Liebherr Material handling machine LH 110 C Litronic High Rise Operator’s Manual – PDF DOWNLOAD

Description

Liebherr Material handling machine LH 110 C Litronic High Rise Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Material handling machine LH 110 C Litronic High Rise Operator’s Manual – PDF DOWNLOAD

Language : English
Pages :394
Downloadable : Yes
File Type : PDF
Size: 85.7 MB

DESCRIPTION:

Liebherr Material handling machine LH 110 C Litronic High Rise Operator’s Manual – PDF DOWNLOAD

Product ID
Manufacturer:Liebherr-Hydraulikbagger GmbH
Type:LH 11 O e Litronic High Rise
Type no.:1218
From Serial NO:79878

• Preface
• This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.

Examples of this work include:

• Operation, including setup and fitting attachments, elimination of malfunctions, care, disposal of lubricants and fuels.
• Service, including maintenance, inspection, and repair work.
• Transporting or loading the machine.

The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.

• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Liebherr Material handling machine LH 110 C Litronic High Rise Operator’s Manual – PDF DOWNLOAD

1 Product description 19
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 CO2 emissions of diesel engine 21
1.2.3 Sound level 23
1.2.4 Specifications 24
2 Safety warnings 25
2.1 lnformation on these instructions 25
2.1.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 lntended use 26
2.2.1 Laws, rules, guidelines and safety regulations 26
2.2.2 lntended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
2.2.5 Disposal 28
2.3 Description of staff 29
2.3.1 Personal protective equipment 29
2.3.7 Refrigeration technician 33
2.3.8 Slinger 33
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 79878 llEBHERR 9
Contents Operator’s manual
2.3.9 Spotter 34
2.4 Signs on the machine 35
2.4.1 Warning signs 35
2.4.2 lnformation signs 39
2.4.3 ldentification plate 44
2.5 Protective devices on the machine 44
2.5.1 Safety lever or folding console 44
2.5.2 Operator’s cab 44
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Roll over protective structure (ROPS) 45
2.5.5 Falling object protective structures (FOPS and FGPS) 46
2.6 Emergency equipment on the machine 46
2.6.1 Emergency exit (rescue system) 46
2.6.2 Fire extinguisher (option) 47
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 47
2.7 Safe operation 48
2.7.1 lntoxicants 48
2.7.2 Dangerous fuels and operating fluids 48
2.7.3 Transporting machine 48
2.7.4 Access to machine 49
2.7.5 Machine danger zone 50
2.7.6 Visibility 50
2.7.7 Protection against vibration 51
2.7.8 Operation of machine 52
2.7.9 Load-lifting work 54
2.8 Safework 55
2.8.1 Machine with turret 55
2.9.3 Regular checks …J 57
2.10 Modifications to the machine 57
2.10.1 Modifications, add-ons and retrofittings 57
copyright© Liebherr-Hydraulikbagger GmbH 2020
10 llEBHERR LH 11 o C Litronic – 1228 / 79878
Operator’s manual Contents
3 Control and operation 59
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 62
3.1.4 Further control units 62
3.1.5 Symbols on control description sticker 63
3.2 Display 71
3.2.1 Display 71
3.2.2 Status symbols 72
3.2.3 Start page menu 85
3.2.4 Camera menu 86
3.2.5 Air conditioning 88
3.2.6 Operating status menu 90
3.2.7 Diesel particulate filter submenu (option) 91
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 91
3.2.9 System settings menu 92
3.2.10 Operating hour meter and odometer submenu 93
3.2.11 Windscreen wiper interval submenu 94
3.2.12 Radio remete control submenu 94
3.2.13 Display settings submenu 95
3.2.14 Display brightness and display volume submenu 95
3.2.15 Camera image contrast submenu 96
3.2.16 Camera return time submenu 96
3.2.17 Regional settings and system parameters submenu 97
3.2.18 Unit selection submenu 98
3.2.19 System diagnosis submenu 98
I 3.2.24 Electrical inputs submenu 101 …J
3.2.25 Function settings menu 102
3.2.26 Central lubrication system submenu (option) 103
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 79878 llEBHERR 11
Contents Operator’s manual
3.2.27 Maintenance submenu 104
3.2.28 SF submenu 105
3.2.29 User profile submenu 108
3.2.30 Stick cylinder shut-off submenu (option) 108
3.2.31 Hoist cylinder shut-off submenu (option) 109
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 110
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 110
3.2.34 Workspace limitation submenu (option) 111
3.2.35 Automatic reversible fan drive submenu (option) 112
3.2.36 Comfort slewing brake submenu (option) 112
3.2.37 Bleeding hydraulic circuit submenu 113
3.2.38 lnformation menu 113
3.2.39 Operating time submenu 114
3.2.40 Fuel consumption submenu 115
3.2.41 Key assignment submenu 116
3.2.42 Tool Control menu 116
3.2.43 Service codes menu 117
3.3 Control 119
3.3.1 Battery main switch 119
3.3.2 Entering and exiting machine 120
3.3.3 Step lighting (option) 121
3.3.4 Emergency exit 121
3.3.5 Emergency exit – two-way adjustable operator’s cab LHC D-730
(option) 124
3.3.6 Fire extinguisher (option) 125
3.3.7 Folding console 125
3.3.8 Operator’s seat 127
3.3.9 Safety belt 134
3.3.10 Exit protection (option) 136 e:
3.3.15 Raising and lowering two-way adjustable cab (option) 141
3.3.16 Windscreen 144
copyright© Liebherr-Hydraulikbagger GmbH 2020
12 llEBHERR LH 11 o C Litronic – 1228 / 79878
Operator’s manual Contents
3.3.17 Sun blind 146
3.3.18 Viewing devices 147
3.3.19 Lighting 149
3.3.20 Cab lighting system 150
3.3.21 Beacon (option) 151
3.3.22 Windscreen wipers 152
3.3.23 Windscreen washer system 152
3.3.24 Auxiliary heater (option) 153
3.3.25 LiDAT (option) 153
3.4 Operation 154
3.4.1 lnspection tour before putting into service 154
3.4.2 Refuelling 155
3.4.3 Refuelling with electric refuelling pump (option) 156
3.4.4 Filling with diesel exhaust fluid 157
3.4.5 Preheating system for fuels and operating fluids (option) 159
3.4.6 lmmobiliser (option) 160
3.4.7 Preparing machine for dust intensive application 162
3.4.8 Preparing machine for use in biologically sensitive areas 162
3.4.9 Operator code (option) 162
3.4.10 Starting diesel engine 163
3.4.11 Bringing machine to operating temperature 164
3.4.12 Engine speed and operating mode 164
3.4.13 After starting 166
3.4.14 Sensor-controlled low idle automatic 167
3.4.15 Automatic engine stop after idling (option) 167
3.4.16 Shutting off diesel engine 168
3.4.17 Shutting off diesel engine in an emergency 169
3.4.18 Travelling and braking 169
3.4.24 Positioning slewing brake 180
3.4.25 Hoist cylinder pressure warning device (option) 181
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 79878 llEBHERR 13
Contents Operator’s manual
3.4.26 Lowering boom actively (option) 181
3.4.27 Selecting the working tool 181
3.4.28 Controlling special working attachment with mini-joystick 182
3.4.29 Changing over contrai of right mini-joystick (option) 183
3.4.30 Grapple priority (option) 184
3.4.31 AutoLift (Option) 185
3.4.32 Magnet system (option) 185
3.4.33 Reversible fan drive for radiator cleaning (option) 187
3.5 Shut-off functions 190
3.5.1 Stick cylinder shut-off (option) 190
3.5.2 Hoist cylinder shut-off (option) 193
3.5.3 Height limitation 197
3.5.4 Depth limitation (option) 207
3.5.5 Overload warning system (option) 215
3.5.6 Load moment limitation (option) 216
3.6 General working methods 222
3.6.1 Working without damaging the machine 222
3.6.2 Putting machine in working position 223
3.6.3 Travelling at operating location 224
3.6.4 Travelling on inclination 225
3.6.5 Travelling under obstacles 225
3.6.6 Handling loads 226
3.6.7 Loading transport vehicle 226
3.6.8 Lifting loads 227
3.6.9 Use of banksmen 228
3.6.10 Working in windy conditions 228
3.7 lnstalling and removing working attachment 230
3.7.1 Using quick coupler 230
3.10 Emergency operation 236 …J
3.10.1 Jump starting 236
3.10.2 Lowering working attachment when engine is shut off 237
copyright© Liebherr-Hydraulikbagger GmbH 2020
14 llEBHERR LH 11 o C Litronic – 1228 / 79878
Operator’s manual Contents
3.10.3 Lowering operator’s cab in an emergency (option) 237
3.10.4 Lowering two-way adjustable cab in an emergency (option) 239
3.10.5 Towing the machine 240
4 Malfunctions 241
4.1 Service code tables 241
4.1.1 Warning symbols 241
4.2 Fault – Cause – Remedy 248
4.2.1 Diesel engine and fuel system 248
4.2.2 Hydraulic system 251
4.2.3 Travei gear 252
4.2.4 Electrical system 252
4.2.5 Heating, ventilation and air conditioning unit 252
4.2.6 Working attachment 253
4.3 Problem remedy 254
4.3.1 Fuses and relays in the uppercarriage 254
4.3.2 Operator’s platform fuses and relays 260
5 Maintenance 267
5.1 lnspection and maintenance schedule 267
5.2 Filling quantities and lubrication chart 273
5.2.1 Lubrication chart 273
5.3 Fuels, lubricants and operating fluids 277
5.3.1 General information about lubricants and fuels 277
5.3.2 Diesel fuels 277
5.3.3 Diesel exhaust fluids 278
5.3.4 Engine oils 279
5.3.5 Refrigerant 280
5.3.11 Greases 286
5.3.12 Windscreen washer fluid 287
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 79878 llEBHERR 15
Contents Operator’s manual
5.3.13 Lubricants and care products for electrical and mechanical systems 287
5.4 Access points for maintenance work 288
5.4.1 Access points on uppercarriage 288
5.4.2 Access points under the uppercarriage 289
5.4.3 Access points on undercarriage 290
5.5 Preparing for maintenance 291
5.5.1 Maintenance procedures 291
5.5.2 Preparing for maintenance 292
5.5.3 Putting machine in maintenance position 294
5.6 General maintenance 295
5.6.1 Welding 295
5.6.2 Corrosion-proofing piston rods 295
5.6.3 Cleaning the machine 296
5.6.4 Cleaning travei gear 297
5.6.5 Cleaning fan and radiator 298
5.7 Complete machine 299
5.7.1 Lubricating bearings on machine and working attachment 299
5.7.2 Checking components for cracks 301
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 302
5.7.4 Checking rescue system (option) 302
5.8 Drive group 304
5.8.1 Diesel engine: Bringing into maintenance position 304
5.8.2 Diesel engine: Checking oil level 304
5.8.3 Fuel pre-filter: Draining water 305
5.8.4 Fuel tank: Draining water and sediments 306
5.8.5 Air filter: Emptying dust collecting tank 308
5.8.6 Air filter: Replacing main filter cartridge 309
5.8.7 Air filter: Replacing safety filter cartridge 311 e:
5.10.1 Depressurising hydraulic system 325
5.10.2 Hydraulic tank: Checking oil level 325
5.10.3 Hydraulic tank: Draining water and sediments 328
5.10.4 Return filter: Checking and cleaning magnetic rod 330
5.10.5 Return leakage oil filter: Replacing filter cartridge 331
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge 332
5.11 Electrical system 333
5.11.1 General information 333
5.12 Travei gear
5.12.1 Checking track tension
5.12.2 Tightening track
5.12.3 Slackening track
5.12.4 Determining track type
5.13 Working attachment
5.13.1 Lubricating working tool
5.13.2 Checking pin bearings for wear
5.14 Operator’s cab, heating and air conditioning
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
5.14.5 Checking and cleaning condenser
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
Appendix
lndex

 Customer Support: [email protected]

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M