Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Sale!
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
Original price was: $89.95.$28.95Current price is: $28.95.
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 35 M Timber Litronic
Type no.: 1473
From Serial no.: 89796
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
Language : English
Pages : 350
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 35 M Timber Litronic
Type no.: 1473
From Serial no.: 89796
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr LH 35 M Timber Litronic 1473 Machine for Industrial Operator’s Manual SN 89796 – PDF DOWNLOAD
1 Product description 19
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.1.3 Undercarriage 21
1.2 Technical data 22
1.2.1 Vibration emission 22
1.2.2 CO2 emissions of diesel engine 22
1.2.3 Sound level 23
1.2.4 Specifications 24
2 Safety warnings 25
2.1 Information on these instructions 25
21.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Intended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
22.5 Disposal 28
2.3 Description of staff 29
2.3.1 Personal protective equipment 29
2.3.2 Requirements for staff 29
2.3.3 Operating company 30
2.3.4 Operator 30
2.3.5 Maintenance staff 31
2.3.6 Electrical engineer 32
2.3.7 Refrigeration technician 32
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 35 M Timber Litronic – 1473 / 89796 LIEBHERR 9
Contents Operator’s manual
2.3.8 Slinger 33
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.1.3 Undercarriage 21
1.2 Technical data 22
1.2.1 Vibration emission 22
1.2.2 CO2 emissions of diesel engine 22
1.2.3 Sound level 23
1.2.4 Specifications 24
2 Safety warnings 25
2.1 Information on these instructions 25
21.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 Intended use 26
2.21 Laws, rules, guidelines and safety regulations 26
2.22 Intended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
22.5 Disposal 28
2.3 Description of staff 29
2.3.1 Personal protective equipment 29
2.3.2 Requirements for staff 29
2.3.3 Operating company 30
2.3.4 Operator 30
2.3.5 Maintenance staff 31
2.3.6 Electrical engineer 32
2.3.7 Refrigeration technician 32
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 35 M Timber Litronic – 1473 / 89796 LIEBHERR 9
Contents Operator’s manual
2.3.8 Slinger 33
23.9 Spotter 34
2.4 Signs on the machine 35
2.41 Warning signs 35
2.41 Warning signs 35
2.42 Information signs 39
2.4.3 Control description sticker 43
2.4.4 Identification plate 44
2.5 Protective devices on the machine 44
2.51 Safety lever or folding console 44
2.51 Safety lever or folding console 44
2.5.2 Operator’s cab 45
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Tip over protective structure (TOPS) 46
2.5.5 Roll over protective structure (ROPS) 46
2.5.6 Falling object protective structures (FOPS and FGPS) 47
2.6 Emergency equipment on the machine 47
2.6.1 Emergency exit (standard) 47
2.6.1 Emergency exit (standard) 47
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 48
2.7 Safe operation 48
2.7.1 Intoxicants 48
2.7.1 Intoxicants 48
2.7.2 Dangerous fuels and operating fluids 49
2.7.3 Transporting machine 49
2.7.4 Access to machine 50
2.7.5 Machine danger zone 51
2.7.6 Visibility 51
2.7.7 Protection against vibration 52
2.7.8 Operation of machine 53
27.9 Load-lifting work 55
2.8 Safe work 56
2.8.1 Machines with height adjustable cab 56
2.8.1 Machines with height adjustable cab 56
2.9 Safe maintenance 56
29.1 Spare parts 56
29.1 Spare parts 56
2.9.2 Heavy parts 57
2.9.3 Regular checks 57
2.10 Modifications to the machine 57
2.10.1 Modifications, add-ons and retrofittings 57
3 Control and operation 59
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 62
3.1.4 Further control units 62
3.2 Display 63
3.2.1 Display 63
3.2.2 Status symbols 64
3.2.3 Start page menu 77
3.24 Camera menu 78
3.2.5 Automatic air conditioning 79
3.2.6 Operating status menu 83
3.2.7 Diesel particulate filter submenu (option) 83
2.10.1 Modifications, add-ons and retrofittings 57
3 Control and operation 59
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 62
3.1.4 Further control units 62
3.2 Display 63
3.2.1 Display 63
3.2.2 Status symbols 64
3.2.3 Start page menu 77
3.24 Camera menu 78
3.2.5 Automatic air conditioning 79
3.2.6 Operating status menu 83
3.2.7 Diesel particulate filter submenu (option) 83
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 84
3.29 System settings menu 85
3.2.10 Operating hour meter and odometer submenu 86
3.2.11 Windscreen wiper interval submenu 86
3.2.12 Radio remote control submenu 87
3.2.13 Display settings submenu 88
3.2.14 Display brightness and display volume submenu 88
3.2.15 Camera image contrast submenu 89
3.2.16 Camera return time submenu 89
3.2.17 Regional settings and system parameters submenu 90
3.2.18 Unit selection submenu 90
3.2.19 System diagnosis submenu 91
3.2.20 Time zone submenu 91
3.2.21 Time format and date format submenu 92
3.2.22 Language selection submenu 92
3.2.23 Electrical outputs submenu 93
3.2.24 Electrical inputs submenu 94
3.2.25 Function settings menu 94
3.2.26 Central lubrication system submenu (option) 96
3.2.27 Maintenance submenu 96
3.2.28 SF submenu 98
3.2.29 Stick cylinder shut-off submenu (option) 100
3.2.30 Hoist cylinder shut-off submenu (option) 101
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 101
3.2.32 Workspace limitation submenu (option) 102
3.2.33 Automatic reversible fan drive submenu (option) 102
3.2.34 Comfort slewing brake submenu (option) 103
3.2.35 Bleeding hydraulic circuit submenu 103
3.2.36 Information menu 104
3.2.37 Operating time submenu 105
3.2.38 Fuel consumption submenu 105
3.2.39 Key assignment submenu 106
3.2.40 Tool Control menu 106
3.2.41 Service codes menu 107
submenu (option) 84
3.29 System settings menu 85
3.2.10 Operating hour meter and odometer submenu 86
3.2.11 Windscreen wiper interval submenu 86
3.2.12 Radio remote control submenu 87
3.2.13 Display settings submenu 88
3.2.14 Display brightness and display volume submenu 88
3.2.15 Camera image contrast submenu 89
3.2.16 Camera return time submenu 89
3.2.17 Regional settings and system parameters submenu 90
3.2.18 Unit selection submenu 90
3.2.19 System diagnosis submenu 91
3.2.20 Time zone submenu 91
3.2.21 Time format and date format submenu 92
3.2.22 Language selection submenu 92
3.2.23 Electrical outputs submenu 93
3.2.24 Electrical inputs submenu 94
3.2.25 Function settings menu 94
3.2.26 Central lubrication system submenu (option) 96
3.2.27 Maintenance submenu 96
3.2.28 SF submenu 98
3.2.29 Stick cylinder shut-off submenu (option) 100
3.2.30 Hoist cylinder shut-off submenu (option) 101
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 101
3.2.32 Workspace limitation submenu (option) 102
3.2.33 Automatic reversible fan drive submenu (option) 102
3.2.34 Comfort slewing brake submenu (option) 103
3.2.35 Bleeding hydraulic circuit submenu 103
3.2.36 Information menu 104
3.2.37 Operating time submenu 105
3.2.38 Fuel consumption submenu 105
3.2.39 Key assignment submenu 106
3.2.40 Tool Control menu 106
3.2.41 Service codes menu 107
3.3 Control 109
3.3.1 Battery main switch 109
3.3.1 Battery main switch 109
3.3.2 Entering and exiting machine 110
3.3.3 Step lighting (option) 11
3.3.4 Emergency exit 111
3.3.5 Fire extinguisher (option) 112
3.3.6 Folding console 112
3.3.7 Operator’s seat 114
3.3.8 Safety belt 120
3.3.9 Steering wheel 121
3.3.10 Ignition key 122
3.3.11 Confirmation button 122
3.3.12 Horn 123
3.3.13 Raising and lowering operator’s cab (option) 124
3.3.14 Windscreen 126
3.3.15 Sun blind 128
3.3.16 Viewing devices 129
3.3.17 Lighting 131
3.3.10 Ignition key 122
3.3.11 Confirmation button 122
3.3.12 Horn 123
3.3.13 Raising and lowering operator’s cab (option) 124
3.3.14 Windscreen 126
3.3.15 Sun blind 128
3.3.16 Viewing devices 129
3.3.17 Lighting 131
3.3.18 Cab lighting system 132
3.3.19 Beacon (option) 133
3.3.20 Windscreen wipers 134
3.3.21 Windscreen washer system 134
3.3.22 Auxiliary heater (option) 135
3.3.23 LiDAT (option) 135
3.4 Operation 136
3.4.1 Inspection tour before putting into service 136
34.2 Refuelling 137
3.4.3 Refuelling with electric refuelling pump (option) 137
3.4.4 Filling with diesel exhaust fluid 139
3.45 Preheating system for fuels and operating fluids (option) 140
3.4.6 Immobiliser (option) 141
3.4.7 Preparing machine for dust intensive application 143
3.4.8 Preparing machine for use in biologically sensitive areas 143
3.4.9 Operator code (option) 144
3.4.10 Starting diesel engine 145
3.4.11 Bringing machine to operating temperature 145
3.4.12 Engine speed and operating mode 146
3.4.13 After starting 147
3.4.14 Sensor-controlled low idle automatic 148
3.4.15 Automatic engine stop after idling (option) 149
3.4.16 Shutting off diesel engine 150
3.4.17 Shutting off diesel engine in an emergency 150
3.4.18 Travelling and braking 161
3.4.19 Joystick steering 153
3.4.20 Four wheel steering (option) 155
3.4.21 Steering reversal (option) 156
3.4.22 Travel alarm (option) 157
3.4.23 Trailer coupling (option) 157
3.4.24 Locking and unlocking oscillating axle 160
3.4.25 Supporting machine 162
3.4.26 Controlling working attachment 163
3.4.27 Turning and braking uppercarriage 164
3.4.28 Slewing brake 165
3.4.29 Positioning slewing brake 167
3.4.30 Selecting boom or working tool 167
3.4.31 Adjusting boom vertically 168
3.4.32 Hoist cylinder protection 169
3.4.33 Selecting the working tool 170
3.4.34 Controlling special working attachment with mini-joystick 170
3.4.35 Changing over control of right mini-joystick (option) 171
3.4.36 Grapple priority (option) 172
3.4.37 AutoLift (Option) 173
3.4.38 Reversible fan drive for radiator cleaning (option) 173
3.3.19 Beacon (option) 133
3.3.20 Windscreen wipers 134
3.3.21 Windscreen washer system 134
3.3.22 Auxiliary heater (option) 135
3.3.23 LiDAT (option) 135
3.4 Operation 136
3.4.1 Inspection tour before putting into service 136
34.2 Refuelling 137
3.4.3 Refuelling with electric refuelling pump (option) 137
3.4.4 Filling with diesel exhaust fluid 139
3.45 Preheating system for fuels and operating fluids (option) 140
3.4.6 Immobiliser (option) 141
3.4.7 Preparing machine for dust intensive application 143
3.4.8 Preparing machine for use in biologically sensitive areas 143
3.4.9 Operator code (option) 144
3.4.10 Starting diesel engine 145
3.4.11 Bringing machine to operating temperature 145
3.4.12 Engine speed and operating mode 146
3.4.13 After starting 147
3.4.14 Sensor-controlled low idle automatic 148
3.4.15 Automatic engine stop after idling (option) 149
3.4.16 Shutting off diesel engine 150
3.4.17 Shutting off diesel engine in an emergency 150
3.4.18 Travelling and braking 161
3.4.19 Joystick steering 153
3.4.20 Four wheel steering (option) 155
3.4.21 Steering reversal (option) 156
3.4.22 Travel alarm (option) 157
3.4.23 Trailer coupling (option) 157
3.4.24 Locking and unlocking oscillating axle 160
3.4.25 Supporting machine 162
3.4.26 Controlling working attachment 163
3.4.27 Turning and braking uppercarriage 164
3.4.28 Slewing brake 165
3.4.29 Positioning slewing brake 167
3.4.30 Selecting boom or working tool 167
3.4.31 Adjusting boom vertically 168
3.4.32 Hoist cylinder protection 169
3.4.33 Selecting the working tool 170
3.4.34 Controlling special working attachment with mini-joystick 170
3.4.35 Changing over control of right mini-joystick (option) 171
3.4.36 Grapple priority (option) 172
3.4.37 AutoLift (Option) 173
3.4.38 Reversible fan drive for radiator cleaning (option) 173
3.5 Shut-off functions 176
3.5.1 Stick cylinder shut-off (option) 176
3.5.1 Stick cylinder shut-off (option) 176
3.5.2 Hoist cylinder shut-off (option) 179
3.5.3 Stick cylinder shut-off for heavy working tool (option) 183
3.5.4 Bypassing stick cylinder shut-off for heavy working tool 184
3.5.5 Height limitation 186
3.5.6 Overload warning system (option) 195
3.6 General working methods 198
3.6.1 Working without damaging the machine 198
3.6.1 Working without damaging the machine 198
3.6.2 Putting machine in working position 199
3.6.3 Travelling at operating location 200
3.6.4 Travelling at operating location 201
3.6.5 Travelling with load at operating location 201
3.6.6 Travelling under obstacles 203
3.6.7 Handling loads 203
3.6.8 Loading transport vehicle 204
3.6.9 Lifting loads 204
3.6.10 Use of banksmen 205
3.6.10 Use of banksmen 205
3.7 Installing and removing working attachment 206
3.7.1 Using quick coupler 206
3.7.1 Using quick coupler 206
3.7.2 Installing and removing grapple on industrial stick 206
3.7.3 Installing and removing boom 209
3.8 Parking machine 210
3.9 Transport 211
3.9.1 Preparatory activities 211
3.9 Transport 211
3.9.1 Preparatory activities 211
3.9.2 Driving machine onto low-loader 21
3.9.3 Tying down the machine 212
3.10 Emergency operation 213
3.10.1 Jump starting 213
3.10.2 Lowering working attachment when engine is shut off 214
3.10.3 Lowering operator’s cab in an emergency (option) 214
3.10.4 Towing 215
3.10.5 Transmission 218
4 Malfunctions 221
4.1 Service code tables 221
41.1 Warning symbols 221
4.2 Fault – Cause – Remedy 228
421 Diesel engine and fuel system 228
4.22 Hydraulic system 23
4.2.3 Electrical system 232
4.2.4 Heating, ventilation and air conditioning unit 232
4.2.5 Working attachment 232
4.3 Problem remedy 234
4.3.1 Fuses and relays in the uppercarriage 234
4.3.2 Operator’s platform fuses and relays 240
5 Maintenance 247
5.1 Inspection and maintenance schedule 247
5.2 Filling quantities and lubrication chart 254
5.2.1 Filling quantities 254
5.2.2 Lubricating chart 255
5.3 Fuels, lubricants and operating fluids 257
5.3.1 Diesel fuels 257
53.2 Diesel exhaust fluids 257
5.3.3 Engine oils 258
5.3.4 Refrigerant 259
5.3.5 Coolant 260
5.3.6 Hydraulic oils 261
5.3.7 Axle oils 2635.3.8 Gear oils 264
5.3.9 Transmission oils 264
5.3.10 Pump distributor gear oils 265
5.3.11 Greases 266
5.3.12 Windscreen washer fluid 266
5.3.13 Lubricants and care products for electrical and mechanical systems 267
5.4 Access points for maintenance work 268
5.4.1 Access points on uppercarriage 268
5.4.2 Access points under the uppercarriage 269
5.5 Preparing for maintenance 271
5.5.1 Preparing for maintenance 271
5.6 General maintenance 273
5.6.1 Welding 273
5.6.2 Corrosion-proofing piston rods 273
5.6.3 Cleaning the machine 274
5.6.4 Cleaning the fan and radiator 276
5.7 Complete machine 277
5.7.1 Checking machine for proper condition and tightness 277
5.7.2 Checking components for cracks 277
3.9.3 Tying down the machine 212
3.10 Emergency operation 213
3.10.1 Jump starting 213
3.10.2 Lowering working attachment when engine is shut off 214
3.10.3 Lowering operator’s cab in an emergency (option) 214
3.10.4 Towing 215
3.10.5 Transmission 218
4 Malfunctions 221
4.1 Service code tables 221
41.1 Warning symbols 221
4.2 Fault – Cause – Remedy 228
421 Diesel engine and fuel system 228
4.22 Hydraulic system 23
4.2.3 Electrical system 232
4.2.4 Heating, ventilation and air conditioning unit 232
4.2.5 Working attachment 232
4.3 Problem remedy 234
4.3.1 Fuses and relays in the uppercarriage 234
4.3.2 Operator’s platform fuses and relays 240
5 Maintenance 247
5.1 Inspection and maintenance schedule 247
5.2 Filling quantities and lubrication chart 254
5.2.1 Filling quantities 254
5.2.2 Lubricating chart 255
5.3 Fuels, lubricants and operating fluids 257
5.3.1 Diesel fuels 257
53.2 Diesel exhaust fluids 257
5.3.3 Engine oils 258
5.3.4 Refrigerant 259
5.3.5 Coolant 260
5.3.6 Hydraulic oils 261
5.3.7 Axle oils 2635.3.8 Gear oils 264
5.3.9 Transmission oils 264
5.3.10 Pump distributor gear oils 265
5.3.11 Greases 266
5.3.12 Windscreen washer fluid 266
5.3.13 Lubricants and care products for electrical and mechanical systems 267
5.4 Access points for maintenance work 268
5.4.1 Access points on uppercarriage 268
5.4.2 Access points under the uppercarriage 269
5.5 Preparing for maintenance 271
5.5.1 Preparing for maintenance 271
5.6 General maintenance 273
5.6.1 Welding 273
5.6.2 Corrosion-proofing piston rods 273
5.6.3 Cleaning the machine 274
5.6.4 Cleaning the fan and radiator 276
5.7 Complete machine 277
5.7.1 Checking machine for proper condition and tightness 277
5.7.2 Checking components for cracks 277
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 277
5.7.4 Cleaning and treating rubber seals on doors and hoods 277
5.8 Drive group 278
5.8.1 Diesel engine: Bringing into maintenance position 278
5.8.2 Diesel engine: Checking oil level 278
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 279
5.8.4 Fuel pre-filter: Draining water 280
5.8.5 Fuel tank: Draining water and sediments 280
5.8.6 Air filter: Emptying dust collecting tank 282
5.8.7 Air filter: Replacing main filter cartridge 283
5.8.8 Air filter: Replacing safety filter cartridge 285
5.8.9 Air filter and air lines: Checking tightness and condition 286
5.8.10 Pump distributor gear: Checking oil level 288
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 289
windows 277
5.7.4 Cleaning and treating rubber seals on doors and hoods 277
5.8 Drive group 278
5.8.1 Diesel engine: Bringing into maintenance position 278
5.8.2 Diesel engine: Checking oil level 278
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 279
5.8.4 Fuel pre-filter: Draining water 280
5.8.5 Fuel tank: Draining water and sediments 280
5.8.6 Air filter: Emptying dust collecting tank 282
5.8.7 Air filter: Replacing main filter cartridge 283
5.8.8 Air filter: Replacing safety filter cartridge 285
5.8.9 Air filter and air lines: Checking tightness and condition 286
5.8.10 Pump distributor gear: Checking oil level 288
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 289
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 294
5.9 Cooling system 296
5.9.1 Checking coolant level 296
profile clamps 294
5.9 Cooling system 296
5.9.1 Checking coolant level 296
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 297
5.10 Working hydraulics 299
5.10.1 Depressurising hydraulic system 299
5.10.2 Hydraulic tank: Checking oil level 299
5.10.3 Hydraulic tank: Draining water and sediments 302
5.10.4 Return filter: Checking and cleaning magnetic rod 304
cleaning 297
5.10 Working hydraulics 299
5.10.1 Depressurising hydraulic system 299
5.10.2 Hydraulic tank: Checking oil level 299
5.10.3 Hydraulic tank: Draining water and sediments 302
5.10.4 Return filter: Checking and cleaning magnetic rod 304
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 305
5.11 Electrical system 306
5.11.1 General information 306
5.12 Axles 307
5.12.1 Lubricating axles 307
5.12.2 Tyres: Checking tyre pressure 308
5.12.3 Tyres: checking foam-filled tyres 309
5.12.4 Wheels: Checking mounting of wheel nuts 309
5.13 Working attachment 31
5.13.1 Lubricating working tool 311
5.13.2 Checking pin connections for secure seating 311
5.13.3 Checking steel parts for cracks 311
5.13.4 Pin bearing: checking for wear 312
5.14 Operator’s cab, heating and air conditioning 313
5.14.1 Filling with windscreen washer fluid 313
5.14.2 Heating: Checking function 313
5.14.3 Auxiliary heater (option): Checking function 3156
5.14.4 Switching on air conditioning unit 315
5.14.5 Checking condenser for contamination and cleaning if necessary 316
5.15 Lubrication system 318
5.15.1 Checking lubrication of bearings (grease collar) 318
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 318
5.16 Slewing gearbox and slewing ring 319
5.16.1 Slewing gearbox: Checking oil level 319
cartridge 305
5.11 Electrical system 306
5.11.1 General information 306
5.12 Axles 307
5.12.1 Lubricating axles 307
5.12.2 Tyres: Checking tyre pressure 308
5.12.3 Tyres: checking foam-filled tyres 309
5.12.4 Wheels: Checking mounting of wheel nuts 309
5.13 Working attachment 31
5.13.1 Lubricating working tool 311
5.13.2 Checking pin connections for secure seating 311
5.13.3 Checking steel parts for cracks 311
5.13.4 Pin bearing: checking for wear 312
5.14 Operator’s cab, heating and air conditioning 313
5.14.1 Filling with windscreen washer fluid 313
5.14.2 Heating: Checking function 313
5.14.3 Auxiliary heater (option): Checking function 3156
5.14.4 Switching on air conditioning unit 315
5.14.5 Checking condenser for contamination and cleaning if necessary 316
5.15 Lubrication system 318
5.15.1 Checking lubrication of bearings (grease collar) 318
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 318
5.16 Slewing gearbox and slewing ring 319
5.16.1 Slewing gearbox: Checking oil level 319
IMAGES PREVIEW OF THE MANUAL:
Need help? Contact: [email protected]
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V
