Liebherr LH 35 M Timber Litronic 1473 (USA CAN) Material Handling Machine Operator’s Manual 89796 – PDF DOWNLOAD

Description

Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Material Handling Machine Operator’s Manual 89796 – PDF DOWNLOAD

FILE DETAILS:

Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Material Handling Machine Operator’s Manual 89796 – PDF DOWNLOAD

Language : English
Pages : 386
Downloadable : Yes
File Type : PDF
Size: 82.4 MB

DESCRIPTION:

Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Material Handling Machine Operator’s Manual 89796 – PDF DOWNLOAD

Product ID
Manufacturer : Liebherr-Hydraulikbagger GmbH
Type : LH 35 M Timber Litronic
Type no. : 1473 (USA/ CAN)
From Serial no. : 89796

Preface:

• This operator’s manual is intended for you as operator or maintenance staff. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid malfunctions caused by incorrect operation.
• Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
• Read the operator’s manual before putting into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.

Examples of this work:

The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.

• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet.
• If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine (operator’s manual, maintenance manual, spare parts catalogue, … ) is available from MyLiebherr for the entire service life of a machine.

TABLE OF CONTENTS:

Liebherr LH 35 M Timber Litronic 1473 (USA / CAN) Material Handling Machine Operator’s Manual 89796 – PDF DOWNLOAD

1 Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.1.3 Undercarriage 19
1.2 Technical data 20
1.2.1 Vibration emission 20
1.2.2 CO2 emissions of diesel engine 20
1.2.3 Sound level 22
1.2.4 Specifications 23
1.3 Warranty conditions 24
1.3.1 Additional information, USA 24
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 24
1.3.3 Warranty coverage from manufacturer
1.3.4 Warranty obligations of the owner
1.3.5 Warranty
1.3.6 Warranty parts
1.3.7 Exclusions
2 Safety warnings
2.1.1 Representation of warning messages
2.1.2 Graphic symbols in these instructions
Intended use
2.2.1 Laws, rules, guidelines and safety regulations
2.2.2 Intended use
2.2.3 Foreseeable misuse
2.2.4 Operating conditions
2.2.5 Disposal
2.3 Description of staff 31
2.3.1 Personal protective equipment 31
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 35
2.3.8 Slinger 35
2.3.9 Spotter 36
2.4 Signs on the machine 37
2.4.1 Safety signs (USA) 37
2.4.2 Information signs 40
2.4.3 Identification tag (USA) 44
2.5 Protective devices on the machine 44
2.5.1 Safety lever or folding console 44
2.5.2 Operator’s cab 44
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Tip over protective structure (TOPS) 45
2.5.5 Roll over protective structure (ROPS) 46
2.5.6 Falling object protective structures (FOPS and FGPS) 46
2.6 Emergency equipment on the machine 47
2.6.1 Emergency exit (standard) 47
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 48
2.7 Safe operation 48
2.7.1 Intoxicants 48
2.7.2 Dangerous fuels and operating fluids 48
2.7.3 Transporting machine 49
2.7.4 Access to machine 49
2.7.5 Machine danger zone 50
2.7.6 Visibility 50
2.7.7 Protection against vibration 51
2.7.8 Operation of machine 52
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 35 M Timber Litronic -1473
8 llEBHERR (USA / CAN) / 89796
Operator’s manual
2.7.9 Load-lifting work
2.8 Safe work
2.8.1 Machines with height adjustable cab
2.9 Safe maintenance
2.9.1 Spare parts
2.9.2 Heavy parts
2.9.3 Regular checks
2.10 Modifications to the machine
2.10.1 Modifications, add-ons and retrofittings
3 Control and operation
3.1.1 Overview of operator’s platform
3.1.2 Control unit A
3.1.3 Control unit B
3.1.4 Further control units
3.1.5 Symbols on control description sticker
Display
3.2.1 Display
3.2.2 Status symbols
3.2.3 Start page menu
3.2.4 Camera menu
3.2.5 Automatic air conditioning
3.2.6 Operating status menu
3.2.7 Diesel particulate filter submenu (option)
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option)
3.2.9 System settings menu
3.2.10 Operating hour meter and odometer submenu
3.2.11 Windscreen wiper interval submenu
3.2.12 Radio remote control submenu
3.2.13 Display settings submenu
3.2.14 Display brightness and display volume submenu
3.2.15 Camera image contrast submenu
3.2.16 Camera return time submenu
3.2.17 Regional settings and system parameters submenu 98
3.2.18 Unit selection submenu 99
3.2.19 System diagnosis submenu 99
3.2.20 Time zone submenu 100
3.2.21 Time format and date format submenu 100
3.2.22 Language selection submenu 101
3.2.23 Electrical outputs submenu 101
3.2.24 Electrical inputs submenu 102
3.2.25 Function settings menu 103
3.2.26 Central lubrication system submenu (option) 104
3.2.27 Maintenance submenu 105
3.2.28 SF submenu 106
3.2.29 User profile submenu 109
3.2.30 Stick cylinder shut-off submenu (option) 109
3.2.31 Hoist cylinder shut-off submenu (option) 110
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 111
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 111
3.2.34 Workspace limitation submenu (option) 112
3.2.35 Automatic reversible fan drive submenu (option) 113
3.2.36 Comfort slewing brake submenu (option) 113
3.2.37 Bleeding hydraulic circuit submenu 114
3.2.38 Information menu 114
3.2.39 Operating time submenu 115
3.2.40 Fuel consumption submenu 116
3.2.41 Key assignment submenu 117
3.2.42 Tool Control menu 117
3.2.43 Service codes menu 118
3.3 Control 120
3.3.1 Battery main switch 120
3.3.2 Entering and exiting machine 121
3.3.3 Step lighting (option) 122
3.3.4 Emergency exit 122
3.3.5 Fire extinguisher (option) 123
3.3.6 Folding console 123
3.3.7 Operator’s seat 125
3.3.8 Safety belt 132
3.3.9 Steering wheel 134
3.3.10 Ignition key 134
3.3.11 Confirmation button 135
3.3.12 Horn 136
3.3.13 Raising and lowering operator’s cab (option) 137
3.3.14 Windscreen 139
3.3.15 Sun blind 141
3.3.16 Viewing devices 142
3.3.17 Lighting 144
3.3.18 Cab lighting system 145
3.3.19 Beacon (option) 146
3.3.20 Windscreen wipers 147
3.3.21 Windscreen washer system 147
3.3.22 Auxiliary heater (option) 148
3.3.23 LiDAT (option) 148
3.4 Operation 149
3.4.1 Inspection tour before putting into service 149
3.4.2 Refuelling 150
3.4.3 Refuelling with electric refuelling pump (option) 150
3.4.4 Filling with diesel exhaust fluid 152
3.4.5 Preheating system for fuels and operating fluids (option) 153
3.4.6 Immobiliser (option) 155
3.4.7 Preparing machine for dust intensive application 156
3.4.8 Preparing machine for use in biologically sensitive areas 157
3.4.9 Operator code (option) 157
3.4.10 Starting diesel engine 158
3.4.11 Bringing machine to operating temperature 159
3.4.12 Engine speed and operating mode 159
3.4.13 After starting 161
3.4.14 Sensor-controlled low idle automatic 162
3.4.15 Automatic engine stop after idling (option) 162
3.4.16 Shutting off diesel engine 163
3.4.17 Shutting off diesel engine in an emergency 163
3.4.18 Travelling and braking 164
LH 35 M Timber Litronic – 1473
3.4.19 Joystick steering 167
3.4.20 Four wheel steering (option) 168
3.4.21 Steering reversal (option) 169
3.4.22 Travel alarm (option) 171
3.4.23 Trailer coupling (option) 171
3.4.24 Locking and unlocking oscillating axle 174
3.4.25 Supporting machine 175
3.4.26 Controlling working attachment 177
3.4.27 Turning and braking uppercarriage 178
3.4.28 Slewing brake 179
3.4.29 Positioning slewing brake 180
3.4.30 Selecting boom or working tool 181
3.4.31 Adjusting boom vertically 182
3.4.32 Hoist cylinder protection 183
3.4.33 Selecting the working tool 184
3.4.34 Controlling special working attachment with mini-joystick 184
3.4.35 Changing over control of right mini-joystick (option) 185
3.4.36 Grapple priority (option) 186
3.4.37 Autolift (Option) 187
3.4.38 Reversible fan drive for radiator cleaning (option) 187
Shut-off functions 190
3.5.1 Stick cylinder shut-off (option) 190
3.5.2 Hoist cylinder shut-off (option) 193
3.5.3 Stick cylinder shut-off for heavy working tool (option) 197
3.5.4 Bypassing stick cylinder shut-off for heavy working tool 198
3.5.5 Height limitation
3.5.6 Overload warning system (option)
3.5.7 Load moment limitation (option)
General working methods
3.6.1 Working without damaging the machine
3.6.2 Putting machine in working position
3.6.3 Travelling at operating location
3.6.4 Travelling with load at operating location
3.6.5 Travelling under obstacles
3.6.6 Handling loads
3.6.7 Loading transport vehicle
3.6.8 Lifting loads
3.6.9 Use of banksmen
3.7 Installing and removing working attachment
3.7.1 Using quick coupler
3.7.2 Installing and removing grapple on industrial stick
3.7.3 Installing and removing boom
3.8 Parking machine
3.9 Transport
3.9.1 Preparatory work
3.9.2 Driving machine onto low-loader
3.9.3 Tying down machine
3.9.4 After transport
3.10 Emergency operation
3.10.1 Jump starting
3.10.2 Lowering working attachment when engine is shut off
3.10.3 Lowering operator’s cab in an emergency (option)
3.10.4 Towing
3.10.5 Transmission
4 Malfunctions
4.1 Service code tables
4.1.1 Warning symbols
4.2 Fault – Cause – Remedy
4.2.1 Diesel engine and fuel system
4.2.2 Hydraulic system
4.2.3 Electrical system
4.2.4 Heating, ventilation and air conditioning unit
4.2.5 Working attachment
4.3 Problem remedy
4.3.1 Fuses and relays in the uppercarriage
4.3.2 Operator’s platform fuses and relays
5 Maintenance
Inspection and maintenance schedule
Filling quantities and lubrication chart 281
5.2.1 Filling quantities 281
5.2.2 Lubrication chart 282
Fuels, lubricants and operating fluids 286
5.3.1 General information about lubricants and fuels 286
5.3.2 Diesel fuels 286
5.3.3 Diesel exhaust fluids 287
5.3.4 Engine oils 288
5.3.5 Refrigerant 289
5.3.6 Coolant 290
5.3.7 Hydraulic oils 291
5.3.8 Axle oils 293
5.3.9 Gear oils 294
5.3.10 Transmission oils 294
5.3.11 Pump distributor gear oils 295
5.3.12 Greases 296
5.3.13 Windscreen washer fluid 296
5.3.14 Lubricants and care products for electrical and mechanical systems 297
Access points for maintenance work 298
5.4.1 Access points on uppercarriage 298
5.4.2 Access points under the uppercarriage 300
Preparing for maintenance 301
5.5.1 Maintenance procedures 301
5.5.2 Preparing for maintenance 302
5.5.3 Putting machine in maintenance position 304
General maintenance 305
5.6.1 Welding 305
5.6.2 Corrosion-proofing piston rods 305
5.6.3 Cleaning the machine 306
5.6.4 Cleaning fan and radiator 308
Complete machine 309
5.7.1 Checking machine for proper condition and tightness 309
5.7.2 Lubricating bearings on machine and working attachment 313
5.7.3 Checking components for cracks
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 316
5.7.5 Filling in sample data sheet 317
Drive group 323
5.8.1 Diesel engine: Bringing into maintenance position 323
5.8.2 Diesel engine: Checking oil level 323
5.8.3 Fuel pre-filter: Draining water 324
5.8.4 Fuel tank: Draining water and sediments 325
5.8.5 Air filter: Emptying dust collecting tank 327
5.8.6 Air filter: Replacing main filter cartridge 328
5.8.7 Air filter: Replacing safety filter cartridge 330
5.8.8 Pump distributor gear: Checking oil level 331
5.8.9 Diesel particulate filter: Activating and deactivating regeneration 332
Cooling system 339
5.9.1 Checking coolant level 339
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 340
Working hydraulics 342
5.10.1 Depressurising hydraulic system 342
5.10.2 Hydraulic tank: Checking oil level 342
5.10.3 Hydraulic tank: Draining water and sediments 345
5.10.4 Return filter: Checking and cleaning magnetic rod 347
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 348
Electrical system 349
5.11.1 General information 349
Axles 350
5.12.1 Screw plug tightening torques 350
5.12.2 Lubricating axles 350
5.12.3 Tyres: Checking tyre pressure 352
5.12.4 Tyres: checking foam-filled tyres 353
5.12.5 Wheels: Checking mounting of wheel nuts 353
Working attachment 355
5.13.1 Lubricating working tool 355
5.13.2 Checking pin bearings for wear 355
Operator’s cab, heating and air conditioning 356
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
Operator’s manual
5.14.5 Checking condenser for contamination and cleaning if necessary
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
Appendix
Index

IMAGES PREVIEW OF THE MANUAL:

Customer Support: [email protected]

https://vimeo.com/824462247?share=copy

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V