KOMATSU PC3000-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN: PC3000-6-6219) – PDF Download

Description

KOMATSU PC3000-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN: PC3000-6-6219)

KOMATSU PC3000-6 HYDRAULIC MINING SHOVEL OPERATION & MAINTENANCE MANUAL (SN: PC3000-6-6219) – PDF DOWNLOAD:

IMAGE PREVIEW:

SAMPLE PAGE FROM THE MANUAL:

KOMATSU PC3000-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN: PC3000-6-6219)

• This machine has been manufactured in accordance with advanced and up-to-date technology standards including recognized safety rules. Nevertheless, its use may constitute a risk to life and limb of the user or of third parties, or cause damage to the machine and to other material property. The machine must only be used in technically perfect condition in accordance with its designated use and the instructions set out in the operation manual.
• Only trained safety-conscious operators who are fully aware of the risks involved should operate the machine. Any functional disorders, especially those affecting the safety of the machine, should, therefore, be rectified immediately. The hydraulic Shovel is designed exclusively for excavating, i.e. excavation of bulk material and natural soil structure (e.g. earth, clay, sand and stones ashore and off-shore).
• Observe local and national safety regulations. Special conditions at the worksite require additional safe working precautions, follow your company’s safety instructions. Short traveling distances for changing the working site are considered as part of the designated use of the Shovel.
• Using the Shovel for purposes other than those mentioned above (such as object handling and use as a transport vehicle) is considered contrary to its designated use. The manufacturer/supplier cannot be held liable for any damage resulting from such use. The risk of such misuse lies entirely with the user.

TABLE OF CONTENTS:

KOMATSU PC3000-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN: PC3000-6-6219)

MAIN MENU.....................................................................................................................  0
COVER.........................................................................................................................  1
1. INTRODUCTION...............................................................................................................  3
	1.1 CONTENTS OF THE BINDER................................................................................................  4
	1.2 DIVISION OF THE BINDER................................................................................................  5
	1.3 DESIGNATED USE OF THE SHOVEL..........................................................................................  6
	1.4 DELIVERY OF THE SHOVEL................................................................................................  7
	1.5 EXPLANATION OF ABBREVIATIONS..........................................................................................  8
	1.6 TABLE OF CONTENTS.....................................................................................................  9
2. SAFETY..................................................................................................................... 15
	2.1 SAFETY INSTRUCTIONS................................................................................................... 16
		2.1.1 WARNINGS AND SYMBOLS............................................................................................ 16
		2.1.2 BASIC OPERATION AND DESIGNATED USE OF THE HYDRAULIC SHOVEL...................................................... 16
		2.1.3 ORGANIZATIONAL MEASURES......................................................................................... 17
		2.1.4 SELECTION AND QUALIFICATION OF PERSONNEL - BASIC RESPONSIBILITIES............................................... 19
		2.1.5 SAFETY INSTRUCTIONS GOVERNING SPECIFIC OPERATIONAL PHASES....................................................... 20
		2.1.6 WARNING OF SPECIAL DANGERS...................................................................................... 23
		2.1.7 TRANSPORTING AND TOWING -RECOMMISSIONING........................................................................ 25
		2.1.8 SPECIAL SAFETY EQUIPMENT........................................................................................ 25
		2.1.9 SAFETY HARNESS IN CONFORMITY WITH EN 361 (EUROPEAN STANDARD).................................................... 29
3. OPERATION.................................................................................................................. 37
	3.1 FOREWORD.............................................................................................................. 38
	3.2 CONSTRUCTION OF THE SHOVEL............................................................................................ 39
		3.2.1 OVERALL VIEW.................................................................................................... 39
		3.2.2 UNDERCARRIAGE AND SUPERSTRUCTURE................................................................................ 40
		3.2.3 HYDRAULICALLY OPERATED ACCESS LADDER............................................................................ 46
		3.2.4 EMERGENCY ESCAPE LADDER......................................................................................... 50
		3.2.5 EMERGENCY ENGINE SHUTDOWN FROM GROUND MAN OR OPERATOR WARNING SYSTEM............................................ 52
		3.2.6 OPERATOR’S CAB WITH INTEGRATED FALLING OBJECT PROTECTIVE STRUCTURE (FOPS)....................................... 54
		3.2.7 ENGINE OIL MANAGEMENT SYSTEM.................................................................................... 62
	3.3 OPERATOR’S CAB - CONTROLS............................................................................................. 70
		3.3.1 CONTROLS WITH BACKHOE ATTACHMENT................................................................................ 70
			Hydraulic Control System.......................................................................................... 71
			Safety Circuit for Controls....................................................................................... 71
			EURO Control Pattern.............................................................................................. 73
		3.3.2 CONTROLS WITH BOTTOM DUMP BUCKET................................................................................ 74
			Hydraulic Control System.......................................................................................... 75
			Safety Circuit for Controls....................................................................................... 75
			Automatic Float Position for Boom and Stick....................................................................... 75
			EURO Control Pattern.............................................................................................. 77
		3.3.3 OPERATOR’S CONSOLE.............................................................................................. 79
			Control Panel..................................................................................................... 81
			Rear Panel Controls............................................................................................... 85
	3.4 ELECTRONIC TEXT MONITORING SYSTEM ETM................................................................................. 86
		3.4.1 INTRODUCTION.................................................................................................... 87
			Function of the keys (1 to 8) of Keyboard (B):.................................................................... 89
		3.4.2 SYSTEM COMPONENTS............................................................................................... 91
			Message Classification............................................................................................ 93
		3.4.3 FUNCTIONS OF THE ETM SYSTEM..................................................................................... 93
		3.4.4 DISPLAY THE CONTENTS OF THE RECORD (PROTOCOL) MEMORY............................................................ 97
			Display the Contents of Record Memory............................................................................. 99
			Print out Contents of Statistics Memory:..........................................................................101
			Print out Contents of Record (PROTOCOL) memory....................................................................101
			Print out the last Entries of the Record (PROTOCOL) Memory........................................................105
			Change - over from English to German Language.....................................................................107
			Change-over from German to English Language.......................................................................107
		3.4.5 SEVERAL MESSAGE CONDITIONS OCCUR AT THE SAME TIME...............................................................109
		3.4.6 SETTINGS OF THE TEXT DISPLAY UNIT...............................................................................111
			TABLE OF MESSAGES.................................................................................................114
				Message Pages Number 1 to 7...................................................................................114
				Message Pages Number 8 to 15..................................................................................115
				Message Pages Number 16 to 24.................................................................................116
				Message Pages Number 25 to 34.................................................................................117
				Message Pages Number 35 to 43.................................................................................118
				Message Pages Number 44 to 51.................................................................................119
				Message Pages Number 52 to 60.................................................................................120
				Message Pages Number 61 to 64.................................................................................121
			Grouping of the Messages according to their Priority..............................................................122
				1st Priority Group:...........................................................................................122
				2nd Priority Group:...........................................................................................122
				3rd Priority Group:...........................................................................................123
				4th Priority Group............................................................................................123
			Explanation of the statistics print-out...........................................................................124
			Time Diagram of Statistics Print..................................................................................125
	3.5 OPERATING THE HEATER, VENTILATION AND AIR CONDITIONING................................................................126
	3.6 MACHINERY HOUSE.......................................................................................................128
		3.6.1 EMERGENCY ENGINE SHUTDOWN SWITCHES..............................................................................129
	3.7 ELECTRICAL EQUIPMENT IN CAB BASE......................................................................................130
		3.7.1 SWITCH BOX (X2) IN CAB BASE.....................................................................................135
	3.8 CHECKS BEFORE STARTING THE ENGINE.....................................................................................138
	3.9 STARTING THE ENGINE...................................................................................................144
		3.9.1 STARTING PROCEDURE..............................................................................................147
	3.10 MOVING THE SHOVEL....................................................................................................153
		3.10.1 TRAVEL CONTROL WITH FOOT PEDALS................................................................................153
		3.10.2 TRAVELLING INSTRUCTIONS........................................................................................156
	3.11 SLEWING AND BRAKING THE SUPERSTRUCTURE...............................................................................157
		3.11.1 SLEWING THE SUPERSTRUCTURE.....................................................................................157
	3.12 WORKING WITH THE ATTACHMENT..........................................................................................160
		3.12.1 MACHINES EQUIPPED WITH”EURO” CONTROL SYSTEM....................................................................160
		3.12.2 MACHINES EQUIPPED WITH”KMG” CONTROL SYSTEM.....................................................................161
		3.12.3 BOTTOM DUMP BUCKET.............................................................................................162
		3.12.4 DROP BALL OPERATION............................................................................................163
			SAFETY DEVICES (SPECIAL EQUIPMENT)................................................................................164
			WORKING HINTS.....................................................................................................165
		3.12.5 COMBINED OPERATION CYCLES......................................................................................166
	3.13 WORKING INSTRUCTIONS.................................................................................................168
		3.13.1 STABILITY OF THE SHOVEL........................................................................................168
		3.13.2 SHOVEL OPERATION...............................................................................................168
	3.14 PARKING THE SHOVEL...................................................................................................171
	3.15 STOPPING THE ENGINE..................................................................................................172
		3.15.1 RELIEVE PRESSURE IN THE HYDRAULIC SYSTEM.......................................................................175
	3.16 AUTOMATIC LUBRICATION SYSTEMS........................................................................................176
		3.16.1 OPERATION OF THE AUTOMATIC LUBRICATION SYSTEMS.................................................................177
	3.17 FIRE DETECTION AND SUPPRESSION SYSTEM................................................................................180
		3.17.1 HIGH LEVEL ALARM ”FIRE”........................................................................................183
		3.17.2 ENGINE SHUT-DOWN THROUGH FUEL SHUT-OFF SOLENOID VALVE..........................................................183
		3.17.3 ACTUATION MODES OF THE FIRE SUPPRESSION SYSTEM.................................................................183
		3.17.4 INDICATION OF OPERATIONAL MODES AT CONTROL MODULE, AFTER AUTOMATIC ACTUATION OF THE FIRE SUPPRESSION SYSTEM....185
		3.17.5 LOCATION OF THE EXTINGUISHING AGENT TANK ASSEMBLIES AND EXPELLANT GAS CARTRIDGES ON POWER HOUSE ROOF...........187
	3.18 CENTRAL REFILLING SYSTEM.............................................................................................188
		3.18.1 SYSTEMS CONNECTED TO THE REFILLING SYSTEM......................................................................189
		3.18.2 OPERATING THE HYDRAULIC SERVICE ARM............................................................................191
		3.18.3 RECEIVER PANEL WITH MONITOR BOX................................................................................193
		3.18.4 REFILLABLE GREASE CONTAINERS OF THE AUTOMATIC LUBRICATION SYSTEMS..............................................197
	3.19 TRANSFER PUMP FOR HYDRAULIC OIL......................................................................................198
		3.19.1 OPERATING THE TRANSFER PUMP....................................................................................199
		3.19.2 FUNCTIONS OF THE TRANSFER PUMP.................................................................................199
	3.20 WORK ON THE LOADER ATTACHMENT........................................................................................202
	3.21 TRANSPORTATION AND LIFTING OF THE SHOVEL.............................................................................203
		3.21.1 DISASSEMBLING OF THE SHOVEL....................................................................................203
		3.21.2 TRANSPORTATION AND LIFTING.....................................................................................203
	3.22 RETRIEVAL PROCEDURE..................................................................................................204
	3.23 SHOVEL STORAGE.......................................................................................................205
		3.23.1 PREPARING FOR STORAGE..........................................................................................205
		3.23.2 ONE MONTH REPETITIVE SERVICE PERIOD............................................................................206
		3.23.3 SIX MONTH REPETITIVE SERVICE PERIOD............................................................................206
		3.23.4 PREPARING FOR OPERATION........................................................................................207
	3.24 TROUBLE SHOOTING.....................................................................................................208
		3.24.1 ENGINE.........................................................................................................208
		3.24.2 HYDRAULIC SYSTEM...............................................................................................209
		3.24.3 FINAL DRIVES AND SWING GEAR....................................................................................210
		3.24.4 CRAWLER TRACKS.................................................................................................210
4. MAINTENANCE................................................................................................................211
	4.1 FOREWORD..............................................................................................................212
	4.2 PRECAUTIONS FOR MAINTENANCE...........................................................................................213
	4.3 FUEL AND LUBRICANTS...................................................................................................215
	4.4 FILLING CAPACITIES....................................................................................................217
	4.5 STANDARD TORQUE LIST..................................................................................................218
	4.6 LUBRICATION AND MAINTENANCE SCHEDULE..................................................................................219
		4.6.1 INITIAL SERVICING...............................................................................................219
		4.6.2 PERIODIC SERVICING INTERVALS....................................................................................219
		4.6.3 PERIODIC SERVICING SCHEDULE.....................................................................................220
			Lubrication Chart.................................................................................................224
			REPLACEMENT OF HYDRAULIC HOSE LINES...............................................................................225
			INSPECTION OF HYDRAULIC HOSE LINES................................................................................225
		4.6.4 EXTENDED SERVICE INTERVALS FOR ENGINES WITH ENGINE OIL MANAGEMENT SYSTEM........................................227
		4.6.5 RESETTING THE ENGINE OIL BURNING SYSTEM CENTINEL................................................................229
		4.6.6 MAINTENANCE OF THE ENGINE.......................................................................................231
	4.7 WHEN NECESSARY........................................................................................................232
		4.7.1 ENGINE AIR CLEANER MAINTENANCE..................................................................................233
		4.7.2 SWING CIRCLE TOOTHING LUBRICATION...............................................................................237
		4.7.3 AUTOMATIC LUBRICATION SYSTEMS FILL GREASE CONTAINERS............................................................239
		4.7.4 TRACK ROLLERS AND GUIDE WHEELS - REPLACE FLOATING SEALS.........................................................243
		4.7.5 COLD STARTING AID, REPLACE FLUID CYLINDER.......................................................................245
	4.8 EVERY 10 OPERATING HOURS OR DAILY.....................................................................................246
		4.8.1 WALK - AROUND INSPECTION........................................................................................247
		4.8.2 AIR CLEANER - CLEAN PRE-CLEANER.................................................................................255
		4.8.3 RADIATOR - CHECK COOLANT LEVEL..................................................................................257
		4.8.4 TRACK GROUPS - CLEAN............................................................................................257
		4.8.5 FUEL SYSTEM WATER SEPARATOR - DRAIN WATER.......................................................................259
	4.9 EVERY 50 OPERATING HOURS OR WEEKLY....................................................................................260
		4.9.5 HYDRAULIC OIL COOLERS - INSPECT AND CLEAN IF NECESSARY..........................................................273
		4.9.1 SWING GEAR AND MOTOR ADAPTER HOUSING - CHECK OIL LEVEL..........................................................261
		4.9.2 TRAVEL GEARS, BRAKE HOUSINGS AND MOTOR ADAPTER HOUSINGS - CHECK OIL LEVELS......................................265
		4.9.3 PTO (PUMP DISTRIBUTOR GEAR) - CHECK OIL LEVEL...................................................................269
		4.9.4 HYDRAULIC ACCESS LADDER - CHECK SAFETY SENSOR...................................................................271
	4.10 EVERY 250 OPERATING HOURS OR MONTHLY.................................................................................274
		4.10.1 AIR CONDITIONING COMPRESSOR - CHECK DRIVE BELT TENSION.........................................................275
		4.10.2 RADIATOR FAN BELT AND AUTOMATIC BELT TENSIONER - MAINTENANCE CHECK.............................................277
		4.10.3 GENERATOR - CHECK BELT TENSION.................................................................................281
		4.10.4 SIGNAL HORN COMPRESSOR - LUBRICATE.............................................................................283
		4.10.5 HYDRAULIC OIL COOLER FAN - CHECK CONDITION AND FASTENING.......................................................283
		4.10.6 AUTOMATIC LUBRICATION SYSTEMS - CLEAN IN-LINE GREASE FILTER AND CHECK BREATHER FILTER..........................285
		4.10.7 CAB AIR CLEANER - CLEAN OR REPLACE FILTER ELEMENT..............................................................289
		4.10.8 WINDSHIELD WASHER RESERVOIR - CHECK FLUID LEVEL................................................................291
		4.10.9 AIR CONDITIONING FOR OPERATOR’S CAB - CHECK REFRIGERANT LEVEL..................................................291
	4.11 EVERY 500 OPERATING HOURS OR MONTHLY.................................................................................292
		4.11.1 BATTERIES - CHECK FLUID LEVEL..................................................................................293
		4.11.2 FLEXIBLE DRIVE COUPLING - CHECK OIL LEVEL......................................................................295
		4.11.3 FUEL TANK - DRAIN CONDENSATION.................................................................................297
		4.11.4 CRAWLER TRACK - INSPECTION.....................................................................................299
			CHECK ADJUSTING RANGE FOR GUIDE WHEELS............................................................................301
			CHECK ADJUSTING RANGE FOR GUIDE WHEELS............................................................................303
	4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTHS.........................................................................304
		4.12.1 HIGH STRENGTH BOLT CONNECTIONS - CHECK TORQUE LOAD.............................................................305
		4.12.2 HYDRAULIC SYSTEM - FILTER SERVICE..............................................................................337
		4.12.3 PTO (PUMP DISTRIBUTOR GEAR), SWING GEAR AND TRAVEL GEARS - OIL SAMPLE ANALYSIS.................................351
		4.12.4 SIGNAL HORN COMPRESSOR - CLEAN AND LUBRICATE...................................................................353
		4.12.5 HYDRAULIC TRACK TENSIONING SYSTEM - CHECK PRESSURE ACCUMULATORS................................................355
		4.12.6 HYDRAULIC OIL COOLER - INSPECT AND LUBRICATE DOOR HINGES.......................................................357
		4.12.7 MACHINERY HOUSE DOORS - INSPECT AND LUBRICATE DOOR HINGES......................................................357
	4.13 EVERY 2000 OPERATING HOURS OR YEARLY.................................................................................358
		4.13.1 HYDRAULIC SYSTEM - CHANGE OIL, REPLACE SUCTION STRAINERS AND PULSATION DAMPER..................................359
		4.13.2 EMERGENCY ESCAPE LADDER - INSPECTION...........................................................................373
	4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR..............................................................374
		4.14.1 SWING GEAR AND MOTOR ADAPTER HOUSING - CHANGE OIL..............................................................375
		4.14.2 TRAVEL GEARS, BRAKE AND MOTOR ADAPTER HOUSINGS - CHANGE OIL....................................................383
		4.14.3 PTO (PUMP DISTRIBUTOR GEAR) - CHANGE OIL.......................................................................387
	4.15 FIRE PREVENTION......................................................................................................390
	4.16 WELD REPAIRS.........................................................................................................392
		4.16.1 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE UNDERCARRIAGE..........................................395
		4.16.2 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE LOADER ATTACHMENT......................................397
		4.16.3 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE SUPERSTRUCTURE.........................................399
		4.16.4 AFTER FINISHING THE REPAIR WELDINGS ON THE SUPERSTRUCTURE......................................................401

PLEASE NOTE:

⦁ This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
⦁ The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
⦁ Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer