Liebherr LH 35 M Timber Litronic Operator’s manual – PDF DOWNLOAD

Description

Liebherr LH 35 M Timber Litronic Operator’s manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr LH 35 M Timber Litronic Operator’s manual – PDF DOWNLOAD

Language : English
Pages :378
Downloadable : Yes
File Type : PDF
Size: 1.39 MB

DESCRIPTION:

Liebherr LH 35 M Timber Litronic Operator’s manual – PDF DOWNLOAD

Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 35 M Timber Litronic
Type no : 1473 (USA/ CAN)
From Serial NO:89796

Preface

• This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.
• Examples of this work include:

• The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.
• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Liebherr LH 35 M Timber Litronic Operator’s manual – PDF DOWNLOAD

1 Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.1.2 Uppercarriage 18
1.1.3 Undercarriage 19
1.2 Technical data 20
1.2.1 Vibration emission 20
1.2.2 CO2 emissions of diesel engine 20
1.2.3 Sound level 22
1.2.4 Specifications 23
1.3 Warranty conditions 24
1.3.1 Additional information, USA 24
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 24
1.3.3 Warranty coverage from manufacturer
1.3.4 Warranty obligations of the owner
1.3.5 Warranty
1.3.6 Warranty parts
1.3.7 Exclusions
2 Safety warnings
Contents Operator’s manual
2.3 Description of staff 31
2.3.1 Personal protective equipment 31
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 35
2.3.8 Slinger 35
2.3.9 Spotter 36
2.4 Signs on the machine 37
2.4.1 Safety signs (USA) 37
2.4.2 lnformation signs 40
2.4.3 ldentification tag (USA) 44
2.5 Protective devices on the machine 44
2.5.1 Safety lever or folding console 44
2.5.2 Operator’s cab 45
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Tip over protective structure (TOPS) 46
2.5.5 Roll over protective structure (ROPS) 46
2.5.6 Falling object protective structures (FOPS and FGPS) 47
2.6 Emergency equipment on the machine 47
2.6.1 Emergency exit (standard) 47
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 48
2.7 Safe operation 48
2.7.1 lntoxicants 48
2.7.6 Visibility 51 …J
2.7.7 Protection against vibration 52
2.7.8 Operation of machine 53
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 35 M Timber Litronic -147
2.7.9 Load-lifting work
2.8 Safework
2.8.1 Machines with height adjustable cab
2.9 Safe maintenance
2.9.1 Spare parts
2.9.2 Heavy parts
2.9.3 Regular checks
2.10 Modifications to the machine
2.10.1 Modifications, add-ons and retrofittings
3 Control and operation
LH 35 M Timber Litronic – 1473
(USA / CAN) / 89796
Control and operating elements
3.1.1 Overview of operator’s platform
3.1.2 Control unit A
3.1.3 Control unit B
3.1.4 Further control units
3.1.5 Symbols on control description sticker
Display
3.2.1 Display
3.2.2 Status symbols
3.2.3 Start page menu
3.2.4 Camera menu
3.2.5 Air conditioning
3.2.6 Operating status menu
3.2.7 Diesel particulate filter submenu (option)
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option)
3.2.9 System settings menu
3.2.10 Operating hour meter and odometer submenu
3.2.11 Windscreen wiper interval submenu
3.2.12 Radio remete control submenu
3.2.13 Display settings submenu
3.2.14 Display brightness and display volume submenu
3.2.15 Camera image contrast submenu
3.2.16 Camera return time submenu
Contents Operator’s manual
3.2.17 Regional settings and system parameters submenu 97
3.2.18 Unit selection submenu 97
3.2.19 System diagnosis submenu 98
3.2.20 Time zone submenu 98
3.2.21 Time format and date format submenu 99
3.2.22 Language selection submenu 99
3.2.23 Electrical outputs submenu 100
3.2.24 Electrical inputs submenu 101
3.2.25 Function settings menu 101
3.2.26 Central lubrication system submenu (option) 103
3.2.27 Maintenance submenu 103
3.2.28 SF submenu 105
3.2.29 User profile submenu 107
3.2.30 Stick cylinder shut-off submenu (option) 108
3.2.31 Hoist cylinder shut-off submenu (option) 108
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 109
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 110
3.2.34 Workspace limitation submenu (option) 110
3.2.35 Automatic reversible fan drive submenu (option) 111
3.2.36 Comfort slewing brake submenu (option) 112
3.2.37 Bleeding hydraulic circuit submenu 112
3.2.38 lnformation menu 113
3.2.39 Operating time submenu 114
3.2.40 Fuel consumption submenu 114
3.2.41 Key assignment submenu 115
3.2.42 Tool Contrai menu 115
3.2.43 Service codes menu 116
3.3 Contrai 118
3.3.5 Fire extinguisher (option) 121 …J
3.3.6 Folding console 121
3.3.7 Operator’s seat 123
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 35 M Timber Litronic -1473 10 llEBHERR (USA / CAN) / 89796
Operator’s manual Contents
3.3.8 Safety belt 130
3.3.9 Steering wheel 132
3.3.10 lgnition key 132
3.3.11 Confirmation button 133
3.3.12 Horn 134
3.3.13 Raising and lowering operator’s cab (option) 135
3.3.14 Windscreen 137
3.3.15 Sun blind 139
3.3.16 Viewing devices 140
3.3.17 Lighting 142
3.3.18 Cab lighting system 143
3.3.19 Beacon (option) 144
3.3.20 Windscreen wipers 145
3.3.21 Windscreen washer system 145
3.3.22 Auxiliary heater (option) 146
3.3.23 LiDAT (option) 146
3.4 Operation 147
3.4.1 lnspection tour before putting into service 147
3.4.2 Refuelling 148
3.4.3 Refuelling with electric refuelling pump (option) 148
3.4.4 Filling with diesel exhaust fluid 150
3.4.5 Preheating system for fuels and operating fluids (option) 151
3.4.6 lmmobiliser (option) 153
3.4.7 Preparing machine for dust intensiva application 154
3.4.8 Preparing machine for use in biologically sensitive areas 155
3.4.9 Operator code (option) 155
3.4.10 Starting diesel engine 156
3.4.11 Bringing machine to operating temperature 157
3.4.17 Shutting off diesel engine in an emergency 161
3.4.18 Travelling and braking 162
LH 35 M Timber Litronic – 1473
copyright© Liebherr-Hydraulikbagger GmbH 2020
(USA / CAN) / 89796 llEBHERR 11
Contents Operator’s manual
3.4.19 Automatic service brake (option) 165
3.4.20 Joystick steering 166
3.4.21 Four wheel steering (option) 168
3.4.22 Steering reversai (option) 169
3.4.23 Travei alarm (option) 170
3.4.24 Trailer coupling (option) 170
3.4.25 Locking and unlocking oscillating axle 173
3.4.26 Supporting machine 174
3.4.27 Controlling working attachment 176
3.4.28 Turning and braking uppercarriage 177
3.4.29 Slewing brake 178
3.4.30 Positioning slewing brake 179
3.4.31 Selecting boom or working tool 180
3.4.32 Adjusting boom vertically 181
3.4.33 Hoist cylinder protection 182
3.4.34 Selecting the working tool 183
3.4.35 Controlling special working attachment with mini-joystick 183
3.4.36 Changing over contrai of right mini-joystick (option) 184
3.4.37 Grapple priority (option) 185
3.4.38 Autolift (Option) 186
3.4.39 Reversible fan drive for radiator cleaning (option) 186
3.5 Shut-off functions 189
3.5.1 Stick cylinder shut-off (option) 189
3.5.2 Hoist cylinder shut-off (option) 192
3.5.3 Stick cylinder shut-off for heavy working tool (option) 196
3.5.4 Bypassing stick cylinder shut-off for heavy working tool 197
3.5.5 Height limitation 199
3.5.6 Overload warning system (option) 208
3.5.7 Load moment limitation (option) 211 ~’
3.6 General working methods o 217 “o ‘
3.6.1 Working without damaging the machine !2 217 .o.. .
3.6.2 Putting machine in working position 218 “”°”’ 1ii
3.6.3 Travelling at operating location 219 …J
3.6.4 Travelling with load at operating location 220
3.6.5 Travelling under obstacles 221
Operator’s manual
3.6.6 Handling loads
3.6.7 Loading transport vehicle
3.6.8 Lifting loads
3.6.9 Use of banksmen
3.7 lnstalling and removing working attachment
3.7.1 Using quick coupler
3.7.2 lnstalling and removing grapple on industrial stick
3.7.3 lnstalling and removing boom
3.8 Parking machine
3.9 Transport
3.9.1 Preparatory work
3.9.2 Driving machine onto low-loader
3.9.3 Tying down machine
3.9.4 After transport
3.10 Emergency operation
3.10.1 Jump starting
3.10.2 Lowering working attachment when engine is shut off
3.10.3 Lowering operator’s cab in an emergency (option)
3.10.4 Towing
3.10.5 Transmission
4.1.1 Warning symbols
Fault – Cause – Remedy
4.2.1 Diesel engine and fuel system
4.2.2 Hydraulic system
4.2.3 Electrical system
4.2.4 Heating, ventilation and air conditioning unit
4.2.5 Working attachment
Problem remedy
4.3.1 Fuses and relays in the uppercarriage
4.3.2 Operator’s platform fuses and relays
5 Maintenance 273
5.1 lnspection and maintenance schedule 273
5.2 Filling quantities and lubrication chart 279
5.2.1 Filling quantities 279
5.2.2 Lubrication chart 280
5.3 Fuels, lubricants and operating fluids 284
5.3.1 General information about lubricants and fuels 284
5.3.2 Diesel fuels 284
5.3.3 Diesel exhaust fluids 285
5.3.4 Engine oils 286
5.3.5 Refrigerant 287
5.3.6 Coolant 288
5.3.7 Hydraulic oils 289
5.3.8 Axle oils 291
5.3.9 Gearoils 292
5.3.10 Transmission oils 292
5.3.11 Pump distributor gear oils 293
5.3.12 Greases 294
5.3.13 Windscreen washer fluid 295
5.3.14 Lubricants and care products for electrical and mechanical systems 295
5.4 Access points for maintenance work 296
5.4.1 Access points on uppercarriage 296
5.4.2 Access points under the uppercarriage 298
5.5 Preparing for maintenance 299
5.5.1 Maintenance procedures 299
5.5.2 Preparing for maintenance 300
5.5.3 Putting machine in maintenance position 302
5.7.1 Checking machine for proper condition and tightness 307
5.7.2 Lubricating bearings on machine and working attachment 311
copyright© Liebherr-Hydraulikbagger GmbH 2020
5.7.3 Checking components for cracks 313
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 314
Drive group 315
5.8.1 Diesel engine: Bringing into maintenance position 315
5.8.2 Diesel engine: Checking oil level 315
5.8.3 Fuel pre-filter: Draining water 316
5.8.4 Fuel tank: Draining water and sediments 317
5.8.5 Air filter: Emptying dust collecting tank 319
5.8.6 Air filter: Replacing main filter cartridge 320
5.8.7 Air filter: Replacing safety filter cartridge 322
5.8.8 Pump distributor gear: Checking oil level 323
5.8.9 Diesel particulate filter: Activating and deactivating regeneration 324
Cooling system 331
5.9.1 Checking coolant level 331
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 332
Working hydraulics 334
5.10.1 Depressurising hydraulic system 334
5.10.2 Hydraulic tank: Checking oil level 334
5.10.3 Hydraulic tank: Draining water and sediments 337
5.10.4 Return filter: Checking and cleaning magnetic rod 339
5.10.5 Bypass filter (option): Checking degree of contamination of filter
cartridge 340
Electrical system 341
5.11.1 General information 341
Axles 342
5.12.1 Screw plug tightening torques 342
5.12.2 Lubricating axles 342
5.12.3 Tyres: Checking tyre pressure 344
5.12.4 Tyres: checking foam-filled tyres 345
5.12.5 Wheels: Checking mounting of wheel nuts 345
Working attachment 347
5.13.1 Lubricating working tool 347
5.13.2 Checking pin bearings for wear 347
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
Operator’s manual
5.14.5 Checking condenser for contamination and cleaning if necessary
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
Appendix
lndex

 Questions? Email us: [email protected]

https://vimeo.com/824339273?share=copy

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M