Komatsu WB140Ps-2, WB150Ps-2 Backhoe Loaders Operation & Maintenance Manual – PDF DOWNLOAD

Description

Komatsu WB140Ps-2, WB150Ps-2 Backhoe Loaders Operation & Maintenance Manual

FILE DETAILS:

Komatsu WB140Ps-2, WB150Ps-2 Backhoe Loaders Operation & Maintenance Manual

Model Specification: KOMATSU WB140PS-2, WB150PS-2 BACKHOE LOADERS
Language: English
File Format: PDF
Total Pages: 241
Requirements: Adobe PDF Reader
ZOOM IN/OUT: YES
Downloadable: YES

KOMATSU WB140PS-2, WB150PS-2 BACKHOE LOADERS OPERATION & MAINTENANCE MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Komatsu WB140Ps-2, WB150Ps-2 Backhoe Loaders Operation & Maintenance Manual

FOREWORD:

This manual has been carried out by Komatsu in order to supply their customers with all the necessary information on the machine and the safety regulations related to it, together with the use and maintenance instructions that enable the operator to exploit the capacity of the machine with optimal results and to keep the machine efficient over time.
• The operation manual, together with the spare parts catalogue, is an integral part of the machine and must accompany it, even when it is resold, until the nachine’s final disposal.
• The manual must be handled with the greatest care and always kept on board the machine, so that it can be consulted at any moment; it must be placed in the appropriate compartment behind the seat, where also the ownership documents and the logbook are usually kept (see “14.9 TECHNICAL DOCUMENTATION”).
• This manual must be given to the persons who have to use the machine and carry out the routine maintenance operations; they must read the contents carefully more than once, in such a way as to clearly understand what are the correct operating conditions and the dangerous conditions that must be avoided. In case of loss or damage, request a new copy from Komatsu or your Komatsu Dealer.
• The illustrations contained in this manual may rapresent machine configurations available on request. Continuing improvements in the design of the machine can lead to changes in detail which may not be reflected in this manual. Consult Komatsu or your Komatsu distributor for the latest available information of your machine or for questions regarding information in this manual.
• Punctual periodic annotations regarding the maintenance operations that have been carried out are important to have a clear prospect of the situation and to know exactly what has been done and what has to be done after the next maintenance interval. Therefore, consult the hour meter and the maintenance plan frequently.
• This manual may contain attachments and optional equipment that are not available in your area. Consult your Komatsu distributor for those items you may require.
• The table included in this manual (page 8) must be filled in with the machine data, which is the data that must always be indicated to the Dealer when requiring assistance and ordering spare parts.

TABLE OF CONTENTS:

Komatsu WB140Ps-2, WB150Ps-2 Backhoe Loaders Operation & Maintenance Manual

MAIN MENU....................................................................................................................  0
COVER........................................................................................................................  1
TABLE OF CONTENTS............................................................................................................  2
FOREWORD..................................................................................................................... 10
INFROMATION ON SAFETY........................................................................................................ 11
INTRODUCTION................................................................................................................. 13
INTENDED USES................................................................................................................ 13
IMPROPER OR UNAUTHORIZED USES................................................................................................ 13
MAIN CHARACTERISTICS......................................................................................................... 14
RUNNING-IN................................................................................................................... 14
PRODUCT IDENTIFICATION....................................................................................................... 15
MACHINE SERIAL NUMBER ....................................................................................................... 15
MACHINE IDENTIFICATION PLATE................................................................................................. 15
ENGINE SERIAL NUMBER AND EMISSION LABLE...................................................................................... 16
FRONT AXLE SERIAL NUMBER .................................................................................................... 16
REAR AXLE SERIAL NUMBER...................................................................................................... 16
TRANSMISSION SERIAL NUMBER .................................................................................................. 17
CAB SERIAL NUMBER............................................................................................................ 17
CANOPY SERIAL NUMBER......................................................................................................... 17
SERIAL NUMBER AND DEALER'S ADDRESS........................................................................................... 18
SAFETY AND ACCIDENT PREVENTION............................................................................................... 20
	1. GENERAL PRECAUTIONS................................................................................................... 21
		1.1 GENERAL SAFETY RULES............................................................................................. 21
		1.2 SAFETY DEVICES AND GUARDS........................................................................................ 21
		1.3 CLOTHING AND PERSONAL PROTECTION................................................................................. 21
		1.4 UNAUTHORIZED MODIFICATIONS....................................................................................... 22
		1.5 LEAVING THE OPERATOR'S SEAT...................................................................................... 22
		1.6 GETTING ON AND OFF THE MACHINE................................................................................... 23
		1.7 CHECKING THE REAR-VIEW MIRROR.................................................................................... 23
		1.8 PREVENTING FIRES DUE TO FUEL AND OIL............................................................................. 24
		1.9 PREVENTING BURNS................................................................................................. 24
		1.10 PREVENTING DAMAGE DUE TO ASBESTOS POWDER........................................................................ 25
		1.11 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT.................................................................. 25
		1.12 FIRE EXTINGUISHERS AND FIRST AID KIT............................................................................ 26
		1.13 PRECAUTIONS CONCERNING THE CAB STRUCTURE........................................................................ 26
		1.14 PRECAUTIONS CONCERNING THE EQUIPMENT............................................................................ 26
PRECAUTIONS.................................................................................................................. 28
	2. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE.................................................................... 29
		2.1 SAFETY ON THE WORK SITE.......................................................................................... 29
		2.2 FIRE PREVENTIONS................................................................................................. 29
		2.3 PRECAUTIONS TO BE TAKEN FOR THE OPERATOR'S CAB................................................................... 29
		2.4 ROOM VENTILATION................................................................................................. 30
		2.5 CLEANING WINDOWS, MIRRORS AND LIGHTS - CHECKING THE WINDSHIELD WIPER BLADES AND THE BULBS........................ 30
	3. PRECAUTIONS TO BE TAKEN WHEN WORKING.................................................................................. 31
		3.1 STARTING THE ENGINE.............................................................................................. 31
		3.2 RULES FOR ROAD TRAVEL............................................................................................ 31
		3.3 CHECKS FOR TRAVELING IN REVERSE.................................................................................. 32
		3.4 MOVING THE MACHINE............................................................................................... 33
		3.5 WORKING ON SLOPES................................................................................................ 33
		3.6 PREVENTING ELECTROCUTION......................................................................................... 34
		3.7 VISIBILITY....................................................................................................... 35
		3.8 WORKING ON ICY OR SNOW-COVERED SURFACES.......................................................................... 35
		3.9 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT................................................................... 35
		3.10 WORKING ON LOOSE GROUND......................................................................................... 35
		3.11 PARKING THE MACHINE............................................................................................. 36
	4. TRANSPORTING THE MACHINE ON OTHER VEHICLES............................................................................ 37
		4.1 LOADING AND UNLOADING............................................................................................ 37
		4.2 THE ROUTE........................................................................................................ 37
	5. THE BATTERY........................................................................................................... 38
		5.1 SAFETY PRECAUTIONS FOR WORK ON BATTERIES......................................................................... 38
		5.2 STARTING THE ENGINE WITH JUMP LEADS.............................................................................. 39
	6. PRECAUTIONS FOR EMERGENCY RECOVERY.................................................................................... 40
	7. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE............................................................................ 41
		7.1 WARNING PLATES................................................................................................... 41
		7.2 TOOLS............................................................................................................ 41
		7.3 PERSONAL PRECAUTIONS............................................................................................. 41
		7.4 EQUIPMENT........................................................................................................ 42
		7.5 WORKING UNDER THE MACHINE........................................................................................ 42
		7.6 KEEPING THE MACHINE CLEAN........................................................................................ 42
		7.7 RUNNING THE ENGINE DURING MAINTENANCE............................................................................ 43
		7.8  RULES FOR REFUELING AND ADDING OIL.............................................................................. 43
		7.9 LEVEL OF COOLANT IN THE RADIATOR................................................................................. 43
		7.10 USING LAMPS..................................................................................................... 44
		7.11 PRECAUTIONS CONCERNING THE GEARSHIFT............................................................................ 44
		7.12 BATTERY AND ALTERNATOR PRECAUTIONS.............................................................................. 44
		7.13 PRECAUTIONS CONCERNING THE STARTER.............................................................................. 45
		7.14 PRECAUTIONS REGARDING HIGH PRESSURE HOSES....................................................................... 45
		7.15 PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGH PRESSURE SYSTEMS................................................... 46
		7.16 PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURE AND PRESSURES....................................... 46
		7.17 THE RADIATOR COOLING FAN AND FAN BELT........................................................................... 46
		7.18 WASTE MATERIALS................................................................................................. 47
		7.19 PRECAUTIONS FOR INFLATING TIRES................................................................................. 47
		7.20 PRECAUTIONS FOR THE INSTALLATION OF THE EXHAUST SYSTEM TAILPIPE................................................. 47
	8. SAFETY PLATES......................................................................................................... 48
		8.1 POSITION OF THE SAFETY PLATES.................................................................................... 48
		8.2 POSITION OF PICTOGRAMS........................................................................................... 62
		8.3 PICTOGRAMS AND RELEVANT MEANINGS................................................................................. 64
		8.4 VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED.................................................................... 67
TECHNICAL SPECIFICATION...................................................................................................... 68
	9. TECHNICAL DATA........................................................................................................ 69
		9.1 STANDARD OVERALL DIMENSIONS...................................................................................... 69
		9.2 TECHNICAL CHARACTERISTICS OF WB140PC-2........................................................................... 70
		9.3 TECHNICAL CHARACTERISTICS OF WB150PS-2........................................................................... 71
		9.4 LIFTING CAPACITIES............................................................................................... 72
			9.4.1 SYMBOL TABLE............................................................................................... 72
			9.4.2 LIFTING CAPACITY WB140PS-2................................................................................. 73
			9.4.3 LIFTING CAPACITY WB150PS-2................................................................................. 75
DESCRIPTION AND USE OF THE MACHINE........................................................................................... 78
	10. SAFETY LOCKS......................................................................................................... 79
		10.1 FRONT LOADER LOCK............................................................................................... 79
		10.2 BACKHOE LOADERS................................................................................................. 81
	11. GENERAL VIEWS........................................................................................................ 82
		11.1 FRONT GENERAL VIEW.............................................................................................. 82
		11.2 BACKHOE GENERAL VIEW............................................................................................ 83
		11.3 CAB INSIDE GENERAL VIEW......................................................................................... 84
	12. INSTRUMENTS AND CONTROLS............................................................................................. 85
		12.1 FRONT INSTRUMENTS............................................................................................... 85
		12.2 SIDE INSTRUMENTS................................................................................................ 88
		12.3 PUSH BUTTONS ON THE FRONT LOADER CONTROL LEVER.................................................................. 92
		12.4 ELECTRICAL ACCESSORIES.......................................................................................... 93
		12.5 MACHINE CONTROLS................................................................................................ 94
	13.  FUSES AND RELAYS....................................................................................................114
		13.1 EQUIPMENT FUSES AND RELAYS......................................................................................114
		13.2 ENGINE FUSES AND RELAYS.........................................................................................116
	14. GUARDS, CAB AND DRIVER'S SEAT........................................................................................118
		14.1 ENGINE HOOD.....................................................................................................118
		14.2 CANOPY..........................................................................................................118
		14.3 CAB.............................................................................................................119
		14.4 VENTILATION AND HEATING.........................................................................................121
		14.5 SEAT............................................................................................................122
		14.6 SAFETY BELT.....................................................................................................122
		14.7 FIRE EXTINGUISHER...............................................................................................123
		14.8 FIRST AID KIT...................................................................................................123
		14.9 TECHNICAL DOCUMENTATION.........................................................................................123
		14.10 ADDITIONAL TOOL CASE (IF PROVIDED).............................................................................123
	15. USE OF THE MACHINE...................................................................................................124
		15.1 CHECKS BEFORE STARTING THE ENGINE...............................................................................124
			15.1.1 VISUAL CHECKS.............................................................................................124
			15.1.2 DAILY CHECKS..............................................................................................124
			15.1.3 OPERATIONAL CHECKS........................................................................................125
		15.2 STARTING THE ENGINE.............................................................................................126
			15.2.1 STARTING WITH WARM ENGINE OR IN TEMPERATE CLIMATE (MORE THAN 0°C (32°F))..................................126
			15.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES (UP TO -16°C (3°F)).........................................127
			15.2.3 STARTING THE ENGINE IN VERY COLD AREAS (UP TO -30°C (-22°F))..............................................127
		15.3 WARMING THE ENGINE..............................................................................................128
		15.4 HEATING THE HYDRAULIC OIL.......................................................................................128
		15.5 HOW TO MOVE THE MACHINE.........................................................................................129
			15.5.1 LOCKING THE DIFFERENTIAL..................................................................................130
			15.5.2 ENGAGING THE FOUR-WHEEL DRIVE.............................................................................130
			15.5.3 WORKING ON SLOPES.........................................................................................131
			15.5.4 MAXIMUM IMMERSION DEPTH...................................................................................132
	16. PARKING THE MACHINE..................................................................................................133
		16.1 PARKING ON LEVEL GROUND.........................................................................................133
		16.2 PARKING ON SLOPES...............................................................................................134
	17. STOPPING THE ENGINE..................................................................................................135
	18. TRANSPORTING THE MACHINE ON OTHER VEHICLES...........................................................................136
		18.1 LOADING AND UNLOADING THE MACHINE...............................................................................136
		18.2 TRANSPORT.......................................................................................................137
	19. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON...........................................................................138
		19.1 FUEL AND LUBRICANTS.............................................................................................138
		19.2 COOLANT.........................................................................................................138
		19.3 BATTERY.........................................................................................................138
		19.4 OTHER PRECAUTIONS...............................................................................................139
		19.5 PRECAUTIONS TO BE TAKEN AT THE END OF WORK......................................................................139
	20. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON...........................................................................140
	21. USING THE MACHINE AS A LOADER........................................................................................141
		21.1 BUCKET POSITION INDICATOR.......................................................................................141
		21.2 ORGANIZING THE WORK AREA........................................................................................141
			21.2.1 LOADING HEAPED AND LEVEL MATERIAL.........................................................................142
			21.2.2 LOADING OPERATIONS ON SLOPES..............................................................................142
		21.3 CHANGING THE STANDARD FRONT BUCKET..............................................................................143
	22. USING THE MACHINE AS AN EXCAVATOR....................................................................................144
		22.1 POSTIONING THE BUCKET ACCORDING TO THE WORK THAT MUST BE CARRIED OUT............................................144
		22.2 POSITIONING THE MACHINE FOR DIGGING OPERATIONS..................................................................145
		22.3 DIGGING METHOD..................................................................................................146
		22.4 CHANGINE THE BACKHOE BUCKET.....................................................................................147
	23. TROUBLESHOOTING......................................................................................................148
		23.1 IF THE FUEL HAS BEEN COMPLETELY DEPLETED .......................................................................148
		23.2 IF THE BATTERY IS DEPLETED......................................................................................148
			23.2.1 STARTING WITH BOOSTER CABLES..............................................................................149
		23.3 OTHER TROUBLES..................................................................................................150
			23.3.1 ELECTRICAL CIRCUIT........................................................................................150
			23.3.2 HYDRAULIC SYSTEM..........................................................................................150
			23.3.3 BRAKING SYSTEM............................................................................................151
			23.3.4 TORQUE CONVERTER SYSTEM...................................................................................151
			23.3.5 ENGINE....................................................................................................152
MAINTENANCE..................................................................................................................154
	24. GUIDE TO MAINTENANCE.................................................................................................155
	25. MAINTENANCE NOTES....................................................................................................157
		25.1 NOTES REGARDING THE ENGINE......................................................................................157
			25.1.1 ENGINE OIL................................................................................................157
			25.1.2 COOLANT...................................................................................................157
			25.1.3 FUEL......................................................................................................158
		25.2 NOTES REGARDING THE HYDRAULIC SYSTEM............................................................................158
		25.3 NOTES REGARDING THE ELECTRICAL SYSTEM...........................................................................159
		25.4 NOTES REGARDING LUBRICATION.....................................................................................159
		25.5 PARTS THAT ARE SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING..................................................160
	26. FUEL, COOLANT AND LUBRICANTS.........................................................................................161
		26.1 LUBRICATION DIAGRAM.............................................................................................165
		26.2 LUBRICATION DIAGRAM (MULTIPURPOSE BUCKET AND PALLET FORKS)......................................................166
		26.3 LUBRICATION DIAGRAM (FRONT BUCKET RAPID COUPLINGS)..............................................................167
		26.4 LUBRICATION DIAGRAM (TELESCOPIC ARM)............................................................................168
	27. NUT AND BOLT TIGHTENING TORQUES......................................................................................169
		27.1 STANDARD TIGHTENING TORQUES.....................................................................................169
		27.2 SPECIFIC TIGHTENING TORQURE.....................................................................................169
	28. MAINTENANCE PLAN.....................................................................................................170
		28.1 CHECKS BEFORE STARTING .........................................................................................173
			28.1.A VARIOUS CHECKS............................................................................................173
			28.1.B CHECKING THE FUEL LEVEL...................................................................................173
			28.1.C CHECKING THE COOLANT LEVEL................................................................................174
			28.1.D CHECKING THE ENGINE OIL LEVEL.............................................................................174
			28.1.E CHECKING THE HYDRUALIC CIRCUIT OIL LEVEL..................................................................175
			28.1.F LUBRICATING THE JOINTS....................................................................................175
		28.2 MAINTENANCE EVERY 50 HOURS OF OPERATION.........................................................................178
			28.2.A CHECKING THE RADIATOR LEVEL...............................................................................178
			28.2.B CHECKING THE BRAKING SYSTEM OIL LEVEL.....................................................................178
			28.2.C LUBRICATING THE PROPELLER SHAFTS..........................................................................179
			28.2.D LUBRICATING THE FRONT AXLE JOINTS CENTRAL COUPLING........................................................180
			28.2.E DRAINING THE WATER SEPARATOR..............................................................................180
			28.2.F CHECKING THE TIRE PRESSURE................................................................................181
			28.2.G CHECKING THE ELECTRICAL SYSTEM............................................................................181
		28.3 MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION..............................................................182
		28.4 MAINTENANCE EVERY 250  HOURS OF OPERATION.......................................................................182
			28.4.A ADJUSTING THE FAN BELT TENSION............................................................................182
			28.4.B CLEANING THE OUTSIDE OF THE RADIATORS.....................................................................183
			28.4.C CHECKING THE BATTERY ELECTROLYTE LEVEL....................................................................183
			28.4.D CHECKING THE FRONT AXLE OIL LEVELS........................................................................184
			28.4.E CHECKING THE REAR AXLE OIL LEVELS.........................................................................184
			28.4.F CHECKING THE HYDRAULIC TRANSMISSION OIL LEVEL.............................................................185
			28.4.G CHECKING THE WHEEL NUT DRIVING TORQUE.....................................................................185
		28.5 MAINTENANCE EVERY 500 HOURS OF OPERATION........................................................................186
			28.5.A CHANGING THE ENGINE OIL...................................................................................186
			28.5.B CHANGING THE ENGINE OIL FILTER............................................................................186
			28.5.C CHANGING THE HYDRAULIC OIL FILTER.........................................................................187
			28.5.D CHANGING THE FUEL FILTER..................................................................................188
			28.5.E DRAINING THE FUEL TANK....................................................................................189
		28.6 MAINTENANCE EVERY 1000 HOURS OF OPERATION.......................................................................190
			28.6.A CHANGING THE FRONT AXLE OIL...............................................................................190
			28.6.B CHANGING THE REAR AXLE OIL................................................................................191
			28.6.C CHANGING THE HYDRAULIC TRANSMISSION OIL...................................................................192
			28.6.D CHANGING THE HYDRAULIC TRANSMISSION FILTER................................................................193
			28.6.E CHECKING AND ADJUSTING THE ENGINE VALVE CLEARANCE.........................................................193
		28.7 MAINTENANCE EVERY 2000 HOURS OF OPERATION.......................................................................194
			28.7.A CHANGING THE HYDRAULIC SYSTEM OIL AND CLEANING THE SUCTION FILTER.........................................194
			28.7.B CHANGING THE COOLANT......................................................................................196
			28.7.C CHANGING THE BRAKING SYSTEM OIL...........................................................................197
			28.7.D CHECKING THE ALTERNATOR AND THE STARTER...................................................................197
		28.8 WHEN REQUIRED...................................................................................................198
			28.8.A CHECKING, CLEANING OR CHANGING THE AIR CLEANRER CARTRIDGE.................................................198
			28.8.B CHECKING AND CLEANING THE CAB AIR FILTER..................................................................199
			28.8.C BLEEDING THE BRAKING CIRCUIT..............................................................................200
			28.8.D WASHING THE COOLING CIRCUIT...............................................................................200
			28.8.E CLEANING THE WATER SEPARATOR..............................................................................202
			28.8.F CHECKING AND ADJUSTING THE FRONT WHEEL TOE-IN.............................................................202
			28.8.G CHECKING AND ADJUSTING THE PARKING BRAKE..................................................................203
			28.8.H CHECKING THE BRAKING EFFICIENCY...........................................................................204
			28.8.J CHECKING AND ADJUSTING THE BRAKE PEDAL STROKE.............................................................205
			28.8.K ADJUSTING THE AUTOMATIC RETURN OF THE FRONT BUCKET TO THE DIGGING POSITION................................205
	29. LONG PERIODS OF INACTIVITY...........................................................................................206
		29.1 BEFORE THE PERIOD OF INACTIVITY.................................................................................206
		29.2 AFTER THE PERIOD OF INACTIVITY..................................................................................206
AUTHORIZED OPTIONAL EQUIPMENT................................................................................................208
	30. AUTHORIZED OPTIONAL EQUIPMENT........................................................................................209
		30.1 PRECAUTIONS REGARDING SAFETY....................................................................................209
		30.2 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT FOR MODEL WB140PS-2...................................................210
		30.3 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT FOR MODEL WB150PS-3...................................................211
	31. FRONT EQUIPMENT RAPID COUPLING DEVICES...............................................................................212
		31.1 MANUAL CONTROL RAPID COUPLING...................................................................................212
		31.2 HYDRAULIC CONTROL RAPID COUPLING FOR STANDARD BUCKET............................................................213
		31.3 HYDRAULIC CONTROL RAPID COUPLING FOR MULTIPURPOSE BUCKET AND OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW....213
	32. MULTIPURPOSE BUCKET..................................................................................................214
		32.1 DESCRIPTION AND CONTROLS........................................................................................214
		32.2 SAFETY DEVICES..................................................................................................214
		32.3 INSTALLING THE MULTIPURPOSE BUCKET..............................................................................215
		32.4 USING THE MULTIPURPOSE BUCKET...................................................................................216
		32.5 MAINTENANCE.....................................................................................................216
	33. PALLET FORKS.........................................................................................................217
		33.1 DESCRIPTION.....................................................................................................217
		33.2 SAFETY DEVICES..................................................................................................217
		33.3 USING THE FORKS.................................................................................................217
			33.3.1 PREPARING THE PALLET FORKS FOR USE........................................................................218
			33.3.2 OVERTURNING THE FORKS FOR TRAVEL ON ROADS.................................................................218
		33.4 REMOVING THE FORKS..............................................................................................219
		33.5 INSTALLING THE FORKS............................................................................................219
		33.6 MAINTENANCE.....................................................................................................219
	34.  BACKHOE TELESCOPIC ARM..............................................................................................220
		34.1 DESCRIPTION AND CONTROL.........................................................................................220
		34.2 SAFETY DEVICES..................................................................................................220
		34.3 USING THE TELESCOPIC ARM........................................................................................221
		34.4 MAINTENANCE.....................................................................................................221
			34.4.1 ADJUSTING THE GUIDE SLACK.................................................................................221
	35. ARRANGEMENT FOR THE INSTALLATION OF THE DEMOLITION HAMMER............................................................223
		35.1 DESCRIPTION AND CONTROL.........................................................................................223
		35.2 USE OF THE DEMOLITION HAMMER AND RULES TO BE OBSERVED...........................................................224
		35.3 INSTALLING AND REMOVING THE DEMOLITION HAMMER ..................................................................228
			35.3.1 INSTALLING THE HAMMER.....................................................................................228
			35.3.2 REMOVING THE HAMMER.......................................................................................230
		35.4 MAINTENANCE.....................................................................................................230
	36. ARRANGEMENT FOR THE OPERATION OF OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW.....................................231
		36.1 DESCRIPTION  AND CONTROL........................................................................................231
		36.2 INSTALLING AND CONNECTING THE EQUIPMENT.........................................................................231
		36.3 MAINTENANCE.....................................................................................................232
	37. ARRANGEMENT FOR THE INSTALLATION OF THE CLAMSHELL BUCKET.............................................................233
		37.1 DESCRIPTION AND CONTROL.........................................................................................233
		37.2 INSTALLING THE CLAMSHELL BUCKET.................................................................................234
		37.3 USING THE CLAMSHELL BUCKET......................................................................................235
		37.4 MAINTENANCE.....................................................................................................235
	38. ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER......................................................236
		38.1 DESCRIPTION AND CONTROL.........................................................................................236
		38.2 CONNECTING AND REMOVING THE HAMMER..............................................................................237
			38.2.1 CONNECTING THE HAMMER.....................................................................................237
			38.2.2 REMOVING THE CONNECTIONS..................................................................................237
		38.3 USING THE HAMMER................................................................................................238
		38.4 MAINTENANCE.....................................................................................................238
	39. LOAD STABILIZER SYSTEM (LSS) (OPTIONAL)..............................................................................239
		39.1 ACCUMULATOR OF THE LOAD STABILIZER SYSTEM (LSS).................................................................239
	40. AIR CONDITIONER (OPTIONAL)...........................................................................................240

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.