Liebherr Material handling machine LH 110Ce Litronic Operator’s Manual – PDF DOWNLOAD

Description

Liebherr Material handling machine LH 110Ce Litronic Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Material handling machine LH 110Ce Litronic Operator’s Manual – PDF DOWNLOAD

Language : English
Pages :394 
Downloadable : Yes
File Type : PDF
Size: 85.8 MB

DESCRIPTION:

Product ID
Manufacturer:Liebherr-Hydraulikbagger GmbH
Type:LHLH 110 C Litronic
Type no.:1228
From Serial NO:102573

Liebherr Material handling machine LH 110Ce Litronic Operator’s Manual – PDF DOWNLOAD

Preface

• This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.

Examples of this work include:

• Operation, including setup and fitting attachments, elimination of malfunctions, care, disposal of lubricants and fuels.
• Service, including maintenance, inspection, and repair work.
• Transporting or loading the machine.
• The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.
• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Liebherr Material handling machine LH 110Ce Litronic Operator’s Manual – PDF DOWNLOAD

1 Product description 19
1.1 Technical description 19
1.1.1 General overview 19
1.1.2 Uppercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 CO2 emissions of diesel engine 21
1.2.3 Sound level 23
1.2.4 Specifications 24
2 Safety warnings 25
2.1 lnformation on these instructions 25
2.1.1 Representation of warning messages 25
2.1.2 Graphic symbols in these instructions 25
2.2 lntended use 26
2.2.1 Laws, rules, guidelines and safety regulations 26
2.2.2 lntended use 26
2.2.3 Foreseeable misuse 27
2.2.4 Operating conditions 27
2.2.5 Disposal 28
2.3 Description of staff 29
2.3.1 Personal protective equipment 29
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 102573 llEBHERR 9
Contents Operator’s manual
2.3.9 Spotter 34
2.4 Signs on the machine 35
2.4.1 Warning signs 35
2.4.2 lnformation signs 39
2.4.3 ldentification plate 44
2.5 Protective devices on the machine 44
2.5.1 Safety lever or folding console 44
2.5.2 Operator’s cab 44
2.5.3 Height-adjustable operator’s cab 45
2.5.4 Roll over protective structure (ROPS) 45
2.5.5 Falling object protective structures (FOPS and FGPS) 46
2.6 Emergency equipment on the machine 46
2.6.1 Emergency exit (standard) 46
2.6.2 Fire extinguisher (option) 46
2.6.3 Emergency command devices of machine 47
2.6.4 Emergency stop function of machine 47
2.7 Safe operation 47
2.7.1 lntoxicants 47
2.7.2 Dangerous fuels and operating fluids 48
2.7.3 Transporting machine 48
2.7.4 Access to machine 49
2.7.5 Machine danger zone 50
2.7.6 Visibility 50
2.7.7 Protection against vibration 51
2.7.8 Operation of machine 52
2.7.9 Load-lifting work 54
2.8 Safework 55
2.8.1 Machines with height adjustable cab 55″
I
2.10 Modifications to the machine 56 …J
2.10.1 Modifications, add-ons and retrofittings 56
copyright© Liebherr-Hydraulikbagger GmbH 2020
10 llEBHERR LH 11 o C Litronic – 1228 / 102573
Operator’s manual Contents
3 Control and operation 59
3.1 Control and operating elements 59
3.1.1 Overview of operator’s platform 59
3.1.2 Control unit A 61
3.1.3 Control unit B 62
3.1.4 Further control units 62
3.1.5 Symbols on control description sticker 63
3.2 Display 71
3.2.1 Display 71
3.2.2 Status symbols 72
3.2.3 Start page menu 85
3.2.4 Camera menu 86
3.2.5 Air conditioning 87
3.2.6 Operating status menu 89
3.2.7 Diesel particulate filter submenu (option) 90
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 91
3.2.9 System settings menu 92
3.2.10 Operating hour meter and odometer submenu 93
3.2.11 Windscreen wiper interval submenu 93
3.2.12 Radio remete control submenu 94
3.2.13 Display settings submenu 95
3.2.14 Display brightness and display volume submenu 95
3.2.15 Camera image contrast submenu 96
3.2.16 Camera return time submenu 96
3.2.17 Regional settings and system parameters submenu 97
3.2.18 Unit selection submenu 97
3.2.19 System diagnosis submenu 98
“”” 3.2.23 Electrical outputs submenu 100 “”” 1″i’i
I 3.2.24 Electrical inputs submenu 101 …J
3.2.25 Function settings menu 101
3.2.26 Central lubrication system submenu (option) 103
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 102573 llEBHERR 11
Contents Operator’s manual
3.2.27 Maintenance submenu 103
3.2.28 SF submenu 105
3.2.29 User profile submenu 107
3.2.30 Stick cylinder shut-off submenu (option) 108
3.2.31 Hoist cylinder shut-off submenu (option) 108
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 109
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 110
3.2.34 Workspace limitation submenu (option) 110
3.2.35 Automatic reversible fan drive submenu (option) 111
3.2.36 Comfort slewing brake submenu (option) 112
3.2.37 Bleeding hydraulic circuit submenu 112
3.2.38 lnformation menu 113
3.2.39 Operating time submenu 114
3.2.40 Fuel consumption submenu 114
3.2.41 Key assignment submenu 115
3.2.42 Tool Control menu 115
3.2.43 Service codes menu 116
3.3 Control 118
3.3.1 Battery main switch 118
3.3.2 Entering and exiting machine 119
3.3.3 Step lighting (option) 120
3.3.4 Emergency exit 121
3.3.5 Fire extinguisher (option) 121
3.3.6 Folding console 122
3.3.7 Operator’s seat 123
3.3.8 Safety belt 131
3.3.9 Exit protection (option) 132
3.3.10 lgnition key 133
3.3.15 Sun blind 140 …J
3.3.16 Viewing devices 141
3.3.17 Lighting 143
copyright© Liebherr-Hydraulikbagger GmbH 2020
12 llEBHERR LH 11 o C Litronic – 1228 / 102573
Operator’s manual Contents
3.3.18 Cab lighting system 144
3.3.19 Beacon (option) 145
3.3.20 Windscreen wipers 146
3.3.21 Windscreen washer system 146
3.3.22 Auxiliary heater (option) 147
3.3.23 LiDAT (option) 147
3.4 Operation 148
3.4.1 lnspection tour before putting into service 148
3.4.2 Refuelling 149
3.4.3 Refuelling with electric refuelling pump (option) 149
3.4.4 Filling with diesel exhaust fluid 151
3.4.5 Preheating system for fuels and operating fluids (option) 152
3.4.6 lmmobiliser (option) 154
3.4.7 Preparing machine for dust intensive application 155
3.4.8 Preparing machine for use in biologically sensitive areas 156
3.4.9 Operator code (option) 156
3.4.10 Starting diesel engine 157
3.4.11 Bringing machine to operating temperature 158
3.4.12 Engine speed and operating mode 158
3.4.13 After starting 160
3.4.14 Sensor-controlled low idle automatic 161
3.4.15 Automatic engine stop after idling (option) 161
3.4.16 Shutting off diesel engine 162
3.4.17 Shutting off diesel engine in an emergency 162
3.4.18 Travelling and braking 163
3.4.19 Travei alarm (option) 166
3.4.20 Controlling working attachment 166
3.4.21 Turning and braking uppercarriage 167
…J 3.4.26 Selecting the working tool 174
3.4.27 Controlling special working attachment with mini-joystick 174
3.4.28 Changing over contrai of right mini-joystick (option) 175
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 102573 llEBHERR 13
Contents Operator’s manual
3.4.29 Grapple priority (option) 176
3.4.30 Autolift (Option) 177
3.4.31 Magnet system (option) 178
3.4.32 Reversible fan drive for radiator cleaning (option) 179
3.5 Shut-off functions 182
3.5.1 Stick cylinder shut-off (option) 182
3.5.2 Hoist cylinder shut-off (option) 185
3.5.3 Height limitation 189
3.5.4 Depth limitation (option) 199
3.5.5 Overload warning system (option) 207
3.5.6 Load moment limitation (option) 208
3.6 General working methods 214
3.6.1 Working without damaging the machine 214
3.6.2 Putting machine in working position 215
3.6.3 Travelling at operating location 216
3.6.4 Travelling with load at operating location 217
3.6.5 Travelling under obstacles 218
3.6.6 Handling loads 218
3.6.7 Loading transport vehicle 219
3.6.8 Lifting loads 219
3.6.9 Use of banksmen 220
3.6.10 Working in windy conditions 220
3.7 lnstalling and removing working attachment 222
3.7.1 Using quick coupler 222
3.7.2 lnstalling and removing grapple on industrial stick 222
3.7.3 lnstalling and removing boom 225
3.8 Parking machine 226
3.9 Transport and assembly 227
3.11 Emergency operation 232
3.11.1 Jump starting 232
copyright© Liebherr-Hydraulikbagger GmbH 2020
14 llEBHERR LH 11 o C Litronic – 1228 / 102573
Operator’s manual Contents
3.11.2 Lowering working attachment when engine is shut off 233
3.11.3 Lowering operator’s cab in an emergency (option) 233
3.11.4 Towing the machine 234
4 Malfunctions 235
4.1 Service code tables 235
4.1.1 Warning symbols 235
4.2 Fault – Cause – Remedy 242
4.2.1 Diesel engine and fuel system 242
4.2.2 Hydraulic system 245
4.2.3 Travei gear 246
4.2.4 Electrical system 246
4.2.5 Heating, ventilation and air conditioning unit 246
4.2.6 Working attachment 247
4.3 Problem remedy 248
4.3.1 Fuses and relays in the uppercarriage 248
4.3.2 Operator’s platform fuses and relays 254
5 Maintenance 261
5.1 lnspection and maintenance schedule 261
5.2 Filling quantities and lubrication chart 267
5.2.1 Filling quantities 267
5.2.2 Lubrication chart 269
5.3 Fuels, lubricants and operating fluids 273
5.3.1 General information about lubricants and fuels 273
5.3.2 Diesel fuels 273
5.3.3 Diesel exhaust fluids 274
5.3.4 Engine oils 275
5.3.10 Energy recuperation cylinder oils 282
5.3.11 Greases 282
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 11 o C Litronic – 1228 / 102573 llEBHERR 15
Contents Operator’s manual
5.3.12 Windscreen washer fluid 283
5.3.13 Lubricants and care products for electrical and mechanical systems 283
5.4 Access points for maintenance work 284
5.4.1 Access points on uppercarriage 284
5.4.2 Access points under the uppercarriage 285
5.4.3 Access points on undercarriage 286
5.5 Preparing for maintenance 287
5.5.1 Maintenance procedures 287
5.5.2 Preparing for maintenance 288
5.5.3 Putting machine in maintenance position 290
5.6 General maintenance 291
5.6.1 Welding 291
5.6.2 Corrosion-proofing piston rods 291
5.6.3 Cleaning the machine 292
5.6.4 Cleaning travei gear 293
5.6.5 Cleaning fan and radiator 294
5.7 Complete machine 295
5.7.1 Lubricating bearings on machine and working attachment 295
5.7.2 Checking components for cracks 297
5.7.3 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 298
5.7.4 Checking rescue system (option) 298
5.8 Drive group 300
5.8.1 Diesel engine: Bringing into maintenance position 300
5.8.2 Diesel engine: Checking oil level 300
5.8.3 Fuel pre-filter: Draining water 301
5.8.4 Fuel tank: Draining water and sediments 302
5.8.5 Air filter: Emptying dust collecting tank 304
5.8.6 Air filter: Replacing main filter cartridge 305 e:
5.10 Working hydraulics 321
5.10.1 Depressurising hydraulic system 321
5.10.2 Hydraulic tank: Checking oil level 321
5.10.3 Hydraulic tank: Draining water and sediments 324
5.10.4 Return filter: Checking and cleaning magnetic rod 326
5.10.5 Return leakage oil filter: Replacing filter cartridge 327
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge 328
5.11 Electrical system 329
5.11.1 General information 329
5.12 Travei gear 330
5.12.1 Checking track tension 330
5.12.2 Tightening track 331
5.12.3 Slackening track 332
5.12.4 Determining track type 333
5.13 Working attachment 334
5.13.1 Lubricating working tool 334
5.13.2 Checking pin bearings for wear 334
5.14 Operator’s cab, heating and air conditioning 335
5.14.1 Filling with windscreen washer fluid 335
5.14.2 Heating: Checking function 335
5.14.3 Auxiliary heater (option): Checking function 337
5.14.4 Switching on air conditioning unit 337
5.14.5 Checking and cleaning condensar 338
5.15 Lubrication system 340
5.15.1 Lubrication system: Filling with grease 340
5.15.2 Checking lubrication of bearings (grease collar) 341
5.16 Slewing gearbox and slewing ring 342

 Contact us: [email protected]

https://vimeo.com/824316738?share=copy

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M