KOMATSU PC130-10M0 HYDRAULIC EXACAVATOR SHOP MANUAL SEN06852-05 – PDF DOWNLOAD

Description

KOMATSU PC130-10M0 HYDRAULIC EXCAVATOR SHOP MANUAL SEN06852-05 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

KOMATSU PC130-10M0 HYDRAULIC EXCAVATOR SHOP MANUAL SEN06852-05 – PDF DOWNLOAD

SERIAL NUMBERS 70413 and up

FOREWORD, SAFETY, BASIC INFORMATION:
• Some of the attachments and options described in this shop manual may not be available in some areas. If
they are required, consult your Komatsu distributor.
• The materials and specifications are subject to change without notice.
• Shop Manuals are available for “machine part” and “engine part”. For the engine unit, see the shop manual
for the machine which has the same engine model.
• Actual machine may differ from the images which are contained in this manual. A typical model is shown in
the illustrations of this shop manual.

TABLE OF CONTENTS:

KOMATSU PC130-10M0 HYDRAULIC EXCAVATOR SHOP MANUAL SEN06852-05 – PDF DOWNLOAD

00 INDEX AND FOREWORD 00-1
FOREWORD, SAFETY, BASIC INFORMATION 00-14
HOW TO READ THE SHOP MANUAL 00-14
SAFETY NOTICE FOR OPERATION 00-16
PRECAUTIONS TO PREVENT FIRE 00-24
ACTIONS IF FIRE OCCURS 00-25
PRECAUTIONS WHEN YOU DISPOSE OF WASTE MATERIALS 00-26
PRECAUTIONS FOR HANDLING HYDRAULIC EQUIPMENT 00-27
PRECAUTIONS WHEN YOU DISCONNECT AND CONNECT PIPINGS 00-30
PRECAUTIONS WHEN YOU HANDLE ELECTRICAL EQUIPMENT 00-37
PRECAUTIONS FOR HANDLING FUEL SYSTEM EQUIPMENT 00-39
PRECAUTIONS FOR HANDLING INTAKE SYSTEM EQUIPMENT 00-40
PRACTICAL USE OF KOMTRAX 00-41
DISCONNECT AND CONNECT PUSH-PULL TYPE COUPLER 00-42
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF CONNECTORS 00-46
METHOD FOR DISCONNECTING AND CONNECTING DEUTSCH CONNECTOR 00-50
METHOD FOR DISCONNECTING AND CONNECTING SLIDE LOCK TYPE CONNECTOR 00-51
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PULL 00-53
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PUSH 00-54
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH HOUSING TO ROTATE
00-56
HOW TO READ ELECTRICAL WIRE CODE 00-57
EXPLANATION OF TERMS FOR MAINTENANCE STANDARD 00-61
STANDARD TIGHTENING TORQUE TABLE 00-64
CONVERSION TABLE 00-71
ABBREVIATION LIST 00-76
01 SPECIFICATIONS 01-1
CONTENTS 01-2
SPECIFICATIONS 01-3
SPECIFICATION DRAWING 01-3
WORKING RANGE DRAWINGS 01-5
SPECIFICATIONS 01-6
WEIGHT TABLE 01-10
FUEL, COOLANT, LUBRICANT 01-12
10 STRUCTURE AND FUNCTION 10-1
CONTENTS 10-2
BOOT-UP SYSTEM 10-5
LAYOUT DRAWING OF BOOT-UP SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 10-5
LAYOUT DRAWING OF BOOT-UP SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER)
10-6
SYSTEM OPERATING LAMP SYSTEM 10-7
BATTERY DISCONNECT SWITCH 10-10
ENGINE SYSTEM 10-11
LAYOUT DRAWING OF ENGINE SYSTEM10-11
ENGINE CONTROL SYSTEM 10-12
AUTO-DECELERATION SYSTEM 10-16
ENGINE AUTOMATIC WARM-UP SYSTEM 10-18
OVERHEAT PREVENTION SYSTEM 10-20
TURBOCHARGER PROTECTION SYSTEM 10-22
COMPONENT PARTS OF ENGINE SYSTEM 10-23
COOLING SYSTEM 10-24
LAYOUT DRAWING OF COOLING SYSTEM 10-24
CONTROL SYSTEM 10-26
LAYOUT DRAWING OF CONTROL SYSTEM (MACHINE WITH KOMTRAX TERMINAL) 10-26
LAYOUT DRAWING OF CONTROL SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER)
10-28
INDEX 00 INDEX AND FOREWORD
00-2 PC130-10M0
MACHINE MONITOR SYSTEM 10-30
KOMTRAX SYSTEM 10-33
COMPONENT PARTS OF CONTROL SYSTEM 10-35
HYDRAULIC SYSTEM 10-69
LAYOUT DRAWING OF HYDRAULIC SYSTEM 10-69
CLSS 10-71
ENGINE AND PUMP COMBINED CONTROL SYSTEM 10-74
COMPONENT PARTS OF HYDRAULIC SYSTEM 10-80
WORK EQUIPMENT SYSTEM 10-167
LAYOUT DRAWING OF WORK EQUIPMENT SYSTEM 10-167
STRUCTURE OF VALVE CONTROL10-170
PPC LOCK SYSTEM 10-171
ONE-TOUCH POWER MAXIMIZING SYSTEM 10-172
OIL FLOW ADJUSTER SYSTEM FOR ATTACHMENT10-173
COMPONENT PARTS OF WORK EQUIPMENT SYSTEM10-175
SWING SYSTEM 10-195
LAYOUT DRAWING OF SWING SYSTEM 10-195
SWING CONTROL SYSTEM DIAGRAM 10-197
COMPONENT PARTS OF SWING SYSTEM10-200
TRAVEL SYSTEM10-211
LAYOUT DRAWING OF TRAVEL SYSTEM 10-211
SYSTEM DIAGRAM OF TRAVEL CONTROL SYSTEM10-213
COMPONENT PARTS OF TRAVEL SYSTEM 10-217
UNDERCARRIAGE AND FRAME10-234
LAYOUT DRAWING OF UNDERCARRIAGE 10-234
IDLER CUSHION10-235
WORK EQUIPMENT10-236
STRUCTURE OF WORK EQUIPMENT 10-236
FUNCTION OF WORK EQUIPMENT 10-237
WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM10-238
BUCKET CLEARANCE ADJUSTMENT SHIM 10-239
CAB AND ITS ATTACHMENTS 10-240
ROPS CAB 10-240
CAB MOUNT 10-242
CAB TIPPING STOPPER 10-244
20 STANDARD VALUE TABLE 20-1
CONTENTS 20-2
STANDARD VALUE TABLE FOR ENGINE 20-3
STANDARD VALUE TABLE FOR ENGINE: PC130-10M0 20-3
STANDARD VALUE TABLE FOR MACHINE 20-6
STANDARD VALUE TABLE FOR MACHINE: PC130-10M0 20-6
MACHINE POSTURE AND PROCEDURES TO MEASURE PERFORMANCE 20-20
30 TESTING AND ADJUSTING 30-1
CONTENTS 30-2
RELATED INFORMATION ON TESTING AND ADJUSTING 30-5
TOOLS FOR TESTING AND ADJUSTING 30-5
SKETCH OF TOOLS FOR TESTING AND ADJUSTING 30-9
ENGINE AND COOLING SYSTEM30-11
TEST ENGINE SPEED 30-11
TEST EXHAUST GAS COLOR 30-13
TEST AND ADJUST VALVE CLEARANCE 30-15
TEST COMPRESSION PRESSURE 30-18
TEST BLOWBY PRESSURE 30-20
TEST ENGINE OIL PRESSURE 30-22
TEST FUEL PRESSURE 30-24
TEST FUEL RETURN RATE AND LEAKAGE 30-25
BLEED AIR FROM FUEL SYSTEM 30-30
TEST FUEL CIRCUIT FOR LEAKAGE 30-32
00 INDEX AND FOREWORD INDEX
PC130-10M0 00-3
HANDLE CYLINDER CUT-OUT MODE OPERATION 30-34
HANDLE NO-INJECTION CRANKING OPERATION 30-35
TEST AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION 30-36
TEST AND ADJUST FAN BELT TENSION 30-38
POWER TRAIN 30-40
TEST SWING CIRCLE BEARING CLEARANCE 30-40
UNDERCARRIAGE AND FRAME 30-41
TEST AND ADJUST TRACK TENSION 30-41
HYDRAULIC SYSTEM 30-43
RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM 30-43
TEST AND ADJUST OIL PRESSURE IN WORK EQUIPMENT, SWING, TRAVEL, AND BLADE CIRCUITS
30-45
TEST OIL PRESSURE OF CONTROL CIRCUIT 30-55
TEST AND ADJUST OIL PRESSURE IN PUMP PC CONTROL CIRCUIT 30-57
TEST AND ADJUST OIL PRESSURE IN PUMP LS CONTROL CIRCUIT 30-60
TEST OUTLET PRESSURE OF SOLENOID VALVE 30-66
TEST OUTLET PRESSURE IN PPC VALVE 30-71
ADJUST WORK EQUIPMENT AND SWING PPC VALVES 30-73
TEST AND ADJUST TRAVEL DEVIATION 30-74
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT 30-77
TEST OIL LEAKAGE 30-79
BLEED AIR FROM HYDRAULIC CIRCUIT 30-83
CAB RELATED PARTS 30-87
TEST CAB TIPPING STOPPER 30-87
ADJUST MIRRORS 30-88
ELECTRICAL SYSTEM 30-96
SET AND OPERATE MACHINE MONITOR 30-96
START UP KOMTRAX TERMINAL (MACHINE WITH KOMTRAX TERMINAL) 30-154
STOP USING OF KOMTRAX TERMINAL (MACHINE WITH KOMTRAX TERMINAL)30-159
START UP KOMTRAX SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER)30-161
STOP USING OF KOMTRAX SYSTEM (MACHINE WITH GATEWAY FUNCTION CONTROLLER)
30-167
ADJUST REARVIEW CAMERA ANGLE 30-169
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER 30-171
BATTERY DISCONNECT SWITCH (MACHINE WITH KOMTRAX TERMINAL)30-172
BATTERY DISCONNECT SWITCH (MACHINE WITH GATEWAY FUNCTION CONTROLLER)30-173
TEST DIODES 30-174
Pm-CLINIC 30-175
Pm CLINIC SERVICE 30-175
40 TROUBLESHOOTING 40-1
CONTENTS 40-2
RELATED INFORMATION ON TROUBLESHOOTING 40-8
GENERAL TROUBLESHOOTING POINTS 40-8
SEQUENCE OF EVENTS IN TROUBLESHOOTING 40-9
CHECKS BEFORE TROUBLESHOOTING40-11
INSPECTION PROCEDURE BEFORE TROUBLESHOOTING 40-13
TESTING IN ACCORDANCE WITH TESTING PROCEDURE 40-15
PREPARATION FOR TROUBLESHOOTING OF ELECTRICAL SYSTEM 40-37
PROCEDURE FOR TESTING AND TROUBLESHOOTING 40-43
SYMPTOM AND TROUBLESHOOTING NUMBERS 40-46
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 40-50
TROUBLESHOOTING METHOD FOR OPEN CIRCUIT IN WIRING HARNESS OF PRESSURE SENSOR
SYSTEM 40-52
CONNECTOR LIST AND LAYOUT (MACHINES WITHOUT FUEL REFILL PUMP) 40-55
CONNECTOR LIST AND LAYOUT (MACHINES WITHOUT FUEL REFILL PUMP) 40-66
CONNECTOR CONTACT IDENTIFICATION 40-78
T-BRANCH BOX AND T-BRANCH ADAPTER TABLE 40-120
FUSE LOCATION TABLE (MACHINES WITHOUT FUEL REFILL PUMP) 40-126
INDEX 00 INDEX AND FOREWORD
00-4 PC130-10M0
FUSE LOCATION TABLE (MACHINES WITH FUEL REFILL PUMP) 40-128
FAILURE CODE TABLE40-130
TROUBLESHOOTING BY FAILURE CODE (DISPLAY OF CODE) 40-137
FAILURE CODE [879AKA]40-137
FAILURE CODE [879AKB]40-138
FAILURE CODE [879BKA]40-139
FAILURE CODE [879BKB]40-141
FAILURE CODE [879CKA]40-143
FAILURE CODE [879CKB]40-144
FAILURE CODE [879DKZ]40-145
FAILURE CODE [879EMC] 40-147
FAILURE CODE [879FMC] 40-148
FAILURE CODE [879GKX] 40-149
FAILURE CODE [989L00] 40-151
FAILURE CODE [989M00] 40-152
FAILURE CODE [989N00] 40-153
FAILURE CODE [AA10NX] 40-154
FAILURE CODE [AB00KE] 40-156
FAILURE CODE [B@BAZG] 40-158
FAILURE CODE [B@BAZK]40-159
FAILURE CODE [B@BCNS] 40-161
FAILURE CODE [B@BCQA]40-162
FAILURE CODE [B@BCZK] 40-164
FAILURE CODE [B@HANS] 40-166
FAILURE CODE [CA111] 40-168
FAILURE CODE [CA122]40-174
FAILURE CODE [CA123]40-176
FAILURE CODE [CA131]40-177
FAILURE CODE [CA132]40-179
FAILURE CODE [CA144]40-180
FAILURE CODE [CA145]40-182
FAILURE CODE [CA153]40-183
FAILURE CODE [CA154]40-185
FAILURE CODE [CA221]40-186
FAILURE CODE [CA222]40-188
FAILURE CODE [CA234]40-189
FAILURE CODE [CA238]40-190
FAILURE CODE [CA271]40-192
FAILURE CODE [CA272]40-193
FAILURE CODE [CA322]40-194
FAILURE CODE [CA324]40-196
FAILURE CODE [CA331]40-198
FAILURE CODE [CA332]40-200
FAILURE CODE [CA351]40-202
FAILURE CODE [CA352]40-206
FAILURE CODE [CA386]40-207
FAILURE CODE [CA435]40-209
FAILURE CODE [CA441]40-210
FAILURE CODE [CA442]40-211
FAILURE CODE [CA449]40-212
FAILURE CODE [CA451]40-213
FAILURE CODE [CA452]40-215
FAILURE CODE [CA553]40-216
FAILURE CODE [CA559]40-217
FAILURE CODE [CA689]40-221
FAILURE CODE [CA731]40-223
FAILURE CODE [CA757]40-224
FAILURE CODE [CA778]40-230
00 INDEX AND FOREWORD INDEX
PC130-10M0 00-5
FAILURE CODE [CA2185] 40-232
FAILURE CODE [CA2186] 40-234
FAILURE CODE [CA2249] 40-235
FAILURE CODE [CA2311] 40-236
FAILURE CODE [D110KB]40-237
FAILURE CODE [D19JKZ] 40-239
FAILURE CODE [D811MC] (MACHINE WITH KOMTRAX TERMINAL) 40-241
FAILURE CODE [D811MC] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-242
FAILURE CODE [D862KA] (MACHINE WITH KOMTRAX TERMINAL)40-243
FAILURE CODE [D862KA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)40-244
FAILURE CODE [D8ALKA] (MACHINE WITH KOMTRAX TERMINAL) 40-245
FAILURE CODE [D8ALKA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-247
FAILURE CODE [D8ALKB] (MACHINE WITH KOMTRAX TERMINAL) 40-250
FAILURE CODE [D8ALKB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-252
FAILURE CODE [D8AQKR] (MACHINE WITH KOMTRAX TERMINAL) 40-254
FAILURE CODE [D8AQKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-257
FAILURE CODE [D8G1KT] 40-263
FAILURE CODE [D8G6KT] 40-264
FAILURE CODE [DA20MC] 40-265
FAILURE CODE [DA22KK] 40-266
FAILURE CODE [DA25KP] 40-268
FAILURE CODE [DA26KP] 40-270
FAILURE CODE [DA29KQ]40-273
FAILURE CODE [DA2LKA] (MACHINE WITH KOMTRAX TERMINAL) 40-275
FAILURE CODE [DA2LKA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-277
FAILURE CODE [DA2LKB] (MACHINE WITH KOMTRAX TERMINAL) 40-280
FAILURE CODE [DA2LKB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-282
FAILURE CODE [DA2QKR] (MACHINE WITH KOMTRAX TERMINAL) 40-284
FAILURE CODE [DA2QKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-289
FAILURE CODE [DA2RKR] (MACHINE WITH KOMTRAX TERMINAL)40-295
FAILURE CODE [DA2RKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)40-300
FAILURE CODE [DAF0MB] 40-306
FAILURE CODE [DAF0MC] 40-307
FAILURE CODE [DAF8KB] 40-308
FAILURE CODE [DAF9KQ]40-310
FAILURE CODE [DAFGMC] (MACHINE WITH KOMTRAX TERMINAL)40-311
FAILURE CODE [DAFGMC] (MACHINE WITH GATEWAY FUNCTION CONTROLLER)40-312
FAILURE CODE [DAFLKA] (MACHINE WITH KOMTRAX TERMINAL) 40-313
FAILURE CODE [DAFLKA] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-315
FAILURE CODE [DAFLKB] (MACHINE WITH KOMTRAX TERMINAL) 40-318
FAILURE CODE [DAFLKB] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-320
FAILURE CODE [DAFQKR] (MACHINE WITH KOMTRAX TERMINAL) 40-322
FAILURE CODE [DAFQKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-326
FAILURE CODE [DAZ9KQ]40-331
FAILURE CODE [DAZQKR] (MACHINE WITH KOMTRAX TERMINAL) 40-332
FAILURE CODE [DAZQKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-335
FAILURE CODE [DB2QKR] (MACHINE WITH KOMTRAX TERMINAL) 40-341
FAILURE CODE [DB2QKR] (MACHINE WITH GATEWAY FUNCTION CONTROLLER) 40-346
FAILURE CODE [DGH2KA] 40-352
FAILURE CODE [DGH2KB] 40-354
FAILURE CODE [DHA4KA]40-356
FAILURE CODE [DHE5MA] 40-358
FAILURE CODE [DHPAMA]40-362
FAILURE CODE [DHS3MA] 40-364
FAILURE CODE [DHS4MA] 40-366
FAILURE CODE [DHS8MA] 40-368
FAILURE CODE [DHS9MA] 40-370
FAILURE CODE [DHSAMA]40-372
INDEX 00 INDEX AND FOREWORD
00-6 PC130-10M0
FAILURE CODE [DHSBMA]40-374
FAILURE CODE [DHSCMA] 40-376
FAILURE CODE [DHSDMA] 40-378
FAILURE CODE [DHSFMA]40-380
FAILURE CODE [DHSGMA] 40-382
FAILURE CODE [DHSHMA] 40-384
FAILURE CODE [DHSJMA] 40-386
FAILURE CODE [DHSKMA]40-388
FAILURE CODE [DHSLMA] 40-390
FAILURE CODE [DJG1KX] 40-392
FAILURE CODE [DKR2MA] 40-396
FAILURE CODE [DKR2NX] 40-400
FAILURE CODE [DV20KB] 40-403
FAILURE CODE [DW43KA] 40-405
FAILURE CODE [DW43KB] 40-407
FAILURE CODE [DW43KY] 40-409
FAILURE CODE [DW45KA] 40-410
FAILURE CODE [DW45KB] 40-413
FAILURE CODE [DW45KY] 40-416
FAILURE CODE [DW91KA] 40-418
FAILURE CODE [DW91KB] 40-420
FAILURE CODE [DW91KY] 40-422
FAILURE CODE [DWA2KA] 40-424
FAILURE CODE [DWA2KB] 40-426
FAILURE CODE [DWA2KY] 40-428
FAILURE CODE [DWJ0KA] 40-430
FAILURE CODE [DWJ0KB] 40-432
FAILURE CODE [DWJ0KY] 40-434
FAILURE CODE [DWK0KA]40-436
FAILURE CODE [DWK0KB]40-438
FAILURE CODE [DWK0KY]40-440
FAILURE CODE [DWK2KA]40-442
FAILURE CODE [DWK2KB]40-444
FAILURE CODE [DWK2KY]40-446
FAILURE CODE [DWNSKA] 40-448
FAILURE CODE [DWNSKB] 40-450
FAILURE CODE [DWNSKY] 40-452
FAILURE CODE [DXA8KA]40-453
FAILURE CODE [DXA8KB]40-455
FAILURE CODE [DXE4KA]40-457
FAILURE CODE [DXE4KB]40-459
FAILURE CODE [DXE4KY]40-461
FAILURE CODE [DY20KA] 40-463
FAILURE CODE [DY20MA]40-465
FAILURE CODE [DY2CKB]40-467
FAILURE CODE [DY2DKB]40-469
FAILURE CODE [DY2EKB]40-471
FAILURE CODE [F@BBZL] 40-473
FAILURE CODE [F313KA] 40-476
FAILURE CODE [F313KB] 40-478
FAILURE CODE [F318KB] 40-479
FAILURE CODE [F318KY] 40-481
TROUBLESHOOTING OF ELECTRICAL SYSTEM (E-MODE) 40-482
E-1 ENGINE DOES NOT START (ENGINE DOES NOT CRANK) 40-482
E-2 MANUAL PREHEATING SYSTEM DOES NOT WORK40-493
E-3 WHILE PREHEATING IS IN OPERATION, PREHEATING MONITOR DOES NOT LIGHT UP
40-497
00 INDEX AND FOREWORD INDEX
PC130-10M0 00-7
E-4 WHEN STARTING SWITCH IS TURNED TO ON POSITION, MACHINE MONITOR SHOWS
NOTHING40-500
E-5 WHILE ENGINE IS IN OPERATION, ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP
IN WHITE 40-505
E-6 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS IN OPERATION
40-506
E-7 AIR CLEANER CLOGGING MONITOR LIGHTS UP IN YELLOW WHILE ENGINE IS IN OPERATION
40-507
E-8 CHARGE LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS IN OPERATION40-508
E-9 FUEL LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS IN OPERATION 40-509
E-10 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS IN OPERATION
40-510
E-11 ENGINE OIL PRESSURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS IN OPERATION
40-511
E-12 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS IN OPERATION
40-512
E-13 FUEL GAUGE DOES NOT MOVE FROM MINIMUM OR MAXIMUM 40-513
E-14 FUEL GAUGE DOES NOT SHOW CORRECT FUEL LEVEL40-515
E-15 COOLANT TEMPERATURE GAUGE DOES NOT MOVE FROM MINIMUM OR MAXIMUM40-516
E-16 COOLANT TEMPERATURE GAUGE DOES NOT SHOW CORRECT TEMPERATURE40-517
E-17 HYDRAULIC OIL TEMPERATURE GAUGE DOES NOT MOVE FROM MINIMUM OR MAXIMUM
40-518
E-18 HYDRAULIC OIL TEMPERATURE GAUGE DOES NOT SHOW CORRECT TEMPERATURE
40-520
E-19 SOME AREAS OF MACHINE MONITOR SCREEN ARE NOT SHOWN 40-521
E-20 FUNCTION SWITCH DOES NOT OPERATE 40-522
E-21 AUTOMATIC WARM-UP SYSTEM DOES NOT OPERATE (IN COLD WEATHER) 40-523
E-22 AUTO-DECELERATION MONITOR DOES NOT LIGHT UP OR GO OUT WHILE AUTO-DECELERATION
SWITCH IS OPERATED 40-524
E-23 AUTO-DECELERATION DOES NOT OPERATE OR IS NOT CANCELLED TO MEET LEVER
OPERATION 40-525
E-24 WORK MODE SELECTOR SCREEN IS NOT SHOWN WHILE WORK MODE SWITCH IS OPERATED
40-526
E-25 ENGINE AND HYDRAULIC PUMP SETTINGS DO NOT CHANGE WHILE WORK MODE IS
CHANGED 40-527
E-26 TRAVEL SPEED MONITOR DOES NOT CHANGE WHILE TRAVEL SPEED SWITCH IS OPERATED
40-528
E-27 TRAVEL SPEED DOES NOT CHANGE EVEN WHEN YOU OPERATE THE OPERATION TO
CHANGE TRAVEL SPEED 40-529
E-28 ALARM BUZZER CANNOT BE STOPPED 40-530
E-29 SERVICE METER IS NOT SHOWN WHILE STARTING SWITCH IS IN OFF POSITION40-531
E-30 MACHINE DOES NOT CHANGE TO SERVICE MODE40-532
E-31 ALL WORK EQUIPMENT, SWING OR TRAVEL DOES NOT OPERATE40-533
E-32 ALL WORK EQUIPMENT, SWING OR TRAVEL DOES NOT LOCK40-537
E-33 MACHINE DOES NOT SWING WHILE SWING PARKING BRAKE RELEASE SWITCH IS RELEASED
40-539
E-34 WHILE SWING PARKING BRAKE RELEASE SWITCH IS TURNED ON, SWING BRAKE IS NOT
OPERATED40-541
E-35 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE NORMALLY OR MONITOR
DOES NOT DISPLAY40-543
E-36 ONE-TOUCH POWER MAXIMIZING FUNCTION IS NOT RELEASED40-547
E-37 TRAVEL ALARM DOES NOT OPERATE DURING TRAVEL 40-549
E-38 TRAVEL ALARM DOES NOT STOP WHEN MACHINE STOPS40-551
E-39 HORN DOES NOT MAKE SOUND40-552
E-40 HORN DOES NOT STOP40-554
E-41 WIPER MONITOR DOES NOT LIGHT UP OR GO OUT WHILE WIPER SWITCH IS OPERATED
40-555
E-42 WIPER DOES NOT OPERATE WHEN WIPER SWITCH IS OPERATED40-556
INDEX 00 INDEX AND FOREWORD
00-8 PC130-10M0
E-43 WINDOW WASHER DOES NOT OPERATE WHEN WINDOW WASHER SWITCH IS OPERATED
40-558
E-44 “BOOM RAISE” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION40-559
E-45 “BOOM LOWER” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-560
E-46 “ARM DUMP” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION40-561
E-47 “ARM IN” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-562
E-48 “BUCKET DUMP” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-563
E-49 “BUCKET CURL” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-564
E-50 “SWING” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION40-565
E-51 “TRAVEL” IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-566
E-52 SERVICE IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION40-567
E-53 BLADE RAISE IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION 40-570
E-54 BLADE LOWER IS NOT SHOWN CORRECTLY WITH MONITORING FUNCTION40-571
E-55 KOMTRAX SYSTEM DOES NOT OPERATE CORRECTLY40-572
TROUBLESHOOTING FOR HYDRAULIC AND MECHANICAL SYSTEMS (H MODE) 40-573
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (H MODE)40-573
FAILURE MODE AND CAUSE TABLE40-574
H-1 ALL WORK EQUIPMENT, SWING AND TRAVEL DO NOT WORK40-584
H-2 All WORK EQUIPMENT, SWING, AND TRAVEL SPEED IS LOW OR POWER IS LOW 40-585
H-3 FINE CONTROL PERFORMANCE OR RESPONSE IS UNSATISFACTORY 40-587
H-4 THERE IS UNUSUAL NOISE FROM AROUND HYDRAULIC PUMP40-588
H-5 ENGINE SPEED FALLS LARGELY OR ENGINE STOPS 40-589
H-6 BOOM SPEED OR POWER IS LOW 40-591
H-7 ARM SPEED IS LOW OR POWER IS LOW40-594
H-8 BUCKET SPEED OR POWER IS LOW40-597
H-9 BLADE SPEED OR POWER IS LOW 40-600
H-10 WORK EQUIPMENT DOES NOT MOVE IN SINGLE OPERATION 40-602
H-11 HYDRAULIC DRIFT OF BOOM IS LARGE 40-603
H-12 HYDRAULIC DRIFT OF ARM IS LARGE 40-604
H-13 HYDRAULIC DRIFT OF BUCKET IS LARGE40-605
H-14 HYDRAULIC DRIFT OF BLADE IS LARGE 40-606
H-15 WHEN SINGLE WORK EQUIPMENT IS RELIEVED HYDRAULICALLY, OTHER WORK EQUIPMENT
MOVES 40-608
H-16 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE 40-609
H-17 TIME LAG OF WORK EQUIPMENT IS LARGE 40-611
H-18 ATTACHMENT CIRCUIT CANNOT BE CHANGED40-612
H-19 OIL FLOW IN ATTACHMENT CIRCUIT CANNOT BE CHANGED 40-613
H-20 IN COMBINED OPERATION OF WORK EQUIPMENT, WORK EQUIPMENT WITH HEAVIER
LOAD MOVES SLOWER 40-614
H-21 IN COMBINATION OPERATION OF SWING AND TRAVEL, TRAVEL SPEED FALLS LARGELY
40-615
H-22 IN COMBINATION OPERATION OF SWING AND BOOM RAISE, BOOM RAISE SPEED IS LOW
40-616
H-23 MACHINE DOES NOT TRAVEL STRAIGHT 40-617
H-24 MACHINE IS NOT STEERED WELL OR STEERING POWER IS LOW40-620
H-25 TRAVEL SPEED IS SLOW40-623
H-26 ONE OF TRACKS DOES NOT RUN 40-625
H-27 TRAVEL SPEED DOES NOT CHANGE, OR TRAVEL SPEED IS TOO SLOW OR FAST 40-627
H-28 MACHINE DOES NOT SWING TO RIGHT OR LEFT40-628
H-29 SWINGS ONLY IN ONE DIRECTION40-629
H-30 SWING ACCELERATION OR SWING SPEED IS LOW IN TWO DIRECTIONS OF RIGHT AND
LEFT 40-630
H-31 SWING ACCELERATION OR SWING SPEED IS LOW IN ONLY ONE DIRECTION 40-631
H-32 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWING OPERATION
(RIGHT AND LEFT)40-632
H-33 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWING OPERATION
(ONLY ONE DIRECTION) 40-633
H-34 SHOCK IS LARGE WHEN UPPER STRUCTURE STOPS SWING OPERATION 40-634
00 INDEX AND FOREWORD INDEX
PC130-10M0 00-9
H-35 THERE IS A LARGE UNUSUAL NOISE WHEN UPPER STRUCTURE STOPS SWING OPERATION
40-635
H-36 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS APPLIED)40-636
H-37 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS RELEASED)
40-637
50 DISASSEMBLY AND ASSEMBLY 50-1
CONTENTS 50-2
RELATED INFORMATION ON DISASSEMBLY AND ASSEMBLY 50-6
HOW TO READ THIS MANUAL 50-6
COATING MATERIALS LIST 50-8
SPECIAL TOOLS LIST 50-12
SKETCHES OF SPECIAL TOOLS 50-26
PREPARATION 50-28
DRAIN AND ADD COOLANT 50-28
DRAIN AND ADD HYDRAULIC OIL 50-31
DRAIN AND ADD FUEL 50-34
COLLECT AND REFILL REFRIGERANT 50-36
ENGINE AND COOLING SYSTEM 50-38
REMOVE AND INSTALL SUPPLY PUMP ASSEMBLY 50-38
REMOVE AND INSTALL INJECTOR ASSEMBLY 50-48
REMOVE AND INSTALL CYLINDER HEAD ASSEMBLY 50-56
REMOVE AND INSTALL STARTING MOTOR ASSEMBLY 50-80
REMOVE AND INSTALL FAN BELT 50-83
REMOVE AND INSTALL RADIATOR ASSEMBLY 50-87
REMOVE AND INSTALL HYDRAULIC OIL COOLER ASSEMBLY 50-95
REMOVE AND INSTALL AFTERCOOLER ASSEMBLY50-105
REMOVE AND INSTALL ENGINE AND MAIN PUMP ASSEMBLY 50-113
REMOVE AND INSTALL ENGINE FRONT OIL SEAL 50-154
REMOVE AND INSTALL ENGINE REAR OIL SEAL50-158
REMOVE AND INSTALL FUEL COOLER ASSEMBLY 50-163
REMOVE AND INSTALL ENGINE HOOD ASSEMBLY 50-166
REMOVE AND INSTALL FUEL TANK ASSEMBLY50-169
REMOVE AND INSTALL AIR CLEANER ASSEMBLY50-177
REMOVE AND INSTALL AIR CONDITIONER COMPRESSOR ASSEMBLY 50-183
REMOVE AND INSTALL AIR CONDITIONER CONDENSER ASSEMBLY 50-188
POWER TRAIN 50-192
REMOVE AND INSTALL TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY 50-192
DISASSEMBLE AND ASSEMBLE TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY50-197
REMOVE AND INSTALL SWING MOTOR AND SWING MACHINERY ASSEMBLY50-248
DISASSEMBLE AND ASSEMBLE SWING MACHINERY ASSEMBLY 50-254
REMOVE AND INSTALL SWING CIRCLE ASSEMBLY 50-264
UNDERCARRIAGE AND FRAME50-266
SEPARATE AND INSTALL TRACK ASSEMBLY 50-266
REMOVE AND INSTALL SPROCKET 50-272
REMOVE AND INSTALL IDLER AND IDLER CUSHION ASSEMBLY50-274
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY 50-276
DISASSEMBLE AND ASSEMBLE IDLER CUSHION ASSEMBLY50-280
DISASSEMBLE AND ASSEMBLE TRACK ROLLER ASSEMBLY 50-284
REMOVE AND INSTALL REVOLVING FRAME ASSEMBLY 50-287
REMOVE AND INSTALL COUNTERWEIGHT ASSEMBLY50-298
HYDRAULIC SYSTEM50-303
REMOVE AND INSTALL CENTER SWIVEL JOINT ASSEMBLY 50-303
DISASSEMBLE AND ASSEMBLE CENTER SWIVEL JOINT ASSEMBLY 50-313
REMOVE AND INSTALL HYDRAULIC TANK ASSEMBLY50-316
REMOVE AND INSTALL MAIN PUMP ASSEMBLY 50-336
REMOVE AND INSTALL CONTROL VALVE ASSEMBLY 50-350
DISASSEMBLE AND ASSEMBLE CONTROL VALVE ASSEMBLY 50-380
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT PPC VALVE ASSEMBLY 50-385
INDEX 00 INDEX AND FOREWORD
00-10 PC130-10M0
DISASSEMBLE AND ASSEMBLE TRAVEL PPC VALVE ASSEMBLY 50-387
WORK EQUIPMENT50-390
REMOVE AND INSTALL BLADE ASSEMBLY 50-390
REMOVE AND INSTALL WORK EQUIPMENT ASSEMBLY 50-394
DISASSEMBLE AND ASSEMBLE BUCKET CYLINDER ASSEMBLY 50-403
DISASSEMBLE AND ASSEMBLE BOOM CYLINDER ASSEMBLY50-410
DISASSEMBLE AND ASSEMBLE ARM CYLINDER ASSEMBLY50-417
DISASSEMBLE AND ASSEMBLE BLADE CYLINDER ASSEMBLY 50-425
DISASSEMBLE AND ASSEMBLE OIL PASSAGE INTEGRATED CYLINDER ASSEMBLY 50-433
CAB RELATED PARTS50-441
REMOVE AND INSTALL OPERATOR CAB ASSEMBLY (MACHINE WITH KOMTRAX TERMINAL)
50-441
REMOVE AND INSTALL OPERATOR CAB ASSEMBLY (MACHINE WITH GATEWAY FUNCTION
CONTROLLER)50-462
REMOVE AND INSTALL OPERATOR CAB GLASS (ADHERED GLASS) 50-484
REMOVE AND INSTALL FRONT WINDOW ASSEMBLY 50-497
REMOVE AND INSTALL FLOOR FRAME ASSEMBLY50-506
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY (MACHINE WITH KOMTRAX TERMINAL)
50-520
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY (MACHINE WITH GATEWAY FUNCTION
CONTROLLER) 50-537
REMOVE AND INSTALL OPERATOR SEAT 50-554
REMOVE AND INSTALL SEATBELT 50-556
REMOVE AND INSTALL FRONT WIPER ASSEMBLY 50-558
ELECTRICAL SYSTEM 50-572
REMOVE AND INSTALL ENGINE CONTROLLER ASSEMBLY 50-572
REMOVE AND INSTALL PUMP CONTROLLER ASSEMBLY50-581
REMOVE AND INSTALL MACHINE MONITOR ASSEMBLY 50-587
REMOVE AND INSTALL KOMTRAX TERMINAL ASSEMBLY50-594
REMOVE AND INSTALL GATEWAY FUNCTION CONTROLLER ASSEMBLY50-600
REMOVE AND INSTALL COMMUNICATION TERMINAL WIRING HARNESS 50-608
REMOVE AND INSTALL COMMUNICATION TERMINAL50-624
60 MAINTENANCE STANDARD 60-1
CONTENTS 60-2
ENGINE AND COOLING SYSTEM 60-3
MAINTENANCE STANDARD OF ENGINE MOUNT 60-3
MAINTENANCE STANDARD OF PTO 60-4
MAINTENANCE STANDARD OF COOLING SYSTEM 60-5
POWER TRAIN 60-6
MAINTENANCE STANDARD OF SWING CIRCLE 60-6
MAINTENANCE STANDARD OF SWING MACHINERY 60-7
MAINTENANCE STANDARD OF SPROCKET 60-9
UNDERCARRIAGE AND FRAME 60-10
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION 60-10
MAINTENANCE STANDARD OF IDLER 60-12
MAINTENANCE STANDARD OF TRACK ROLLER 60-13
MAINTENANCE STANDARD OF CARRIER ROLLER 60-14
MAINTENANCE STANDARD OF TRACK SHOE 60-15
MAINTENANCE STANDARD OF TRIPLE SHOE 60-18
HYDRAULIC SYSTEM 60-19
MAINTENANCE STANDARD OF HYDRAULIC TANK 60-19
MAINTENANCE STANDARD OF MAIN PUMP 60-20
MAINTENANCE STANDARD OF PC-EPC VALVE 60-24
MAINTENANCE STANDARD OF SWING MOTOR 60-25
MAINTENANCE STANDARD OF TRAVEL MOTOR 60-28
MAINTENANCE STANDARD OF CONTROL VALVE 60-29
MAINTENANCE STANDARD OF WORK EQUIPMENT AND SWING PPC VALVE 60-40
MAINTENANCE STANDARD OF BLADE PPC VALVE 60-43
00 INDEX AND FOREWORD INDEX
PC130-10M0 00-11
MAINTENANCE STANDARD OF TRAVEL PPC VALVE 60-45
MAINTENANCE STANDARD OF 1ST-LINE ATTACHMENT PPC VALVE (WITH EPC VALVE) 60-48
MAINTENANCE STANDARD OF SOLENOID VALVE 60-51
MAINTENANCE STANDARD OF VARIABLE BACK PRESSURE SOLENOID VALVE 60-55
MAINTENANCE STANDARD OF ATTACHMENT CIRCUIT SELECTOR VALVE (FOR LOW PRESSURE)
60-56
MAINTENANCE STANDARD FOR ATTACHMENT CIRCUIT ACCUMULATOR (FOR LOW PRESSURE
CIRCUIT) 60-57
MAINTENANCE STANDARD OF CENTER SWIVEL JOINT 60-58
WORK EQUIPMENT 60-60
MAINTENANCE STANDARD OF WORK EQUIPMENT LINKAGE 60-60
MAINTENANCE STANDARD OF BOOM CYLINDER 60-70
MAINTENANCE STANDARD OF ARM CYLINDER 60-71
MAINTENANCE STANDARD OF BUCKET CYLINDER 60-72
MAINTENANCE STANDARD OF BLADE CYLINDER 60-73
CAB AND ITS ATTACHMENTS 60-74
MAINTENANCE STANDARD OF CAB MOUNT 60-74
80 OTHERS 80-1
CONTENTS 80-2
AIR CONDITIONER SYSTEM 80-4
PRECAUTIONS FOR REFRIGERANT 80-4
AIR CONDITIONER 80-5
SPECIFICATIONS OF AIR CONDITIONER 80-7
CONFIGURATION OF REFRIGERATION CYCLE 80-8
FUNCTION OF REFRIGERATION CYCLE 80-9
SYSTEM DIAGRAM OF AIR CONDITIONER 80-10
COMPONENT PARTS OF AIR CONDITIONER SYSTEM 80-11
AIR CONDITIONER UNIT80-11
AIR CONDITIONER CONTROLLER 80-18
COMPRESSOR 80-20
CONDENSER 80-21
AIR CONDITIONER RELATED SENSORS 80-23
CIRCUIT DIAGRAM AND ARRANGEMENT OF CONNECTOR PINS OF AIR CONDITIONER 80-24
INSTALLATION LOCATIONS OF AIR CONDITIONER PARTS AND ARRANGEMENT OF CONNECTORS
80-26
TEST AIR LEAKAGE (DUCT CONNECTION) 80-30
TEST AIR LEAKAGE (DUCT CONNECTION) 80-30
TEST AIR CONDITIONER BY SELF-DIAGNOSIS FUNCTION 80-33
TEST VENT (MODE) CHANGEOVER 80-34
TEST VENT (MODE) CHANGEOVER 80-34
TEST FRESH/RECIRC AIR CHANGEOVER 80-36
TEST FRESH/RECIRC AIR CHANGEOVER 80-36
TEST SUNLIGHT SENSOR 80-37
TEST SUNLIGHT SENSOR 80-37
TEST DUAL PRESSURE SWITCH 80-38
TEST DUAL PRESSURE SWITCH 80-38
TEST RELAY 80-39
TEST RELAY 80-39
SIMPLE CHECK OF REFRIGERANT VOLUME THROUGH SIGHT GLASS 80-41
PROCEDURE FOR TROUBLE SHOOTING OF AIR CONDITIONER 80-42
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 80-43
FAILURE CODE [879AKA] 80-46
FAILURE CODE [879AKB] 80-47
FAILURE CODE [879BKA] 80-48
FAILURE CODE [879BKB] 80-50
FAILURE CODE [879CKA] 80-52
FAILURE CODE [879CKB] 80-53
FAILURE CODE [879DKZ] 80-54
INDEX 00 INDEX AND FOREWORD
00-12 PC130-10M0
FAILURE CODE [879EMC] 80-56
FAILURE CODE [879FMC] 80-57
FAILURE CODE [879GKX] 80-58
A-1 TROUBLESHOOTING FOR POWER SUPPLY SYSTEM (AIR CONDITIONER DOES NOT OPERATE)
80-60
A-2 TROUBLESHOOTING FOR COMPRESSOR AND REFRIGERANT SYSTEM (AIR IS NOT COOLED)
80-63
A-3 TROUBLESHOOTING FOR BLOWER MOTOR SYSTEM (NO AIR COMES OUT OR AIR FLOW IS
ABNORMAL) 80-66
A-4 TROUBLESHOOTING FOR FRESH/RECIRC AIR CHANGEOVER 80-68
CONNECT SERVICE TOOL 80-71
CONNECT SERVICE TOOL 80-72
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF AIR CONDITIONER PIPING 80-73
HANDLE COMPRESSOR OIL 80-75
REPLACE DESICCANT 80-77
90 CIRCUIT DIAGRAMS 90-1
CONTENTS 90-2
HOW TO READ THE CODES FOR ELECTRIC CABLE 90-3
HYDRAULIC CIRCUIT DIAGRAM 90-7
SYMBOLS USED IN HYDRAULIC CIRCUIT DIAGRAM 90-7
HYDRAULIC CIRCUIT DIAGRAM (1/3) 90-11
HYDRAULIC CIRCUIT DIAGRAM (2/3) 90-13
HYDRAULIC CIRCUIT DIAGRAM (3/3) 90-15
ELECTRICAL CIRCUIT DIAGRAM 90-17
SYMBOLS USED IN ELECTRICAL CIRCUIT DIAGRAM 90-17
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (1/6) 90-21
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (2/6) 90-23
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (3/6) 90-25
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (4/6) 90-27
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (5/6) 90-29
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITHOUT FUEL REFILL PUMP) (6/6) 90-31
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (1/6) 90-33
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (2/6) 90-35
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (3/6) 90-37
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (4/6) 90-39
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (5/6) 90-41
ELECTRICAL CIRCUIT DIAGRAM (MACHINES WITH FUEL REFILL PUMP) (6/6) 90-43

Questions? Email us: [email protected]

https://vimeo.com/743649360

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

I.G