE CODE [CA154]1001
FAILURE CODE [CA187]1004
FAILURE CODE [CA221]1006
FAILURE CODE [CA222]1008
FAILURE CODE [CA227]1010
FAILURE CODE [CA234]1011
FAILURE CODE [CA238]1012
FAILURE CODE [CA239]1014
FAILURE CODE [CA249]1016
FAILURE CODE [CA256]1018
FAILURE CODE [CA271]1020
FAILURE CODE [CA272]1022
FAILURE CODE [CA273]1023
FAILURE CODE [CA274]1025
FAILURE CODE [CA322]1026
FAILURE CODE [CA323]1028
FAILURE CODE [CA324]1030
FAILURE CODE [CA325]1032
FAILURE CODE [CA331]1034
FAILURE CODE [CA332]1036
FAILURE CODE [CA343]1038
FAILURE CODE [CA351]1039
FAILURE CODE [CA352]1040
FAILURE CODE [CA356]1043
FAILURE CODE [CA357]1045
FAILURE CODE [CA386]1047
FAILURE CODE [CA441]1048
FAILURE CODE [CA442]1050
FAILURE CODE [CA449]1051
FAILURE CODE [CA451]1052
FAILURE CODE [CA452]1054
FAILURE CODE [CA515]1056
FAILURE CODE [CA516]1058
FAILURE CODE [CA553]1060
FAILURE CODE [CA555]1061
FAILURE CODE [CA556]1062
FAILURE CODE [CA559]1063
FAILURE CODE [CA595]1068
FAILURE CODE [CA687]1069
FAILURE CODE [CA689]1071
FAILURE CODE [CA691]1073
FAILURE CODE [CA692]1075
FAILURE CODE [CA697]1077
FAILURE CODE [CA698]1078
FAILURE CODE [CA731]1079
FAILURE CODE [CA778]1080
FAILURE CODE [CA1117]1083
FAILURE CODE [CA1664]1084
FAILURE CODE [CA1669]1088
FAILURE CODE [CA1673]1089
FAILURE CODE [CA1677]1090
FAILURE CODE [CA1678]1091
FAILURE CODE [CA1682]1092
FAILURE CODE [CA1683]1094
FAILURE CODE [CA1684]1096
FAILURE CODE [CA1686]1098
FAILURE CODE [CA1691]1099
FAILURE CODE [CA1694]1102
FAILURE CODE [CA1695]1104
FAILURE CODE [CA1696]1105
FAILURE CODE [CA1712]1107
FAILURE CODE [CA1713]1110
FAILURE CODE [CA1714]1113
FAILURE CODE [CA1715]1114
FAILURE CODE [CA1776]1115
FAILURE CODE [CA1777]1118
FAILURE CODE [CA1843]1121
FAILURE CODE [CA1844]1123
FAILURE CODE [CA1879]1126
FAILURE CODE [CA1881]1129
FAILURE CODE [CA1883]1131
FAILURE CODE [CA1885]1135
FAILURE CODE [CA1887]1137
FAILURE CODE [CA1921]1139
FAILURE CODE [CA1922]1142
FAILURE CODE [CA1923]1147
FAILURE CODE [CA1924]1149
FAILURE CODE [CA1925]1151
FAILURE CODE [CA1927]1153
FAILURE CODE [CA1928]1155
FAILURE CODE [CA1942]1157
FAILURE CODE [CA1963]1158
FAILURE CODE [CA1977]1162
FAILURE CODE [CA1993]1165
FAILURE CODE [CA2185]1168
FAILURE CODE [CA2186]1170
FAILURE CODE [CA2249]1172
FAILURE CODE [CA2265]1173
FAILURE CODE [CA2266]1175
FAILURE CODE [CA2271]1177
FAILURE CODE [CA2272]1179
FAILURE CODE [CA2349]1181
FAILURE CODE [CA2353]1183
FAILURE CODE [CA2357]1185
FAILURE CODE [CA2381]1186
FAILURE CODE [CA2382]1188
FAILURE CODE [CA2383]1190
FAILURE CODE [CA2386]1192
FAILURE CODE [CA2387]1194
TROUBLESHOOTING FLOWCHART1198
FAILURE CODE [CA2555]1199
FAILURE CODE [CA2556]1201
FAILURE CODE [CA2637]1203
FAILURE CODE [CA2639]1205
FAILURE CODE [CA2732]1207
FAILURE CODE [CA2733]1209
FAILURE CODE [CA2741]1211
FAILURE CODE [CA2765]1212
FAILURE CODE [CA2771]1213
FAILURE CODE [CA2777]1219
FAILURE CODE [CA2878]1222
FAILURE CODE [CA2881]1225
FAILURE CODE [CA2976]1228
FAILURE CODE [CA3133]1230
FAILURE CODE [CA3134]1232
FAILURE CODE [CA3135]1234
FAILURE CODE [CA3142]1237
FAILURE CODE [CA3143]1238
FAILURE CODE [CA3144]1239
FAILURE CODE [CA3146]1241
FAILURE CODE [CA3147]1242
FAILURE CODE [CA3148]1243
FAILURE CODE [CA3151]1245
FAILURE CODE [CA3165]1250
FAILURE CODE [CA3167]1253
FAILURE CODE [CA3229]1257
FAILURE CODE [CA3231]1260
FAILURE CODE [CA3232]1263
FAILURE CODE [CA3235]1268
FAILURE CODE [CA3239]1270
FAILURE CODE [CA3241]1273
FAILURE CODE [CA3242]1276
FAILURE CODE [CA3251]1279
FAILURE CODE [CA3253]1282
FAILURE CODE [CA3254]1288
FAILURE CODE [CA3255]1292
FAILURE CODE [CA3256]1295
FAILURE CODE [CA3311]1298
FAILURE CODE [CA3312]1301
FAILURE CODE [CA3313]1304
FAILURE CODE [CA3314]1305
FAILURE CODE [CA3315]1306
FAILURE CODE [CA3316]1309
FAILURE CODE [CA3317]1310
FAILURE CODE [CA3318]1311
FAILURE CODE [CA3319]1314
FAILURE CODE [CA3321]1315
FAILURE CODE [CA3322]1316
FAILURE CODE [CA3419]1319
FAILURE CODE [CA3421]1321
FAILURE CODE [CA3497]1323
FAILURE CODE [CA3498]1324
FAILURE CODE [CA3543]1325
FAILURE CODE [CA3545]1330
FAILURE CODE [CA3547]1332
FAILURE CODE [CA3558]1333
FAILURE CODE [CA3559]1335
FAILURE CODE [CA3562]1337
FAILURE CODE [CA3563]1339
FAILURE CODE [CA3567]1342
FAILURE CODE [CA3568]1345
FAILURE CODE [CA3571]1349
FAILURE CODE [CA3572]1351
FAILURE CODE [CA3574]1353
FAILURE CODE [CA3575]1356
FAILURE CODE [CA3577]1358
FAILURE CODE [CA3578]1360
FAILURE CODE [CA3582]1362
FAILURE CODE [CA3583]1368
FAILURE CODE [CA3596]1370
FAILURE CODE [CA3649]1374
FAILURE CODE [CA3681]1377
FAILURE CODE [CA3682]1382
FAILURE CODE [CA3713]1388
FAILURE CODE [CA3717]1391
FAILURE CODE [CA3718]1392
FAILURE CODE [CA3725]1393
FAILURE CODE [CA3748]1396
FAILURE CODE [CA3751]1398
FAILURE CODE [CA3755]1400
FAILURE CODE [CA3866]1402
FAILURE CODE [CA3867]1406
FAILURE CODE [CA3868]1409
FAILURE CODE [CA3899]1413
FAILURE CODE [CA3911]1416
FAILURE CODE [CA3912]1420
FAILURE CODE [CA3932]1422
FAILURE CODE [CA3933]1424
FAILURE CODE [CA3934]1426
FAILURE CODE [CA3935]1429
FAILURE CODE [CA3936]1431
FAILURE CODE [CA4151]1433
FAILURE CODE [CA4152]1437
FAILURE CODE [CA4155]1441
FAILURE CODE [CA4156]1443
FAILURE CODE [CA4157]1446
FAILURE CODE [CA4158]1448
FAILURE CODE [CA4159]1450
FAILURE CODE [CA4161]1452
FAILURE CODE [CA4162]1455
FAILURE CODE [CA4163]1458
FAILURE CODE [CA4164]1460
FAILURE CODE [CA4165]1462
FAILURE CODE [CA4166]1464
FAILURE CODE [CA4168]1467
FAILURE CODE [CA4169]1472
FAILURE CODE [CA4171]1477
FAILURE CODE [CA4249]1482
FAILURE CODE [CA4251]1486
FAILURE CODE [CA4259]1490
FAILURE CODE [CA4261]1493
FAILURE CODE [CA4277]1496
FAILURE CODE [CA4281]1500
FAILURE CODE [CA4459]1503
FAILURE CODE [CA4461]1506
FAILURE CODE [CA4658]1509
FAILURE CODE [CA4731]1513
FAILURE CODE [CA4732]1514
FAILURE CODE [CA4739]1515
FAILURE CODE [CA4768]1516
FAILURE CODE [CA4769]1518
FAILURE CODE [CA4842]1521
FAILURE CODE [CA4952]1525
FAILURE CODE [CA5115]1527
FAILURE CODE [CA5179]1530
FAILURE CODE [CA5181]1532
FAILURE CODE [CA5383]1534
FAILURE CODE [D110KB]1536
FAILURE CODE [D163KB]1538
FAILURE CODE [D195KA]1540
FAILURE CODE [D195KB]1542
FAILURE CODE [D19JKZ]1544
FAILURE CODE [D811MC] (MACHINE WITH KOMTRAX TERMINAL)1546
FAILURE CODE [D811MC] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1547
FAILURE CODE [D862KA] (MACHINE WITH KOMTRAX TERMINAL)1548
FAILURE CODE [D862KA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1549
FAILURE CODE [D8ALKA] (MACHINE WITH KOMTRAX TERMINAL)1551
FAILURE CODE [D8ALKA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1553
FAILURE CODE [D8ALKB] (MACHINE WITH KOMTRAX TERMINAL)1556
FAILURE CODE [D8ALKB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1558
FAILURE CODE [D8AQKR]1560
FAILURE CODE [D8G1KT] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1564
FAILURE CODE [D8G6KT] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1565
FAILURE CODE [DA20MC]1566
FAILURE CODE [DA22KK]1567
FAILURE CODE [DA25KP]1569
FAILURE CODE [DA26KP]1571
FAILURE CODE [DA29KQ]1574
FAILURE CODE [DA2LKA]1576
FAILURE CODE [DA2LKB]1578
FAILURE CODE [DA2QKR]1580
FAILURE CODE [DA2RKR]1585
FAILURE CODE [DAF0KM]1590
FAILURE CODE [DAF0MB]1591
FAILURE CODE [DAF0MC]1592
FAILURE CODE [DAF8KB]1593
FAILURE CODE [DAF9KQ]1594
FAILURE CODE [DAFGMC] (MACHINE WITH KOMTRAX TERMINAL)1595
FAILURE CODE [DAFGMC] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1596
FAILURE CODE [DAFLKA]1597
FAILURE CODE [DAFLKB]1599
FAILURE CODE [DAFQKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1601
FAILURE CODE [DAFQKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1605
FAILURE CODE [DAZ9KQ]1609
FAILURE CODE [DAZQKR]1610
FAILURE CODE [DB2QKR]1614
FAILURE CODE [DB2RKR]1619
FAILURE CODE [DBP0KM]1624
FAILURE CODE [DBP0KT]1625
FAILURE CODE [DBPQKR]1626
FAILURE CODE [DDNRKA]1631
FAILURE CODE [DDNRKY]1633
FAILURE CODE [DDNS00]1635
FAILURE CODE [DGE5KB]1637
FAILURE CODE [DGH2KA]1638
FAILURE CODE [DGH2KB]1640
FAILURE CODE [DHA4KA]1642
FAILURE CODE [DHAAMA]1644
FAILURE CODE [DHACMA]1646
FAILURE CODE [DHPAMA]1648
FAILURE CODE [DHPBMA]1650
FAILURE CODE [DHS3MA]1652
FAILURE CODE [DHS4MA]1655
FAILURE CODE [DHS8MA]1658
FAILURE CODE [DHS9MA]1661
FAILURE CODE [DHSAMA]1664
FAILURE CODE [DHSBMA]1667
FAILURE CODE [DHSCMA]1670
FAILURE CODE [DHSDMA]1673
FAILURE CODE [DHSFMA]1676
FAILURE CODE [DHSGMA]1679
FAILURE CODE [DHSHMA]1682
FAILURE CODE [DHSJMA]1685
FAILURE CODE [DKULKA]1688
FAILURE CODE [DKULKB]1690
FAILURE CODE [DKULKY]1692
FAILURE CODE [DLM3KA]1694
FAILURE CODE [DLM3KB]1696
FAILURE CODE [DLM3MB]1698
FAILURE CODE [DR10KA]1699
FAILURE CODE [DR12KA]1702
FAILURE CODE [DR20KA]1704
FAILURE CODE [DR21KX]1706
FAILURE CODE [DR30KA]1708
FAILURE CODE [DR31KX]1710
FAILURE CODE [DR40KA]1712
FAILURE CODE [DUMBKA]1714
FAILURE CODE [DUMBKB]1716
FAILURE CODE [DV20KB]1718
FAILURE CODE [DW43KA]1719
FAILURE CODE [DW43KB]1721
FAILURE CODE [DW43KY]1723
FAILURE CODE [DW45KA]1724
FAILURE CODE [DW45KB]1727
FAILURE CODE [DW45KY]1730
FAILURE CODE [DW48KA]1732
FAILURE CODE [DW48KB]1734
FAILURE CODE [DW48KY]1736
FAILURE CODE [DW4CKY]1737
FAILURE CODE [DW4XKA]1739
FAILURE CODE [DW4XKB]1741
FAILURE CODE [DW4XKY]1743
FAILURE CODE [DW7BKA]1744
FAILURE CODE [DW7BKB]1746
FAILURE CODE [DW7BKY]1748
FAILURE CODE [DWK0KA]1749
FAILURE CODE [DWK0KB]1751
FAILURE CODE [DWK0KY]1753
FAILURE CODE [DWK2KA]1754
FAILURE CODE [DWK2KB]1756
FAILURE CODE [DWK2KY]1758
FAILURE CODE [DWK8KA]1759
FAILURE CODE [DWK8KB]1761
FAILURE CODE [DWK8KY]1763
FAILURE CODE [DX16KA]1764
FAILURE CODE [DX16KB]1766
FAILURE CODE [DXA2KA]1767
FAILURE CODE [DXA2KB]1770
FAILURE CODE [DXA3KA]1772
FAILURE CODE [DXA3KB]1775
FAILURE CODE [DY20KA]1777
FAILURE CODE [DY20MA]1779
FAILURE CODE [DY2CKB]1781
FAILURE CODE [DY2DKB]1783
FAILURE CODE [DY2EKB]1785
FAILURE CODE [DY2FMA]1787
FAILURE CODE [DY2GKM]1789
FAILURE CODE [F313KA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1791
FAILURE CODE [F313KB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1793
FAILURE CODE [F318KB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1796
FAILURE CODE [F318KY] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)1799
TROUBLESHOOTING OF ELECTRICAL SYSTEM (E-MODE)1801
E-1 ENGINE DOES NOT START (ENGINE DOES NOT CRANK)1801
E-2 MANUAL PREHEATING SYSTEM DOES NOT WORK1807
E-3 AUTOMATIC PREHEATING SYSTEM DOES NOT WORK1810
E-4 WHILE PREHEATING IS WORKING, PREHEATING MONITOR DOES NOT LIGHT UP1812
E-5 WHEN STARTING SWITCH IS TURNED TO ON POSITION, MACHINE MONITOR DISPLAYS NOTHING1814
E-6 WHILE STARTING SWITCH IS TURNED TO ON POSITION (WITH ENGINE STOPPED), ENGINE OIL LEVEL MONITOR LIGHTS UP IN YELLOW1817
E-7 WHILE STARTING SWITCH IS TURNED TO ON POSITION (WITH ENGINE STOPPED), RADIATOR COOLANT LEVEL MONITOR LIGHTS UP IN YELLOW1818
E-8 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS RUNNING1819
E-9 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS RUNNING1820
E-10 AIR CLEANER CLOGGING MONITOR LIGHTS UP IN YELLOW WHILE ENGINE IS RUNNING1821
E-11 CHARGE LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING1822
E-12 FUEL LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING1823
E-13 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING1824
E-14 ENGINE OIL PRESSURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING1825
E-15 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING1826
E-16 FUEL GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM1827
E-17 DISPLAY OF FUEL GAUGE DIFFERS FROM ACTUAL FUEL LEVEL1829
E-18 ENGINE COOLANT TEMPERATURE GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM1830
E-19 DISPLAY OF ENGINE COOLANT TEMPERATURE GAUGE DIFFERS FROM ACTUAL COOLANT TEMPERATURE1831
E-20 HYDRAULIC OIL TEMPERATURE GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM1832
E-21 DISPLAY OF HYDRAULIC OIL TEMPERATURE GAUGE DIFFERS FROM ACTUAL OIL TEMPERATURE1834
E-22 SOME AREAS OF MACHINE MONITOR SCREEN ARE NOT DISPLAYED1835
E-23 FUNCTION SWITCH DOES NOT OPERATE1836
E-24 AUTOMATIC WARM-UP SYSTEM DOES NOT WORK (IN COLD WEATHER)1837
E-25 WHEN AUTO-DECELERATOR SWITCH IS OPERATED, AUTO-DECELERATOR MONITOR DOES NOT LIGHT UP OR DOES NOT GO OFF1838
E-26 AUTO-DECELERATOR IS NOT OPERATED OR CANCELED WITH LEVER1839
E-27 WHEN WORKING MODE SWITCH IS OPERATED, WORKING MODE SELECTION SCREEN IS NOT DISPLAYED1840
E-28 WHEN WORKING MODE IS CHANGED, SETTING OF ENGINE AND HYDRAULIC PUMP IS NOT CHANGED1841
E-29 WHEN TRAVEL SPEED SWITCH IS OPERATED, TRAVEL SPEED MONITOR DOES NOT CHANGE1842
E-30 WHEN TRAVEL SPEED SELECTION IS CHANGED, ACTUAL TRAVEL SPEED DOES NOT CHANGE1843
E-31 ALARM BUZZER CANNOT BE CANCELED1844
E-32 SERVICE METER IS NOT DISPLAYED, WHILE STARTING SWITCH IS IN OFF POSITION1845
E-33 SERVICE MODE CANNOT BE SELECTED1846
E-34 ALL OF WORK EQUIPMENTS, SWING, AND TRAVEL MECHANISM DO NOT MOVE1847
E-35 ALL OF WORK EQUIPMENT, SWING, AND TRAVEL MECHANISM DO NOT LOCK1850
E-36 WHEN SWING BRAKE CANCEL SWITCH IS SET TO CANCEL POSITION, MACHINE CANNOT SWING1852
E-37 WHEN SWING BRAKE CANCEL SWITCH IS SET TO NORMAL POSITION, SWING HOLDING BRAKE DOES NOT OPERATE1855
E-38 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE PROPERLY, OR INDICATOR NOT DISPLAYED ON MONITOR1857
E-39 ONE-TOUCH POWER MAXIMIZING FUNCTION IS NOT CANCELLED1859
E-40 ALARM DOES NOT SOUND DURING TRAVEL1860
E-41 ALARM DOES NOT STOP SOUNDING WHILE MACHINE IS STOPPED1862
E-42 HORN DOES NOT SOUND1863
E-43 HORN DOES NOT STOP SOUNDING1866
E-44 WHEN WIPER SWITCH IS OPERATED, WIPER MONITOR DOES NOT LIGHT UP OR GO OFF1868
E-45 WHEN WIPER SWITCH IS OPERATED, WINDSHIELD WIPER DOES NOT OPERATE1869
E-46 WHEN WINDOW WASHER SWITCH IS OPERATED, WINDOW WASHER DOES NOT OPERATE1871
E-47 BOOM RAISE INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1872
E-48 BOOM LOWER INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1873
E-49 ARM OUT INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1874
E-50 ARM IN INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1875
E-51 BUCKET DUMP INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1876
E-52 BUCKET CURL INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1877
E-53 SWING INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1878
E-54 TRAVEL INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1879
E-55 SERVICE INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION1880
E-56 KOMTRAX SYSTEM DOES NOT OPERATE NORMALLY1882
E-57 MACHINE PUSH-UP FUNCTION CANNOT BE CANCELED1883
E-58 MACHINE PUSH-UP FUNCTION DOES NOT OPERATE1885
E-59 STEP LIGHT DOES NOT LIGHT UP1886
E-60 STEP LIGHT DOES NOT GO OUT1888
E-61 BOOM SHOCKLESS FUNCTION CANNOT BE CANCELED1890
E-62 BOOM SHOCKLESS FUNCTION DOES NOT WORK1892
E-63 ELECTRIC GREASE GUN DOES NOT WORK1893
E-64 ELECTRIC GREASE GUN DOES NOT STOP1895
TROUBLESHOOTING FOR HYDRAULIC AND MECHANICAL SYSTEMS (H MODE)1896
H-1 ALL WORK EQUIPMENT, SWING AND TRAVEL DO NOT WORK1896
H-2 ALL WORK EQUIPMENT, SWING AND TRAVEL LACK SPEED AND POWER1897
H-3 UNUSUAL NOISE IS HEARD FROM AROUND HYDRAULIC PUMP1899
H-4 ENGINE SPEED DROPS LARGELY OR ENGINE STOPS1900
H-5 TRAVEL SPEED OR POWER IS LOW1901
H-6 AUTO-DECELERATION FUNCTION CANNOT BE CANCELED1902
H-7 SPEED OR POWER OF BOOM IS LOW1903
H-8 ARM SPEED OR POWER IS LOW1905
H-9 BUCKET SPEED OR POWER IS LOW1906
H-10 WORK EQUIPMENT DOES NOT MOVE IN SINGLE OPERATION1907
H-11 HYDRAULIC DRIFT OF BOOM IS LARGE1908
H-12 HYDRAULIC DRIFT OF ARM IS LARGE1909
H-13 HYDRAULIC DRIFT OF BUCKET IS LARGE1910
H-14 TIME LAG OF WORK EQUIPMENT IS LARGE1911
H-15 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE1912
H-16 MACHINE PUSH-UP FUNCTION DOES NOT OPERATE1913
H-17 MACHINE DOES NOT TRAVEL STRAIGHT1914
H-18 SPEED OF BOOM AND BUCKET IS SLOW AT COMBINED OPERATION OF ARM, BOOM AND BUCKET1915
H-19 SPEED OF BOOM, ARM, SWING AND TRAVEL IS SLOW AT COMBINED OPERATION OF BUCKET, BOOM AND ARM1916
H-20 SWING SPEED IS SLOW AT COMBINED OPERATION OF ARM AND SWING1917
H-21 TRAVEL DEVIATION IS LARGE AT START OF TRAVELING1918
H-22 TRAVEL DEVIATION IS LARGE AT COMBINED OPERATION1920
H-23 ONE OF TRACKS DOES NOT RUN1921
H-24 TRAVEL SPEED DOES NOT CHANGE1923
H-25 UPPER STRUCTURE DOES NOT SWING BOTH TO THE RIGHT AND LEFT1924
H-26 SWINGS ONLY IN ONE DIRECTION1925
H-27 SWING ACCELERATION OR SWING SPEED IS LOW IN BOTH DIRECTIONS (RIGHT AND LEFT)1926
H-28 SWING ACCELERATION PERFORMANCE IS POOR OR SWING SPEED IS SLOW IN ONLY ONE DIRECTION1927
H-29 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (BOTH RIGHT AND LEFT)1928
H-30 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (ONLY ONE DIRECTION EITHER RIGHT OR LEFT)1929
H-31 SHOCK IS LARGE WHEN UPPER STRUCTURE STOPS SWINGING1930
H-32 LARGE UNUSUAL NOISE IS HEARD WHEN UPPER STRUCTURE STOPS SWINGING1931
H-33 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS APPLIED)1932
H-34 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS RELEASED)1933
H-35 FAN SPEED IS ABNORMAL (TOO HIGH OR LOW, OR STATIONARY)1934
H-36 UNUSUAL NOISE IS HEARD FROM AROUND FAN1935
TROUBLESHOOTING OF ENGINE (S-MODE)1936
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (S MODE)1936
S-1 ENGINE DOES NOT CRANK WHEN STARTING SWITCH IS TURNED TO START POSITION1937
S-2 ENGINE CRANKS BUT NO EXHAUST GAS COMES OUT1938
S-3 FUEL IS BEING INJECTED BUT ENGINE DOES NOT START (MISFIRING: ENGINE CRANKS BUT DOES NOT START)1939
S-4 ENGINE STARTABILITY IS POOR1940
S-5 ENGINE DOES NOT PICK UP SMOOTHLY1942
S-6 ENGINE STOPS DURING OPERATION1944
S-7 ENGINE RUNS ROUGH OR IS UNSTABLE1946
S-8 ENGINE LACKS POWER1947
S-9 KDPF GETS CLOGGED IN A SHORT TIME1949
S-10 ENGINE OIL CONSUMPTION IS EXCESSIVE1951
S-11 OIL BECOMES CONTAMINATED QUICKLY1952
S-12 FUEL CONSUMPTION IS EXCESSIVE1953
S-13 OIL IS IN COOLANT (OR COOLANT SPURTS BACK OR COOLANT LEVEL GOES DOWN)1954
S-14 OIL PRESSURE DROPS1955
S-15 FUEL MIXES INTO ENGINE OIL1957
S-16 WATER MIXES INTO ENGINE OIL (MILKY)1958
S-17 COOLANT TEMPERATURE RISES TOO HIGH (OVERHEATING)1959
S-18 UNUSUAL NOISE IS HEARD1960
S-19 VIBRATION IS EXCESSIVE1961
S-20 AIR CANNOT BE BLED FROM FUEL CIRCUIT1962
S-21 ACTIVE REGENERATION IS EXECUTED FREQUENTLY1963
S-22 ACTIVE REGENERATION TAKES TIME1965
S-23 WHITE SMOKE IS EXHAUSTED DURING ACTIVE REGENERATION1967
S-24 AdBlue/DEF CONSUMPTION IS EXCESSIVE1968
S-25 THERE IS UNUSUAL SMELL (IRRITATING ODOR)1970
S-26 FOREIGN MATERIALS ENTER AdBlue/DEF (AdBlue/DEF INCREASES)1971
50 DISASSEMBLY AND ASSEMBLY1973
CONTENTS1974
ABBREVIATION LIST1980
RELATED INFORMATION ON DISASSEMBLY AND ASSEMBLY1986
HOW TO READ THIS MANUAL1986
COATING MATERIALS LIST1988
SPECIAL TOOLS LIST1993
SKETCHES OF SPECIAL TOOLS2010
ENGINE AND COOLING SYSTEM2017
REMOVE AND INSTALL SUPPLY PUMP ASSEMBLY2017
METHOD FOR REMOVING SUPPLY PUMP ASSEMBLY2017
METHOD FOR INSTALLING SUPPLY PUMP ASSEMBLY2020
REMOVE AND INSTALL INJECTOR ASSEMBLY2025
METHOD FOR REMOVING INJECTOR ASSEMBLY2025
METHOD FOR INSTALLING INJECTOR ASSEMBLY2030
REMOVE AND INSTALL FUEL DOSER ASSEMBLY2039
METHOD FOR REMOVING FUEL DOSER ASSEMBLY2039
METHOD FOR INSTALLING FUEL DOSER ASSEMBLY2040
REMOVE AND INSTALL CYLINDER HEAD ASSEMBLY2042
METHOD FOR REMOVING CYLINDER HEAD ASSEMBLY2043
METHOD FOR INSTALLING CYLINDER HEAD ASSEMBLY2053
REMOVE AND INSTALL EGR VALVE ASSEMBLY2070
METHOD FOR REMOVING EGR VALVE ASSEMBLY2070
METHOD FOR INSTALLING EGR VALVE ASSEMBLY2072
REMOVE AND INSTALL EGR COOLER ASSEMBLY2074
METHOD FOR REMOVING EGR COOLER ASSEMBLY2074
METHOD FOR INSTALLING EGR COOLER ASSEMBLY2077
REMOVE AND INSTALL STARTER ASSEMBLY2081
METHOD FOR REMOVING STARTER ASSEMBLY2081
METHOD FOR INSTALLING STARTER ASSEMBLY2082
REMOVE AND INSTALL ALTERNATOR BELT2083
METHOD FOR REMOVING ALTERNATOR BELT2083
METHOD FOR INSTALLING ALTERNATOR BELT2084
REMOVE AND INSTALL RADIATOR ASSEMBLY2086
METHOD FOR REMOVING RADIATOR ASSEMBLY2086
METHOD FOR INSTALLING RADIATOR ASSEMBLY2089
REMOVE AND INSTALL HYDRAULIC OIL COOLER ASSEMBLY2093
METHOD FOR REMOVING HYDRAULIC OIL COOLER ASSEMBLY2093
METHOD FOR INSTALLING HYDRAULIC OIL COOLER ASSEMBLY2096
REMOVE AND INSTALL AFTERCOOLER ASSEMBLY2100
METHOD FOR REMOVING AFTERCOOLER ASSEMBLY2100
METHOD FOR INSTALLING AFTERCOOLER ASSEMBLY2102
REMOVE AND INSTALL COOLING FAN MOTOR ASSEMBLY2105
METHOD FOR REMOVING COOLING FAN MOTOR ASSEMBLY2105
METHOD FOR INSTALLING COOLING FAN MOTOR ASSEMBLY2114
REMOVE AND INSTALL ENGINE PTO AND HYDRAULIC ASSEMBLY2123
METHOD FOR REMOVING ENGINE PTO AND HYDRAULIC ASSEMBLY2123
METHOD FOR INSTALLING ENGINE PTO AND HYDRAULIC ASSEMBLY2134
REMOVE AND INSTALL ENGINE FRONT OIL SEAL2145
METHOD FOR REMOVING ENGINE FRONT OIL SEAL2145
METHOD FOR INSTALLING ENGINE FRONT OIL SEAL2146
REMOVE AND INSTALL ENGINE REAR OIL SEAL2149
METHOD FOR REMOVING ENGINE REAR OIL SEAL2149
METHOD FOR INSTALLING ENGINE REAR OIL SEAL2151
REMOVE AND INSTALL ENGINE HOOD ASSEMBLY2158
METHOD FOR REMOVING ENGINE HOOD ASSEMBLY2158
METHOD FOR INSTALLING ENGINE HOOD ASSEMBLY2163
REMOVE AND INSTALL FUEL TANK ASSEMBLY2168
METHOD FOR REMOVING FUEL TANK ASSEMBLY2168
METHOD FOR INSTALLING FUEL TANK ASSEMBLY2171
REMOVE AND INSTALL AdBlue/DEF TANK ASSEMBLY2175
METHOD FOR REMOVING AdBlue/DEF TANK ASSEMBLY2176
METHOD FOR INSTALLING AdBlue/DEF TANK ASSEMBLY2182
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR FLANGE ASSEMBLY2187
METHOD FOR REMOVING AdBlue/DEF TANK SENSOR FLANGE ASSEMBLY2187
METHOD FOR INSTALLING AdBlue/DEF TANK SENSOR FLANGE ASSEMBLY2188
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR2190
METHOD FOR REMOVING AdBlue/DEF TANK SENSOR2190
METHOD FOR INSTALLING AdBlue/DEF TANK SENSOR2191
REMOVE AND INSTALL AdBlue/DEF TANK STRAINER2197
METHOD FOR REMOVING AdBlue/DEF TANK STRAINER2197
METHOD FOR INSTALLING AdBlue/DEF TANK STRAINER2197
REMOVE AND INSTALL AdBlue/DEF TANK FILLER PORT FILTER2198
METHOD FOR REMOVING AdBlue/DEF TANK FILLER PORT FILTER2198
METHOD FOR INSTALLING AdBlue/DEF TANK FILLER PORT FILTER2200
REMOVE AND INSTALL KDPF ASSEMBLY2203
METHOD FOR REMOVING KDPF ASSEMBLY2203
METHOD FOR INSTALLING KDPF ASSEMBLY2207
DISASSEMBLE AND ASSEMBLE OF KDPF ASSEMBLY2216
METHOD FOR DISASSEMBLING KDPF ASSEMBLY2217
METHOD FOR ASSEMBLING KDPF ASSEMBLY2221
REMOVE AND INSTALL SCR ASSEMBLY2226
METHOD FOR REMOVING SCR ASSEMBLY2226
METHOD FOR INSTALLING SCR ASSEMBLY2228
REMOVE AND INSTALL KDPF, SCR ASSEMBLY2232
METHOD FOR REMOVING KDPF, SCR ASSEMBLY2233
METHOD FOR INSTALLING KDPF, SCR ASSEMBLY2239
REMOVE AND INSTALL BELLOWS PIPE ASSEMBLY2251
METHOD FOR REMOVING BELLOWS PIPE ASSEMBLY2251
METHOD FOR INSTALLING BELLOWS PIPE ASSEMBLY2253
REMOVE AND INSTALL KCCV ASSEMBLY2261
METHOD FOR REMOVING KCCV ASSEMBLY2261
METHOD FOR INSTALLING KCCV ASSEMBLY2262
REMOVE AND INSTALL AdBlue/DEF MIXING TUBE2265
METHOD FOR REMOVING AdBlue/DEF MIXING TUBE2265
METHOD FOR INSTALLING AdBlue/DEF MIXING TUBE2270
REMOVE AND INSTALL AdBlue/DEF INJECTOR2277
METHOD FOR REMOVING AdBlue/DEF INJECTOR2277
METHOD FOR INSTALLING AdBlue/DEF INJECTOR2280
REMOVE AND INSTALL AdBlue/DEF PUMP2284
METHOD FOR REMOVING AdBlue/DEF PUMP2284
METHOD FOR INSTALLING AdBlue/DEF PUMP2287
REMOVE AND INSTALL AdBlue/DEF HOSE2290
METHOD FOR REMOVING AdBlue/DEF HOSE2291
METHOD FOR INSTALLING AdBlue/DEF HOSE2299
REMOVE AND INSTALL AIR CLEANER ASSEMBLY2305
METHOD FOR REMOVING AIR CLEANER ASSEMBLY2305
METHOD FOR INSTALLING AIR CLEANER ASSEMBLY2306
REMOVE AND INSTALL AIR CONDITIONER COMPRESSOR ASSEMBLY2307
METHOD FOR REMOVING AIR CONDITIONER COMPRESSOR ASSEMBLY2307
METHOD FOR INSTALLING AIR CONDITIONER COMPRESSOR ASSEMBLY2308
REMOVE AND INSTALL AIR CONDITIONER CONDENSER ASSEMBLY2310
METHOD FOR REMOVING AIR CONDITIONER CONDENSER ASSEMBLY2310
METHOD FOR INSTALLING AIR CONDITIONER CONDENSER ASSEMBLY2311
POWER TRAIN2312
DISASSEMBLE AND ASSEMBLE PTO ASSEMBLY2312
METHOD FOR DISASSEMBLING PTO ASSEMBLY2312
METHOD FOR ASSEMBLING PTO ASSEMBLY2313
REMOVE AND INSTALL PTO ASSEMBLY2316
METHOD FOR REMOVING PTO ASSEMBLY2316
METHOD FOR INSTALLING PTO ASSEMBLY2317
REMOVE AND INSTALL TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY2320
METHOD FOR REMOVING TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY2320
METHOD FOR INSTALLING TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY2321
DISASSEMBLE AND ASSEMBLE FINAL DRIVE ASSEMBLY2322
METHOD FOR DISASSEMBLING FINAL DRIVE ASSEMBLY2323
METHOD FOR ASSEMBLING FINAL DRIVE ASSEMBLY2328
REMOVE AND INSTALL SWING MOTOR AND SWING MACHINERY ASSEMBLY2337
METHOD FOR REMOVING SWING MOTOR AND SWING MACHINERY ASSEMBLY2337
METHOD FOR INSTALLING SWING MOTOR AND SWING MACHINERY ASSEMBLY2338
DISASSEMBLE AND ASSEMBLE SWING MACHINERY ASSEMBLY2340
METHOD FOR DISASSEMBLING SWING MACHINERY ASSEMBLY2340
METHOD FOR ASSEMBLING SWING MACHINERY ASSEMBLY2344
REMOVE AND INSTALL SWING CIRCLE ASSEMBLY2349
METHOD FOR REMOVING SWING CIRCLE ASSEMBLY2349
METHOD FOR INSTALLING SWING CIRCLE ASSEMBLY2350
UNDERCARRIAGE AND FRAME2351
DISASSEMBLE AND ASSEMBLE RECOIL SPRING2351
METHOD FOR DISASSEMBLING AND ASSEMBLING RECOIL SPRING2351
METHOD FOR ASSEMNLING RECOIL SPRING ASSEMBLY2352
REMOVE AND INSTALL TRACK ROLLER ASSEMBLY2354
METHOD FOR REMOVING TRACK ROLLER ASSEMBLY2354
METHOD FOR INSTALLING TRACK ROLLER ASSEMBLY2355
REMOVE AND INSTALL CARRIER ROLLER ASSEMBLY2356
METHOD FOR REMOVING CARRIER ROLLER ASSEMBLY2356
METHOD FOR INSTALLING CARRIER ROLLER ASSEMBLY2356
DISASSEMBLE AND ASSEMBLE ONE TRACK LINK ASSEMBLY IN FIELD2358
METHOD FOR DISASSEMBLING ONE TRACK LINK ASSEMBLY IN FIELD2360
METHOD FOR ASSEMBLING ONE TRACK LINK ASSEMBLY IN FIELD2361
SEPARATION AND CONNECTION OF TRACK ASSEMBLY2364
METHOD FOR SEPARATING TRACK ASSEMBLY2364
METHOD FOR INSTALLING TRACK ASSEMBLY2365
REMOVE AND INSTALL IDLER AND IDLER CUSHION ASSEMBLY2367
METHOD FOR REMOVING IDLER AND IDLER CUSHION ASSEMBLY2367
METHOD FOR INSTALLING IDLER AND IDLER CUSHION ASSEMBLY2368
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY2369
METHOD FOR DISASSEMBLING IDLER ASSEMBLY2369
METHOD FOR ASSEMBLING IDLER ASSEMBLY2370
DISASSEMBLE AND ASSEMBLE OF IDLER CUSHION ASSEMBLY2373
METHOD FOR DISASSEMBLING IDLER CUSHION ASSEMBLY2373
METHOD FOR ASSEMBLING IDLER CUSHION ASSEMBLY2374
DISASSEMBLE AND ASSEMBLE TRACK ROLLER ASSEMBLY2376
METHOD FOR DISASSEMBLING TRACK ROLLER ASSEMBLY2376
METHOD FOR ASSEMBLING TRACK ROLLER ASSEMBLY2377
DISASSEMBLEAND ASSEMBLE CARRIER ROLLER ASSEMBLY2380
METHOD FOR DISASSEMBLING CARRIER ROLLER ASSEMBLY2380
METHOD FOR ASSEMBLING CARRIER ROLLER ASSEMBLY2381
REMOVE AND INSTALL REVOLVING FRAME ASSEMBLY2383
METHOD FOR REMOVING REVOLVING FRAME ASSEMBLY2383
METHOD FOR INSTALLING REVOLVING FRAME ASSEMBLY2384
REMOVE AND INSTALL COUNTERWEIGHT ASSEMBLY2386
METHOD FOR REMOVING COUNTERWEIGHT ASSEMBLY2386
METHOD FOR INSTALLING COUNTERWEIGHT ASSEMBLY2386
HYDRAULIC SYSTEM2389
REMOVE AND INSTALL CENTER SWIVEL JOINT ASSEMBLY2389
METHOD FOR REMOVING CENTER SWIVEL JOINT ASSEMBLY2389
METHOD FOR INSTALLING CENTER SWIVEL JOINT ASSEMBLY2390
DISASSEMBLE AND ASSEMBLE CENTER SWIVEL JOINT ASSEMBLY2391
METHOD FOR DISASSEMBLING CENTER SWIVEL JOINT ASSEMBLY2392
METHOD FOR ASSEMBLING CENTER SWIVEL JOINT ASSEMBLY2393
REMOVE AND INSTALL HYDRAULIC TANK ASSEMBLY2394
METHOD FOR REMOVING HYDRAULIC TANK ASSEMBLY2394
METHOD FOR INSTALLING HYDRAULIC TANK ASSEMBLY2396
REMOVE AND INSTALL HYDRAULIC PUMP ASSEMBLY2399
METHOD FOR REMOVING HYDRAULIC PUMP ASSEMBLY2399
METHOD FOR INSTALLING HYDRAULIC PUMP ASSEMBLY2401
REMOVE AND INSTALL CONTROL VALVE ASSEMBLY2407
METHOD FOR REMOVING CONTROL VALVE ASSEMBLY2407
METHOD FOR INSTALLING CONTROL VALVE ASSEMBLY2410
REMOVE AND INSTALL SWING MOTOR ASSEMBLY2414
METHOD FOR REMOVING SWING MOTOR ASSEMBLY2414
METHOD FOR INSTALLING SWING MOTOR ASSEMBLY2415
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT PPC VALVE ASSEMBLY2416
METHOD FOR DISASSEMBLING WORK EQUIPMENT PPC VALVE ASSEMBLY2416
METHOD FOR ASSEMBLING WORK EQUIPMENT PPC VALVE ASSEMBLY2417
DISASSEMBLE AND ASSEMBLE TRAVEL PPC VALVE ASSEMBLY2419
METHOD FOR DISASSEMBLING TRAVEL PPC VALVE ASSEMBLY2419
METHOD FOR ASSEMBLING TRAVEL PPC VALVE ASSEMBLY2420
DISASSEMBLE AND ASSEMBLE GREASE GUN ASSEMBLY2422
METHOD FOR DISASSEMBLING GREASE GUN ASSEMBLY2422
METHOD FOR ASSEMBLING GREASE GUN ASSEMBLY2422
WORK EQUIPMENT2423
REMOVE AND INSTALL BUCKET CYLINDER ASSEMBLY2423
METHOD FOR REMOVING BUCKET CYLINDER ASSEMBLY2423
METHOD FOR INSTALLING BUCKET CYLINDER ASSEMBLY2424
REMOVE AND INSTALL ARM CYLINDER ASSEMBLY2426
METHOD FOR REMOVING ARM CYLINDER ASSEMBLY2426
METHOD FOR INSTALLING ARM CYLINDER ASSEMBLY2427
REMOVE AND INSTALL BOOM CYLINDER ASSEMBLY2429
METHOD FOR REMOVING BOOM CYLINDER ASSEMBLY2429
METHOD FOR INSTALLING BOOM CYLINDER ASSEMBLY2430
REMOVE AND INSTALL BUCKET ASSEMBLY2432
METHOD FOR REMOVING BUCKET ASSEMBLY2432
METHOD FOR INSTALLING BUCKET ASSEMBLY2433
REMOVE AND INSTALL ARM ASSEMBLY2434
METHOD FOR REMOVING ARM ASSEMBLY2434
METHOD FOR INSTALLING ARM ASSEMBLY2436
REMOVE AND INSTALL BOOM ASSEMBLY2438
METHOD FOR REMOVING BOOM ASSEMBLY2438
METHOD FOR INSTALLING BOOM ASSEMBLY2439
REMOVE AND INSTALL WORK EQUIPMENT ASSEMBLY2441
METHOD FOR REMOVING WORK EQUIPMENT ASSEMBLY2441
METHOD FOR INSTALLING WORK EQUIPMENT ASSEMBLY2443
DISASSEMBLE AND ASSEMBLE ANTI-DROP VALVE ASSEMBLY2445
METHOD FOR DISASSEMBLING ANTI-DROP VALVE ASSEMBLY2445
METHOD FOR ASSEMBLING ANTI-DROP VALVE ASSEMBLY2445
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT CYLINDER ASSEMBLY2446
METHOD FOR DISASSEMBLING WORK EQUIPMENT CYLINDER ASSEMBLY2447
METHOD FOR ASSEMBLING WORK EQUIPMENT CYLINDER ASSEMBLY2449
CAB AND ITS ATTACHMENTS2454
REMOVE AND INSTALL OPERATOR’S CAB ASSEMBLY2454
METHOD FOR REMOVING OPERATOR CAB ASSEMBLY2454
METHOD FOR INSTALLING OPERATOR CAB ASSEMBLY2461
REMOVE AND INSTALL OPERATOR CAB GLASS (ADHERED GLASS)2470
METHOD FOR REMOVING OPERATOR CAB GLASS (ADHERED GLASS)2472
METHOD FOR INSTALLING OPERATOR CAB GLASS (ADHERED GLASS)2472
REMOVE AND INSTALL FRONT WINDOW ASSEMBLY2482
METHOD FOR REMOVING FRONT WINDOW ASSEMBLY2482
METHOD FOR INSTALLING FRONT WINDOW ASSEMBLY2485
REMOVE AND INSTALL FLOOR FRAME ASSEMBLY2491
METHOD FOR REMOVING FLOOR FRAME ASSEMBLY2491
METHOD FOR INSTALLING FLOOR FRAME ASSEMBLY2494
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY2499
METHOD FOR REMOVING AIR CONDITIONER UNIT ASSEMBLY2499
METHOD FOR INSTALLING AIR CONDITIONER UNIT ASSEMBLY2504
REMOVE AND INSTALL OPERATOR’S SEAT2511
METHOD FOR REMOVING OPERATOR’S SEAT2511
METHOD FOR INSTALLING OPERATOR’S SEAT2513
REMOVE AND INSTALL SEAT BELT2516
METHOD FOR REMOVING SEAT BELT2516
METHOD FOR INSTALLING SEAT BELT2516
REMOVE AND INSTALL WORK EQUIPMENT CONTROL LEVER ASSEMBLY2518
REMOVE WORK EQUIPMENT CONTROL LEVER ASSEMBLY2518
INSTALL WORK EQUIPMENT CONTROL LEVER ASSEMBLY2524
REMOVE AND INSTALL FRONT WIPER ASSEMBLY2532
METHOD FOR REMOVING FRONT WIPER ASSEMBLY2532
METHOD FOR INSTALLING FRONT WIPER ASSEMBLY2537
ELECTRICAL SYSTEM2546
REMOVE AND INSTALL ENGINE CONTROLLER ASSEMBLY2546
METHOD FOR REMOVING ENGINE CONTROLLER ASSEMBLY2546
METHOD FOR INSTALLING ENGINE CONTROLLER ASSEMBLY2547
REMOVE AND INSTALL PUMP CONTROLLER ASSEMBLY2550
METHOD FOR REMOVING PUMP CONTROLLER ASSEMBLY2550
METHOD FOR INSTALLING PUMP CONTROLLER ASSEMBLY2552
REMOVE AND INSTALL KomVision CONTROLLER ASSEMBLY2555
METHOD FOR REMOVING KomVision CONTROLLER ASSEMBLY2555
METHOD FOR INSTALLING KomVision CONTROLLER2556
REMOVE AND INSTALL MACHINE MONITOR ASSEMBLY2558
METHOD FOR REMOVING MACHINE MONITOR ASSEMBLY2558
METHOD FOR INSTALLING MACHINE MONITOR ASSEMBLY2560
REMOVE AND INSTALL MASS AIR FLOW AND TEMPERATURE SENSOR2564
METHOD FOR REMOVING MASS AIR FLOW AND TEMPERATURE SENSOR2564
METHOD FOR INSTALLING MASS AIR FLOW AND TEMPERATURE SENSOR2565
REMOVE AND INSTALL KCCV CRANKCASE PRESSURE SENSOR2566
METHOD FOR REMOVING KCCV CRANKCASE PRESSURE SENSOR2566
METHOD FOR INSTALLING KCCV CRANKCASE PRESSURE SENSOR2567
REMOVE AND INSTALL SCR TEMPERATURE SENSOR2569
METHOD FOR REMOVING SCR TEMPERATURE SENSOR2569
METHOD FOR INSTALLING SCR TEMPERATURE SENSOR2571
REMOVE AND INSTALL KomVision CAMERA2573
METHOD FOR REMOVING KomVision CAMERA2573
METHOD FOR INSTALLING KomVision CAMERA2576
REMOVE AND INSTALL KOMTRAX TERMINAL ASSEMBLY2579
METHOD FOR REMOVING KOMTRAX TERMINAL ASSEMBLY2579
METHOD FOR INSTALLING KOMTRAX TERMINAL ASSEMBLY2581
REMOVE AND INSTALL GATEWAY FUNCTION CONTROLLER ASSEMBLY2583
METHOD FOR REMOVING GATEWAY FUNCTION CONTROLLER ASSEMBLY2583
METHOD FOR INSTALLING GATEWAY FUNCTION CONTROLLER ASSEMBLY2588
REMOVE AND INSTALL COMMUNICATION TERMINAL WIRING HARNESS2593
METHOD FOR REMOVING COMMUNICATION TERMINAL WIRING HARNESS2593
METHOD FOR INSTALLING COMMUNICATION TERMINAL WIRING HARNESS2601
REMOVE AND INSTALL COMMUNICATION TERMINAL2610
REMOVE COMMUNICATION TERMINAL2610
INSTALL COMMUNICATION TERMINAL2612
60 MAINTENANCE STANDARD2615
CONTENTS2616
ABBREVIATION LIST2617
ENGINE AND COOLING SYSTEM2623
MAINTENANCE STANDARD OF ENGINE MOUNT2623
MAINTENANCE STANDARD FOR PTO2625
MAINTENANCE STANDARD OF COOLING SYSTEM2626
MAINTENANCE STANDARD OF COOLING FAN PUMP2627
MAINTENANCE STANDARD OF SERVO VALVE2628
MAINTENANCE STANDARD OF COOLING FAN MOTOR2629
POWER TRAIN2630
MAINTENANCE STANDARD OF SWING CIRCLE2630
MAINTENANCE STANDARD OF SWING MACHINERY2631
MAINTENANCE STANDARD OF FINAL DRIVE2633
MAINTENANCE STANDARD OF SPROCKET2635
MAINTENANCE STANDARD OF SPROCKET TOOTH PROFILE FULL-SCALE DRAWING2636
UNDERCARRIAGE AND FRAME2638
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION2638
MAINTENANCE STANDARD OF IDLER2640
MAINTENANCE STANDARD OF TRACK ROLLER2642
MAINTENANCE STANDARD OF CARRIER ROLLER2643
MAINTENANCE STANDARD OF TRACK SHOE2644
MAINTENANCE STANDARD OF DOUBLE SHOE2647
MAINTENANCE STANDARD OF TRIPLE SHOE2648
HYDRAULIC SYSTEM2649
MAINTENANCE STANDARD OF MAIN PUMP2649
MAINTENANCE STANDARD OF MAIN PUMP SERVO VALVE2651
MAINTENANCE STANDARD OF MAIN PUMP TVC VALVE2653
MAINTENANCE STANDARD OF MAIN PUMP CO AND NC VALVE2654
MAINTENANCE STANDARD OF SWING MOTOR2655
MAINTENANCE STANDARD OF TRAVEL MOTOR2656
MAINTENANCE STANDARD OF CONTROL VALVE2658
MAINTENANCE STANDARD OF TRAVEL SHUTTLE VALVE OF CONTROL VALVE2664
MAINTENANCE STANDARD OF VARIABLE BACK PRESSURE VALVE2665
MAINTENANCE STANDARD OF WORK EQUIPMENT AND SWING PPC VALVE2666
MAINTENANCE STANDARD OF TRAVEL PPC VALVE2669
MAINTENANCE STANDARD OF 1ST-LINE ATTACHMENT PPC VALVE2672
MAINTENANCE STANDARD OF SOLENOID VALVE2674
MAINTENANCE STANDARD OF CENTER SWIVEL JOINT2675
WORK EQUIPMENT2676
MAINTENANCE STANDARD OF WORK EQUIPMENT LINKAGE2676
DIMENSION OF ARM2681
DIMENSIONS OF BUCKET2683
MAINTENANCE STANDARD OF BOOM CYLINDER2685
MAINTENANCE STANDARD OF ARM CYLINDER2686
MAINTENANCE STANDARD OF BUCKET CYLINDER2687
80 APPENDIX2689
CONTENTS2690
ABBREVIATION LIST2692
AIR CONDITIONER SYSTEM2698
PRECAUTIONS FOR REFRIGERANT2698
AIR CONDITIONER COMPONENT2699
SPECIFICATIONS OF AIR CONDITIONER2701
CONFIGURATION AND FUNCTION OF REFRIGERATION CYCLE2702
OUTLINE OF REFRIGERATION CYCLE2703
COMPONENT PARTS OF AIR CONDITIONER SYSTEM2705
AIR CONDITIONER UNIT2705
CONFIGURATION DIAGRAM OF AIR CONDITIONER UNIT2705
FUNCTION OF AIR CONDITIONER UNIT2707
COMPONENT PARTS OF AIR CONDITIONER UNIT2709
FUNCTION OF EVAPORATOR AS AIR CONDITIONER UNIT COMPONENT2710
FUNCTION OF HEATER CORE AS AIR CONDITIONER UNIT COMPONENT2710
FUNCTION OF EVAPORATOR TEMPERATURE SENSOR AS AIR CONDITIONER UNIT COMPONENT2710
FUNCTION OF SERVO MOTOR AS AIR CONDITIONER UNIT COMPONENT2710
STRUCTURE OF EXPANSION VALVE AS AIR CONDITIONER UNIT COMPONENT2711
FUNCTION OF EXPANSION VALVE AS AIR CONDITIONER UNIT COMPONENT2711
OPERATE EXPANSION VALVE AS AIR CONDITIONER UNIT COMPONENT2711
FUNCTION OF DUAL PRESSURE SWITCH2712
AIR CONDITIONER CONTROLLER2713
STRUCTURE OF AIR CONDITIONER CONTROLLER2713
COMPRESSOR2714
STRUCTURE OF COMPRESSOR2714
SPECIFICATIONS OF COMPRESSOR2714
FUNCTION OF COMPRESSOR2714
CONDENSER2715
STRUCTURE OF CONDENSER2715
SPECIFICATIONS OF CONDENSER2715
FUNCTION OF CONDENSER2715
RECEIVER DRIER2716
STRUCTURE OF RECEIVER DRIER2716
SPECIFICATIONS OF RECEIVER DRIER2716
FUNCTION OF RECEIVER DRIER2716
SENSORS FOR AIR CONDITIONER SYSTEM2717
STRUCTURE OF SUNLIGHT SENSOR2717
FUNCTION OF SUNLIGHT SENSOR2717
STRUCTURE OF AMBIENT TEMPERATURE SENSOR2717
FUNCTION OF AMBIENT TEMPERATURE SENSOR2717
EXPLANATION OF PROCEDURE FOR TESTING AND TROUBLESHOOTING OF AIR CONDITIONER2719
CIRCUIT DIAGRAM AND ARRANGEMENT OF CONNECTOR PINS FOR AIR CONDITIONER2721
AIR CONDITIONER SYSTEM DIAGRAM2723
INPUT AND OUTPUT SIGNALS OF AIR CONDITIONER CONTROLLER2724
FUNCTION OF AIR CONDITIONER CONTROLLER2725
INSTALLATION LOCATIONS OF AIR CONDITIONER PARTS AND ARRANGEMENT OF CONNECTORS2726
TESTING AIR LEAKAGE (DUCT)2730
METHOD FOR TESTING AIR LEAKAGE (DUCT)2730
TESTING AIR CONDITIONER USING SELF-DIAGNOSIS FUNCTION2732
HOW TO OPEN THE ELECTRICAL SYSTEM ABNORMALITY RECORD SCREEN IN SERVICE MODE OF THE MACHINE MONITOR2733
TEST VENT (MODE) CHANGEOVER2734
METHOD FOR TESTING VENT (MODE) CHANGEOVER2734
TESTING FRESH/RECIRC AIR CHANGEOVER2736
METHOD FOR TESTING FRESH/RECIRC AIR CHANGEOVER2736
TEST SUNLIGHT SENSOR2737
METHOD FOR TESTING SUNLIGHT SENSOR2737
TEST (DUAL) PRESSURE SWITCH FOR REFRIGERANT2738
METHOD FOR TESTING (DUAL) PRESSURE SWITCH FOR REFRIGERANT2738
TEST RELAYS2739
METHOD FOR TESTING RELAYS2739
AIR CONDITIONER TROUBLESHOOTING CHART 12740
AIR CONDITIONER TROUBLESHOOTING CHART 22741
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE2744
FAILURE CODE [879AKA]2746
FAILURE CODE [879AKB]2747
FAILURE CODE [879BKA]2748
FAILURE CODE [879BKB]2750
FAILURE CODE [879CKA]2752
FAILURE CODE [879CKB]2753
FAILURE CODE [879DKZ]2754
FAILURE CODE [879EMC]2756
FAILURE CODE [879FMC]2757
FAILURE CODE [879GKX]2758
A-1 TROUBLESHOOTING FOR POWER SUPPLY SYSTEM (AIR CONDITIONER DOES NOT OPERATE)2760
A-2 TROUBLESHOOTING FOR COMPRESSOR AND REFRIGERANT SYSTEM (AIR IS NOT COOLED)2762
A-3 TROUBLESHOOTING FOR BLOWER MOTOR SYSTEM (NO AIR COMES OUT OR AIR FLOW IS ABNORMAL)2765
A-4 TROUBLESHOOTING FOR FRESH/RECIRC AIR CHANGEOVER2767
TROUBLESHOOTING USING GAUGE PRESSURE2769
CONNECTION OF SERVICE TOOL2772
METHOD FOR CONNECTING SERVICE TOOL2772
PRECAUTIONS FOR DISCONNECTING AND CONNECTING HOSES AND TUBES IN AIR CONDITIONER PIPINGS2774
HANDLE COMPRESSOR OIL2776
90 CIRCUIT DIAGRAMS2779
CONTENTS2780
ABBREVIATION LIST2781
HYDRAULIC CIRCUIT DIAGRAM2787
SYMBOLS USED IN HYDRAULIC CIRCUIT DIAGRAM2787
HYDRAULIC CIRCUIT DIAGRAM2791
ELECTRICAL CIRCUIT DIAGRAM2793
SYMBOLS USED IN ELECTRICAL CIRCUIT DIAGRAM2793
ELECTRICAL CIRCUIT DIAGRAM (1/12) (MACHINE WITH KOMTRAX TERMINAL)2797
ELECTRICAL CIRCUIT DIAGRAM (2/12) (MACHINE WITH KOMTRAX TERMINAL)2799
ELECTRICAL CIRCUIT DIAGRAM (3/12) (MACHINE WITH KOMTRAX TERMINAL)2801
ELECTRICAL CIRCUIT DIAGRAM (4/12) (MACHINE WITH KOMTRAX TERMINAL)2803
ELECTRICAL CIRCUIT DIAGRAM (5/12) (MACHINE WITH KOMTRAX TERMINAL)2805
ELECTRICAL CIRCUIT DIAGRAM (6/12) (MACHINE WITH KOMTRAX TERMINAL)2807
ELECTRICAL CIRCUIT DIAGRAM (7/12) (MACHINE WITH KOMTRAX TERMINAL)2809
ELECTRICAL CIRCUIT DIAGRAM (8/12) (MACHINE WITH KOMTRAX TERMINAL)2811
ELECTRICAL CIRCUIT DIAGRAM (9/12) (MACHINE WITH KOMTRAX TERMINAL)2813
ELECTRICAL CIRCUIT DIAGRAM (10/12) (MACHINE WITH KOMTRAX TERMINAL)2815
ELECTRICAL CIRCUIT DIAGRAM (11/12) (MACHINE WITH KOMTRAX TERMINAL)2817
ELECTRICAL CIRCUIT DIAGRAM (12/12) (MACHINE WITH KOMTRAX TERMINAL)2819
ELECTRICAL CIRCUIT DIAGRAM (1/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2821
ELECTRICAL CIRCUIT DIAGRAM (2/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2823
ELECTRICAL CIRCUIT DIAGRAM (3/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2825
ELECTRICAL CIRCUIT DIAGRAM (4/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2827
ELECTRICAL CIRCUIT DIAGRAM (5/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2829
ELECTRICAL CIRCUIT DIAGRAM (6/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2831
ELECTRICAL CIRCUIT DIAGRAM (7/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2833
ELECTRICAL CIRCUIT DIAGRAM (8/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2835
ELECTRICAL CIRCUIT DIAGRAM (9/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2837
ELECTRICAL CIRCUIT DIAGRAM (10/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2839
ELECTRICAL CIRCUIT DIAGRAM (11/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2841
ELECTRICAL CIRCUIT DIAGRAM (12/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2843
ELECTRICAL CIRCUIT DIAGRAM (13/13) (MACHINE WITH GATEWAY FUNCTION CONTROLLER)2845
INDEX2847

IMAGES PREVIEW OF THE MANUAL:

S.M 27/12/24