Trusted Business
Verified & Licensed
Virus Free Files
100% Safe Downloads
Secure Payment
SSL Protected
Instant Delivery
Available Immediately
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
$28.95
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 60 M Litronic High-Rise
Type no.: 1217
From Serial no.: 71365
Instant PDF Download
Available immediately
Save to Your Device
Download & keep forever
Antivirus Scanned
100% virus-free
Trusted Worldwide
175,000+ customers
Description
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
Language : English
Pages : 392
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 60 M Litronic High-Rise
Type no.: 1217
From Serial no.: 71365
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
Liability and warranty:
- Due to the wide variety of products offered by other manufacturers (e.g. service products, lubricants, tool attachments and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
- Third-party products are used in or on Liebherr machines at the user’s own discretion.
Liebherr does not offer any warranty or accept any liability for losses of anykind caused by failures of or damage to Liebherr machines attributable to the use of third-party products. - Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.
Modifications, conditions, copyright:
- Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
- Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
- The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.
TABLE OF CONTENTS:
Liebherr LH 60 M Litronic High-Rise 1217 Machine for Industrial Applications Operator’s Manual SN 71365 – PDF DOWNLOAD
1 Product description 19
1.1 Technical description 20
1.1.1 General overview 20
1.1.2 Uppercarriage 21
1.1.3 Undercarriage 22
1.2 Technical data 23
1.2.1 Vibration emission 23
1.2.2 CO2 emissions of diesel engine 23
1.2.3 Sound level 24
1.2.4 Specifications 25
2 Safety warnings 27
2.1 Information on these instructions 27
21.1 Representation of warning messages 27
2.1.2 Graphic symbols in these instructions 27
2.2 Intended use 28
2.21 Laws, rules, guidelines and safety regulations 28
2.22 Foreseeable misuse 28
2.2.3 Operating conditions 29
2.2.4 Disposal 30
2.3 Description of staff 30
2.3.1 Personal protective equipment 30
2.3.2 Requirements for staff 31
2.3.3 Operating company 31
2.3.4 Operator 32
2.3.5 Maintenance staff 32
2.3.6 Electrical engineer 33
2.3.7 Refrigeration technician 34
2.3.8 Slinger 35
1.1 Technical description 20
1.1.1 General overview 20
1.1.2 Uppercarriage 21
1.1.3 Undercarriage 22
1.2 Technical data 23
1.2.1 Vibration emission 23
1.2.2 CO2 emissions of diesel engine 23
1.2.3 Sound level 24
1.2.4 Specifications 25
2 Safety warnings 27
2.1 Information on these instructions 27
21.1 Representation of warning messages 27
2.1.2 Graphic symbols in these instructions 27
2.2 Intended use 28
2.21 Laws, rules, guidelines and safety regulations 28
2.22 Foreseeable misuse 28
2.2.3 Operating conditions 29
2.2.4 Disposal 30
2.3 Description of staff 30
2.3.1 Personal protective equipment 30
2.3.2 Requirements for staff 31
2.3.3 Operating company 31
2.3.4 Operator 32
2.3.5 Maintenance staff 32
2.3.6 Electrical engineer 33
2.3.7 Refrigeration technician 34
2.3.8 Slinger 35
2.3.9 Spotter 35
2.4 Signs on the machine 36
2.41 Warning signs 36
2.42 Information signs 41
2.4.3 Control description sticker 45
2.44 Identification plate 46
2.5 Protective devices on the machine 46
2.51 Safety lever or folding console 46
2.5.2 Operator’s cab 46
2.5.3 Height-adjustable operator’s cab 47
2.5.4 Roll over protective structure (ROPS) 47
2.5.5 Falling object protective structures (FOPS and FGPS) 48
2.6 Emergency equipment on the machine 48
2.6.1 Emergency exit (rescue system) 48
2.6.2 Fire extinguisher (option) 49
2.6.3 Emergency command devices of machine 49
2.6.4 Emergency stop function of machine 49
2.7 Safe operation 50
2.7.1 Intoxicants 50
2.7.2 Dangerous fuels and operating fluids 50
2.7.3 Transporting machine 50
2.7.4 Access to machine 51
2.7.5 Machine danger zone 52
2.7.6 Visibility 52
2.7.7 Protection against vibration 53
2.7.8 Operation of machine 54
2.7.9 Load-lifting work 56
2.8 Safe work 57
2.8.1 Machine with turret 57
2.8.2 Machines with height adjustable cab 57
2.9 Safe maintenance 58
2.9.1 Spare parts 58
29.2 Heavy parts 58
2.9.3 Regular checks 59
2.10 Modifications to the machine 59
2.10.1 Modifications, add-ons and retrofittings 59
3 Control and operation 61
3.1 Control and operating elements 61
3.1.1 Overview of operator’s platform 61
3.1.2 Control unit A 63
3.1.3 Control unit B 64
3.1.4 Further control units 64
3.2 Display 65
3.2.1 Display 65
3.2.2 Status symbols 66
3.2.3 Start page menu 79
3.24 Camera menu 80
3.2.5 Automatic air conditioning 81
3.26 Operating status menu 85
3.2.7 Diesel particulate filter submenu (option) 85
2.4 Signs on the machine 36
2.41 Warning signs 36
2.42 Information signs 41
2.4.3 Control description sticker 45
2.44 Identification plate 46
2.5 Protective devices on the machine 46
2.51 Safety lever or folding console 46
2.5.2 Operator’s cab 46
2.5.3 Height-adjustable operator’s cab 47
2.5.4 Roll over protective structure (ROPS) 47
2.5.5 Falling object protective structures (FOPS and FGPS) 48
2.6 Emergency equipment on the machine 48
2.6.1 Emergency exit (rescue system) 48
2.6.2 Fire extinguisher (option) 49
2.6.3 Emergency command devices of machine 49
2.6.4 Emergency stop function of machine 49
2.7 Safe operation 50
2.7.1 Intoxicants 50
2.7.2 Dangerous fuels and operating fluids 50
2.7.3 Transporting machine 50
2.7.4 Access to machine 51
2.7.5 Machine danger zone 52
2.7.6 Visibility 52
2.7.7 Protection against vibration 53
2.7.8 Operation of machine 54
2.7.9 Load-lifting work 56
2.8 Safe work 57
2.8.1 Machine with turret 57
2.8.2 Machines with height adjustable cab 57
2.9 Safe maintenance 58
2.9.1 Spare parts 58
29.2 Heavy parts 58
2.9.3 Regular checks 59
2.10 Modifications to the machine 59
2.10.1 Modifications, add-ons and retrofittings 59
3 Control and operation 61
3.1 Control and operating elements 61
3.1.1 Overview of operator’s platform 61
3.1.2 Control unit A 63
3.1.3 Control unit B 64
3.1.4 Further control units 64
3.2 Display 65
3.2.1 Display 65
3.2.2 Status symbols 66
3.2.3 Start page menu 79
3.24 Camera menu 80
3.2.5 Automatic air conditioning 81
3.26 Operating status menu 85
3.2.7 Diesel particulate filter submenu (option) 85
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 86
3.29 System settings menu 87
3.2.10 Operating hour meter and odometer submenu 88
3.2.11 Windscreen wiper interval submenu 88
3.2.12 Radio remote control submenu 89
3.2.13 Display settings submenu 90
3.2.14 Display brightness and display volume submenu 90
3.2.15 Camera image contrast submenu 91
3.2.16 Camera return time submenu 91
3.2.17 Regional settings and system parameters submenu 92
3.2.18 Unit selection submenu 92
3.2.19 System diagnosis submenu 93
3.2.20 Time zone submenu 93
3.2.21 Time format and date format submenu 94
3.2.22 Language selection submenu 94
3.2.23 Electrical outputs submenu 95
3.2.24 Electrical inputs submenu 96
3.2.25 Function settings menu 96
submenu (option) 86
3.29 System settings menu 87
3.2.10 Operating hour meter and odometer submenu 88
3.2.11 Windscreen wiper interval submenu 88
3.2.12 Radio remote control submenu 89
3.2.13 Display settings submenu 90
3.2.14 Display brightness and display volume submenu 90
3.2.15 Camera image contrast submenu 91
3.2.16 Camera return time submenu 91
3.2.17 Regional settings and system parameters submenu 92
3.2.18 Unit selection submenu 92
3.2.19 System diagnosis submenu 93
3.2.20 Time zone submenu 93
3.2.21 Time format and date format submenu 94
3.2.22 Language selection submenu 94
3.2.23 Electrical outputs submenu 95
3.2.24 Electrical inputs submenu 96
3.2.25 Function settings menu 96
3.2.26 Central lubrication system submenu (option) 98
3.2.27 Maintenance submenu 98
3.2.28 SF submenu 100
3.2.29 Stick cylinder shut-off submenu (option) 102
3.2.30 Hoist cylinder shut-off submenu (option) 103
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 103
3.2.32 Workspace limitation submenu (option) 104
3.2.33 Automatic reversible fan drive submenu (option) 104
3.2.34 Comfort slewing brake submenu (option) 105
3.2.35 Bleeding hydraulic circuit submenu 106
3.2.36 Information menu 106
3.2.37 Operating time submenu 107
3.2.38 Fuel consumption submenu 108
3.2.39 Key assignment submenu 108
3.2.40 Tool Control menu 109
3.2.41 Service codes menu 109
3.3 Control mM
3.3.1 Battery main switch 11
3.3.2 Entering and exiting machine 112
3.3.3 Step lighting 113
3.3.4 Emergency exit 114
3.3.5 Emergency exit — two-way adjustable operator’s cab LHC D-730
(option) 116
3.3.6 Fire extinguisher (option) 117
3.3.7 Folding console 117
3.3.8 Operator’s seat 119
3.3.9 Safety belt 125
3.3.10 Exit protection (option) 126
3.3.11 Steering wheel 127
3.3.12 Ignition key 127
3.3.13 Confirmation button 128
3.3.14 Horn 129
3.3.15 Raising and lowering operator’s cab (option) 130
3.3.16 Raising and lowering two-way adjustable cab (option) 132
3.3.17 Windscreen 135
3.2.27 Maintenance submenu 98
3.2.28 SF submenu 100
3.2.29 Stick cylinder shut-off submenu (option) 102
3.2.30 Hoist cylinder shut-off submenu (option) 103
3.2.31 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 103
3.2.32 Workspace limitation submenu (option) 104
3.2.33 Automatic reversible fan drive submenu (option) 104
3.2.34 Comfort slewing brake submenu (option) 105
3.2.35 Bleeding hydraulic circuit submenu 106
3.2.36 Information menu 106
3.2.37 Operating time submenu 107
3.2.38 Fuel consumption submenu 108
3.2.39 Key assignment submenu 108
3.2.40 Tool Control menu 109
3.2.41 Service codes menu 109
3.3 Control mM
3.3.1 Battery main switch 11
3.3.2 Entering and exiting machine 112
3.3.3 Step lighting 113
3.3.4 Emergency exit 114
3.3.5 Emergency exit — two-way adjustable operator’s cab LHC D-730
(option) 116
3.3.6 Fire extinguisher (option) 117
3.3.7 Folding console 117
3.3.8 Operator’s seat 119
3.3.9 Safety belt 125
3.3.10 Exit protection (option) 126
3.3.11 Steering wheel 127
3.3.12 Ignition key 127
3.3.13 Confirmation button 128
3.3.14 Horn 129
3.3.15 Raising and lowering operator’s cab (option) 130
3.3.16 Raising and lowering two-way adjustable cab (option) 132
3.3.17 Windscreen 135
3.3.18 Sun blind 137
3.3.19 Viewing devices 138
3.3.20 Lighting 140
3.3.21 Cab lighting system 141
3.3.22 Beacon (option) 142
3.3.23 Windscreen wipers 143
3.3.24 Windscreen washer system 143
3.3.25 Auxiliary heater (option) 144
3.3.26 LiDAT (option) 144
3.4 Operation 145
3.4.1 Inspection tour before putting into service 145
3.4.2 Refuelling 146
3.4.3 Refuelling with electric refuelling pump (option) 147
34.4 Filling with diesel exhaust fluid 148
3.4.5 Preheating system for fuels and operating fluids (option) 149
3.46 Immobiliser (option) 161
3.4.7 Preparing machine for dust intensive application 153
3.4.8 Preparing machine for use in biologically sensitive areas 153
3.4.9 Operator code (option) 153
3.4.10 Starting diesel engine 154
3.4.11 Bringing machine to operating temperature 155
3.4.12 Engine speed and operating mode 155
3.4.13 After starting 157
3.4.14 Sensor-controlled low idle automatic 1568
3.4.15 Automatic engine stop after idling (option) 168
3.4.16 Shutting off diesel engine 159
3.4.17 Shutting off diesel engine in an emergency 160
3.4.18 Travelling and braking 161
3.4.19 Joystick steering 163
3.4.20 Travel alarm (option) 164
3.4.21 Locking and unlocking oscillating axle 165
3.4.22 Observe the inclination angle 166
3.4.23 Supporting machine 167
3.4.24 Controlling working attachment 170
3.4.25 Turning and braking uppercarriage 171
3.4.26 Slewing brake 171
3.4.27 Positioning slewing brake 176
3.4.28 Hoist cylinder pressure warming device (option) 177
3.4.29 Lowering boom actively (option) 177
3.4.30 Retracting stick actively (option) 177
3.4.31 Selecting the working tool 178
3.4.32 Controlling special working attachment with mini-joystick 178
3.4.33 Changing over control of right mini-joystick (option) 179
3.4.34 Grapple priority (option) 181
3.4.35 AutoLift (Option) 182
3.4.36 Magnet system (option) 182
3.4.37 Reversible fan drive for radiator cleaning (option) 184
Shut-off functions 186
3.5.1 Stick cylinder shut-off (option) 186
3.5.2 Hoist cylinder shut-off (option) 189
3.5.3 Height limitation 193
3.5.4 Depth limitation (option) 202
3.56.5 Overload warning system (option) 214
3.5.6 Load moment limitation (option) 216
General working methods 223
3.6.1 Working without damaging the machine 223
3.6.2 Putting machine in working position 224
3.6.3 Travelling at operating location 225
3.6.4 Travelling under obstacles 226
3.6.5 Handling loads 226
3.6.6 Loading transport vehicle 227
3.6.7 Lifting loads 227
3.6.8 Use of banksmen 228
Installing and removing working attachment 229
3.7.1 Using quick coupler 229
3.7.2 Installing and removing grapple on industrial stick 229
3.7.3 Installing and removing boom 232
Parking machine 233
Transport and assembly 234
3.10 Emergency operation 235
3.3.19 Viewing devices 138
3.3.20 Lighting 140
3.3.21 Cab lighting system 141
3.3.22 Beacon (option) 142
3.3.23 Windscreen wipers 143
3.3.24 Windscreen washer system 143
3.3.25 Auxiliary heater (option) 144
3.3.26 LiDAT (option) 144
3.4 Operation 145
3.4.1 Inspection tour before putting into service 145
3.4.2 Refuelling 146
3.4.3 Refuelling with electric refuelling pump (option) 147
34.4 Filling with diesel exhaust fluid 148
3.4.5 Preheating system for fuels and operating fluids (option) 149
3.46 Immobiliser (option) 161
3.4.7 Preparing machine for dust intensive application 153
3.4.8 Preparing machine for use in biologically sensitive areas 153
3.4.9 Operator code (option) 153
3.4.10 Starting diesel engine 154
3.4.11 Bringing machine to operating temperature 155
3.4.12 Engine speed and operating mode 155
3.4.13 After starting 157
3.4.14 Sensor-controlled low idle automatic 1568
3.4.15 Automatic engine stop after idling (option) 168
3.4.16 Shutting off diesel engine 159
3.4.17 Shutting off diesel engine in an emergency 160
3.4.18 Travelling and braking 161
3.4.19 Joystick steering 163
3.4.20 Travel alarm (option) 164
3.4.21 Locking and unlocking oscillating axle 165
3.4.22 Observe the inclination angle 166
3.4.23 Supporting machine 167
3.4.24 Controlling working attachment 170
3.4.25 Turning and braking uppercarriage 171
3.4.26 Slewing brake 171
3.4.27 Positioning slewing brake 176
3.4.28 Hoist cylinder pressure warming device (option) 177
3.4.29 Lowering boom actively (option) 177
3.4.30 Retracting stick actively (option) 177
3.4.31 Selecting the working tool 178
3.4.32 Controlling special working attachment with mini-joystick 178
3.4.33 Changing over control of right mini-joystick (option) 179
3.4.34 Grapple priority (option) 181
3.4.35 AutoLift (Option) 182
3.4.36 Magnet system (option) 182
3.4.37 Reversible fan drive for radiator cleaning (option) 184
Shut-off functions 186
3.5.1 Stick cylinder shut-off (option) 186
3.5.2 Hoist cylinder shut-off (option) 189
3.5.3 Height limitation 193
3.5.4 Depth limitation (option) 202
3.56.5 Overload warning system (option) 214
3.5.6 Load moment limitation (option) 216
General working methods 223
3.6.1 Working without damaging the machine 223
3.6.2 Putting machine in working position 224
3.6.3 Travelling at operating location 225
3.6.4 Travelling under obstacles 226
3.6.5 Handling loads 226
3.6.6 Loading transport vehicle 227
3.6.7 Lifting loads 227
3.6.8 Use of banksmen 228
Installing and removing working attachment 229
3.7.1 Using quick coupler 229
3.7.2 Installing and removing grapple on industrial stick 229
3.7.3 Installing and removing boom 232
Parking machine 233
Transport and assembly 234
3.10 Emergency operation 235
14
copyright ® Liebherr-Hydraulikbagger GmbH 2018
LH 60 M Litronic – 1217 / 71365
LHBM2218479/01/2018-12-19/en
LHB/M2216479/01/2018-12-19/en
LHB/M2216479/01/2018-12-19/en
Operator’s manual
Contents
3.10.1 Jump starting 235
3.10.2 Lowering working attachment when engine is shut off 236
3.10.3 Lowering operator’s cab in an emergency (option) 236
3.10.4 Towing the machine 237
4 Malfunctions 239
4.1 Service code tables 239
41.1 Warning symbols 239
4.2 Fault – Cause – Remedy 246
4.21 Diesel engine and fuel system 246
422 Hydraulic system 249
42.3 Electrical system 250
4.2.4 Heating, ventilation and air conditioning unit 250
4.2.5 Working attachment 251
4.3 Problem remedy 252
4.3.1 Fuses and relays in the uppercarriage 252
4.3.2 Operator’s platform fuses and relays 258
5 Maintenance 265
5.1 Inspection and maintenance schedule 265
5.2 Filling quantities and lubrication chart 272
5.2.1 Filling quantities 272
5.2.2 Lubricating chart 274
5.3 Fuels, lubricants and operating fluids 276
5.3.1 Diesel fuels 276
5.3.2 Diesel exhaust fluids 276
5.3.3 Engine oils 277
5.3.4 Refrigerant 278
53.5 Coolant 279
5.3.6 Hydraulic oils 280
53.7 Axle oils 282
5.3.8 Gear oils 283
5.3.9 Pump distributor gear oils 283
5.3.10 Energy recuperation cylinder oils 284
5.3.11 Greases 285
copyright © Liebherr-Hydraulikbagger GmbH 2018
copyright © Liebherr-Hydraulikbagger GmbH 2018
LH 60 M Litronic – 1217 / 71365 LIEBHERR 15
Contents Operator’s manual
Contents Operator’s manual
5.3.12 Windscreen washer fluid 285
5.3.13 Lubricants and care products for electrical and mechanical systems 285
5.4 Access points for maintenance work 286
5.4.1 Access points on uppercarriage 286
5.4.2 Access points under the uppercarriage 288
5.5 Preparing for maintenance 289
5.5.1 Preparing for maintenance 289
5.6 General maintenance 291
5.6.1 Welding 291
5.6.2 Corrosion-proofing piston rods 291
5.6.3 Cleaning the machine 292
5.6.4 Cleaning the fan and radiator 294
5.7 Complete machine 295
5.7.1 Checking machine for proper condition and tightness 295
5.7.2 Checking components for cracks 295
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 295
5.7.4 Cleaning and treating rubber seals on doors and hoods 295
5.7.5 Checking rescue system (option) 296
5.8 Drive group 297
5.8.1 Diesel engine: Bringing into maintenance position 297
5.8.2 Diesel engine: Checking oil level 297
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 298
5.8.4 Fuel pre-filter: Draining water 299
5.8.5 Fuel tank: Draining water and sediments 299
5.8.6 Air filter: Emptying dust collecting tank 301
5.8.7 Air filter: Replacing main filter cartridge 302
5.8.8 Air filter: Replacing safety filter cartridge 304
5.8.9 Air filter and air lines: Checking tightness and condition 305
5.8.10 Pump distributor gear: Checking oil level 307
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 308
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 313
5.9 Cooling system 315
5.9.1 Checking coolant level 315
5.10 Working hydraulics 317
5.3.13 Lubricants and care products for electrical and mechanical systems 285
5.4 Access points for maintenance work 286
5.4.1 Access points on uppercarriage 286
5.4.2 Access points under the uppercarriage 288
5.5 Preparing for maintenance 289
5.5.1 Preparing for maintenance 289
5.6 General maintenance 291
5.6.1 Welding 291
5.6.2 Corrosion-proofing piston rods 291
5.6.3 Cleaning the machine 292
5.6.4 Cleaning the fan and radiator 294
5.7 Complete machine 295
5.7.1 Checking machine for proper condition and tightness 295
5.7.2 Checking components for cracks 295
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 295
5.7.4 Cleaning and treating rubber seals on doors and hoods 295
5.7.5 Checking rescue system (option) 296
5.8 Drive group 297
5.8.1 Diesel engine: Bringing into maintenance position 297
5.8.2 Diesel engine: Checking oil level 297
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 298
5.8.4 Fuel pre-filter: Draining water 299
5.8.5 Fuel tank: Draining water and sediments 299
5.8.6 Air filter: Emptying dust collecting tank 301
5.8.7 Air filter: Replacing main filter cartridge 302
5.8.8 Air filter: Replacing safety filter cartridge 304
5.8.9 Air filter and air lines: Checking tightness and condition 305
5.8.10 Pump distributor gear: Checking oil level 307
5.8.11 Diesel particulate filter: Activating and deactivating regeneration 308
5.8.12 Diesel particulate filter: Checking tightening torque of filter module
profile clamps 313
5.9 Cooling system 315
5.9.1 Checking coolant level 315
5.10 Working hydraulics 317
copyright ® Liebherr-Hydraulikbagger GmbH 2018
16 LIEBHERR LH 60 M Litronic – 1217 / 71365
LHBM2218479/01/2018-12-19/en
LHB/M2216479/01/2018-12-19/en
LHB/M2216479/01/2018-12-19/en
Operator’s manual Contents
5.10.1 Depressurising hydraulic system 317
5.10.2 Hydraulic tank: Checking oil level 317
5.10.3 Hydraulic tank: Draining water and sediments 320
5.10.4 Return filter: Checking and cleaning magnetic rod 322
5.10.5 Return leakage oil filter: Replacing filter cartridge 323
5.10.6 Bypass filter (option): Checking degree of contamination of filter
5.10.1 Depressurising hydraulic system 317
5.10.2 Hydraulic tank: Checking oil level 317
5.10.3 Hydraulic tank: Draining water and sediments 320
5.10.4 Return filter: Checking and cleaning magnetic rod 322
5.10.5 Return leakage oil filter: Replacing filter cartridge 323
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge 324
5.11 Electrical system 325
5.11.1 General information 325
5.12 Axles 326
5.12.1 Screw plug tightening torques 326
5.12.2 Lubricating axles 326
5.12.3 Tyres: checking foam-filled tyres 327
5.12.4 Wheels: Checking mounting of wheel nuts 328
5.13 Working attachment 329
5.13.1 Lubricating working tool 329
5.13.2 Checking pin connections for secure seating 329
5.13.3 Checking steel parts for cracks 329
5.13.4 Pin bearing: checking for wear 330
5.13.5 Energy recuperation cylinder: Performing visual inspection 330
5.14 Operator’s cab, heating and air conditioning 331
5.14.1 Filling with windscreen washer fluid 331
5.14.2 Heating: Checking function 331
5.14.3 Auxiliary heater (option): Checking function 333
5.14.4 Switching on air conditioning unit 333
5.14.5 Checking and cleaning air conditioning condenser 334
5.15 Lubrication system 335
5.15.1 Checking lubrication of bearings (grease collar) 335
5.15.2 Pipes, hoses and lubricating points: Checking tightness and condition 335
5.16 Slewing gearbox and slewing ring 336
5.16.1 Slewing gearbox: Checking oil level 336
6 Appendix 339
Index 341
IMAGES PREVIEW OF THE MANUAL:
Need help? Contact: [email protected]
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V
