Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
$28.95
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
Language : English
Pages : 360
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 35 M Timber Litronic
Type no.: 1473 (USA / CAN)
From Serial no.: 89796
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Machine for Industrial Applications Operator’s Manual SN 89796 – PDF DOWNLOAD
1 Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.1.3 Undercarriage 19
1.2 Technical data 20
1.2.1 Vibration emission 20
1.2.2 CO2 emissions of diesel engine 20
1.2.3 Sound level 21
1.2.4 Specifications 22
1.3 Warranty conditions 23
1.3.1 Additional information, USA 23
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 23
1.3.3 Warranty coverage from manufacturer 23
1.3.4 Warranty obligations of the owner 24
1.3.5 Warranty 24
1.3.6 Warranty parts 24
1.3.7 Exclusions 25
2 Safety warnings 27
2.1 Information on these instructions 27
2.1.1 Representation of warning messages 27
2.1.2 Graphic symbols in these instructions 27
2.2 Intended use 28
2.21 Laws, rules, guidelines and safety regulations 28
2.2.2 Intended use 28
2.2.3 Foreseeable misuse 29
2.2.4 Operating conditions 29
225 Disposal 30
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.1.3 Undercarriage 19
1.2 Technical data 20
1.2.1 Vibration emission 20
1.2.2 CO2 emissions of diesel engine 20
1.2.3 Sound level 21
1.2.4 Specifications 22
1.3 Warranty conditions 23
1.3.1 Additional information, USA 23
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 23
1.3.3 Warranty coverage from manufacturer 23
1.3.4 Warranty obligations of the owner 24
1.3.5 Warranty 24
1.3.6 Warranty parts 24
1.3.7 Exclusions 25
2 Safety warnings 27
2.1 Information on these instructions 27
2.1.1 Representation of warning messages 27
2.1.2 Graphic symbols in these instructions 27
2.2 Intended use 28
2.21 Laws, rules, guidelines and safety regulations 28
2.2.2 Intended use 28
2.2.3 Foreseeable misuse 29
2.2.4 Operating conditions 29
225 Disposal 30
Description of staff 31
2.3.1 Personal protective equipment 31
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 34
2.3.8 Slinger 35
2.3.9 Spotter 36
Signs on the machine 37
2.41 Warning signs 37
2.4.2 Safety signs (USA) 11
2.4.3 Information signs 44
2.44 Control description sticker 48
2.4.5 Identification tag (USA) 49
Protective devices on the machine 49
2.51 Safety lever or folding console 49
2.5.2 Operator’s cab 49
2.5.3 Height-adjustable operator’s cab 50
2.5.4 Tip over protective structure (TOPS) 50
2.5.5 Roll over protective structure (ROPS) 51
2.5.6 Falling object protective structures (FOPS and FGPS) 51
Emergency equipment on the machine 52
2.6.1 Emergency exit (standard) 52
2.6.2 Fire extinguisher (option) 52
2.6.3 Emergency command devices of machine 52
2.6.4 Emergency stop function of machine 53
Safe operation 53
2.7.1 Intoxicants 53
2.7.2 Dangerous fuels and operating fluids 53
2.7.3 Transporting machine 54
27.4 Access to machine 54
2.7.5 Machine danger zone 55
2.7.6 Visibility 55
2.3.1 Personal protective equipment 31
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 34
2.3.8 Slinger 35
2.3.9 Spotter 36
Signs on the machine 37
2.41 Warning signs 37
2.4.2 Safety signs (USA) 11
2.4.3 Information signs 44
2.44 Control description sticker 48
2.4.5 Identification tag (USA) 49
Protective devices on the machine 49
2.51 Safety lever or folding console 49
2.5.2 Operator’s cab 49
2.5.3 Height-adjustable operator’s cab 50
2.5.4 Tip over protective structure (TOPS) 50
2.5.5 Roll over protective structure (ROPS) 51
2.5.6 Falling object protective structures (FOPS and FGPS) 51
Emergency equipment on the machine 52
2.6.1 Emergency exit (standard) 52
2.6.2 Fire extinguisher (option) 52
2.6.3 Emergency command devices of machine 52
2.6.4 Emergency stop function of machine 53
Safe operation 53
2.7.1 Intoxicants 53
2.7.2 Dangerous fuels and operating fluids 53
2.7.3 Transporting machine 54
27.4 Access to machine 54
2.7.5 Machine danger zone 55
2.7.6 Visibility 55
copyright ® Liebherr-Hydraulikbagger GmbH 2018
LH 35 M Timber Litronic – 1473
(USA/CAN) / 89796
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
Operator’s manual
Contents
2.7.7 Protection against vibration 56
2.7.8 Operation of machine 57
2.7.9 Load-lifting work 60
2.8 Safe work 60
2.8.1 Machines with height adjustable cab 60
2.9 Safe maintenance 61
2.9.1 Spare parts 61
2.9.2 Heavy parts 61
2.9.3 Regular checks 61
2.10 Madifications to the machine 62
2.10.1 Modifications, add-ons and retrofittings 62
3 Control and operation 63
3.1 Control and operating elements 63
3.1.1 Overview of operator’s platform 63
3.1.2 Control unit A 65
3.1.3 Control unit B 66
3.1.4 Further control units 66
3.2 Display 67
3.2.1 Display 67
3.2.2 Status symbols 68
3.2.3 Start page menu 81
3.24 Camera menu 82
3.2.5 Automatic air conditioning 83
3.2.6 Operating status menu 87
3.2.7 Diesel particulate filter submenu (option) 87
2.7.8 Operation of machine 57
2.7.9 Load-lifting work 60
2.8 Safe work 60
2.8.1 Machines with height adjustable cab 60
2.9 Safe maintenance 61
2.9.1 Spare parts 61
2.9.2 Heavy parts 61
2.9.3 Regular checks 61
2.10 Madifications to the machine 62
2.10.1 Modifications, add-ons and retrofittings 62
3 Control and operation 63
3.1 Control and operating elements 63
3.1.1 Overview of operator’s platform 63
3.1.2 Control unit A 65
3.1.3 Control unit B 66
3.1.4 Further control units 66
3.2 Display 67
3.2.1 Display 67
3.2.2 Status symbols 68
3.2.3 Start page menu 81
3.24 Camera menu 82
3.2.5 Automatic air conditioning 83
3.2.6 Operating status menu 87
3.2.7 Diesel particulate filter submenu (option) 87
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 88
3.2.9 System settings menu 89
3.2.10 Operating hour meter and odometer submenu 90
3.2.11 Windscreen wiper interval submenu 90
3.2.12 Radio remote control submenu Co)
3.2.13 Display settings submenu 92
3.2.14 Display brightness and display volume submenu 92
3.2.15 Camera image contrast submenu 93
submenu (option) 88
3.2.9 System settings menu 89
3.2.10 Operating hour meter and odometer submenu 90
3.2.11 Windscreen wiper interval submenu 90
3.2.12 Radio remote control submenu Co)
3.2.13 Display settings submenu 92
3.2.14 Display brightness and display volume submenu 92
3.2.15 Camera image contrast submenu 93
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 35 M Timber Litronic – 1473 pyr LIEBHERR 9
(USA / CAN) / 89796
Contents
Contents
Operator’s manual
3.3
3.2.16 Camera return time submenu 93
3.2.17 Regional settings and system parameters submenu 94
3.2.18 Unit selection submenu 94
3.2.19 System diagnosis submenu 95
3.2.20 Time zone submenu 95
3.2.21 Time format and date format submenu 96
3.2.22 Language selection submenu 96
3.2.23 Electrical outputs submenu 97
3.2.24 Electrical inputs submenu 98
3.2.25 Function settings menu 98
3.2.26 Central lubrication system submenu (option) 100
3.2.27 Maintenance submenu 100
3.2.28 SF submenu 102
3.2.29 Stick cylinder shut-off submenu (option) 104
3.2.30 Hoist cylinder shut-off submenu (option) 105
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 105
3.2.32 Workspace limitation submenu (option) 106
3.2.33 Automatic reversible fan drive submenu (option) 106
3.2.34 Comfort slewing brake submenu (option) 107
3.2.35 Bleeding hydraulic circuit submenu 107
3.2.36 Information menu 108
3.2.37 Operating time submenu 109
3.2.38 Fuel consumption submenu 109
3.2.39 Key assignment submenu 110
3.2.40 Tool Control menu 110
3.2.41 Service codes menu 11
Control 113
3.3.1 Battery main switch 113
3.3.2 Entering and exiting machine 114
3.3.3 Step lighting (option) 115
3.3.4 Emergency exit 116
3.3.5 Fire extinguisher (option) 116
3.3.6 Folding console 116
3.3.7 Operator’s seat 118
3.3.8 Safety belt 124
3.2.17 Regional settings and system parameters submenu 94
3.2.18 Unit selection submenu 94
3.2.19 System diagnosis submenu 95
3.2.20 Time zone submenu 95
3.2.21 Time format and date format submenu 96
3.2.22 Language selection submenu 96
3.2.23 Electrical outputs submenu 97
3.2.24 Electrical inputs submenu 98
3.2.25 Function settings menu 98
3.2.26 Central lubrication system submenu (option) 100
3.2.27 Maintenance submenu 100
3.2.28 SF submenu 102
3.2.29 Stick cylinder shut-off submenu (option) 104
3.2.30 Hoist cylinder shut-off submenu (option) 105
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 105
3.2.32 Workspace limitation submenu (option) 106
3.2.33 Automatic reversible fan drive submenu (option) 106
3.2.34 Comfort slewing brake submenu (option) 107
3.2.35 Bleeding hydraulic circuit submenu 107
3.2.36 Information menu 108
3.2.37 Operating time submenu 109
3.2.38 Fuel consumption submenu 109
3.2.39 Key assignment submenu 110
3.2.40 Tool Control menu 110
3.2.41 Service codes menu 11
Control 113
3.3.1 Battery main switch 113
3.3.2 Entering and exiting machine 114
3.3.3 Step lighting (option) 115
3.3.4 Emergency exit 116
3.3.5 Fire extinguisher (option) 116
3.3.6 Folding console 116
3.3.7 Operator’s seat 118
3.3.8 Safety belt 124
10
copyright ® Liebherr-Hydraulikbagger GmbH 2018
LH 35 M Timber Litronic – 1473
(USA/CAN) / 89796
(USA/CAN) / 89796
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
Operator’s manual
Contents
3.3.9 Steering wheel 125
3.3.10 Ignition key 126
3.3.11 Confirmation button 126
3.3.12 Horn 127
3.3.13 Raising and lowering operator’s cab (option) 128
3.3.14 Windscreen 130
3.3.15 Sun blind 132
3.3.16 Viewing devices 133
3.3.17 Lighting 135
3.3.18 Cab lighting system 136
3.3.19 Beacon (option) 137
3.3.20 Windscreen wipers 138
3.3.21 Windscreen washer system 138
3.3.22 Auxiliary heater (option) 139
3.3.23 LiDAT (option) 139
3.4 Operation 140
3.4.1 Inspection tour before putting into service 140
3.42 Refuelling 141
3.4.3 Refuelling with electric refuelling pump (option) 141
3.4.4 Filling with diesel exhaust fluid 143
3.4.5 Preheating system for fuels and operating fluids (option) 144
3.46 Immobiliser (option) 145
3.4.7 Preparing machine for dust intensive application 147
3.4.8 Preparing machine for use in biologically sensitive areas 147
3.4.9 Starting diesel engine 148
3.4.10 Bringing machine to operating temperature 148
3.4.11 Engine speed and operating mode 149
3.4.12 After starting 150
3.4.13 Sensor-controlled low idle automatic 151
3.4.14 Automatic engine stop after idling (option) 162
3.4.15 Shutting off diesel engine 153
3.4.16 Shutting off diesel engine in an emergency 153
3.4.17 Travelling and braking 154
3.4.18 Joystick steering 156
3.4.19 Four wheel steering (option) 158
LH 35 M Timber Litronic – 1473 Pe pao wa 2010
3.3.10 Ignition key 126
3.3.11 Confirmation button 126
3.3.12 Horn 127
3.3.13 Raising and lowering operator’s cab (option) 128
3.3.14 Windscreen 130
3.3.15 Sun blind 132
3.3.16 Viewing devices 133
3.3.17 Lighting 135
3.3.18 Cab lighting system 136
3.3.19 Beacon (option) 137
3.3.20 Windscreen wipers 138
3.3.21 Windscreen washer system 138
3.3.22 Auxiliary heater (option) 139
3.3.23 LiDAT (option) 139
3.4 Operation 140
3.4.1 Inspection tour before putting into service 140
3.42 Refuelling 141
3.4.3 Refuelling with electric refuelling pump (option) 141
3.4.4 Filling with diesel exhaust fluid 143
3.4.5 Preheating system for fuels and operating fluids (option) 144
3.46 Immobiliser (option) 145
3.4.7 Preparing machine for dust intensive application 147
3.4.8 Preparing machine for use in biologically sensitive areas 147
3.4.9 Starting diesel engine 148
3.4.10 Bringing machine to operating temperature 148
3.4.11 Engine speed and operating mode 149
3.4.12 After starting 150
3.4.13 Sensor-controlled low idle automatic 151
3.4.14 Automatic engine stop after idling (option) 162
3.4.15 Shutting off diesel engine 153
3.4.16 Shutting off diesel engine in an emergency 153
3.4.17 Travelling and braking 154
3.4.18 Joystick steering 156
3.4.19 Four wheel steering (option) 158
LH 35 M Timber Litronic – 1473 Pe pao wa 2010
LIEBHERR 1
(USA / CAN) / 89796
Contents Operator’s manual
3.4.20 Steering reversal (option) 159
3.4.21 Travel alarm (option) 160
3.4.22 Trailer coupling (option) 160
3.4.23 Locking and unlocking oscillating axle 163
3.4.24 Supporting machine 165
3.4.25 Controlling working attachment 166
3.4.26 Turning and braking uppercarriage 167
3.4.27 Slewing brake 168
3.4.28 Positioning slewing brake 170
3.4.29 Selecting boom or working tool 170
3.4.30 Adjusting boom vertically 171
3.4.31 Hoist cylinder protection 172
3.4.32 Selecting the working tool 173
3.4.33 Controlling special working attachment with mini-joystick 173
3.4.34 Changing over control of right mini-joystick (option) 174
3.4.35 Grapple priority (option) 175
3.4.36 AutoLift (Option) 176
3.4.37 Reversible fan drive for radiator cleaning (option) 176
Contents Operator’s manual
3.4.20 Steering reversal (option) 159
3.4.21 Travel alarm (option) 160
3.4.22 Trailer coupling (option) 160
3.4.23 Locking and unlocking oscillating axle 163
3.4.24 Supporting machine 165
3.4.25 Controlling working attachment 166
3.4.26 Turning and braking uppercarriage 167
3.4.27 Slewing brake 168
3.4.28 Positioning slewing brake 170
3.4.29 Selecting boom or working tool 170
3.4.30 Adjusting boom vertically 171
3.4.31 Hoist cylinder protection 172
3.4.32 Selecting the working tool 173
3.4.33 Controlling special working attachment with mini-joystick 173
3.4.34 Changing over control of right mini-joystick (option) 174
3.4.35 Grapple priority (option) 175
3.4.36 AutoLift (Option) 176
3.4.37 Reversible fan drive for radiator cleaning (option) 176
3.5 Shut-off functions 179
3.5.1 Stick cylinder shut-off (option) 179
3.5.1 Stick cylinder shut-off (option) 179
3.5.2 Hoist cylinder shut-off (option) 182
3.56.3 Stick cylinder shut-off for heavy working tool (option) 186
3.5.4 Bypassing stick cylinder shut-off for heavy working tool 187
3.5.5 Height limitation 189
3.5.6 Overload warning system (option) 198
3.6 General working methods 201
3.6.1 Working without damaging the machine 201
3.6.1 Working without damaging the machine 201
3.6.2 Putting machine in working position 202
3.6.3 Travelling at operating location 203
3.6.4 Travelling at operating location 204
3.6.5 Travelling with load at operating location 204
3.6.6 Travelling under obstacles 206
3.6.7 Handling loads 206
3.6.8 Loading transport vehicle 207
3.6.9 Lifting loads 207
12 ERHERR ssw Trea
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
Operator’s manual
Contents
3.6.10 Use of banksmen 208
3.7 Installing and removing working attachment 216
3.7.1 Using quick coupler 216
3.7.2 Installing and removing grapple on industrial stick 216
3.7.3 Installing and removing boom 219
3.8 Parking machine 220
3.9 Transport 221
3.9.1 Preparatory activities 221
3.9.2 Driving machine onto low-loader 221
3.9.3 Tying down the machine 222
3.10 Emergency operation 223
3.10.1 Jump starting 223
3.10.2 Lowering working attachment when engine is shut off 224
3.10.3 Lowering operator’s cab in an emergency (option) 224
3.10.4 Towing 225
3.10.5 Transmission 228
4 Malfunctions 231
4.1 Service code tables 231
41.1 Warning symbols 231
4.2 Fault – Cause – Remedy 238
421 Diesel engine and fuel system 238
4.2.2 Hydraulic system 241
4.2.3 Electrical system 242
4.24 Heating, ventilation and air conditioning unit 242
4.2.5 Working attachment 242
4.3 Problem remedy 244
4.3.1 Fuses and relays in the uppercarriage 244
4.3.2 Operator’s platform fuses and relays 250
5 Maintenance 257
5.1 Inspection and maintenance schedule 257
5.2 Filling quantities and lubrication chart 264
5.2.1 Filling quantities 264
5.2.2 Lubricating chart 265
3.7 Installing and removing working attachment 216
3.7.1 Using quick coupler 216
3.7.2 Installing and removing grapple on industrial stick 216
3.7.3 Installing and removing boom 219
3.8 Parking machine 220
3.9 Transport 221
3.9.1 Preparatory activities 221
3.9.2 Driving machine onto low-loader 221
3.9.3 Tying down the machine 222
3.10 Emergency operation 223
3.10.1 Jump starting 223
3.10.2 Lowering working attachment when engine is shut off 224
3.10.3 Lowering operator’s cab in an emergency (option) 224
3.10.4 Towing 225
3.10.5 Transmission 228
4 Malfunctions 231
4.1 Service code tables 231
41.1 Warning symbols 231
4.2 Fault – Cause – Remedy 238
421 Diesel engine and fuel system 238
4.2.2 Hydraulic system 241
4.2.3 Electrical system 242
4.24 Heating, ventilation and air conditioning unit 242
4.2.5 Working attachment 242
4.3 Problem remedy 244
4.3.1 Fuses and relays in the uppercarriage 244
4.3.2 Operator’s platform fuses and relays 250
5 Maintenance 257
5.1 Inspection and maintenance schedule 257
5.2 Filling quantities and lubrication chart 264
5.2.1 Filling quantities 264
5.2.2 Lubricating chart 265
LH 35 M Timber Litronic – 1473 Pe pao wa 2010
LIEBHERR 13
LIEBHERR 13
(USA / CAN) / 89796
Contents Operator’s manual
5.3 Fuels, lubricants and operating fluids 267
5.3.1 Diesel fuels 267
5.3.2 Diesel exhaust fluids 267
5.3.3 Engine oils 268
5.3.4 Refrigerant 269
53.5 Coolant 270
5.3.6 Hydraulic oils 271
5.3.7 Axle oils 273
5.3.8 Gear oils 274
5.3.9 Transmission oils 274
5.3.10 Pump distributor gear oils 275
5.3.11 Greases 276
5.3.12 Windscreen washer fluid 276
5.3.13 Lubricants and care products for electrical and mechanical systems 277
5.4 Access points for maintenance work 278
5.4.1 Access points on uppercarriage 278
5.4.2 Access points under the uppercarriage 279
5.5 Preparing for maintenance 281
5.5.1 Preparing for maintenance 281
56 General maintenance 283
56.1 Welding 283
5.6.2 Corrosion-proofing piston rods 283
5.6.3 Cleaning the machine 284
5.6.4 Cleaning the fan and radiator 286
5.7 Complete machine 287
5.7.1 Checking machine for proper condition and tightness 287
5.7.2 Checking components for cracks 287
Contents Operator’s manual
5.3 Fuels, lubricants and operating fluids 267
5.3.1 Diesel fuels 267
5.3.2 Diesel exhaust fluids 267
5.3.3 Engine oils 268
5.3.4 Refrigerant 269
53.5 Coolant 270
5.3.6 Hydraulic oils 271
5.3.7 Axle oils 273
5.3.8 Gear oils 274
5.3.9 Transmission oils 274
5.3.10 Pump distributor gear oils 275
5.3.11 Greases 276
5.3.12 Windscreen washer fluid 276
5.3.13 Lubricants and care products for electrical and mechanical systems 277
5.4 Access points for maintenance work 278
5.4.1 Access points on uppercarriage 278
5.4.2 Access points under the uppercarriage 279
5.5 Preparing for maintenance 281
5.5.1 Preparing for maintenance 281
56 General maintenance 283
56.1 Welding 283
5.6.2 Corrosion-proofing piston rods 283
5.6.3 Cleaning the machine 284
5.6.4 Cleaning the fan and radiator 286
5.7 Complete machine 287
5.7.1 Checking machine for proper condition and tightness 287
5.7.2 Checking components for cracks 287
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 287
5.7.4 Cleaning and treating rubber seals on doors and hoods 287
5.8 Drive group 288
5.8.1 Diesel engine: Bringing into maintenance position 288
5.8.2 Diesel engine: Checking oil level 288
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 289
5.8.4 Fuel pre-filter: Draining water 290
1a “EBHERR ssw Trea
windows 287
5.7.4 Cleaning and treating rubber seals on doors and hoods 287
5.8 Drive group 288
5.8.1 Diesel engine: Bringing into maintenance position 288
5.8.2 Diesel engine: Checking oil level 288
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 289
5.8.4 Fuel pre-filter: Draining water 290
1a “EBHERR ssw Trea
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
LHBM2221170/01/2018-12-17/en
Operator’s manual Contents
5.8.5 Fuel tank: Draining water and sediments 290
5.8.6 Air filter: Emptying dust collecting tank 292
5.8.7 Air filter: Replacing main filter cartridge 293
5.8.8 Air filter: Replacing safety filter cartridge 295
5.8.9 Air filter and air lines: Checking tightness and condition 296
5.8.10 Pump distributor gear: Checking oil level 298
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 299
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 304
5.9 Cooling system 306
5.9.1 Checking coolant level 306
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 307
5.10 Working hydraulics 309
5.10.1 Depressurising hydraulic system 309
5.10.2 Hydraulic tank: Checking oil level 309
5.10.3 Hydraulic tank: Draining water and sediments 312
5.10.4 Return filter: Checking and cleaning magnetic rod 314
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 316
5.11 Electrical system 316
5.11.1 General information 316
5.12 Axles 317
5.12.1 Lubricating axles 317
5.12.2 Tyres: Checking tyre pressure 318
5.12.3 Tyres: checking foam-filled tyres 319
5.12.4 Wheels: Checking mounting of wheel nuts 319
5.13 Working attachment 321
5.13.1 Lubricating working tool 321
5.13.2 Checking pin connections for secure seating 321
5.13.3 Checking steel parts for cracks 321
5.13.4 Pin bearing: checking for wear 322
5.14 Operator’s cab, heating and air conditioning 323
5.14.1 Filling with windscreen washer fluid 323
5.14.2 Heating: Checking function 323
5.14.3 Auxiliary heater (option): Checking function 325
LH 35 M Timber Litronic – 1473 Em
(USA / CAN) / 89796 LIEBHERR 15
Contents Operator’s manual
5.8.5 Fuel tank: Draining water and sediments 290
5.8.6 Air filter: Emptying dust collecting tank 292
5.8.7 Air filter: Replacing main filter cartridge 293
5.8.8 Air filter: Replacing safety filter cartridge 295
5.8.9 Air filter and air lines: Checking tightness and condition 296
5.8.10 Pump distributor gear: Checking oil level 298
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 299
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 304
5.9 Cooling system 306
5.9.1 Checking coolant level 306
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 307
5.10 Working hydraulics 309
5.10.1 Depressurising hydraulic system 309
5.10.2 Hydraulic tank: Checking oil level 309
5.10.3 Hydraulic tank: Draining water and sediments 312
5.10.4 Return filter: Checking and cleaning magnetic rod 314
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 316
5.11 Electrical system 316
5.11.1 General information 316
5.12 Axles 317
5.12.1 Lubricating axles 317
5.12.2 Tyres: Checking tyre pressure 318
5.12.3 Tyres: checking foam-filled tyres 319
5.12.4 Wheels: Checking mounting of wheel nuts 319
5.13 Working attachment 321
5.13.1 Lubricating working tool 321
5.13.2 Checking pin connections for secure seating 321
5.13.3 Checking steel parts for cracks 321
5.13.4 Pin bearing: checking for wear 322
5.14 Operator’s cab, heating and air conditioning 323
5.14.1 Filling with windscreen washer fluid 323
5.14.2 Heating: Checking function 323
5.14.3 Auxiliary heater (option): Checking function 325
LH 35 M Timber Litronic – 1473 Em
(USA / CAN) / 89796 LIEBHERR 15
Contents Operator’s manual
5.14.4 Switching on air conditioning unit 325
5.14.5 Checking condenser for contamination and cleaning if necessary 326
5.15 Lubrication system 328
5.15.1 Checking lubrication of bearings (grease collar) 328
5.14.5 Checking condenser for contamination and cleaning if necessary 326
5.15 Lubrication system 328
5.15.1 Checking lubrication of bearings (grease collar) 328
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 328
5.16 Slewing gearbox and slewing ring 329
5.16.1 Slewing gearbox: Checking oil level 329
5.16.1 Slewing gearbox: Checking oil level 329
6 Appendix 331
Index 333
Index 333
Customer Support: [email protected]
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V
