Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
$28.95
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
Language : English
Pages : 326
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
IMAGES PREVIEW OF THE MANUAL:
TABLE OF CONTENTS:
Liebherr LH 60 C HR Litronic (USA / CAN) 1212 Machine for Industrial Applications Operator’s Manual SN 64724 – PDF DOWNLOAD
1 Product description 17
1.1 Technical description 18
1.1.1 General overview 18
1.1.2 Uppercarriage 19
1.1.3 Undercarriage 20
1.1.4 Energy recuperation cylinder (option) 21
1.2 Technical data 22
1.2.1 Vibration emission 22
1.2.2 Sound emissions 23
1.2.3 Specifications 23
1.3 Warranty conditions 24
1.3.1 Additional information, USA 24
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 24
1.3.3 Warranty coverage from manufacturer 24
1.3.4 Warranty obligations of the owner 25
1.3.5 Warranty 25
1.3.6 Warranty parts 25
1.3.7 Exclusions 26
2 Safety warnings, signs 27
2.1 Safety advices and symbols 27
2.1.1 Designation of safety advices 27
2.1.2 Other designations 28
2.2 Additional rules and guidelines 28
2.3 Designated use 28
2.4 Signs on the machine 29
2.4.1 Warning signs 29
2.42 Information signs 33
2.4.3 Control description sticker 39
copyright ® Liebherr-Hydraulikbagger GmbH 2015
LH 60 C HR-1212 Litronic (USA / CAN) / 64724 LIEBHERR 9
Contents
1.1 Technical description 18
1.1.1 General overview 18
1.1.2 Uppercarriage 19
1.1.3 Undercarriage 20
1.1.4 Energy recuperation cylinder (option) 21
1.2 Technical data 22
1.2.1 Vibration emission 22
1.2.2 Sound emissions 23
1.2.3 Specifications 23
1.3 Warranty conditions 24
1.3.1 Additional information, USA 24
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 24
1.3.3 Warranty coverage from manufacturer 24
1.3.4 Warranty obligations of the owner 25
1.3.5 Warranty 25
1.3.6 Warranty parts 25
1.3.7 Exclusions 26
2 Safety warnings, signs 27
2.1 Safety advices and symbols 27
2.1.1 Designation of safety advices 27
2.1.2 Other designations 28
2.2 Additional rules and guidelines 28
2.3 Designated use 28
2.4 Signs on the machine 29
2.4.1 Warning signs 29
2.42 Information signs 33
2.4.3 Control description sticker 39
copyright ® Liebherr-Hydraulikbagger GmbH 2015
LH 60 C HR-1212 Litronic (USA / CAN) / 64724 LIEBHERR 9
Contents
Operator’s manual
2.44 Identification tag 39
2,5 Safety wamings 40
2.5.1 General safety instructions 40
2.5.2 Avoid crushing and burning injuries 41
2.5.3 Avoid fire and explosions 41
2.54 Seeing and being seen 42
2.5.5 Protection against vibration 43
2.5.6 Before taking into operation 44
2.57 Getting in and out 44
2.5.8 Starting the machine 45
2.59 Working 45
2.5.10 Additional information for machines with turret 47
2.5.11 Shutting down the machine 48
2.5.12 Transporting the machine 48
2.513 Towing 49
2.5.14 Maintenance and repair 49
2.5.15 Modifications, add-ons and conversions 53
2,516 Removal and installation of the attachment pins 53
2.5.17 Falling object protective structures (FOPS and FGPS) 53
2.5.18 Checking machine for cracks 54
2.5.19 Regular checks 54
3 Control and operation 55
3.1 Control and operating elements 55
3.1.1 Overview of operator’s platform 55
3.1.2 Control unit A 57
3.1.3 Control unit B 58
3.1.4 Control units C,D and E 58
3.2 Control 59
3.2.1 Battery main switch 59
3.2.2 Getting in and getting out 59
3.2.3 Emergency exit 62
2,5 Safety wamings 40
2.5.1 General safety instructions 40
2.5.2 Avoid crushing and burning injuries 41
2.5.3 Avoid fire and explosions 41
2.54 Seeing and being seen 42
2.5.5 Protection against vibration 43
2.5.6 Before taking into operation 44
2.57 Getting in and out 44
2.5.8 Starting the machine 45
2.59 Working 45
2.5.10 Additional information for machines with turret 47
2.5.11 Shutting down the machine 48
2.5.12 Transporting the machine 48
2.513 Towing 49
2.5.14 Maintenance and repair 49
2.5.15 Modifications, add-ons and conversions 53
2,516 Removal and installation of the attachment pins 53
2.5.17 Falling object protective structures (FOPS and FGPS) 53
2.5.18 Checking machine for cracks 54
2.5.19 Regular checks 54
3 Control and operation 55
3.1 Control and operating elements 55
3.1.1 Overview of operator’s platform 55
3.1.2 Control unit A 57
3.1.3 Control unit B 58
3.1.4 Control units C,D and E 58
3.2 Control 59
3.2.1 Battery main switch 59
3.2.2 Getting in and getting out 59
3.2.3 Emergency exit 62
3.24 Emergency exit — two-way adjustable operator’s cab LHC D-730
(option) 64
3.2.5 Fire extinguisher (option) 65
3.2.6 Safety lever 65
3.2.7 Operator’s seat 66
3.2.8 Safety belt 72
3.2.9 Ignition key 73
3.2.10 Horn 73
3.2.11 Adjusting operator’s cab — two-way adjusting (option) 74
3.2.12 Sun blind 77
3.2.13 Lighting 78
3.2.14 Cab lighting system 79
3.2.15 Beacon (option) 80
3.2.16 Windshield wipers 81
3.2.17 Windscreen washer system 81
3.2.18 Display 82
3.2.19 Status symbols 83
3.2.20 Main menu 96
3.2.21 Camera system menu 97
3.2.22 Automatic heating and automatic ventilation 98
3.2.23 Automatic air conditioning 101
3.2.24 Operating status menu 106
3.2.25 General settings menu 105
3.2.26 Machine-specific settings menu 112
3.2.27 Information menu 119
3.2.28 Tool Control menu 122
3.2.29 Messages menu 122
3.2.30 Auxiliary heater (option) 123
3.2.31 Drink holder 124
3.2.32 Radio system 124
3.2.33 LiDAT (option) 127
(option) 64
3.2.5 Fire extinguisher (option) 65
3.2.6 Safety lever 65
3.2.7 Operator’s seat 66
3.2.8 Safety belt 72
3.2.9 Ignition key 73
3.2.10 Horn 73
3.2.11 Adjusting operator’s cab — two-way adjusting (option) 74
3.2.12 Sun blind 77
3.2.13 Lighting 78
3.2.14 Cab lighting system 79
3.2.15 Beacon (option) 80
3.2.16 Windshield wipers 81
3.2.17 Windscreen washer system 81
3.2.18 Display 82
3.2.19 Status symbols 83
3.2.20 Main menu 96
3.2.21 Camera system menu 97
3.2.22 Automatic heating and automatic ventilation 98
3.2.23 Automatic air conditioning 101
3.2.24 Operating status menu 106
3.2.25 General settings menu 105
3.2.26 Machine-specific settings menu 112
3.2.27 Information menu 119
3.2.28 Tool Control menu 122
3.2.29 Messages menu 122
3.2.30 Auxiliary heater (option) 123
3.2.31 Drink holder 124
3.2.32 Radio system 124
3.2.33 LiDAT (option) 127
3.3 Operation 128
3.3.1 Inspection tour before putting into service 128
3.3.2 Refuelling 129
3.3.3 Fuelling with electric refuelling pump (option) 129
3.3.4 Preheating system (option) 131
3.3.56 Immobiliser (option) 133
3.3.6 Preparing machine for dust intensive application 134
3.3.7 Preparing machine for use in biologically sensitive areas 135
3.3.8 Starting diesel engine 135
3.3.9 Bringing machine to operating temperature 136
3.3.10 Engine speed and operating mode 136
3.3.11 After starting 138
3.3.12 Sensor-controlled low idle automatic 140
3.3.13 Automatic engine shut-off after idling (option) 140
3.3.14 Shutting off the diesel engine 141
3.3.15 Travelling 142
3.3.16 Braking 146
3.3.17 Travel alarm (option) 146
3.3.18 Observe the inclination angle 147
3.3.19 Controlling working attachment 148
3.3.20 Turing and braking uppercarriage 149
3.3.21 Overload warning system (option) 151
3.3.22 Hoist cylinder pressure warming device (option) 152
3.3.23 Lowering boom actively (option) 153
3.3.24 Lowering stick actively (option) 153
3.3.25 Selecting the working tool 154
3.3.26 Operating the working tool or working attachment with buttons 154
3.3.27 Operating the working tool or working attachment with the mini joystick 156
3.3.28 Right mini-joystick control changeover (option) 157
3.3.29 Grapple circuit (option) 169
3.3.30 AutolLift (option) 159
3.3.31 Magnet system (option) 160
3.3.32 Reversing fan drive for radiator cleaning (option) 161
Shut-down and limitation devices 163
3.4.1 Stick cylinder shut-off (option) 163
3.42 Height limitation 168
General working methods 183
3.5.1 Safety belt 183
3.5.2 Drugs and alcohol 183
3.5.3 Working without damaging the machine 183
3.5.4 Preparatory work 185
3.5.5 Working position 185
3.3.8 Starting diesel engine 135
3.3.9 Bringing machine to operating temperature 136
3.3.10 Engine speed and operating mode 136
3.3.11 After starting 138
3.3.12 Sensor-controlled low idle automatic 140
3.3.13 Automatic engine shut-off after idling (option) 140
3.3.14 Shutting off the diesel engine 141
3.3.15 Travelling 142
3.3.16 Braking 146
3.3.17 Travel alarm (option) 146
3.3.18 Observe the inclination angle 147
3.3.19 Controlling working attachment 148
3.3.20 Turing and braking uppercarriage 149
3.3.21 Overload warning system (option) 151
3.3.22 Hoist cylinder pressure warming device (option) 152
3.3.23 Lowering boom actively (option) 153
3.3.24 Lowering stick actively (option) 153
3.3.25 Selecting the working tool 154
3.3.26 Operating the working tool or working attachment with buttons 154
3.3.27 Operating the working tool or working attachment with the mini joystick 156
3.3.28 Right mini-joystick control changeover (option) 157
3.3.29 Grapple circuit (option) 169
3.3.30 AutolLift (option) 159
3.3.31 Magnet system (option) 160
3.3.32 Reversing fan drive for radiator cleaning (option) 161
Shut-down and limitation devices 163
3.4.1 Stick cylinder shut-off (option) 163
3.42 Height limitation 168
General working methods 183
3.5.1 Safety belt 183
3.5.2 Drugs and alcohol 183
3.5.3 Working without damaging the machine 183
3.5.4 Preparatory work 185
3.5.5 Working position 185
12
copyright ® Liebherr-Hydraulikbagger GmbH 2015
LH 60 C HR-1212 Litronic (USA / CAN) / 64724
LHBM04768691/01/2015-12-16/en
LHB/10476691/01/2015-12-16/en
LHB/10476691/01/2015-12-16/en
Operator’s manual
Contents
3.5.6 Working with the grapple 186
3.5.7 Transferring loads 186
3.5.8 Loading a transport vehicle 187
3.5.9 Lifting loads 187
3.5.10 Identifying potential dangers and eliminate them. 188
3.5.11 Use of banksmen 188
3.6 Installation and removal of attachment parts 196
3.6.1 Using quick coupler 196
3.6.2 Installing and removing grapple on industrial stick 196
3.7 Parking the machine 199
3.8 Transport and assembly 200
3.9 Emergency operation 2M
3.9.1 Using emergency mode 201
3.9.2 Jump starting 203
3.9.3 Lowering working attachment when engine is shut off 203
3.5.7 Transferring loads 186
3.5.8 Loading a transport vehicle 187
3.5.9 Lifting loads 187
3.5.10 Identifying potential dangers and eliminate them. 188
3.5.11 Use of banksmen 188
3.6 Installation and removal of attachment parts 196
3.6.1 Using quick coupler 196
3.6.2 Installing and removing grapple on industrial stick 196
3.7 Parking the machine 199
3.8 Transport and assembly 200
3.9 Emergency operation 2M
3.9.1 Using emergency mode 201
3.9.2 Jump starting 203
3.9.3 Lowering working attachment when engine is shut off 203
3.9.4 Lowering the operator’s cab in an emergency — one-way adjusting
(option) 204
(option) 204
3.9.5 Lowering the operator’s cab in an emergency — two and three-way
adjustment (option) 206
4 Malfunctions 209
4.1 Service code tables 210
41.1 Warning symbols 210
4.2 Fault – Cause – Remedy 216
4.21 Diesel engine and fuel system 216
4.2.2 Hydraulic system 219
42.3 Travel gear 220
4.2.4 Electrical system 220
4.25 Heating, ventilation and air conditioning unit 220
4.26 Working attachment 221
4.3 Problem remedy 222
4.3.1 Uppercarriage fuses and relays 222
4.3.2 Operator’s platform fuses and relays 229
5 Maintenance 235
5.1 Inspection and maintenance schedule 235
adjustment (option) 206
4 Malfunctions 209
4.1 Service code tables 210
41.1 Warning symbols 210
4.2 Fault – Cause – Remedy 216
4.21 Diesel engine and fuel system 216
4.2.2 Hydraulic system 219
42.3 Travel gear 220
4.2.4 Electrical system 220
4.25 Heating, ventilation and air conditioning unit 220
4.26 Working attachment 221
4.3 Problem remedy 222
4.3.1 Uppercarriage fuses and relays 222
4.3.2 Operator’s platform fuses and relays 229
5 Maintenance 235
5.1 Inspection and maintenance schedule 235
Filling quantities and lubrication chart 242
5.2.1 Filling quantities 242
5.2.2 Lubricating chart 243
Fuels, lubricants and operating fluids 245
5.3.1 Diesel fuels 245
5.3.2 Engine oils 245
5.3.3 Coolant 246
5.3.4 Hydraulic oils 247
5.3.5 Gear oils 248
5.3.6 Pump distributor gear oils 249
5.3.7 Energy recuperation cylinder oils 250
5.3.8 Greases 250
5.3.9 Windscreen washer fluid 251
5.3.10 Lubricants and care products for electrical and mechanical systems 251
Access points for maintenance work 252
5.4.1 Access points on uppercarriage 252
5.4.2 Access points under the uppercarriage 253
5.4.3 Access points on the undercarriage 254
Preparing for maintenance 255
5.5.1 Maintenance procedures 255
5.5.2 Safety procedures 255
General maintenance 256
56.1 Welding 256
5.6.3 Corrosion-proofing piston rods 256
5.6.4 Cleaning the machine 257
5.6.5 Cleaning travel gear 259
5.6.6 Cleaning the fan and radiator 259
Complete machine 260
5.7.1 Checking machine for proper condition and tightness 260
5.7.2 Lubricating bearings on machine and working attachment 260
5.7.3 Checking components for cracks 262
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 262
5.7.5 Cleaning and treating rubber seals on doors and hoods 262
5.7.6 Inspecting rescue system 262
5.2.1 Filling quantities 242
5.2.2 Lubricating chart 243
Fuels, lubricants and operating fluids 245
5.3.1 Diesel fuels 245
5.3.2 Engine oils 245
5.3.3 Coolant 246
5.3.4 Hydraulic oils 247
5.3.5 Gear oils 248
5.3.6 Pump distributor gear oils 249
5.3.7 Energy recuperation cylinder oils 250
5.3.8 Greases 250
5.3.9 Windscreen washer fluid 251
5.3.10 Lubricants and care products for electrical and mechanical systems 251
Access points for maintenance work 252
5.4.1 Access points on uppercarriage 252
5.4.2 Access points under the uppercarriage 253
5.4.3 Access points on the undercarriage 254
Preparing for maintenance 255
5.5.1 Maintenance procedures 255
5.5.2 Safety procedures 255
General maintenance 256
56.1 Welding 256
5.6.3 Corrosion-proofing piston rods 256
5.6.4 Cleaning the machine 257
5.6.5 Cleaning travel gear 259
5.6.6 Cleaning the fan and radiator 259
Complete machine 260
5.7.1 Checking machine for proper condition and tightness 260
5.7.2 Lubricating bearings on machine and working attachment 260
5.7.3 Checking components for cracks 262
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 262
5.7.5 Cleaning and treating rubber seals on doors and hoods 262
5.7.6 Inspecting rescue system 262
14
copyright ® Liebherr-Hydraulikbagger GmbH 2015
LIEBHERR LH 60 C HR-1212 Litronic (USA / CAN) / 64724
LHBM04768691/01/2015-12-16/en
LHB/10476691/01/2015-12-16/en
LHB/10476691/01/2015-12-16/en
Operator’s manual
Contents
5.8 Drive group 264
5.8.1 Diesel engine: Bringing into maintenance position 264
5.8.2 Diesel engine: Checking oil level 264
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 265
5.8.4 Fuel pre-filter: Draining water 265
5.8.56 Air filter: Emptying dust collecting tank 267
5.8.6 Air filter: Replacing main filter cartridge 268
5.8.7 Air filter: Replacing safety filter cartridge 270
5.8.8 Air filter and air lines: Checking tightness and condition 271
5.8.9 Diesel particulate filter (option): Starting and blocking regeneration 273
5.9 Cooling system 279
5.9.1 Checking coolant level 279
5.9.2 Checking cooling system and heat exchanger for contamination and
5.8.1 Diesel engine: Bringing into maintenance position 264
5.8.2 Diesel engine: Checking oil level 264
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 265
5.8.4 Fuel pre-filter: Draining water 265
5.8.56 Air filter: Emptying dust collecting tank 267
5.8.6 Air filter: Replacing main filter cartridge 268
5.8.7 Air filter: Replacing safety filter cartridge 270
5.8.8 Air filter and air lines: Checking tightness and condition 271
5.8.9 Diesel particulate filter (option): Starting and blocking regeneration 273
5.9 Cooling system 279
5.9.1 Checking coolant level 279
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 280
5.10 Working hydraulics system 282
5.10.1 Depressurising hydraulic system 282
5.10.2 Hydraulic tank: Checking oil level 282
5.10.3 Return filter: Checking and cleaning magnetic rod 285
5.10 Working hydraulics system 282
5.10.1 Depressurising hydraulic system 282
5.10.2 Hydraulic tank: Checking oil level 282
5.10.3 Return filter: Checking and cleaning magnetic rod 285
5.10.4 Bypass filter (option): checking the degree of contamination of the filter
cartridge 286
5.11 Electrical system 287
5.11.1 General information 287
5.11.2 Checking warning lights and displays when putting into service 288
5.12 Travel gear 289
5.12.1 Checking track tension 289
5.12.2 Tightening track 290
5.12.3 Slackening track 291
5.12.4 Track pads and sprocket wheels: Checking mounting 292
cartridge 286
5.11 Electrical system 287
5.11.1 General information 287
5.11.2 Checking warning lights and displays when putting into service 288
5.12 Travel gear 289
5.12.1 Checking track tension 289
5.12.2 Tightening track 290
5.12.3 Slackening track 291
5.12.4 Track pads and sprocket wheels: Checking mounting 292
5.12.5 Checking the chains, sprockets, idlers, support rollers and track rollers
for wear 294
5.12.6 Checking tyre pressure 294
5.12.7 Tyres: checking foam-filled tyres 296
5.12.8 Checking tightening torque of the wheel nuts 296
5.13 Working attachment 297
5.13.1 Lubricating working tool 297
5.13.2 Checking pin connections for secure seating 297
for wear 294
5.12.6 Checking tyre pressure 294
5.12.7 Tyres: checking foam-filled tyres 296
5.12.8 Checking tightening torque of the wheel nuts 296
5.13 Working attachment 297
5.13.1 Lubricating working tool 297
5.13.2 Checking pin connections for secure seating 297
copyright ® Liebherr-Hydraulikbagger GmbH 2015
LH 60 C HR-1212 Litronic (USA / CAN) / 64724 LIEBHERR 15
Contents
Contents
Operator’s manual
6
5.13.3 Checking steel structure for cracks 297
5.13.4 Pin bearing: Checking for wear 298
5.13.5 Energy recuperation cylinder: Performing visual inspection 298
5.13.6 Functional test 298
5.14 Operator’s cab, heating and air conditioning unit 299
5.14.1 Filling with windscreen washer fluid 299
5.14.2 Heating: Checking function 299
5.14.3 Auxiliary heater (option): Checking function 301
5.14.4 Switching on air conditioning unit 301
5.14.5 Checking and cleaning condenser 301
5.15 Lubrication system 303
5.15.1 Lubrication system: Filling grease 303
5.15.2 Checking lubrication of bearings (grease collar) 303
5.15.3 Pipes, hoses and lubricating points: Checking tightness and condition 304
Appendix 305
Index 307
5.13.4 Pin bearing: Checking for wear 298
5.13.5 Energy recuperation cylinder: Performing visual inspection 298
5.13.6 Functional test 298
5.14 Operator’s cab, heating and air conditioning unit 299
5.14.1 Filling with windscreen washer fluid 299
5.14.2 Heating: Checking function 299
5.14.3 Auxiliary heater (option): Checking function 301
5.14.4 Switching on air conditioning unit 301
5.14.5 Checking and cleaning condenser 301
5.15 Lubrication system 303
5.15.1 Lubrication system: Filling grease 303
5.15.2 Checking lubrication of bearings (grease collar) 303
5.15.3 Pipes, hoses and lubricating points: Checking tightness and condition 304
Appendix 305
Index 307
Customer Support: [email protected]
https://vimeo.com/836892204?share=copy
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V
