Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF
$29.95
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 110 C Litronic
Type no.: 1228 (USA / CAN)
From Serial no.: 115021
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF DOWNLOAD
Language : English
Pages : 404
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 110 C Litronic
Type no.: 1228 (USA / CAN)
From Serial no.: 115021
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr LH 110 C Litronic 1228 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 115021 – PDF DOWNLOAD
1 Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.2 Technical data 19
1.2.1 Vibration emission 19
1.2.2 CO2 emissions of diesel engine 19
1.2.3 Sound level 20
1.2.4 Specifications 21
1.3 Warranty conditions 22
1.3.1 Additional information, USA 22
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 22
1.3.3 Warranty coverage from manufacturer 22
1.3.4 Warranty obligations of the owner 23
1.3.5 Warranty 23
1.3.6 Warranty parts 23
1.3.7 Exclusions 24
2 Safety warnings 25
2.1 Information on these instructions 25
2.1.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Intended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
225 Disposal 28
2.3 Description of staff 29
copyright © Liebherr-Hydraulikbagger GmbH 2019
LH 110.G Livoric – 1228 (USA/CAN) pyrig LIEBHERR 7
Contents Operator’s manual
2.3.1 Personal protective equipment 29
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.2 Technical data 19
1.2.1 Vibration emission 19
1.2.2 CO2 emissions of diesel engine 19
1.2.3 Sound level 20
1.2.4 Specifications 21
1.3 Warranty conditions 22
1.3.1 Additional information, USA 22
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 22
1.3.3 Warranty coverage from manufacturer 22
1.3.4 Warranty obligations of the owner 23
1.3.5 Warranty 23
1.3.6 Warranty parts 23
1.3.7 Exclusions 24
2 Safety warnings 25
2.1 Information on these instructions 25
2.1.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Intended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
225 Disposal 28
2.3 Description of staff 29
copyright © Liebherr-Hydraulikbagger GmbH 2019
LH 110.G Livoric – 1228 (USA/CAN) pyrig LIEBHERR 7
Contents Operator’s manual
2.3.1 Personal protective equipment 29
23.2 Requirements for staff 29
2.3.3 Operating company 30
2.3.4 Operator 30
2.3.5 Maintenance staff 31
2.3.6 Electrical engineer 32
2.3.7 Refrigeration technician 33
2.3.8 Slinger 33
2.3.9 Spotter 34
2.4 Signs on the machine 35
2.41 Safety signs (USA) 35
2.41 Safety signs (USA) 35
2.42 Information signs 38
2.4.3 Identification tag (USA) 42
2.5 Protective devices on the machine 42
2.51 Safety lever or folding console 42
2.51 Safety lever or folding console 42
2.5.2 Operator’s cab 42
2.5.3 Height-adjustable operator’s cab 43
2.54 Roll over protective structure (ROPS) 43
2.5.5 Falling object protective structures (FOPS and FGPS) 44
2.6 Emergency equipment on the machine 44
2.6.1 Emergency exit (standard) 44
2.6.1 Emergency exit (standard) 44
2.6.2 Fire extinguisher (option) 44
2.6.3 Emergency command devices of machine 45
2.6.4 Emergency stop function of machine 45
2.7 Safe operation 45
2.71 Intoxicants 45
2.71 Intoxicants 45
2.7.2 Dangerous fuels and operating fluids 46
2.7.3 Transporting machine 46
2.7.4 Access to machine 47
2.7.5 Machine danger zone 48
2.7.6 Visibility 48
2.7.7 Protection against vibration 49
2.7.8 Operation of machine 50
2.7.9 Load-lifting work 52
2.8 Safe work 53
8 Tr LIEBHERR or 2019 LH 110 C Livoric – 1228 (USA CAN)
8 Tr LIEBHERR or 2019 LH 110 C Livoric – 1228 (USA CAN)
LHBM2252547/01/2018-06-27/en
LHBM2252547/01/2019-08-27/en
LHBM2252547/01/2019-08-27/en
Operator’s manual Contents
2.8.1 Machines with height adjustable cab 53
2.9 Safe maintenance 53
2.9.1 Spare parts 53
2.9.1 Spare parts 53
29.2 Heavy parts 54
2.9.3 Regular checks 54
2.10 Modifications to the machine 54
2.10.1 Modifications, add-ons and retrofittings 54
2.10.1 Modifications, add-ons and retrofittings 54
3 Control and operation 57
3.1 Control and operating elements 57
3.1.1 Overview of operator’s platform 57
3.1 Control and operating elements 57
3.1.1 Overview of operator’s platform 57
3.1.2 Control unit A 59
3.1.3 Control unit B 80
3.1.4 Further control units 60
3.1.5 Symbols on control description sticker 61
3.1.6 General symbols 61
3.1.7 Control changeover 82
3.1.8 Optional equipment 62
3.1.9 Working tools 63
3.1.10 Working attachment 64
3.1.11 Support 66
3.1.12 Height-adjustable cab 67
3.1.13 Wheeled excavator travel mode 67
3.1.14 Crawler excavator travel mode 67
3.1.15 Rail excavator travel mode 68
3.1.10 Working attachment 64
3.1.11 Support 66
3.1.12 Height-adjustable cab 67
3.1.13 Wheeled excavator travel mode 67
3.1.14 Crawler excavator travel mode 67
3.1.15 Rail excavator travel mode 68
3.2 Display 69
3.2.1 Display 69
3.2.1 Display 69
3.2.2 Status symbols 70
3.2.3 Start page menu 83
3.24 Camera menu 84
3.2.5 Automatic air conditioning 85
3.2.6 Operating status menu 89
3.2.7 Diesel particulate filter submenu (option) 90
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 90
submenu (option) 90
Control
System settings menu 91
Operating hour meter and odometer submenu 92
Windscreen wiper interval submenu 93
Radio remote control submenu 93
Display settings submenu 94
Display brightness and display volume submenu 94
Camera image contrast submenu 95
Camera return time submenu 95
Regional settings and system parameters submenu 96
Unit selection submenu 97
System diagnosis submenu 97
Time zone submenu 98
Time format and date format submenu 98
Language selection submenu 99
Electrical outputs submenu 99
Electrical inputs submenu 100
Function settings menu 101
Central lubrication system submenu (option) 102
Maintenance submenu 103
SF submenu 105
User profile submenu 107
Stick cylinder shut-off submenu (option) 108
Hoist cylinder shut-off submenu (option) 108
Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 109
Workspace limitation submenu (option) 110
Automatic reversible fan drive submenu (option) 110
Comfort slewing brake submenu (option) 11
Bleeding hydraulic circuit submenu 112
Information menu 112
Operating time submenu 113
Fuel consumption submenu 114
Key assignment submenu 114
Tool Control menu 115
Service codes menu 116
Operating hour meter and odometer submenu 92
Windscreen wiper interval submenu 93
Radio remote control submenu 93
Display settings submenu 94
Display brightness and display volume submenu 94
Camera image contrast submenu 95
Camera return time submenu 95
Regional settings and system parameters submenu 96
Unit selection submenu 97
System diagnosis submenu 97
Time zone submenu 98
Time format and date format submenu 98
Language selection submenu 99
Electrical outputs submenu 99
Electrical inputs submenu 100
Function settings menu 101
Central lubrication system submenu (option) 102
Maintenance submenu 103
SF submenu 105
User profile submenu 107
Stick cylinder shut-off submenu (option) 108
Hoist cylinder shut-off submenu (option) 108
Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 109
Workspace limitation submenu (option) 110
Automatic reversible fan drive submenu (option) 110
Comfort slewing brake submenu (option) 11
Bleeding hydraulic circuit submenu 112
Information menu 112
Operating time submenu 113
Fuel consumption submenu 114
Key assignment submenu 114
Tool Control menu 115
Service codes menu 116
3.3.1 Battery main switch 117
3.3.2 Entering and exiting machine 118
3.3.3 Step lighting (option) 119
3.3.4 Emergency exit 120
3.3.5 Fire extinguisher (option) 120
3.3.6 Folding console 121
3.3.7 Operator’s seat 122
3.3.8 Safety belt 128
3.3.9 Exit protection (option) 130
3.3.10 Ignition key 131
3.3.11 Confirmation button 131
3.3.12 Horn 132
3.3.13 Raising and lowering operator’s cab (option) 133
3.3.14 Windscreen 135
3.3.15 Sun blind 137
3.3.16 Viewing devices 138
3.3.17 Lighting 140
3.3.18 Cab lighting system 141
3.3.19 Beacon (option) 142
3.3.20 Windscreen wipers 143
3.3.21 Windscreen washer system 143
3.3.22 Auxiliary heater (option) 144
3.3.23 LiDAT (option) 144
3.4 Operation 145
3.4.1 Inspection tour before putting into service 145
3.4.2 Refuelling 146
3.43 Refuelling with electric refuelling pump (option) 146
3.4.4 Filling with diesel exhaust fluid 148
3.45 Preheating system for fuels and operating fluids (option) 149
3.46 Immobiliser (option) 150
3.4.7 Preparing machine for dust intensive application 152
3.4.8 Preparing machine for use in biologically sensitive areas 152
3.4.9 Operator code (option) 163
3.4.10 Starting diesel engine 154
3.4.11 Bringing machine to operating temperature 154
Li 1 0c Litronic – 1228 (USA / GAN) LIEBHERR orzo ”
Contents Operator’s manual
3.4.12 Engine speed and operating mode 155
3.413 After starting 156
3.4.14 Sensor-controlled low idle automatic 157
3.4.15 Automatic engine stop after idling (option) 158
3.4.16 Shutting off diesel engine 159
3.4.17 Shutting off diesel engine in an emergency 159
3.4.18 Travelling and braking 160
3.4.19 Travel alarm (option) 162
3.4.20 Controlling working attachment 163
3.4.21 Turning and braking uppercarriage 164
3.4.22 Slewing brake 165
3.4.23 Positioning slewing brake 170
3.4.24 Hoist cylinder pressure warning device (option) 170
3.4.25 Lowering boom actively (option) 170
3.4.26 Retracting stick actively (option) 171
3.4.27 Selecting the working tool 171
3.4.28 Controlling special working attachment with mini-joystick 172
3.4.29 Changing over control of right mini-joystick (option) 173
3.4.30 Grapple priority (option) 174
3.4.31 AutoLift (Option) 175
3.4.32 Magnet system (option) 175
3.4.33 Reversible fan drive for radiator cleaning (option) 177
3.3.2 Entering and exiting machine 118
3.3.3 Step lighting (option) 119
3.3.4 Emergency exit 120
3.3.5 Fire extinguisher (option) 120
3.3.6 Folding console 121
3.3.7 Operator’s seat 122
3.3.8 Safety belt 128
3.3.9 Exit protection (option) 130
3.3.10 Ignition key 131
3.3.11 Confirmation button 131
3.3.12 Horn 132
3.3.13 Raising and lowering operator’s cab (option) 133
3.3.14 Windscreen 135
3.3.15 Sun blind 137
3.3.16 Viewing devices 138
3.3.17 Lighting 140
3.3.18 Cab lighting system 141
3.3.19 Beacon (option) 142
3.3.20 Windscreen wipers 143
3.3.21 Windscreen washer system 143
3.3.22 Auxiliary heater (option) 144
3.3.23 LiDAT (option) 144
3.4 Operation 145
3.4.1 Inspection tour before putting into service 145
3.4.2 Refuelling 146
3.43 Refuelling with electric refuelling pump (option) 146
3.4.4 Filling with diesel exhaust fluid 148
3.45 Preheating system for fuels and operating fluids (option) 149
3.46 Immobiliser (option) 150
3.4.7 Preparing machine for dust intensive application 152
3.4.8 Preparing machine for use in biologically sensitive areas 152
3.4.9 Operator code (option) 163
3.4.10 Starting diesel engine 154
3.4.11 Bringing machine to operating temperature 154
Li 1 0c Litronic – 1228 (USA / GAN) LIEBHERR orzo ”
Contents Operator’s manual
3.4.12 Engine speed and operating mode 155
3.413 After starting 156
3.4.14 Sensor-controlled low idle automatic 157
3.4.15 Automatic engine stop after idling (option) 158
3.4.16 Shutting off diesel engine 159
3.4.17 Shutting off diesel engine in an emergency 159
3.4.18 Travelling and braking 160
3.4.19 Travel alarm (option) 162
3.4.20 Controlling working attachment 163
3.4.21 Turning and braking uppercarriage 164
3.4.22 Slewing brake 165
3.4.23 Positioning slewing brake 170
3.4.24 Hoist cylinder pressure warning device (option) 170
3.4.25 Lowering boom actively (option) 170
3.4.26 Retracting stick actively (option) 171
3.4.27 Selecting the working tool 171
3.4.28 Controlling special working attachment with mini-joystick 172
3.4.29 Changing over control of right mini-joystick (option) 173
3.4.30 Grapple priority (option) 174
3.4.31 AutoLift (Option) 175
3.4.32 Magnet system (option) 175
3.4.33 Reversible fan drive for radiator cleaning (option) 177
3.5 Shut-off functions 180
3.5.1 Stick cylinder shut-off (option) 180
3.5.1 Stick cylinder shut-off (option) 180
3.5.2 Hoist cylinder shut-off (option) 183
3.5.3 Height limitation 187
3.5.4 Depth limitation (option) 197
3.5.5 Overload warning system (option) 205
3.5.6 Load moment limitation (option) 206
3.6 General working methods 213
3.6.1 Working without damaging the machine 213
3.6.1 Working without damaging the machine 213
3.6.2 Putting machine in working position 214
3.6.3 Travelling at operating location 215
3.6.4 Travelling with load at operating location 216
3.6.5 Travelling under obstacles 217
3.6.6 Handling loads 217
3.6.7 Loading transport vehicle 218
3.6.8 Lifting loads 218
36.9 Use of banksmen 219
3.6.10 Working in windy conditions 226
3.7 Installing and removing working attachment 228
3.7.1 Using quick coupler 228
3.7.2 Installing and removing grapple on industrial stick 228
3.7.3 Installing and removing boom 231
3.8 Parking machine 232
3.9 Transport and assembly 233
3.10 Emergency operation 234
3.10.1 Jump starting 234
3.10.2 Lowering working attachment when engine is shut off 235
3.10.3 Lowering operator’s cab in an emergency (option) 235
3.10.4 Towing the machine 236
4 Malfunctions 237
4.1 Service code tables 237
41.1 Warning symbols 237
4.2 Fault – Cause – Remedy 244
4.21 Diesel engine and fuel system 244
4.2.2 Hydraulic system 247
423 Travel gear 248
4.24 Electrical system 248
4.25 Heating, ventilation and air conditioning unit 248
426 Working attachment 249
4.3 Problem remedy 250
4.3.1 Fuses and relays in the uppercarriage 250
4.3.2 Operator’s platform fuses and relays 256
5 Maintenance 263
5.1 Inspection and maintenance schedule 263
5.2 Filling quantities and lubrication chart 268
5.2.1 Filling quantities 268
Li 110 C Litronic – 1228 (USA / CAN) LIEBHERR pr20t9 13
5021
Contents Operator’s manual
5.3 Fuels, lubricants and operating fluids 270
5.3.1 General information about lubricants and fuels 270
5.3.2 Diesel fuels 270
5.3.3 Diesel exhaust fluids 271
5.3.4 Engine oils 272
5.3.5 Refrigerant 273
5.3.6 Coolant 274
5.3.7 Hydraulic oils 275
5.3.8 Gear oils 277
5.3.9 Pump distributor gear oils 278
5.3.10 Energy recuperation cylinder oils 279
5.3.11 Greases 279
5.3.12 Windscreen washer fluid 279
5.3.13 Lubricants and care products for electrical and mechanical systems 280
5.4 Access points for maintenance work 281
5.4.1 Access points under the uppercarriage 281
5.4.2 Access points on undercarriage 282
5.5 Preparing for maintenance 283
5.5.1 Maintenance procedures 283
5.5.2 Preparing for maintenance 284
5.5.3 Putting machine in maintenance position 286
56 General maintenance 287
5.6.1 Welding 287
5.6.2 Corrosion-proofing piston rods 287
5.6.3 Cleaning the machine 288
5.6.4 Cleaning travel gear 289
5.6.5 Cleaning the fan and radiator 290
5.7 Complete machine 291
5.7.1 Lubricating bearings on machine and working attachment 291
5021
Contents Operator’s manual
5.3 Fuels, lubricants and operating fluids 270
5.3.1 General information about lubricants and fuels 270
5.3.2 Diesel fuels 270
5.3.3 Diesel exhaust fluids 271
5.3.4 Engine oils 272
5.3.5 Refrigerant 273
5.3.6 Coolant 274
5.3.7 Hydraulic oils 275
5.3.8 Gear oils 277
5.3.9 Pump distributor gear oils 278
5.3.10 Energy recuperation cylinder oils 279
5.3.11 Greases 279
5.3.12 Windscreen washer fluid 279
5.3.13 Lubricants and care products for electrical and mechanical systems 280
5.4 Access points for maintenance work 281
5.4.1 Access points under the uppercarriage 281
5.4.2 Access points on undercarriage 282
5.5 Preparing for maintenance 283
5.5.1 Maintenance procedures 283
5.5.2 Preparing for maintenance 284
5.5.3 Putting machine in maintenance position 286
56 General maintenance 287
5.6.1 Welding 287
5.6.2 Corrosion-proofing piston rods 287
5.6.3 Cleaning the machine 288
5.6.4 Cleaning travel gear 289
5.6.5 Cleaning the fan and radiator 290
5.7 Complete machine 291
5.7.1 Lubricating bearings on machine and working attachment 291
5.7.2 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 292
5.7.3 Checking rescue system (option) 293
5.7.4 Filling in sample data sheet 294
5.8 Drive group 300
5.8.1 Diesel engine: Bringing into maintenance position 300
14 LIEBHERR or 2019 LH 110 C Livoric – 1228 (USA CAN)
windows 292
5.7.3 Checking rescue system (option) 293
5.7.4 Filling in sample data sheet 294
5.8 Drive group 300
5.8.1 Diesel engine: Bringing into maintenance position 300
14 LIEBHERR or 2019 LH 110 C Livoric – 1228 (USA CAN)
LHBM2252547/01/2018-06-27/en
LHBM2252547/01/2019-08-27/en
LHBM2252547/01/2019-08-27/en
Operator’s manual Contents
5.8.2 Diesel engine: Checking oil level 300
5.8.3 Fuel pre-filter: Draining water 301
5.8.4 Fuel tank: Draining water and sediments 302
5.8.5 Air filter: Emptying dust collecting tank 304
5.8.6 Air filter: Replacing main filter cartridge 305
5.8.7 Air filter: Replacing safety filter cartridge 307
5.8.8 Pump distributor gear: Checking oil level 309
5.8.9 Diesel particulate filter: Activating and deactivating regeneration 310
5.9 Cooling system 317
5.9.1 Checking coolant level 317
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 318
5.10 Working hydraulics 321
5.10.1 Depressurising hydraulic system 321
5.10.2 Hydraulic tank: Checking oil level 321
5.10.3 Hydraulic tank: Draining water and sediments 324
5.10.4 Return filter: Checking and cleaning magnetic rod 326
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 327
5.11 Electrical system 328
5.11.1 General information 328
5.12 Travel gear 329
5.12.1 Checking track tension 329
5.12.2 Tightening track 330
5.12.3 Slackening track 331
5.12.4 Determining track type 332
5.12.5 Checking tracks, sprocket wheels, idler-wheels, carrier rollers and track
rollers for wear 333
5.12.6 Visual inspection of travel gear components 333
5.13 Working attachment 334
5.13.1 Lubricating working tool 334
5.13.2 Pin bearing: checking for wear 334
5.14 Operator’s cab, heating and air conditioning 335
5.14.1 Filling with windscreen washer fluid 335
5.14.2 Heating: Checking function 335
5.14.3 Auxiliary heater (option): Checking function 337
LH 110 C Litronic – 1228 (USA / CAN) Pe pao wa 2019
1115021 LIEBHERR 15
Contents Operator’s manual
5.8.2 Diesel engine: Checking oil level 300
5.8.3 Fuel pre-filter: Draining water 301
5.8.4 Fuel tank: Draining water and sediments 302
5.8.5 Air filter: Emptying dust collecting tank 304
5.8.6 Air filter: Replacing main filter cartridge 305
5.8.7 Air filter: Replacing safety filter cartridge 307
5.8.8 Pump distributor gear: Checking oil level 309
5.8.9 Diesel particulate filter: Activating and deactivating regeneration 310
5.9 Cooling system 317
5.9.1 Checking coolant level 317
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 318
5.10 Working hydraulics 321
5.10.1 Depressurising hydraulic system 321
5.10.2 Hydraulic tank: Checking oil level 321
5.10.3 Hydraulic tank: Draining water and sediments 324
5.10.4 Return filter: Checking and cleaning magnetic rod 326
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 327
5.11 Electrical system 328
5.11.1 General information 328
5.12 Travel gear 329
5.12.1 Checking track tension 329
5.12.2 Tightening track 330
5.12.3 Slackening track 331
5.12.4 Determining track type 332
5.12.5 Checking tracks, sprocket wheels, idler-wheels, carrier rollers and track
rollers for wear 333
5.12.6 Visual inspection of travel gear components 333
5.13 Working attachment 334
5.13.1 Lubricating working tool 334
5.13.2 Pin bearing: checking for wear 334
5.14 Operator’s cab, heating and air conditioning 335
5.14.1 Filling with windscreen washer fluid 335
5.14.2 Heating: Checking function 335
5.14.3 Auxiliary heater (option): Checking function 337
LH 110 C Litronic – 1228 (USA / CAN) Pe pao wa 2019
1115021 LIEBHERR 15
Contents Operator’s manual
5.14.4 Switching on air conditioning unit 337
5.14.5 Checking and cleaning condenser 338
5.14.5 Checking and cleaning condenser 338
5.15 Lubrication system 340
5.15.1 Lubrication system: Filling with grease 340
5.15.2 Checking lubrication of bearings (grease collar) 341
5.15.1 Lubrication system: Filling with grease 340
5.15.2 Checking lubrication of bearings (grease collar) 341
5.16 Slewing gearbox and slewing ring 342
5.16.1 Slewing gearbox: Checking oil level 342
5.16.1 Slewing gearbox: Checking oil level 342
6 Appendix 345
6.1 Symbols on control description sticker 345
6.1 General symbols 345
6.1 Control changeover 346
6.1 Optional equipment 347
6.1 Working tools 347
6.1 Working attachment 349
6.1 Support 351
6.1 Height-adjustable cab 351
6.1 Wheeled excavator travel mode 352
6.1 Crawler excavator travel mode 352
6.1 Rail excavator travel mode 353
Index 355
6.1 Symbols on control description sticker 345
6.1 General symbols 345
6.1 Control changeover 346
6.1 Optional equipment 347
6.1 Working tools 347
6.1 Working attachment 349
6.1 Support 351
6.1 Height-adjustable cab 351
6.1 Wheeled excavator travel mode 352
6.1 Crawler excavator travel mode 352
6.1 Rail excavator travel mode 353
Index 355
IMAGES PREVIEW OF THE MANUAL:
Customer Support: [email protected]
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V
