Komatsu PC490LCi-11 Hydraulic Excavator Operation & Maintenance Manual TEN01035-01 – PDF DOWNLOAD

Description

Komatsu PC490LCi-11 Hydraulic Excavator Operation & Maintenance Manual TEN01035-01 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Komatsu PC490LCi-11 Hydraulic Excavator Operation & Maintenance Manual TEN01035-01 – PDF DOWNLOAD

SERIAL NUMBERS 85842 and up

READ THIS MANUAL:

• Before reading this manual, read the Operation and Maintenance Manual of standard machine (PC490LC-11).
  This manual describes only the special device or function for PC490LCI-11. For the other part than described in
  this manual, see the Operation and Maintenance Manual of standard machine.
• This manual gives details of the operation and methods of inspection and maintenance for this machine that
  must be observed in order to use the machine safely. Most accidents are caused by the failure to follow fundamental
  safety rules for the operation and maintenance of machines.
• Read, understand and follow all precautions and warnings in this manual and on the machine before performing
  operation and maintenance. Failure to do so may result in serious injury or death.
• Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used.
  Therefore, the safety messages in this manual and on the machine may not include all possible safety precautions.
• If you perform any operation, inspection, or maintenance under conditions that are not described in this manual,
  understand that it is your responsibility to take the necessary precautions to ensure safety. In no event should
  you or others engage in the prohibited uses or actions described in this manual. It is dangerous to perform improper
  operation and maintenance of the machine. It may cause serious injury or death.
• If you sell the machine, be sure to give this manual to the new owner together with the machine.
  Always keep this Operation and Maintenance Manual in the indicated location on the right so that all relevant
  personnel can read it at any time.

Customer Support: [email protected]

TABLE OF CONTENTS:

Komatsu PC490LCi-11 Hydraulic Excavator Operation & Maintenance Manual TEN01035-01 – PDF DOWNLOAD

FOREWORD 1-1
READ THIS MANUAL 1-4
SAFETY INFORMATION 1-5
INTRODUCTION 1-6
intelligent Machine Control 1-6
MAIN USE OF MACHINE 1-6
ABBREVIATION LIST 1-7
SAFETY 2-1
SAFETY 2-2
SAFETY LABELS 2-3
LOCATION OF SAFETY LABELS 2-4
SAFETY LABELS 2-6
PRECAUTIONS FOR OPERATION 2-9
START ENGINE 2-9
PRECAUTIONS RELATED TO CONTROL BOX 2-10
PRECAUTIONS RELATED TO SEMI-AUTO MODE 2-10
PRECAUTIONS FOR TRANSPORTATION 2-11
OPERATION 3-1
GENERAL VIEW 3-2
MACHINE EQUIPMENT NAME 3-2
CAB EQUIPMENT NAMES 3-5
EXPLANATION OF COMPONENTS 3-6
EXPLANATION OF MACHINE MONITOR EQUIPMENT 3-6
SWITCH 3-13
CONTROL LEVERS AND PEDALS 3-17
intelligent Machine Control SYSTEM 3-19
OTHER EQUIPMENT 3-24
MACHINE OPERATIONS AND CONTROLS 3-38
CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE 3-38
METHOD FOR STARTING ENGINE 3-47
METHOD FOR STOPPING ENGINE 3-55
PROHIBITED OPERATIONS 3-57
METHOD FOR PARKING MACHINE 3-58
HANDLING RADIO 3-60
TRANSPORTATION 3-61
REMOVE AND INSTALL GNSS ANTENNA 3-61
REMOVE AND INSTALL HANDRAIL 3-64
REMOVE AND INSTALL GNSS ANTENNA AND ANTENNA FOR NETWORK MODEM 3-67
PRECAUTIONS FOR LONG-TERM STORAGE 3-74
STARTING MACHINE AFTER LONG-TERM STORAGE 3-74
TROUBLES AND ACTIONS 3-75
IF ERROR INFORMATION IS DISPLAYED ON CONTROL BOX 3-75
OTHER TROUBLE 3-77
MAINTENANCE 4-1
MAINTENANCE SCHEDULE 4-2
MAINTENANCE SCHEDULE TABLE 4-2
MAINTENANCE PROCEDURE 4-3
EVERY 500 HOURS MAINTENANCE 4-3
SPECIFICATIONS 5-1
SPECIFICATIONS 5-2
SPECIFICATIONS:PC490LCI-11 5-2
ATTACHMENTS AND OPTIONS 6-1
RECOMMENDED ATTACHMENT OPERATIONS 6-2
HYDRAULIC BREAKER 6-2
SETTING 7-1
INTELLIGENT MACHINE CONTROL SETTINGS 7-2
CONTENTS FOREWORD
1-2
CONTROL BOX 7-3
METHOD FOR DISPLAYING MAIN MENU 7-3
MACHINE MONITOR 7-215
MC SETTING 7-215
EXECUTIONS 8-1
SEMI-AUTO MODE 8-2
PRECAUTIONS FOR OPERATION 8-2
PRECAUTIONS FOR REPLACING PARTS AND FAILURES 8-5
WORKING MODE 8-5
SEMI-AUTO MODE SETTINGS 8-7
TRAVEL MODE 8-13
TRAVEL MODE SETTINGS 8-13
DISPLAY OF TRAVEL MODE 8-13
OFFSET MENU OF SURFACE 8-15
TEMPORARY DESIGN MENU 8-16
TARGET SURFACE SETTINGS 8-17
ROUGH DIGGING MODE 8-18
METHOD FOR SETTING ROUGH DIGGING SCREEN 8-18
FINE DIGGING MODE 8-22
METHOD FOR SETTING FINE DIGGING MODE SCREEN 8-22
TARGET SURFACE SETTINGS 8-26
TARGET SURFACE SETTING MENU 8-26
METHOD FOR SETTING TARGET SURFACE 8-26
BUCKET EDGE POSITION 8-29
DISPLAY BUCKET EDGE POSITION 8-29
METHOD FOR COMPARING WITH BENCHMARK 8-31
METHOD FOR CORRECTING BUCKET EDGE POSITION 8-32
DAILY CALIBRATION 8-33
WALK-AROUND CHECKS OF INTELLIGENT MACHINE CONTROL EQUIPMENT 8-33
CHECK GNSS COMMUNICATION STATUS 8-46
METHOD FOR CHECKING GNSS COMMUNICATION STATUS 8-46
METHOD FOR CHECKING NUMBER OF SATELLITES AND ERROR OF POSITIONING 8-47
METHOD FOR DISPLAYING BUCKET EDGE COORDINATES 8-47
METHOD FOR SETTING SATELLITE POSITION DISPLAY AND ELEVATION ANGLE 8-48
METHOD FOR DISPLAYING GNSS RECEIVER INFORMATION 8-50
METHOD FOR CHEKING EXPECTANCY OF EDGE ACCURANCY 8-51
SET SATELLITE 8-51
METHOD FOR SETTING TILT SENSOR 8-52
USE OF TOPO SURVEY 8-54
METHOD FOR PERFORMING TOPO SURVEY MANUALLY 8-54
METHOD FOR PERFORMING AUTO-TOPO SURVEY 8-57
METHOD FOR CANCELING TOPOGRAPHIC SURVEYS 8-60
TROUBLESHOOTING 8-61
CONTROL BOX SCREEN DISPLAY 8-61
SEMI-AUTO MODE 8-64
WORKING ACCURACY 8-66
INDEX 9-1

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V