Liebherr LH 60C Litronic Operator’s manual – PDF DOWNLOAD

Description

Liebherr LH 60C Litronic Operator’s manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr LH 60C Litronic Operator’s manual – PDF DOWNLOAD

Language : English
Pages :390 
Downloadable : Yes
File Type : PDF
Size: 82.6 MB

DESCRIPTION:

Liebherr LH 60C Litronic Operator’s manual – PDF DOWNLOAD

Product ID
Manufacturer:Liebherr-Hydraulikbagger GmbH
Type:LH 60 e Litronic
Type no :1528 (USA / CAN)
From Serial NO:71766

Preface

• This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.
• Examples of this work include:

• The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.
• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Liebherr LH 60C Litronic Operator’s manual – PDF DOWNLOAD

Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.2 Technical data 19
1.2.1 Vibration emission 19
1.2.2 CO2 emissions of diesel engine 19
1.2.3 Sound level 21
1.2.4 Specifications 22
1.3 Warranty conditions 23
1.3.1 Additional information, USA 23
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 23
1.3.3 Warranty coverage from manufacturer
1.3.4 Warranty obligations of the owner
1.3.5 Warranty
1.3.6 Warranty parts
1.3.7 Exclusions
2 Safety warnings
2.1 lnformation on these instructions
2.1.1 Representation of warning messages
2.1.2 Graphic symbols in these instructions
2.2 lntended use
2.2.1 Laws, rules, guidelines and safety regulations
2.2.2 lntended use
2.2.3 Foreseeable misuse
2.2.4 Operating conditions
2.2.5 Disposal
2.3 Description of staff
2.3.1 Personal protective equipment
Operator’s manual
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 35
2.3.8 Slinger 35
2.3.9 Spotter 36
Signs on the machine 37
2.4.1 Location of signs 37
2.4.2 Safety signs and information signs (USA) 41
2.4.3 ldentification tag (USA) 50
Protective devices on the machine 50
2.5.1 Safety lever or folding console 50
2.5.2 Operator’s cab 51
2.5.3 Height-adjustable operator’s cab 51
2.5.4 Roll over protective structure (ROPS) 52
2.5.5 Falling object protective structures (FOPS and FGPS) 52
Emergency equipment on the machine
2.6.1 Emergency exit (standard)
2.6.2 Fire extinguisher (option)
2.6.3 Emergency command devices of machine
2.6.4 Emergency stop function of machine
Safe operation
2.7.1 lntoxicants
2.7.2 Dangerous fuels and operating fluids
2.7.3 Transporting machine
2.7.4 Access to machine
2.7.5 Machine danger zone
2.7.6 Visibility
2.7.7 Protection against vibration
2.7.8 Operation of machine
2.7.9 Load-lifting work
2.9 Safe maintenance
2.9.1 Spare parts
2.9.2 Heavy parts
2.9.3 Regular checks
2.10 Modifications to the machine
2.10.1 Modifications, add-ons and retrofittings
3 Control and operation
3.1 Contrai and operating elements
3.1.1 Overview of operator’s platform
3.1.2 Contrai unit A
3.1.3 Contrai unit B
3.1.4 Further contrai units
3.1.5 Symbols on contrai description sticker
3.2 Display
3.2.1 Display
3.2.2 Status symbols
3.2.3 Start page menu
3.2.4 Camera menu
3.2.5 Air conditioning
3.2.6 Operating status menu
3.2.7 Diesel particulate filter submenu (option)
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option)
3.2.9 System settings menu
3.2.10 Operating hour meter and odometer submenu
3.2.11 Windscreen wiper interval submenu
3.2.12 Radio remate contrai submenu
3.2.13 Display settings submenu
3.2.14 Display brightness and display volume submenu
3.2.15 Camera image contrast submenu
3.2.16 Camera return time submenu
3.2.17 Regional settings and system parameters submenu
3.2.18 Unit selection submenu
3.2.19 System diagnosis submenu
Contents Operator’s manual
3.2.20 Time zone submenu 104
3.2.21 Time format and date format submenu 105
3.2.22 Language selection submenu 105
3.2.23 Electrical outputs submenu 106
3.2.24 Electrical inputs submenu 107
3.2.25 Function settings menu 107
3.2.26 Central lubrication system submenu (option) 109
3.2.27 Maintenance submenu 109
3.2.28 SF submenu 111
3.2.29 User profile submenu 113
3.2.30 Stick cylinder shut-off submenu (option) 114
3.2.31 Hoist cylinder shut-off submenu (option) 114
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 115
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 116
3.2.34 Workspace limitation submenu (option) 116
3.2.35 Automatic reversible fan drive submenu (option) 117
3.2.36 Comfort slewing brake submenu (option) 118
3.2.37 Bleeding hydraulic circuit submenu 118
3.2.38 lnformation menu 119
3.2.39 Operating time submenu 120
3.2.40 Fuel consumption submenu 120
3.2.41 Key assignment submenu 121
3.2.42 Tool Control menu 121
3.2.43 Service cedes menu 122
3.3 Control 124
3.3.1 Battery main switch 124
3.3.2 Entering and exiting machine 125
3.3.3 Step lighting (option) 126
3.3.4 Emergency exit 126
3.3.5 Fire extinguisher (option) 127
3.3.6 Folding console 127
3.3.7 Operator’s seat 129
3.3.8 Safety belt 136
3.3.9 Exit protection (option) 138
3.3.10 lgnition key 139
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 60 C Litronic – 1528 (USA / CAN) 10 llEBHERR /71766
Operator’s manual Contents
3.3.11 Confirmation button 139
3.3.12 Horn 140
3.3.13 Raising and lowering operator’s cab (option) 141
3.3.14 Windscreen 143
3.3.15 Sun blind 145
3.3.16 Viewing devices 146
3.3.17 Lighting 147
3.3.18 Cab lighting system 148
3.3.19 Beacon (option) 149
3.3.20 Windscreen wipers 150
3.3.21 Windscreen washer system 150
3.3.22 Auxiliary heater (option) 151
3.3.23 LiDAT (option) 151
3.4 Operation 153
3.4.1 lnspection tour before putting into service 153
3.4.2 Refuelling 154
3.4.3 Refuelling with electric refuelling pump (option) 154
3.4.4 Filling with diesel exhaust fluid 156
3.4.5 Preheating system for fuels and operating fluids (option) 157
3.4.6 lmmobiliser (option) 159
3.4.7 Preparing machine for dust intensiva application 160
3.4.8 Preparing machine for use in biologically sensitiva areas 161
3.4.9 Operator code (option) 161
3.4.10 Starting diesel engine 162
3.4.11 Bringing machine to operating temperatura 163
3.4.12 Engine speed and operating mode 163
3.4.13 After starting 165
3.4.14 Sensor-controlled low idle automatic 166
3.4.15 Automatic engine stop after idling (option) 166
3.4.16 Shutting off diesel engine 167
3.4.17 Shutting off diesel engine in an emergency 167
3.4.18 Travelling and braking 168
3.4.19 Travei alarm (option) 171
3.4.20 Controlling working attachment 171
3.4.21 Turning and braking uppercarriage 172
LH 60 C Litronic – 1528 (USA / CAN)
Operator’s manual
3.4.22 Slewing brake 173
3.4.23 Positioning slewing brake 178
3.4.24 Hoist cylinder pressure warning device (option) 178
3.4.25 Lowering boom actively (option) 178
3.4.26 Selecting the working tool 179
3.4.27 Controlling special working attachment with mini-joystick 179
3.4.28 Changing over control of right mini-joystick (option) 180
3.4.29 Grapple priority (option) 181
3.4.30 AutoLift (Option) 182
3.4.31 Magnet system (option) 183
3.4.32 Reversible fan drive for radiator cleaning (option) 184
Shut-off functions 187
3.5.1 Stick cylinder shut-off (option) 187
3.5.2 Hoist cylinder shut-off (option) 190
3.5.3 Height limitation 194
3.5.4 Depth limitation (option) 204
3.5.5 Overload warning system (option) 212
3.5.6 Load moment limitation (option) 213
General working methods 219
3.6.1 Working without damaging the machine 219
3.6.2 Putting machine in working position 220
3.6.3 Travelling at operating location 221
3.6.4 Travelling with load at operating location 222
3.6.5 Handling loads 223
3.6.6 Loading transport vehicle 223
3.6.7 Lifting loads 224
3.6.8 Use of banksmen 225
lnstalling and removing working attachment 233
3.7.1 Using quick coupler 233
3.7.2 lnstalling and removing grapple on industrial stick 233
3.7.3 lnstalling and removing boom 236
Parking machine 237
Transport 238
3.9.1 Preparatory work 238
3.9.2 Driving machine onto low-loader 238
copyright© Liebherr-Hydraulikbagger GmbH 2020
llEBHERR LH 60 C Litronic – 1528 (USA / CAN)
/71766
Operator’s manual
3.9.3 Tying down machine
3.9.4 After transport
3.10 Emergency operation
3.10.1 Jump starting
3.10.2 Lowering working attachment when engine is shut off
3.10.3 Lowering operator’s cab in an emergency (option)
3.10.4 Towing the machine
4 Malfunctions
4.1 Service code tables
4.1.1 Warning symbols
4.2 Fault – Cause – Remedy
4.2.1 Diesel engine and fuel system
4.2.2 Hydraulic system
4.2.3 Travei gear
4.2.4 Electrical system
4.2.5 Heating, ventilation and air conditioning unit
4.2.6 Working attachment
4.3 Problem remedy
4.3.1 Fuses and relays in the uppercarriage
4.3.2 Operator’s platform fuses and relays
5 Maintenance
5.1 lnspection and maintenance schedule
5.2 Filling quantities and lubrication chart
5.2.1 Filling quantities
5.2.2 Lubrication chart
5.3 Fuels, lubricants and operating fluids
5.3.1 General information about lubricants and fuels
5.3.2 Diesel fuels
5.3.3 Diesel exhaust fluids
5.3.4 Engine oils
5.3.5 Refrigerant
5.3.6 Coolant
5.3.7 Hydraulic oils
Operator’s manual
5.3.8 Gearoils 289
5.3.9 Pump distributor gear oils 290
5.3.10 Energy recuperation cylinder oils 291
5.3.11 Greases 291
5.3.12 Windscreen washer fluid 292
5.3.13 Lubricants and care products for electrical and mechanical systems 292
Access points for maintenance work 293
5.4.1 Access points on uppercarriage 293
5.4.2 Access points under the uppercarriage 295
5.4.3 Access points on undercarriage 296
Preparing for maintenance 297
5.5.1 Maintenance procedures 297
5.5.2 Preparing for maintenance 298
5.5.3 Putting machine in maintenance position 300
General maintenance 301
5.6.1 Welding 301
5.6.2 Corrosion-proofing piston rods 301
5.6.3 Cleaning the machine 302
5.6.4 Cleaning travei gear 303
5.6.5 Cleaning fan and radiator 304
Complete machine 305
5.7.1 Checking machine for proper condition and tightness 305
5.7.2 Lubricating bearings on machine and working attachment 310
5.7.3 Checking components for cracks 312
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 313
5.7.5 Checking rescue system (option) 313
Drive group 315
5.8.1 Diesel engine: Bringing into maintenance position 315
5.8.2 Diesel engine: Checking oil level 315
5.8.3 Fuel pre-filter: Draining water 316
5.8.4 Fuel tank: Draining water and sediments 317
5.8.5 Air filter: Emptying dust collecting tank 319
5.8.6 Air filter: Replacing main filter cartridge 320
5.8.7 Air filter: Replacing safety filter cartridge 322
copyright© Liebherr-Hydraulikbagger GmbH 2020
llEBHERR LH 60 C Litronic – 1528 (USA / CAN)
/71766
Operator’s manual
5.8.8 Pump distributor gear: Checking oil level
5.8.9 Diesel particulate filter: Activating and deactivating regeneration
5.9 Cooling system
5.9.1 Checking coolant level
5.9.2 Checking cooling system and heat exchanger for contamination
5.10 Working hydraulics
5.10.1 Depressurising hydraulic system
5.10.2 Hydraulic tank: Checking oil level
5.10.3 Hydraulic tank: Draining water and sediments
5.10.4 Return filter: Checking and cleaning magnetic rod
5.10.5 Return leakage oil filter: Replacing filter cartridge
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge
5.11 Electrical system
5.11.1 General information
5.12 Travei gear
5.12.1 Checking track tension
5.12.2 Tightening track
5.12.3 Slackening track
5.12.4 Determining track type
5.13 Working attachment
5.13.1 Lubricating working tool
5.13.2 Checking pin bearings for wear
5.14 Operator’s cab, heating and air conditioning
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
5.14.5 Checking and cleaning air conditioning condenser
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
lndex

Customer Support: [email protected]

https://vimeo.com/824349244?share=copy

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M