Liebherr R 930 1716 (USA CAN) Hydraulic Excavator Operator’s Manual 49250 – PDF DOWNLOAD

Description

Liebherr R 930 1716 (USA CAN) Hydraulic Excavator Operator’s Manual 49250 – PDF DOWNLOAD

FILE DETAILS:

Liebherr R 930 1716 (USA CAN) Hydraulic Excavator Operator’s Manual 49250 – PDF DOWNLOAD

Language : English
Pages : 372
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Liebherr R 930 1716 (USA CAN) Hydraulic Excavator Operator’s Manual 49250 – PDF DOWNLOAD

Product ID:

Manufacturer : Liebherr-France SAS
Type : R 930
Type no. : 1716 (USA/CAN)
From Serial no. : 49250

Preface:

• This operator’s manual is intended for you as operator or maintenance staff. It
  contains warnings, important information and tips for working with the machine. It
  simplifies the process of familiarisation and getting to know the machine, and helps
  to avoid malfunctions caused by incorrect operation.
• Compliance with the operator’s manual increases the reliability and service life of
  the machine.
• The operator’s manual must be kept with the machine. Make sure that a copy
  is always kept close to hand at the workplace.
• Read the operator’s manual before putting into service for the first time and subsequently
  at regular intervals. Everyone who carries out work with or on the machine
  must be familiar with and use this operator’s manual.

Examples of this work:
Operation including setup and fitting attachments, elimination of malfunctions,
care, disposal of lubricants and fuels
Service including maintenance, inspection and repair work
Transporting or loading the machine

• The owner is responsible for supplementing the operator’s manual with instructions
  based on existing national regulations on accident prevention and environmental
  protection. In addition to this operator’s manual and the regulations on accident
  prevention applicable in the user’s country and at the place of use, it is also
  necessary to comply with the recognised technical rules on safety and technically
  proficient working.
• Some sections of this operator’s manual do not apply to all machines.
• Some illustrations in this operator’s manual may show details and implements that
  are different from your machine.
• In some illustrations, protective devices and covers have been removed to provide
  a clearer representation.
• Due to continuous improvements to Liebherr machines, it is possible that changes
  to your machine are not contained in this operator’s manual. The continuous
  updating of the operator’s manual considers only the latest software version. For
  optimum interaction between machine and operator’s manual, it is necessary that
  the software version described in the operator’s manual corresponds to the software
  version of the machine. The latest operator’s manual is available on the
  Myliebherr portal. For updating of the machine, contact the Liebherr customer
  service.
• If you require further explanations or information, please contact Liebherr customer
  service.
• All documentation purchased for this machine (operator’s manual, maintenance
  manual, spare parts catalogue,… )is available from Myliebherr for the entire
  service life of a machine.

TABLE OF CONTENTS:

Liebherr R 930 1716 (USA CAN) Hydraulic Excavator Operator’s Manual 49250 – PDF DOWNLOAD

1 Product description 17
1.1 Technical description 17
General overview 17
Uppercarriage 18
Undercarriage 19
1.2 Technical data 20
Vibration emission 20
Sound level 20
Specifications 21
1.3 Warranty conditions 22
Additional information, USA 22
Warranty declaration, emission limits, warranty rights and obligations 22
Warranty coverage from manufacturer 22
Warranty obligations of the owner 23
Warranty 23
Warranty parts 23
Exclusions 24
Safety warnings 25
2.1 Information on these instructions 25
Representation of warning messages 25
Graphic symbols in these instructions 25
2.2 Intended use 26
Laws, rules, guidelines and safety regulations 26
Intended use 26
Foreseeable misuse 27
Operating conditions 27
Disposal 28
2.3 Description of staff 29
Contents Operator’s manual
2.3.1 Personal protective equipment 29
2.3.2 Requirements for staff 29
2.3.3 Operating company 30
2.3.4 Operator 30
2.3.5 Maintenance staff 31
2.3.6 Electrical engineer 32
2.3.7 Refrigeration technician 33
2.3.8 Slinger 33
2.3.9 Spotter 34
2.4 Signs on the machine 35
2.4.1 Location of signs 35
2.4.2 Safety signs 36
2.4.3 Information signs 39
2.4.4 Identification plates 43
2.5 Protective devices on the machine 43
2.5.1 Safety lever or folding console 43
2.5.2 Operator’s cab 43
2.5.3 Height-adjustable operator’s cab 44
2.5.4 Tip over protective structure (TOPS) 44
2.5.5 Roll over protective structure (ROPS) 45
2.5.6 Falling object protective structures (FOPS and FGPS) 45
2.6 Emergency equipment on the machine 46
2.6.1 Emergency exit (standard) 46
2.6.2 Fire extinguisher (option) 46
2.6.3 Emergency command devices of machine 46
2.6.4 Emergency stop function of machine 47
2.7 Safe operation 47
2.7.1 Intoxicants 47
2.7.2 Dangerous fuels and operating fluids 47 89足
2.7.3 Transporting machine 48 5`~
2.7.4 Access to machine 4 8 圣稳衬
2.7.5 Machine danger zone 4 9 亡匡
2.7.6 Visibility 49
2.7.7 Protection against vibration 50
2.7.8 Operation of machine 51
copyright© Liebherr-France SAS 2021
8 Ill匝驯IRR R 930 – 1716 (USA / CAN) / 49250
Operator’s manual Contents
2.7.9 Load-lifting work 54
2.8 Safe work 55
2.8.1 Hydraulic hammer 55
2.9 Safe maintenance 55
Spare parts 55
Heavy parts 56
Regular checks 56
2.10 Modifications to the machine 56
2.10.1 Modifications, add-ons and retrofittings 56
Control and operation 59
3.1 Control and operating elements 59
Display
Overview of operator’s platform 59
Control unit A 60
Control unit B (option) 61
Further control units 61
Display 62
Status symbols 63
Start page menu 70
Camera menu 71
Air conditioning 72
Operating status menu 74
Diesel particulate filter submenu (option) 75
Sensor-controlled low idle automatic and automatic engine stop
submenu (option) 76
Measurement displays submenu 77
System settings menu 77
Operating hour meter submenu 79
Windscreen wiper interval submenu 79
Radio remote control submenu 80
Display brightness and display volume submenu 81
Camera image contrast submenu 81
Camera return time submenu 82
Unit selection submenu 82
System diagnosis submenu (SCOTTI) 83
Time zone submenu 83
Time format and date format submenu 84
Language selection submenu 84
Brightness of LED headlights submenu (option) 85
Unlocking with PIN code (option) submenu 86
Electrical outputs submenu 86
Electrical inputs submenu 87
Function settings menu 88
Central lubrication system submenu (option) 89
Maintenance submenu 90
SF submenu 91
Adjustment modes submenu 92
User profile submenu 94
Working tools submenu 95
Movement restriction for boom and movement restriction for stick
submenu (option) 97
Control
Automatic reversible fan drive submenu (option) 98
Priority between lifting boom and turning uppercarriage submenu 99
Priority between working tool and working attachment submenu 99
Stick priority submenu (option) 100
Braking force of slewing brake submenu 101
On-screen keyboard submenu 101
Information menu 102
Operating hours submenu 102
Fuel consumption submenu 103
Key assignment submenu 104
CodingKey submenu 104
Tool Control menu
Tool Control symbols
Service codes menu
Deleting rotary motion error symbols
Battery main switch 111
Entering and exiting machine 112
Emergency exit 113
Fire extinguisher (option) 114
Folding console 115
Operator’s seat 116
Safety belt 124
Confirmation button 125
Horn 127
Windscreen 127
Sun blinds 130
Side windows 132
Viewing devices 132
Lighting 139
Cab lighting system 141
Windscreen wipers 142
Auxiliary heater (option) 142
3.4 Operation 144
Inspection tour before putting into service 144
Refuelling 145
Refuelling with electric refuelling pump (option) 145
Refuelling diesel exhaust fluid 147
Immobiliser 148
Preparing machine for dust intensive application 154
Preparing machine for use in biologically sensitive areas 154
Starting diesel engine 154
Bringing machine to operating temperature 156
Engine speed and operating mode 156
After starting 157
Sensor-controlled low idle automatic 158
Automatic engine stop after idling (option) 160
Shutting off diesel engine 160
Travelling and braking 162
Travel alarm (option) 166
Controlling working attachment 166
Turning and braking uppercarriage 168
Float position of boom (option) 171
Controlling special working attachment without mini一joystick (option) 174
Controlling special working attachment with mini-joystick (option) 177
Tiltrotator (option) 180
Using working tool in continuous mode (option) 181
Control changeover (option) 183
Control changeovers for joysticks (option) 185
3.5 Movement restriction for working attachment 186
Movement restriction for stick (option) 186
Movement restriction for boom (option) 189
Overload warning system (option) 192
3.6 General working methods 194
Working without damaging machine 194
Putting machine in working position 196
Travelling on slopes 196
Travelling under obstacles 198
Working in water 198
Working on slope 198
Working with backhoe bucket 199
Ground surface grading 200
Working with hydraulic hammer 201
Working with the grapple 204
Working with clamshell 204
Handling loads 206
Loading transport vehicle 206
Lifting loads 207
Lifting loads with quick coupler 208
Lifting loads with load lift hook (option) 210
3.7 Installing and removing working attachment 212
Installing and removing working attachment pins 212
Installing and removing bucket 212
Installing and removing bucket with special seal 214
Using quick coupler 215
Installing and removing grapple on the stick 215
Installing and removing grapple on industrial stick
Installing and removing stick 219
3.7.8 Installing and removing boom 219
3.8 Parking machine 220
Parking machine on level ground 220
Parking machine on a slope 221
3.9 Transport 222
Preparatory work 222
Adjusting undercarriage width mechanically (option) 223
Driving machine onto low-loader 228
Lifting machine 230
Tying down machine 234
After transport 235
3.10 Emergency operation 238
Jump starting 238
Lowering working attachment when engine is shut off 239
Central lubrication system 240
Towing 240
4Malfunctions 243
4.1 Service code tables 243
Warning symbols 243
SCR system 246
4.2 Fault – Cause – Remedy 248
Diesel engine and fuel system 248
Hydraulic system 251
Travel gear 251
Electrical system 252
Heating, ventilation and air conditioning unit 252
Working attachment 253
U8/~0,zo,(ZOZH0/688 寸szzu工LLT
4.3 Problem remedy 254
4.3.1 Fuses and relays 254
Maintenance 263
Inspection and maintenance schedule 263
Filling quantities and lubrication chart 269
5.2.1 Filling quantities 269
R 930 – 1716 (USA / CAN) / 49250
copyright IC! Liebherr-France SAS 2021
IIIBHIRR 13
Contents Operator’s manual
5.2.2 Lubrication chart 270
5.3 Fuels, lubricants and operating fluids 276
Diesel fuels 276
Diesel exhaust fluids 277
Engine oils 277
Refrigerant 278
Coolant 279
Hydraulic oils 280
Slewing gearbox oils 282
Pump distributor gear oils 283
Greases 284
Windscreen washer fluid 284
Lubricants and care products for electrical and mechanical systems 284
5.4 Access points for maintenance work 286
Access points on uppercarriage 286
Access points under uppercarriage 287
Access points on undercarriage 288
5.5 Preparing for maintenance 289
Maintenance procedures 289
Safety instructions 290
Putting machine in maintenance position 291
5.6 General maintenance 293
Welding 293
Bleeding hydraulic cylinders 293
Applying corrosion protection to piston rods 294
Cleaning the machine 295
Cleaning travel gear 296
Cleaning fan and radiator 297
Corrosion protection
5.7 Complete machine
Checking machine for proper condition and tightness
Lubricating bearings on machine and working attachment 308
Checking components for cracks 309
5.8 Drive group 312
5.8.1 Diesel engine: Putting in maintenance position 312
Diesel engine: Checking oil level 312
Fuel pre-filter: Draining water 314
Fuel tank: Draining water and sediments 315
Air filter: Emptying dust collecting tank 316
Air filter: Replacing main filter cartridge 316
Pump distributor gear: Checking oil level 318
Diesel particulate filter (option): Activating and deactivating
regeneration 319
Diesel exhaust fluid tank: Cleaning sieve 320
5.9 Cooling system 322
Checking coolant level 322
Coolant: Checking concentration 323
Working hydraulics 327
Depressurising hydraulic system 327
Hydraulic tank: Checking oil level 328
Hydraulic tank: Draining water and sediments 330
Bypass filter (option): Checking level of contamination of filter cartridge 331
Electrical system 332
5.11.1 General information 332
Travel gear 333
Checking track tension 333
Tightening track 334
Slackening track 335
Determining track type 336
Working attachment 337
Lubricating working tool 337
Checking pin bearings for wear 337
Operator’s cab, heating and air conditioning 339
Filling with windscreen washer fluid 339
Heating: Checking function 339
Auxiliary heater (option): Checking function 341
Switching on air conditioning unit 342
Cleaning pre-filter 342
Lubrication system 344
5.15.1 Lubrication system: Topping up grease 344
5.15.2 Checking lubrication of bearings (grease collar) 344
5.16 Slewing gearbox and slewing ring 345
5.16.1 Slewing gearbox: Checking oil level 345
6Appendix 347
Index 349

Contact us: [email protected]

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V