Liebherr Material handling machine LH 60 M Litronic Operator’s Manual – PDF DOWNLOAD

Description

Liebherr Material handling machine LH 60 M Litronic Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Material handling machine LH 60 M Litronic Operator’s Manual – PDF DOWNLOAD

Language : English
Pages :396
Downloadable : Yes
File Type : PDF
Size: 83.4 MB

DESCRIPTION:

Product 1D
Manufacturer:Liebherr-Hydraulikbagger GmbH
Type: LH 60 M Litronic
Type no.:1217 (USA/ CAN)
From Serial no.:71365

Liebherr Material handling machine LH 60 M Litronic Operator’s Manual – PDF DOWNLOAD

Preface

• This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.
• Examples of this work include:
• Operation, including setup and fitting attachments, elimination of malfunctions, care, disposal of lubricants and fuels.
• Service, including maintenance, inspection, and repair work.
• Transporting or loading the machine.
• The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.
• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:
Liebherr Material handling machine LH 60 M Litronic Operator’s Manual – PDF DOWNLOAD

Product description 17
1.1 Technical description 17
1.1.1 General overview 17
1.2 Technical data 19
1.2.1 Vibration emission 19
1.2.2 CO2 emissions of diesel engine 19
1.2.3 Sound level 21
1.2.4 Specifications 22
1.3 Warranty conditions 23
1.3.1 Additional information, USA 23
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 23
1.3.3 Warranty coverage from manufacturer
1.3.4 Warranty obligations of the owner
1.3.5 Warranty
1.3.6 Warranty parts
1.3.7 Exclusions
2 Safety warnings
2.1 lnformation on these instructions
2.1.1 Representation of warning messages
2.1.2 Graphic symbols in these instructions
2.2 lntended use
2.2.1 Laws, rules, guidelines and safety regulations
2.2.2 lntended use
2.2.3 Foreseeable misuse
2.2.4 Operating conditions
2.2.5 Disposal
2.3 Description of staff
2.3.1 Personal protective equipment
2.3.2 Requirements for staff 31
2.3.3 Operating company 32
2.3.4 Operator 32
2.3.5 Maintenance staff 33
2.3.6 Electrical engineer 34
2.3.7 Refrigeration technician 35
2.3.8 Slinger 35
2.3.9 Spotter 36
Signs on the machine 37
2.4.1 Location of signs 37
2.4.2 Safety signs and information signs (USA) 40
2.4.3 ldentification tag (USA) 51
Protective devices on the machine 51
2.5.1 Safety lever or folding console 51
2.5.2 Operator’s cab 52
2.5.3 Height-adjustable operator’s cab 52
2.5.4 Roll over protective structure (ROPS) 53
2.5.5 Falling object protective structures (FOPS and FGPS) 53
Emergency equipment on the machine
2.6.1 Emergency exit (standard)
2.6.2 Fire extinguisher (option)
2.6.3 Emergency command devices of machine
2.6.4 Emergency stop function of machine
Safe operation
2.7.1 lntoxicants
2.7.2 Dangerous fuels and operating fluids
2.7.3 Transporting machine
2.7.4 Access to machine
2.7.5 Machine danger zone
2.7.6 Visibility
2.7.7 Protection against vibration
2.7.8 Operation of machine
2.7.9 Load-lifting work
2.9 Safe maintenance
2.9.1 Spare parts
2.9.2 Heavy parts
2.9.3 Regular checks
2.10 Modifications to the machine
2.10.1 Modifications, add-ons and retrofittings
3 Control and operation
3.1 Contrai and operating elements
3.1.1 Overview of operator’s platform
3.1.2 Contrai unit A
3.1.3 Contrai unit B
3.1.4 Further contrai units
3.1.5 Symbols on contrai description sticker
3.2 Display
3.2.1 Display
3.2.2 Status symbols
3.2.3 Start page menu
3.2.4 Camera menu
3.2.5 Air conditioning
3.2.6 Operating status menu
3.2.7 Diesel particulate filter submenu (option)
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option)
3.2.9 System settings menu
3.2.10 Operating hour meter and odometer submenu
3.2.11 Windscreen wiper interval submenu
3.2.12 Radio remate contrai submenu
3.2.13 Display settings submenu
3.2.14 Display brightness and display volume submenu
3.2.15 Camera image contrast submenu
3.2.16 Camera return time submenu
3.2.17 Regional settings and system parameters submenu
3.2.18 Unit selection submenu
3.2.19 System diagnosis submenu
3.2.20 Time zone submenu 104
3.2.21 Time format and date format submenu 105
3.2.22 Language selection submenu 105
3.2.23 Electrical outputs submenu 106
3.2.24 Electrical inputs submenu 107
3.2.25 Function settings menu 107
3.2.26 Central lubrication system submenu (option) 109
3.2.27 Maintenance submenu 109
3.2.28 SF submenu 111
3.2.29 User profile submenu 113
3.2.30 Stick cylinder shut-off submenu (option) 114
3.2.31 Hoist cylinder shut-off submenu (option) 114
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 115
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 116
3.2.34 Workspace limitation submenu (option) 116
3.2.35 Automatic reversible fan drive submenu (option) 117
3.2.36 Comfort slewing brake submenu (option) 118
3.2.37 Bleeding hydraulic circuit submenu 118
3.2.38 lnformation menu 119
3.2.39 Operating time submenu 120
3.2.40 Fuel consumption submenu 120
3.2.41 Key assignment submenu 121
3.2.42 Tool Control menu 121
3.2.43 Service cedes menu 122
3.3 Control 124
3.3.1 Battery main switch 124
3.3.2 Entering and exiting machine 125
3.3.3 Step lighting (option) 126
3.3.4 Emergency exit 127
3.3.5 Fire extinguisher (option) 127
3.3.6 Folding console 128
3.3.7 Operator’s seat 129
3.3.8 Safety belt 137
3.3.9 Exit protection (option) 138
3.3.10 Steering wheel 139
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 60 M Litronic – 1217 (USA/ CAN) 10 llEBHERR /71365
Operator’s manual Contents
3.3.11 lgnition key 139
3.3.12 Confirmation button 140
3.3.13 Horn 141
3.3.14 Raising and lowering operator’s cab (option) 142
3.3.15 Windscreen 144
3.3.16 Sun blind 146
3.3.17 Viewing devices 147
3.3.18 Lighting 149
3.3.19 Cab lighting system 150
3.3.20 Beacon (option) 151
3.3.21 Windscreen wipers 152
3.3.22 Windscreen washer system 152
3.3.23 Auxiliary heater (option) 153
3.3.24 LiDAT (option) 153
3.4 Operation 154
3.4.1 lnspection tour before putting into service 154
3.4.2 Refuelling 155
3.4.3 Refuelling with electric refuelling pump (option) 155
3.4.4 Filling with diesel exhaust fluid 157
3.4.5 Preheating system for fuels and operating fluids (option) 158
3.4.6 lmmobiliser (option) 160
3.4.7 Preparing machine for dust intensive application 161
3.4.8 Preparing machine for use in biologically sensitive areas 162
3.4.9 Operator code (option) 162
3.4.10 Starting diesel engine 163
3.4.11 Bringing machine to operating temperature 164
3.4.12 Engine speed and operating mode 164
3.4.13 After starting 166
3.4.14 Sensor-controlled low idle automatic 167
3.4.15 Automatic engine stop after idling (option) 167
3.4.16 Shutting off diesel engine 168
3.4.17 Shutting off diesel engine in an emergency 168
3.4.18 Travelling and braking 169
3.4.19 Joystick steering 172
3.4.20 Travei alarm (option) 173
3.4.21 Locking and unlocking oscillating axle 174
3.4.22 Supporting machine 175
3.4.23 Controlling working attachment 178
3.4.24 Turning and braking uppercarriage 179
3.4.25 Slewing brake 179
3.4.26 Positioning slewing brake 184
3.4.27 Hoist cylinder pressure warning device (option) 185
3.4.28 Lowering boom actively (option) 185
3.4.29 Selecting the working tool 185
3.4.30 Controlling special working attachment with mini-joystick 186
3.4.31 Changing over contrai of right mini-joystick (option) 187
3.4.32 Grapple priority (option) 188
3.4.33 AutoLift (Option) 189
3.4.34 Magnet system (option) 189
3.4.35 Reversible fan drive for radiator cleaning (option) 191
Shut-off functions 194
3.5.1 Stick cylinder shut-off (option) 194
3.5.2 Hoist cylinder shut-off (option) 197
3.5.3 Height limitation 201
3.5.4 Depth limitation (option) 211
3.5.5 Overload warning system (option) 219
3.5.6 Load moment limitation (option) 221
General working methods 227
3.6.1 Working without damaging the machine 227
3.6.2 Putting machine in working position 228
3.6.3 Travelling at operating location 229
3.6.4 Travelling with load at operating location 230
3.6.5 Travelling under obstacles 231
3.6.6 Handling loads 232
3.6.7 Loading transport vehicle 232
3.6.8 Lifting loads 233
3.6.9 Use of banksmen 234
lnstalling and removing working attachment 241
3.7.1 Using quick coupler 241
3.7.2 lnstalling and removing grapple on industrial stick 241
3.7.3 lnstalling and removing boom
3.8 Parking machine
3.9 Transport
3.9.1 Preparatory work
3.9.2 Driving machine onto low-loader
3.9.3 Tying down machine
3.9.4 After transport
3.10 Emergency operation
3.10.1 Jump starting
3.10.2 Lowering working attachment when engine is shut off
3.10.3 Lowering operator’s cab in an emergency (option)
3.10.4 Towing the machine
4 Malfunctions
4.1 Service code tables
4.1.1 Warning symbols
4.2 Fault – Cause – Remedy
4.2.1 Diesel engine and fuel system
4.2.2 Hydraulic system
4.2.3 Electrical system
4.2.4 Heating, ventilation and air conditioning unit
4.2.5 Working attachment
4.3 Problem remedy
4.3.1 Fuses and relays in the uppercarriage
4.3.2 Operator’s platform fuses and relays
5 Maintenance
5.1 lnspection and maintenance schedule
5.2 Filling quantities and lubrication chart
5.2.1 Filling quantities
5.2.2 Lubrication chart
5.3 Fuels, lubricants and operating fluids
5.3.1 General information about lubricants and fuels
5.3.2 Diesel fuels
5.3.3 Diesel exhaust fluids
Operator’s manual
5.3.4 Engine oils 293
5.3.5 Refrigerant 294
5.3.6 Coolant 295
5.3.7 Hydraulic oils 296
5.3.8 Axle oils 298
5.3.9 Gearoils 299
5.3.10 Transmission oils 299
5.3.11 Pump distributor gear oils 300
5.3.12 Energy recuperation cylinder oils 301
5.3.13 Greases 301
5.3.14 Windscreen washer fluid 302
5.3.15 Lubricants and care products for electrical and mechanical systems 302
Access points for maintenance work 303
5.4.1 Access points on uppercarriage 303
5.4.2 Access points under the uppercarriage 305
Preparing for maintenance 306
5.5.1 Maintenance procedures 306
5.5.2 Preparing for maintenance 307
5.5.3 Putting machine in maintenance position 309
General maintenance 310
5.6.1 Welding 310
5.6.2 Corrosion-proofing piston rods 310
5.6.3 Cleaning the machine 311
5.6.4 Cleaning fan and radiator 313
Complete machine 314
5.7.1 Checking machine for proper condition and tightness 314
5.7.2 Lubricating bearings on machine and working attachment 318
5.7.3 Checking components for cracks 320
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 321
5.7.5 Checking rescue system (option) 321
Drive group 323
5.8.1 Diesel engine: Bringing into maintenance position 323
5.8.2 Diesel engine: Checking oil level 323
5.8.3 Fuel pre-filter: Draining water 324
5.8.4 Fuel tank: Draining water and sediments
5.8.5 Air filter: Emptying dust collecting tank
5.8.6 Air filter: Replacing main filter cartridge
5.8.7 Air filter: Replacing safety filter cartridge
5.8.8 Pump distributor gear: Checking oil level
5.8.9 Diesel particulate filter: Activating and deactivating regeneration
5.9 Cooling system
5.9.1 Checking coolant level
5.9.2 Checking cooling system and heat exchanger for contamination
5.10 Working hydraulics
5.10.1 Depressurising hydraulic system
5.10.2 Hydraulic tank: Checking oil level
5.10.3 Hydraulic tank: Draining water and sediments
5.10.4 Return filter: Checking and cleaning magnetic rod
5.10.5 Return leakage oil filter: Replacing filter cartridge
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge
5.11 Electrical system
5.11.1 General information
5.12 Axles
5.12.1 Lubricating axles
5.12.2 Tyres: checking foam-filled tyres
5.12.3 Wheels: Checking mounting of wheel nuts
5.13 Working attachment
5.13.1 Lubricating working tool
5.13.2 Checking pin bearings for wear
5.14 Operator’s cab, heating and air conditioning
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
5.14.5 Checking and cleaning air conditioning condenser
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
6 Appendix
lndex

 Contact us: [email protected]

https://vimeo.com/824312113?share=copy

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M