Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
$28.95
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 110 C Litronic High Rise
Type no.: 1228
From Serial no.: 79878
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
Language : English
Pages : 366
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 110 C Litronic High Rise
Type no.: 1228
From Serial no.: 79878
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr LH 110 C Litronic High Rise 1228 Machine for Industrial Applications Operator’s Manual SN 79878 – PDF DOWNLOAD
1 Product description 19
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 CO2 emissions of diesel engine 21
1.2.3 Sound level 22
1.2.4 Specifications 23
2 Safety warnings 25
2.1 Information on these instructions 25
21.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Foreseeable misuse 26
2.2.3 Operating conditions 27
2.2.4 Disposal 28
2.3 Description of staff 28
2.3.1 Personal protective equipment 28
2.3.2 Requirements for staff 29
2.3.3 Operating company 29
2.3.4 Operator 30
2.3.5 Maintenance staff 30
2.3.6 Electrical engineer 31
2.3.7 Refrigeration technician 32
2.3.8 Slinger 33
2.3.9 Spotter 33
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 CO2 emissions of diesel engine 21
1.2.3 Sound level 22
1.2.4 Specifications 23
2 Safety warnings 25
2.1 Information on these instructions 25
21.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Foreseeable misuse 26
2.2.3 Operating conditions 27
2.2.4 Disposal 28
2.3 Description of staff 28
2.3.1 Personal protective equipment 28
2.3.2 Requirements for staff 29
2.3.3 Operating company 29
2.3.4 Operator 30
2.3.5 Maintenance staff 30
2.3.6 Electrical engineer 31
2.3.7 Refrigeration technician 32
2.3.8 Slinger 33
2.3.9 Spotter 33
Signs on the machine 34
2.41 Warning signs 34
2.42 Information signs 39
2.4.3 Control description sticker 43
2.4.4 Identification plate 44
Protective devices on the machine 44
2.51 Safety lever or folding console 44
2.5.2 Operator’s cab 44
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Roll over protective structure (ROPS) 45
2.5.5 Falling object protective structures (FOPS and FGPS) 46
Emergency equipment on the machine 46
2.6.1 Emergency exit (rescue system) 46
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 47
Safe operation 48
2.71 Intoxicants 48
2.7.2 Dangerous fuels and operating fluids 48
2.7.3 Transporting machine 48
2.7.4 Access to machine 49
2.7.5 Machine danger zone 50
2.7.6 Visibility 50
2.7.7 Protection against vibration 51
2.7.8 Operation of machine 52
2.7.9 Load-lifting work 54
Safe work 55
2.8.1 Machine with turret 55
2.8.2 Machines with height adjustable cab 55
Safe maintenance 56
2.9.1 Spare parts 56
29.2 Heavy parts 56
29.3 Regular checks 57
Modifications to the machine 57
2.10.1 Modifications, add-ons and retrofittings 57
2.41 Warning signs 34
2.42 Information signs 39
2.4.3 Control description sticker 43
2.4.4 Identification plate 44
Protective devices on the machine 44
2.51 Safety lever or folding console 44
2.5.2 Operator’s cab 44
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Roll over protective structure (ROPS) 45
2.5.5 Falling object protective structures (FOPS and FGPS) 46
Emergency equipment on the machine 46
2.6.1 Emergency exit (rescue system) 46
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 47
Safe operation 48
2.71 Intoxicants 48
2.7.2 Dangerous fuels and operating fluids 48
2.7.3 Transporting machine 48
2.7.4 Access to machine 49
2.7.5 Machine danger zone 50
2.7.6 Visibility 50
2.7.7 Protection against vibration 51
2.7.8 Operation of machine 52
2.7.9 Load-lifting work 54
Safe work 55
2.8.1 Machine with turret 55
2.8.2 Machines with height adjustable cab 55
Safe maintenance 56
2.9.1 Spare parts 56
29.2 Heavy parts 56
29.3 Regular checks 57
Modifications to the machine 57
2.10.1 Modifications, add-ons and retrofittings 57
3 Control and operation 59
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 81
3.1.4 Further control units 62
3.2 Display 63
3.2.1 Display 63
3.22 Status symbols 64
3.23 Start page menu 77
3.2.4 Camera menu 78
3.2.5 Automatic air conditioning 79
3.2.6 Operating status menu 83
3.2.7 Diesel particulate filter submenu (option) 83
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 81
3.1.4 Further control units 62
3.2 Display 63
3.2.1 Display 63
3.22 Status symbols 64
3.23 Start page menu 77
3.2.4 Camera menu 78
3.2.5 Automatic air conditioning 79
3.2.6 Operating status menu 83
3.2.7 Diesel particulate filter submenu (option) 83
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 84
3.2.9 System settings menu 85
3.2.10 Operating hour meter and odometer submenu 86
3.2.11 Windscreen wiper interval submenu 86
3.2.12 Radio remote control submenu 87
3.2.13 Display settings submenu 88
3.2.14 Display brightness and display volume submenu 88
3.2.15 Camera image contrast submenu 89
3.2.16 Camera return time submenu 89
3.2.17 Regional settings and system parameters submenu 90
3.2.18 Unit selection submenu 90
3.2.19 System diagnosis submenu 91
3.2.20 Time zone submenu 91
3.2.21 Time format and date format submenu 92
3.2.22 Language selection submenu 92
3.2.23 Electrical outputs submenu 93
3.2.24 Electrical inputs submenu 94
3.2.25 Function settings menu 94
3.2.26 Central lubrication system submenu (option) 96
3.2.27 Maintenance submenu 96
submenu (option) 84
3.2.9 System settings menu 85
3.2.10 Operating hour meter and odometer submenu 86
3.2.11 Windscreen wiper interval submenu 86
3.2.12 Radio remote control submenu 87
3.2.13 Display settings submenu 88
3.2.14 Display brightness and display volume submenu 88
3.2.15 Camera image contrast submenu 89
3.2.16 Camera return time submenu 89
3.2.17 Regional settings and system parameters submenu 90
3.2.18 Unit selection submenu 90
3.2.19 System diagnosis submenu 91
3.2.20 Time zone submenu 91
3.2.21 Time format and date format submenu 92
3.2.22 Language selection submenu 92
3.2.23 Electrical outputs submenu 93
3.2.24 Electrical inputs submenu 94
3.2.25 Function settings menu 94
3.2.26 Central lubrication system submenu (option) 96
3.2.27 Maintenance submenu 96
3.2.28 SF submenu 98
3.2.29 Stick cylinder shut-off submenu (option) 100
3.2.30 Hoist cylinder shut-off submenu (option) 101
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 101
3.2.32 Workspace limitation submenu (option) 102
3.2.33 Automatic reversible fan drive submenu (option) 102
3.2.34 Comfort slewing brake submenu (option) 103
3.2.35 Bleeding hydraulic circuit submenu 104
3.2.36 Information menu 104
3.2.37 Operating time submenu 105
3.2.38 Fuel consumption submenu 106
3.2.39 Key assignment submenu 106
3.2.40 Tool Control menu 107
3.2.41 Service codes menu 107
Control 109
3.3.1 Battery main switch 109
3.3.2 Entering and exiting machine 110
3.3.3 Step lighting (option) 111
3.3.4 Emergency exit 11
3.3.5 Emergency exit — two-way adjustable operator’s cab LHC D-730
3.2.29 Stick cylinder shut-off submenu (option) 100
3.2.30 Hoist cylinder shut-off submenu (option) 101
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 101
3.2.32 Workspace limitation submenu (option) 102
3.2.33 Automatic reversible fan drive submenu (option) 102
3.2.34 Comfort slewing brake submenu (option) 103
3.2.35 Bleeding hydraulic circuit submenu 104
3.2.36 Information menu 104
3.2.37 Operating time submenu 105
3.2.38 Fuel consumption submenu 106
3.2.39 Key assignment submenu 106
3.2.40 Tool Control menu 107
3.2.41 Service codes menu 107
Control 109
3.3.1 Battery main switch 109
3.3.2 Entering and exiting machine 110
3.3.3 Step lighting (option) 111
3.3.4 Emergency exit 11
3.3.5 Emergency exit — two-way adjustable operator’s cab LHC D-730
(option) 114
3.3.6 Fire extinguisher (option) 115
3.3.7 Folding console 115
3.3.8 Operator’s seat 117
3.3.9 Safety belt 123
3.3.10 Exit protection (option) 124
3.3.11 Ignition key 125
3.3.12 Confirmation button 125
3.3.13 Horn 127
3.3.14 Raising and lowering operator’s cab (option) 127
3.3.15 Raising and lowering two-way adjustable cab (option) 129
3.3.16 Windscreen 132
3.3.17 Sun blind 134
3.3.18 Viewing devices 135
3.3.19 Lighting 137
3.3.6 Fire extinguisher (option) 115
3.3.7 Folding console 115
3.3.8 Operator’s seat 117
3.3.9 Safety belt 123
3.3.10 Exit protection (option) 124
3.3.11 Ignition key 125
3.3.12 Confirmation button 125
3.3.13 Horn 127
3.3.14 Raising and lowering operator’s cab (option) 127
3.3.15 Raising and lowering two-way adjustable cab (option) 129
3.3.16 Windscreen 132
3.3.17 Sun blind 134
3.3.18 Viewing devices 135
3.3.19 Lighting 137
3.3.20 Cab lighting system 138
3.3.21 Beacon (option) 139
3.3.22 Windscreen wipers 140
3.3.23 Windscreen washer system 140
3.3.24 Auxiliary heater (option) 141
3.3.25 LiDAT (option) 141
3.4 Operation 142
3.4.1 Inspection tour before putting into service 142
34.2 Refuelling 143
3.4.3 Refuelling with electric refuelling pump (option) 144
3.4.4 Filling with diesel exhaust fluid 145
3.45 Preheating system for fuels and operating fluids (option) 146
3.4.6 Immobiliser (option) 148
3.4.7 Preparing machine for dust intensive application 150
3.4.8 Preparing machine for use in biologically sensitive areas 150
3.4.9 Operator code (option) 150
3.4.10 Starting diesel engine 161
3.4.11 Bringing machine to operating temperature 152
3.4.12 Engine speed and operating mode 152
3.4.13 After starting 154
3.4.14 Sensor-controlled low idle automatic 155
3.4.15 Automatic engine stop after idling (option) 155
3.4.16 Shutting off diesel engine 156
3.4.17 Shutting off diesel engine in an emergency 157
3.4.18 Travel alarm (option) 157
3.4.19 Observe the inclination angle 168
3.4.20 Controlling working attachment 159
3.4.21 Turning and braking uppercarriage 160
3.422 Slewing brake 161
3.4.23 Positioning slewing brake 166
3.4.24 Hoist cylinder pressure warning device (option) 166
3.4.25 Lowering boom actively (option) 166
3.4.26 Retracting stick actively (option) 167
3.4.27 Selecting the working tool 167
3.4.28 Controlling special working attachment with mini-joystick 168
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 110 C Litronic – 1228 / 79878 LIEBHERR 13
Contents Operator’s manual
3.4.29 Changing over control of right mini-joystick (option) 169
3.4.30 Grapple priority (option) 170
3.4.31 AutoLift (Option) 171
3.4.32 Magnet system (option) 171
3.4.33 Reversible fan drive for radiator cleaning (option) 173
3.3.21 Beacon (option) 139
3.3.22 Windscreen wipers 140
3.3.23 Windscreen washer system 140
3.3.24 Auxiliary heater (option) 141
3.3.25 LiDAT (option) 141
3.4 Operation 142
3.4.1 Inspection tour before putting into service 142
34.2 Refuelling 143
3.4.3 Refuelling with electric refuelling pump (option) 144
3.4.4 Filling with diesel exhaust fluid 145
3.45 Preheating system for fuels and operating fluids (option) 146
3.4.6 Immobiliser (option) 148
3.4.7 Preparing machine for dust intensive application 150
3.4.8 Preparing machine for use in biologically sensitive areas 150
3.4.9 Operator code (option) 150
3.4.10 Starting diesel engine 161
3.4.11 Bringing machine to operating temperature 152
3.4.12 Engine speed and operating mode 152
3.4.13 After starting 154
3.4.14 Sensor-controlled low idle automatic 155
3.4.15 Automatic engine stop after idling (option) 155
3.4.16 Shutting off diesel engine 156
3.4.17 Shutting off diesel engine in an emergency 157
3.4.18 Travel alarm (option) 157
3.4.19 Observe the inclination angle 168
3.4.20 Controlling working attachment 159
3.4.21 Turning and braking uppercarriage 160
3.422 Slewing brake 161
3.4.23 Positioning slewing brake 166
3.4.24 Hoist cylinder pressure warning device (option) 166
3.4.25 Lowering boom actively (option) 166
3.4.26 Retracting stick actively (option) 167
3.4.27 Selecting the working tool 167
3.4.28 Controlling special working attachment with mini-joystick 168
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 110 C Litronic – 1228 / 79878 LIEBHERR 13
Contents Operator’s manual
3.4.29 Changing over control of right mini-joystick (option) 169
3.4.30 Grapple priority (option) 170
3.4.31 AutoLift (Option) 171
3.4.32 Magnet system (option) 171
3.4.33 Reversible fan drive for radiator cleaning (option) 173
3.5 Shut-off functions 176
3.5.1 Stick cylinder shut-off (option) 176
3.5.1 Stick cylinder shut-off (option) 176
3.5.2 Hoist cylinder shut-off (option) 179
3.5.3 Height limitation 183
3.5.4 Depth limitation (option) 192
3.56.5 Overload warning system (option) 204
3.5.6 Load moment limitation (option) 206
3.6 General working methods 213
3.6.1 Working without damaging the machine 213
3.6.1 Working without damaging the machine 213
3.6.2 Putting machine in working position 214
3.6.3 Travelling at operating location 215
3.6.4 Travelling under obstacles 216
3.6.5 Handling loads 216
3.6.6 Loading transport vehicle 217
3.6.7 Lifting loads 217
3.6.8 Use of banksmen 218
3.6.9 Working in windy conditions 218
3.7 Installing and removing working attachment 220
3.7.1 Using quick coupler 220
3.7.1 Using quick coupler 220
3.7.2 Installing and removing grapple on industrial stick 220
3.7.3 Installing and removing boom 223
3.8 Parking machine 224
3.9 Transport and assembly 225
3.10 Emergency operation 226
3.10.1 Jump starting 226
3.10.2 Lowering working attachment when engine is shut off 227
3.10.3 Lowering operator’s cab in an emergency (option) 227
3.10.4 Lowering two-way adjustable cab in an emergency (option) 229
3.10.5 Towing the machine 230
3.9 Transport and assembly 225
3.10 Emergency operation 226
3.10.1 Jump starting 226
3.10.2 Lowering working attachment when engine is shut off 227
3.10.3 Lowering operator’s cab in an emergency (option) 227
3.10.4 Lowering two-way adjustable cab in an emergency (option) 229
3.10.5 Towing the machine 230
copyright © Liebherr-Hydraulikbagger GmbH 2018
14 LIEBHERR LH 110 C Litronic – 1228 /79878
14 LIEBHERR LH 110 C Litronic – 1228 /79878
LHBM2200354/01/2018-12-20/en
LHB/M2200354/01/2018-12-20/en
LHB/M2200354/01/2018-12-20/en
Operator’s manual
Contents
4 Malfunctions 231
4.1 Service code tables 231
41.1 Warning symbols 231
4.2 Fault – Cause – Remedy 238
421 Diesel engine and fuel system 238
4.22 Hydraulic system 241
423 Travel gear 242
4.2.4 Electrical system 242
4.2.5 Heating, ventilation and air conditioning unit 242
426 Working attachment 243
4.3 Problem remedy 244
4.3.1 Fuses and relays in the uppercarriage 244
4.3.2 Operator’s platform fuses and relays 250
5 Maintenance 257
5.1 Inspection and maintenance schedule 257
5.2 Filling quantities and lubrication chart 264
5.2.1 Filling quantities 264
5.2.2 Lubricating chart 266
5.3 Fuels, lubricants and operating fluids 268
5.3.1 Diesel fuels 268
53.2 Diesel exhaust fluids 268
5.3.3 Engine oils 269
5.3.4 Refrigerant 270
5.3.5 Coolant 271
5.3.6 Hydraulic oils 272
5.3.7 Gear ils 274
5.3.8 Pump distributor gear oils 275
5.3.9 Energy recuperation cylinder oils 276
5.3.10 Greases 276
5.3.11 Windscreen washer fluid 276
5.3.12 Lubricants and care products for electrical and mechanical systems 277
5.4 Access points for maintenance work 278
5.4.1 Access points on uppercarriage 278
5.4.2 Access points under the uppercarriage 279
4.1 Service code tables 231
41.1 Warning symbols 231
4.2 Fault – Cause – Remedy 238
421 Diesel engine and fuel system 238
4.22 Hydraulic system 241
423 Travel gear 242
4.2.4 Electrical system 242
4.2.5 Heating, ventilation and air conditioning unit 242
426 Working attachment 243
4.3 Problem remedy 244
4.3.1 Fuses and relays in the uppercarriage 244
4.3.2 Operator’s platform fuses and relays 250
5 Maintenance 257
5.1 Inspection and maintenance schedule 257
5.2 Filling quantities and lubrication chart 264
5.2.1 Filling quantities 264
5.2.2 Lubricating chart 266
5.3 Fuels, lubricants and operating fluids 268
5.3.1 Diesel fuels 268
53.2 Diesel exhaust fluids 268
5.3.3 Engine oils 269
5.3.4 Refrigerant 270
5.3.5 Coolant 271
5.3.6 Hydraulic oils 272
5.3.7 Gear ils 274
5.3.8 Pump distributor gear oils 275
5.3.9 Energy recuperation cylinder oils 276
5.3.10 Greases 276
5.3.11 Windscreen washer fluid 276
5.3.12 Lubricants and care products for electrical and mechanical systems 277
5.4 Access points for maintenance work 278
5.4.1 Access points on uppercarriage 278
5.4.2 Access points under the uppercarriage 279
5.4.3 Access points on the undercarriage 280
Preparing for maintenance 281
5.5.1 Preparing for maintenance 281
General maintenance 283
5.6.1 Welding 283
5.6.2 Corrosion-proofing piston rods 283
5.6.3 Cleaning the machine 284
5.6.4 Cleaning travel gear 285
5.6.5 Cleaning the fan and radiator 286
Complete machine 287
5.7.1 Checking machine for proper condition and tightness 287
5.7.2 Checking components for cracks 287
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
Preparing for maintenance 281
5.5.1 Preparing for maintenance 281
General maintenance 283
5.6.1 Welding 283
5.6.2 Corrosion-proofing piston rods 283
5.6.3 Cleaning the machine 284
5.6.4 Cleaning travel gear 285
5.6.5 Cleaning the fan and radiator 286
Complete machine 287
5.7.1 Checking machine for proper condition and tightness 287
5.7.2 Checking components for cracks 287
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 287
5.7.4 Cleaning and treating rubber seals on doors and hoods 287
5.7.5 Checking rescue system (option) 288
Drive group 289
5.8.1 Diesel engine: Bringing into maintenance position 289
5.8.2 Diesel engine: Checking oil level 289
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 290
5.8.4 Fuel pre-filter: Draining water 291
5.8.5 Fuel tank: Draining water and sediments 291
5.8.6 Air filter: Emptying dust collecting tank 293
5.8.7 Air filter: Replacing main filter cartridge 294
5.8.8 Air filter: Replacing safety filter cartridge 296
5.8.9 Air filter and air lines: Checking tightness and condition 297
5.8.10 Pump distributor gear: Checking oil level 299
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 300
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
5.7.4 Cleaning and treating rubber seals on doors and hoods 287
5.7.5 Checking rescue system (option) 288
Drive group 289
5.8.1 Diesel engine: Bringing into maintenance position 289
5.8.2 Diesel engine: Checking oil level 289
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 290
5.8.4 Fuel pre-filter: Draining water 291
5.8.5 Fuel tank: Draining water and sediments 291
5.8.6 Air filter: Emptying dust collecting tank 293
5.8.7 Air filter: Replacing main filter cartridge 294
5.8.8 Air filter: Replacing safety filter cartridge 296
5.8.9 Air filter and air lines: Checking tightness and condition 297
5.8.10 Pump distributor gear: Checking oil level 299
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 300
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 306
Cooling system 307
5.9.1 Checking coolant level 307
5.9.2 Checking cooling system and heat exchanger for contamination and
Cooling system 307
5.9.1 Checking coolant level 307
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 308
Working hydraulics 311
5.10.1 Depressurising hydraulic system 311
Working hydraulics 311
5.10.1 Depressurising hydraulic system 311
16
copyright ® Liebherr-Hydraulikbagger GmbH 2018
LIEBHERR LH 110 C Litronic – 1228 / 79878
LHBM2200354/01/2018-12-20/en
LHB/M2200354/01/2018-12-20/en
LHB/M2200354/01/2018-12-20/en
Operator’s manual Contents
5.10.2 Hydraulic tank: Checking oil level 311
5.10.3 Hydraulic tank: Draining water and sediments 314
5.10.4 Return filter: Checking and cleaning magnetic rod 316
5.10.5 Return leakage oil filter: Replacing filter cartridge 317
5.10.6 Bypass filter (option): Checking degree of contamination of filter
5.10.2 Hydraulic tank: Checking oil level 311
5.10.3 Hydraulic tank: Draining water and sediments 314
5.10.4 Return filter: Checking and cleaning magnetic rod 316
5.10.5 Return leakage oil filter: Replacing filter cartridge 317
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge 318
5.11 Electrical system 319
5.11.1 General information 319
5.12 Travel gear 320
5.12.1 Checking track tension 320
5.12.2 Tightening track 321
5.12.3 Slackening track 322
5.12.4 Determining track type 323
5.12.5 Track pads and sprocket wheels: Checking mounting 324
5.11 Electrical system 319
5.11.1 General information 319
5.12 Travel gear 320
5.12.1 Checking track tension 320
5.12.2 Tightening track 321
5.12.3 Slackening track 322
5.12.4 Determining track type 323
5.12.5 Track pads and sprocket wheels: Checking mounting 324
5.12.6 Checking tracks, sprocket wheels, idler-wheels, carrier rollers and track
rollers for wear 326
5.12.7 Visual inspection of travel gear components 326
5.13 Working attachment 327
5.13.1 Lubricating working tool 327
5.13.2 Checking pin connections for secure seating 327
5.13.3 Checking steel parts for cracks 327
5.13.4 Pin bearing: checking for wear 328
5.13.5 Energy recuperation cylinder: Performing visual inspection 328
5.14 Operator’s cab, heating and air conditioning 329
5.14.1 Filling with windscreen washer fluid 329
5.14.2 Heating: Checking function 329
5.14.3 Auxiliary heater (option): Checking function 331
5.14.4 Switching on air conditioning unit 331
5.14.5 Checking and cleaning condenser 332
5.156 Lubrication system 334
5.15.1 Checking lubrication of bearings (grease collar) 334
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 334
5.16 Slewing gearbox and slewing ring 335
5.16.1 Slewing gearbox: Checking oil level 335
rollers for wear 326
5.12.7 Visual inspection of travel gear components 326
5.13 Working attachment 327
5.13.1 Lubricating working tool 327
5.13.2 Checking pin connections for secure seating 327
5.13.3 Checking steel parts for cracks 327
5.13.4 Pin bearing: checking for wear 328
5.13.5 Energy recuperation cylinder: Performing visual inspection 328
5.14 Operator’s cab, heating and air conditioning 329
5.14.1 Filling with windscreen washer fluid 329
5.14.2 Heating: Checking function 329
5.14.3 Auxiliary heater (option): Checking function 331
5.14.4 Switching on air conditioning unit 331
5.14.5 Checking and cleaning condenser 332
5.156 Lubrication system 334
5.15.1 Checking lubrication of bearings (grease collar) 334
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 334
5.16 Slewing gearbox and slewing ring 335
5.16.1 Slewing gearbox: Checking oil level 335
Appendix
Index
IMAGES PREVIEW OF THE MANUAL:
Customer Support: [email protected]
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer
S.V
