Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD

Description

Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD

FILE DETAILS:

Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD

Language : English
Pages : 348
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD

Product identification
Manufacturer: Liebherr-France SAS
Type: ER 954 C – High-Rise
Type no.: 1380
Conformity: CE

Introduction:

• This operating manual has been specifically devised for machine operators and maintenance personnel. It contains important warnings, information and tips regarding the maintenance and proper operation of the machine. It assists you in becoming familiar with the functions and features of the machine and helps prevent incorrect operation.
• By strictly adhering to the instructions in the operating manual, you can significantly enhance the reliability and service life of the machine.
• The operating manual is an integral part of the scope of delivery of the machine. Ensure that a copy is at all times available in the storage compartment in the operator’s cab.
• Carefully read the operating manual before starting the machine and then regularly read it again. All persons carrying out work on or with the machine must be fully familiar with the content of the operating manual and must adhere to the instructions.

• The machine owner must ensure that this operating manual is complemented with the relevant statutory regulations for accident prevention and the protection of the environment. Apart from the instructions in this operating manual and the statutory accident prevention, health and safety regulations applicable in the country of operation, all personnel working on or with the machine must adhere to best practice for safe and proper operation.
• Certain sections in this manual might not apply to your specific model.
• Some of the figures in this operating manual might show details or equipment that differ from those in your machine.
• Some of the figures show the equipment with guards or covers removed (for better depiction).
• As our products are constantly being improved, certain changes might be made to the equipment which are not referred to specifically in this operating manual.
• Should you require additional information or if you have any queries, please contact the LIEBHERR customer service department.

Warranty and liability:

• Due to the range of products (e.g. fuels, lubricants, tool attachments, spare parts) available from other manufacturers, LIEBHERR is not in a position to assess the compatibility of these products with its own machines. This also applies in relation to possible effects that third-party products have on LIEBHERR products and vice versa.
• It is therefore the responsibility of the machine owner to assess whether third-party products can be safely used in conjunction with the LIEBHERR machine. LIEBHERR shall not be liable for damage to or downtimes of LIEBHERR machine caused by the use a third-party products. Such damage is not covered by the LIEBHERR warranty.
• LIEBHERR shall not be liable for damage caused by improper operation, insufficient maintenance or non-compliance with safety instructions.

Amendments, general terms and conditions, copyright:

• We reserve the right to modify our products and amend the instructions in this operating manual without prior notice.
• The reproduction or publication of the content of this operating manual (including figures) is prohibited. LIEBHERR reserves all rights in this operating manual, including copyright.
• The warranty and liability clauses of the general business terms and conditions of LIEBHERR apply.

TABLE OF CONTENTS:

Liebherr ER 954 C High-Rise 1380 Hydraulic Excavator Operating Manual SN 32643 – PDF DOWNLOAD

1 Product description 1-1
11 Assembly – overview 1-1
111 Machine with industrial attachment 1-1
112 Uppercarriage 1-2
113 Undercarriage 1-3
12 Vibration emissions 1-3
13 Sound emission 1-4
14 EC Declaration of Conformity 1-6
15 Technical data 1-7
2 Safety instructions, Signs on the machine 2-1
21 Meaning of the symbols in this manual 2-1
22 Use in accordance with the regulations (High-Rise or High-Pedestral) 2-2
23 Safety instructions for electric excavators 2-2
24 Safety Instructions 2-5
25 Servicing the machine safely 2-17
26 Signs on the machine 2-24
261 Types of signs 2-24
262 Arrangement of signage 2-25
263 Explanation of signage 2-26
264 Type plates on the machine 2-33
3 Control and operation 3-1
31 Operating and control elements 3-1
311 Controls in the op 3-1
312 The joysticks 3-3
313 Control unit 3-7
314 Monitoring display 3-12
315 Main screen 3-14
316 Information provided in the menus 3-18
317 Preparation for external control (option) 3-31
318 Controls and instrumentation for optional equipments 3-32
32 Access and equipment of the cab 3-37
321 Access to the cab 3-37
322 Safety lever 3-39
323 Operator seat 3-40
324 Putting on and releasing the safety belt 3-43
325 Windscreen 3-43
326 Sunshade 3-44
dow 3-45
328 Interior lights 3-45
329 Fire extinguisher 3-45
3210 Viewing devices (option) 3-46
3211 The heater and air conditioner 3-47
33 Setting the machine into operation 3-55
331 Checking operations before starting the machine 3-55
332 Switching on the main supply circuit 3-58
333 Starting the electric motor 3-61
334 Shutting down the machine 3-62
335 Shutting down the machine in an emergency 3-64
336 Starting aids 3-65
337 Immobilizer with electronic ignition key (option) 3-65
34 Working with the machine 3-68
341 The travel movements 3-68
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
342 Rear motor cable drum with controls (option) 3-71
343 Independent motor cable drum (option) 3-75
344 Lateral motor cable drum with controls (option) 3-80
345 Video monitoring for motor cable drum with controls (option) 3-85
346 Travel warning device (option) 3-85
347 Uppercarriage swing movements 3-86
348 Working position 3-88
349 Working attachment control 3-89
3410 Lowering the working attachment with the engine shut down 3-91
3411 Rotating, tilting, locking and unlocking a working tool 3-91
3412 Control of additional attachments via the additional pedals 3-93
3413 AHS11 proportional control (option) 3-95
3414 Commutation of control for an additional attachment (option) 3-96
3415 Cut-off of attachment movements (option) 3-98
3416 Use of the excavator for lifting loads overhead 3-100
3417 Overload warning system (option) 3-101
3418 Adjustable hydraulic cab (option) 3-102
3419 Cab adjustable on hoist frame with double parallelogram 3-105
35 Emergency operation 3-111
351 Emergency control circuit board E52 for electric motor & servo control 3-111
352 Emergency operation of the working pumps 3-113
353 Emergency operation of boom cylinders (option) 3-114
36 Recovering, towing the machine 3-116
361 Towing with the machine, emergency towing of the machine 3-116
362 Emergency towing (option) 3-117
37 Installation and removal of attachment parts 3-120
371 Attaching and dismounting the grab on the industrial stanchion 3-120
372 Attaching and dismounting the stick to the boom 3-122
373 Mechanical quick-change adapter (option) 3-124
374 Hydraulic quick-change adapter (option) 3-128
system (option) 3-135
38 Working methods 3-138
381 Minimum impact working methods for your machine 3-138
382 Preparatory activities 3-138
383 Using a backhoe bucket 3-139
384 Loading a transport vehicle 3-141
385 Skimming 3-141
386 Using a clamshell bucket (earthmoving attachment) 3-142
387 Using a multiple tine grapple (industrial attachment) 3-145
388 Using an hydraulic hammer 3-146
39 Installation and removal of the counterweight 3-147
391 Removal of a single-piece counterweight 3-147
392 Installation of a single-piece counterweight 3-148
393 Removal of a multi-parts counterweight 3-149
394 Installation of a multi-parts counterweight 3-150
310 Transport 3-151
3101 Lifting an High-Rise machine 3-151
3102 Lifting the machine with a crane 3-155
3103 Secure the machine 3-157
4 Troubleshooting 4-1
41 Error code list 4-2
42 Troubleshooting 4-4
421 Hydraulic system 4-4
422 Travel gearbox 4-5
423 Electrical system 4-6
424 Working attachment 4-6
425 Heating and air-conditioning system 4-6
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
426 Power cable 4-8
43 Fuses and relays 4-9
431 Power switch cabinet with main fuses E50 4-9
432 A1010 printed circuit board 4-10
5 Maintenance 5-1
51 Access doors for maintenance 5-1
511 Overview of access doors 5-1
512 Door retaining rods 5-2
52 Cleaning machine 5-2
53 Care for rubber components 5-3
54 Lubricants and fluids 5-4
541 General information 5-4
542 Filling volume and lubricant chart 5-4
55 Lubricants and fluids specification 5-7
551 Lubricant for motor bearing 5-7
552 Heating fluid system 5-8
553 Checking heating fluid, adjusting mixing ratio 5-11
554 Hydraulic oil 5-14
555 Lubricants for gearboxes 5-19
556 Grease 5-20
557 Lubricants and care products for electrical and mechanical components 5-21
56 Electric motor 5-21
561 Type plate 5-21
562 Routine maintenance 5-22
563 Reversible fan (option) 5-24
57 Hydraulic system 5-25
571 Depressurising the hydraulic system 5-25
572 Checking oil level in hydraulic tank; emptying and refilling tank 5-26
573 Checking and cleaning oil cooling system 5-29
574 Return filter 5-30
575 Leak oil filter 5-31
576 Control oil filter 5-32
577 Feed line filter of the slewing gear circuit 5-33
578 Control circuit 5-33
579 Bleeding the hydraulic pumps 5-34
5710 Bleeding the hydraulic cylinders 5-36
5711 Disconnecting suction hose of pump 5-38
5712 Breather filter on hydraulic tank 5-39
5713 Bypass oil filter for hydraulic system (option) 5-40
5714 Return oil filter for hydraulic hammer (option) 5-41
5715 Servicing the hydraulic cylinder 5-42
5716 Replacing hydraulic hoses 5-43
58 Motor cable drum with controls (option) 5-44
59 Oil changes on components 5-44
591 General information 5-44
592 Swing gear – Oil level check and oil change 5-45
593 Travel gear oil change 5-46
594 Pump distributor gear – oil change 5-47
510 The track components 5-48
5101 Checking the mounting screws of the track components 5-48
5102 Checking the track chains tension 5-49
5103 Retensioning the track 5-50
5104 Releasing the track chain tension 5-50
5105 Cleaning the track components 5-51
5106 Replacing track components at “High Rise” excavators 5-52
511 Electrical installation 5-52
5111 Rotating collector 5-52
Operating manual
ER 954 C – High-Rise / 11211691
MJFCIFSS
copyright by
5112 24 V electrical system 5-54
5113 Battery care (option) 5-55
5114 Slip ring body (option) 5-56
5115 Cabinet air pressuring system (option) 5-56
512 Heating and air-conditioning system 5-57
5121 Recirculated and ambient air filters 5-58
5122 Heating system 5-59
5123 Air-conditioning system 5-60
513 Greasing the machine 5-63
5131 The centralized lubrication system 5-63
5132 Semi automatic and full automatic systems 5-65
5133 Operation of the semi automatic system 5-65
5134 Operation of the full automatic system 5-66
5135 Emergency lubrication with defective lubrication system 5-68
5136 To refill a grease container 5-68
5137 Changes in the lubrication circuit 5-69
5138 Greasing the grab (optional extra) 5-70
514 Quick-change systems 5-71
5141 Greasing the mechanical quick-change adapter (option) 5-71
5142 Hydraulic quick-change adapter (option) 5-71
5143 LIKUFIX (option) 5-72
515 Check mounting bolts for tightness 5-73
5151 Mounting bolts of the counterweight 5-74
5152 Mounting screws of the swing ring 5-74
5153 Mounting screws of the hydraulic oil and fuel tank 5-75
5154 Mounting screws of the swing gear and motor 5-75
5155 Mounting bolts central piece to side frames (option “removable side frames”) 5-75
5156 Mounting screws of the track frames and the elevation (High-Rise machines) 5-76
5157 Fixing bolts of catwalks around the upperstructure 5-76
516 Drive unit brakes and swing gear brakes 5-77
517 General maintenance points 5-77
5171 Replacing working parts 5-77
5172 Checking or replacing the teeth on the bucket 5-78
5173 Welding work on the machine 5-80
518 Inspection and maintenance schedule 5-80

IMAGES PREVIEW OF THE MANUAL:

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V