Liebherr Material handling machine LH 80 C Litronic Operator’s Manual 76315 – PDF DOWNLOAD

Description

Liebherr Material handling machine LH 80 C Litronic Operator’s Manual 76315 – PDF DOWNLOAD

FILE DETAILS:

Liebherr Material handling machine LH 80 C Litronic Operator’s Manual – PDF DOWNLOAD

Language : English
Pages :412
Downloadable : Yes
File Type : PDF
Size: 88.3 MB

DESCRIPTION:

Liebherr Material handling machine LH 80 C Litronic Operator’s Manual – PDF DOWNLOAD

Product ID
Manufacturer:Liebherr-Hydraulikbagger GmbH
Type:LH 80 e Litronic
Type no :1529 (USA / CAN)
From Serial NO:76315

Preface

This operator’s manual is intended for you as the operator or maintenance staff. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid malfunctions caused by incorrect operation. Compliance with the operator’s manual increases the reliability and service life of the machine.

• The operator’s manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace. Read the operator’s manual before putting it into service for the first time and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operator’s manual.
• Examples of this work include:
• Operation, including setup and fitting attachments, elimination of malfunctions, care, disposal of lubricants and fuels.
• Service, including maintenance, inspection, and repair work.
• Transporting or loading the machine.
• The owner is responsible for supplementing the operator’s manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operator’s manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognized technical rules on safety and technically proficient working.
• Some sections of this operator’s manual do not apply to all machines. Some illustrations in this operator’s manual may show details and implements that are different from your machine. In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous improvement, which may result in changes to your machine that are not referred to in this operator’s manual yet. If you require further explanations or information, please contact Liebherr customer service. All documentation purchased for this machine, including the operator’s manual, maintenance manual, spare parts catalog, etc., is available from MyLiebherr for the entire service life of the machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Liebherr Material handling machine LH 80 C Litronic Operator’s Manual – PDF DOWNLOAD

1 Product description 17
1.1 Technical description 18
1.1.1 General overview 18
1.1.2 Uppercarriage 19
1.1.3 Undercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 CO2 emissions of diesel engine 21
1.2.3 Sound level 23
1.2.4 Specifications 24
1.3 Warranty conditions 25
1.3.1 Additional information, USA 25
1.3.2 Warranty declaration, emission limits, warranty rights and obligations 25
1.3.3 Warranty coverage from manufacturer
1.3.4 Warranty obligations of the owner
1.3.5 Warranty
1.3.6 Warranty parts
1.3.7 Exclusions
2 Safety warnings
2.1 lnformation on these instructions
2.1.1 Representation of warning messages
2.1.2 Graphic symbols in these instructions
2.2 lntended use
2.2.1 Laws, rules, guidelines and safety regulations
2.2.2 lntended use
2.2.3 Foreseeable misuse
2.2.4 Operating conditions
2.2.5 Disposal
Contents Operator’s manual
2.3 Description of staff 33
2.3.1 Personal protective equipment 33
2.3.2 Requirements for staff 33
2.3.3 Operating company 34
2.3.4 Operator 34
2.3.5 Maintenance staff 35
2.3.6 Electrical engineer 36
2.3.7 Refrigeration technician 37
2.3.8 Slinger 37
2.3.9 Spotter 38
2.4 Signs on the machine 39
2.4.1 Safety signs (USA) 39
2.4.2 lnformation signs 42
2.4.3 ldentification tag (USA) 46
2.5 Protective devices on the machine 46
2.5.1 Safety lever or folding console 46
2.5.2 Operator’s cab 47
2.5.3 Height-adjustable operator’s cab 47
2.5.4 Roll over protective structure (ROPS) 48
2.5.5 Falling object protective structures (FOPS and FGPS) 48
2.6 Emergency equipment on the machine 49
2.6.1 Emergency exit (standard) 49
2.6.2 Fire extinguisher (option) 49
2.6.3 Emergency command devices of machine 49
2.6.4 Emergency stop function of machine 50
2.7 Safe operation 50
2.7.1 lntoxicants 50
2.7.2 Dangerous fuels and operating fluids 50
2.7.3 Transporting machine 51
2.7.4 Access to machine 51
2.7.5 Machine danger zone 52
2.7.6 Visibility 52
2.7.7 Protection against vibration 53
2.7.8 Operation of machine 54
2.7.9 Load-lifting work 57
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 80 C Litronic – 1529 (USA / CAN)
8 llEBHERR /76315
Operator’s manual
2.8 Safework
2.8.1 Machines with height adjustable cab
2.9 Safe maintenance
2.9.1 Spare parts
2.9.2 Heavy parts
2.9.3 Regular checks
2.10 Modifications to the machine
2.10.1 Modifications, add-ons and retrofittings
3 Control and operation
3.1 Contrai and operating elements
3.1.1 Overview of operator’s platform
3.1.2 Contrai unit A
3.1.3 Contrai unit B
3.1.4 Further contrai units
3.1.5 Symbols on contrai description sticker
3.2 Display
3.2.1 Display
3.2.2 Status symbols
3.2.3 Start page menu
3.2.4 Camera menu
3.2.5 Air conditioning
3.2.6 Operating status menu
3.2.7 Diesel particulate filter submenu (option)
3.2.8 Sensor-controlled low idle automatic and automatic engine stop
submenu (option)
3.2.9 System settings menu
3.2.10 Operating hour meter and odometer submenu
3.2.11 Windscreen wiper interval submenu
3.2.12 Radio remate contrai submenu
3.2.13 Display settings submenu
3.2.14 Display brightness and display volume submenu
3.2.15 Camera image contrast submenu
3.2.16 Camera return time submenu
3.2.17 Regional settings and system parameters submenu
Contents Operator’s manual
3.2.18 Unit selection submenu 99
3.2.19 System diagnosis submenu 100
3.2.20 Time zone submenu 100
3.2.21 Time format and date format submenu 101
3.2.22 Language selection submenu 101
3.2.23 Electrical outputs submenu 102
3.2.24 Electrical inputs submenu 103
3.2.25 Function settings menu 103
3.2.26 Central lubrication system submenu (option) 105
3.2.27 Maintenance submenu 105
3.2.28 SF submenu 107
3.2.29 User profile submenu 109
3.2.30 Stick cylinder shut-off submenu (option) 110
3.2.31 Hoist cylinder shut-off submenu (option) 110
3.2.32 Stick cylinder shut-off and hoist cylinder shut-off submenu (option) 111
3.2.33 Stick cylinder speed and hoist cylinder speed submenu (option) 112
3.2.34 Workspace limitation submenu (option) 112
3.2.35 Automatic reversible fan drive submenu (option) 113
3.2.36 Comfort slewing brake submenu (option) 114
3.2.37 Bleeding hydraulic circuit submenu 114
3.2.38 lnformation menu 115
3.2.39 Operating time submenu 116
3.2.40 Fuel consumption submenu 116
3.2.41 Key assignment submenu 117
3.2.42 Tool Contrai menu 117
3.2.43 Service codes menu 118
3.3 Contrai 120
3.3.1 Battery main switch 120
3.3.2 Entering and exiting machine 121
3.3.3 Step lighting (option) 122
3.3.4 Emergency exit 123
3.3.5 Fire extinguisher (option) 123
3.3.6 Folding console 124
3.3.7 Operator’s seat 125
3.3.8 Safety belt 133
copyright© Liebherr-Hydraulikbagger GmbH 2020
LH 80 C Litronic – 1529 (USA / CAN) 10 llEBHERR /76315
Operator’s manual Contents
3.3.9 Exit protection (option) 134
3.3.10 lgnition key 135
3.3.11 Confirmation button 135
3.3.12 Horn 137
3.3.13 Raising and lowering operator’s cab (option) 137
3.3.14 Windscreen 139
3.3.15 Sun blind 142
3.3.16 Viewing devices 143
3.3.17 Lighting 145
3.3.18 Cab lighting system 146
3.3.19 Beacon (option) 147
3.3.20 Windscreen wipers 148
3.3.21 Windscreen washer system 148
3.3.22 Auxiliary heater (option) 149
3.3.23 LiDAT (option) 149
3.4 Operation 150
3.4.1 lnspection tour before putting into service 150
3.4.2 Refuelling 151
3.4.3 Refuelling with electric refuelling pump (option) 151
3.4.4 Filling with diesel exhaust fluid 153
3.4.5 Preheating system for fuels and operating fluids (option) 154
3.4.6 lmmobiliser (option) 156
3.4.7 Preparing machine for dust intensive application 157
3.4.8 Preparing machine for use in biologically sensitive areas 158
3.4.9 Operator code (option) 158
3.4.10 Starting diesel engine 159
3.4.11 Bringing machine to operating temperature 160
3.4.12 Engine speed and operating mode 160
3.4.13 After starting 162
3.4.14 Sensor-controlled low idle automatic 163
3.4.15 Automatic engine stop after idling (option) 163
3.4.16 Shutting off diesel engine 164
3.4.17 Shutting off diesel engine in an emergency 164
3.4.18 Travelling and braking 165
3.4.19 Travei alarm (option) 168
LH 80 C Litronic – 1529 (USA / CAN)
Operator’s manual
3.4.20 Controlling working attachment 168
3.4.21 Turning and braking uppercarriage 169
3.4.22 Slewing brake 170
3.4.23 Positioning slewing brake 175
3.4.24 Hoist cylinder pressure warning device (option) 175
3.4.25 Lowering boom actively (option) 175
3.4.26 Selecting the working toai 176
3.4.27 Controlling special working attachment with mini-joystick 176
3.4.28 Changing over contrai of right mini-joystick (option) 177
3.4.29 Grapple priority (option) 178
3.4.30 Autolift (Option) 179
3.4.31 Magnet system (option) 180
3.4.32 Reversible fan drive for radiator cleaning (option) 181
Shut-off functions 183
3.5.1 Stick cylinder shut-off (option) 183
3.5.2 Hoist cylinder shut-off (option) 186
3.5.3 Height limitation 190
3.5.4 Depth limitation (option) 200
3.5.5 Overload warning system (option) 208
3.5.6 Load moment limitation (option) 209
General working methods 215
3.6.1 Working without damaging the machine 215
3.6.2 Putting machine in working position 216
3.6.3 Travelling at operating location 217
3.6.4 Travelling with load at operating location 218
3.6.5 Travelling under obstacles 219
3.6.6 Handling loads 219
3.6.7 Loading transport vehicle 220
3.6.8 Lifting loads 220
3.6.9 Use of banksmen 221
3.6.10 Working in windy conditions 228
lnstalling and removing working attachment 230
3.7.1 Using quick coupler 230
3.7.2 lnstalling and removing grapple on industrial stick 230
3.7.3 lnstalling and removing boom 233
Operator’s manual
3.8 Parking machine
3.9 Transport and assembly
3.10 Transport
3.10.1 Preparatory work
3.10.2 Driving machine onto low-loader
3.10.3 After transport
3.11 Emergency operation
3.11.1 Jump starting
3.11.2 Lowering working attachment when engine is shut off
3.11.3 Lowering operator’s cab in an emergency (option)
3.11.4 Towing the machine
4 Malfunctions
4.1 Service code tables
4.1.1 Warning symbols
4.2 Fault – Cause – Remedy
4.2.1 Diesel engine and fuel system
4.2.2 Hydraulic system
4.2.3 Travei gear
4.2.4 Electrical system
4.2.5 Heating, ventilation and air conditioning unit
4.2.6 Working attachment
4.3 Problem remedy
4.3.1 Fuses and relays in the uppercarriage
4.3.2 Operator’s platform fuses and relays
5 Maintenance
5.1 lnspection and maintenance schedule
5.2 Filling quantities and lubrication chart
5.2.1 Lubrication chart
5.3 Fuels, lubricants and operating fluids
5.3.1 General information about lubricants and fuels
5.3.2 Diesel fuels
5.3.3 Diesel exhaust fluids
5.3.4 Engine oils
Operator’s manual
5.3.5 Refrigerant 282
5.3.6 Coolant 283
5.3.7 Hydraulic oils 284
5.3.8 Gearoils 286
5.3.9 Pump distributor gear oils 287
5.3.10 Energy recuperation cylinder oils 288
5.3.11 Greases 288
5.3.12 Windscreen washer fluid 289
5.3.13 Lubricants and care products for electrical and mechanical systems 289
Access points for maintenance work 290
5.4.1 Access points on uppercarriage 290
5.4.2 Access points under the uppercarriage 292
5.4.3 Access points on undercarriage 293
Preparing for maintenance 294
5.5.1 Maintenance procedures 294
5.5.2 Preparing for maintenance 295
5.5.3 Putting machine in maintenance position 297
General maintenance 298
5.6.1 Welding 298
5.6.2 Corrosion-proofing piston rods 298
5.6.3 Cleaning the machine 299
5.6.4 Cleaning travei gear 300
5.6.5 Cleaning fan and radiator 301
Complete machine 302
5.7.1 Checking machine for proper condition and tightness 302
5.7.2 Lubricating bearings on machine and working attachment 307
5.7.3 Checking components for cracks 309
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 310
5.7.5 Checking rescue system (option) 310
Drive group 312
5.8.1 Diesel engine: Bringing into maintenance position 312
5.8.2 Diesel engine: Checking oil level 312
5.8.3 Fuel pre-filter: Draining water 313
5.8.4 Fuel tank: Draining water and sediments 314
copyright© Liebherr-Hydraulikbagger GmbH 2020
llEBHERR LH 80 C Litronic – 1529 (USA / CAN)
/76315
Operator’s manual
5.8.5 Air filter: Emptying dust collecting tank
5.8.6 Air filter: Replacing main filter cartridge
5.8.7 Air filter: Replacing safety filter cartridge
5.8.8 Pump distributor gear: Checking oil level
5.8.9 Diesel particulate filter: Activating and deactivating regeneration
5.9 Cooling system
5.9.1 Checking coolant level
5.9.2 Checking cooling system and heat exchanger for contamination
5.10 Working hydraulics
5.10.1 Depressurising hydraulic system
5.10.2 Hydraulic tank: Checking oil level
5.10.3 Hydraulic tank: Draining water and sediments
5.10.4 Return filter: Checking and cleaning magnetic rod
5.10.5 Return leakage oil filter: Replacing filter cartridge
5.10.6 Bypass filter (option): Checking degree of contamination of filter
cartridge
5.11 Electrical system
5.11.1 General information
5.12 Travei gear
5.12.1 Checking track tension
5.12.2 Tightening track
5.12.3 Slackening track
5.12.4 Determining track type
5.13 Working attachment
5.13.1 Lubricating working tool
5.13.2 Checking pin bearings for wear
5.14 Operator’s cab, heating and air conditioning
5.14.1 Filling with windscreen washer fluid
5.14.2 Heating: Checking function
5.14.3 Auxiliary heater (option): Checking function
5.14.4 Switching on air conditioning unit
5.14.5 Checking and cleaning condenser
5.15 Lubrication system
5.15.1 Lubrication system: Filling with grease
5.15.2 Checking lubrication of bearings (grease collar)
Contents
5.16 Slewing gearbox and slewing ring
5.16.1 Slewing gearbox: Checking oil level
6 Appendix
lndex

 Customer Support: [email protected]

https://vimeo.com/824325985?share=copy

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M