Liebherr R 934 C Demolition 023 033 1335 1337 Hydraulic Excavator Operating Manual SN 30761 – PDF DOWNLOAD

Description

Liebherr R 934 C Demolition 023 033 1335 1337 Hydraulic Excavator Operating Manual SN 30761 – PDF DOWNLOAD

FILE DETAILS:

Liebherr R 934 C Demolition 023 033 1335 1337 Hydraulic Excavator Operating Manual SN 30761 – PDF DOWNLOAD

Language : English
Pages : 416
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Liebherr R 934 C Demolition 023 033 1335 1337 Hydraulic Excavator Operating Manual SN 30761 – PDF DOWNLOAD

Product identification
Manufacturer: Liebherr-France SAS
Type: R 934 C – Demolition
Type no.: 023 / 033 / 1335 / 1337
Conformity: CE

Introduction:

• This operating manual has been specifically devised for machine operators and maintenance personnel. It contains important warnings, information and tips regarding the maintenance and proper operation of the machine. It assists you in becoming familiar with the functions and features of the machine and helps prevent incorrect operation.
• By strictly adhering to the instructions in the operating manual, you can significantly enhance the reliability and service life of the machine.
• The operating manual is an integral part of the scope of delivery of the machine. Ensure that a copy is at all times available in the storage compartment in the operator’s cab.
• Carefully read the operating manual before starting the machine and then regularly read it again. All persons carrying out work on or with the machine must be fully familiar with the content of the operating manual and must adhere to the instructions.

• The machine owner must ensure that this operating manual is complemented with the relevant statutory regulations for accident prevention and the protection of the environment. Apart from the instructions in this operating manual and the statutory accident prevention, health and safety regulations applicable in the country of operation, all personnel working on or with the machine must adhere to best practice for safe and proper operation.
• Certain sections in this manual might not apply to your specific model.
• Some of the figures in this operating manual might show details or equipment that differ from those in your machine.
• Some of the figures show the equipment with guards or covers removed (for better depiction).
• As our products are constantly being improved, certain changes might be made to the equipment which are not referred to specifically in this operating manual.
• Should you require additional information or if you have any queries, please contact the LIEBHERR customer service department.

Warranty and liability:

• Due to the range of products (e.g. fuels, lubricants, tool attachments, spare parts) available from other manufacturers, LIEBHERR is not in a position to assess the compatibility of these products with its own machines. This also applies in relation to possible effects that third-party products have on LIEBHERR products and vice versa.
• It is therefore the responsibility of the machine owner to assess whether third-party products can be safely used in conjunction with the LIEBHERR machine. LIEBHERR shall not be liable for damage to or downtimes of LIEBHERR machine caused by the use a third-party products. Such damage is not covered by the LIEBHERR warranty.
• LIEBHERR shall not be liable for damage caused by improper operation, insufficient maintenance or non-compliance with safety instructions.

Amendments, general terms and conditions, copyright:

• We reserve the right to modify our products and amend the instructions in this operating manual without prior notice.
• The reproduction or publication of the content of this operating manual (including figures) is prohibited. LIEBHERR reserves all rights in this operating manual, including copyright.
• The warranty and liability clauses of the general business terms and conditions of LIEBHERR apply.

TABLE OF CONTENTS:

Liebherr R 934 C Demolition 023 033 1335 1337 Hydraulic Excavator Operating Manual SN 30761 – PDF DOWNLOAD

1 Product description 1-1
1 1 Assembly – overview 1-1
1 1 1 Machine with backhoe attachment 1-1
1 1 2 Machine with demolition attachment 1-2
1 1 3 Uppercarriage 1-3
1 1 4 Undercarriage 1-4
1 2 Vibration emissions 1-4
1 3 Sound emission 1-5
1 4 EC Declaration of Conformity 1-6
1 5 Technical data 1-7
2 Safety instructions, Signs on the machine 2-1
2 1 Meaning of the symbols in this manual 2-1
2 2 Use in accordance with the regulations 2-2
2 3 Safety Instructions 2-2
2 4 Servicing the machine safely 2-16
2 5 Signs on the machine 2-23
2 5 1 Types of signs 2-23
2 5 2 Arrangement of signs 2-23
2 5 3 Explanation of signs 2-25
2 5 4 Nameplates on the machine 2-31
3 Control and operation 3-1
3 1 Operating and control elements 3-1
3 1 1 Controls in the op 3-1
3 1 2 The joysticks 3-3
3 1 3 Control unit 3-7
3 1 4 Monitoring display 3-12
3 1 5 Main screen 3-15
3 1 6 Information provided in the menus 3-22
3 1 7 Glancing through the available menus 3-37
3 1 8 Controls on side control desks 3-38
3 1 9 Controls and instrumentation for optional equipment 3-39
3 1 10 Display for LIEBHERR particle filter (option) 3-43
3 2 Access and equipment of the cab 3-45
3 2 1 Entering or leaving the cab 3-45
3 2 2 Safety lever 3-47
3 2 3 Operator seat 3-48
3 2 4 Putting on and releasing the safety belt 3-51
3 2 5 Windscreen 3-52
3 2 6 Sunshade 3-52
dow 3-53
3 2 8 Interior lights 3-53
3 2 9 Fire extinguisher 3-54
3 2 10 Windscreen wiper 3-55
3 2 11 The heater and air conditioner 3-56
3 2 12 Additional standstill heater (option) 3-61
3 3 Setting the machine into operation 3-66
3 3 1 Before starting the machine 3-66
3 3 2 Turning on the electrical system 3-67
3 3 3 Starting the Diesel engine 3-68
3 3 4 Speed adjustment and operating modes 3-69
3 3 5 Notes after starting the engine 3-71
3 3 6 Warm-up phase for Diesel engine and hydraulic circuit 3-71
Operating manual
R 934 C – Demolition / 10070206
MJFCIFSS
copyright by
3 3 7 Switching the Diesel engine off 3-72
3 3 8 Automatic motorstop after low idle (option) 3-74
3 3 9 Starting aids 3-74
3 3 10 Jump start procedure 3-76
3 3 11 Immobilizer with electronic ignition key (option) 3-76
3 4 Working with the machine 3-78
3 4 1 Low idle automatic 3-78
3 4 2 Travel functions 3-79
3 4 3 Travel warning device (option) 3-83
3 4 4 Uppercarriage swing movements 3-84
3 4 5 Working position 3-87
3 4 6 Working attachment control 3-87
3 4 7 Lowering the working attachment with the engine shut down 3-89
3 4 8 Description of the reach monitoring system Liebherr Demolition Control (LDC) 3-90
3 4 9 Determining the Excavator Configuration Number (ECN) of the reach monitoring
system LDC 3-91
3 4 10 Setting the ECN 3-95
3 4 11 Control of a long-reach demolition attachment 3-97
3 4 12 Demolition work with the reach monitoring system LDC 3-100
3 4 13 Rotating, tilting, locking and unlocking a working tool 3-105
3 4 14 Control of the swivel rotator (option) 3-107
3 4 15 Control of the hammer or the shears 3-108
3 4 16 AHS11 proportional control (option) 3-110
3 4 17 Commutation of control for an additional attachment (option) 3-111
3 4 18 Switching to the special control system (option) 3-113
3 4 19 Special control (option) 3-115
3 4 20 Cut-off of attachment movements (option) 3-115
3 4 21 Use of the excavator for lifting loads overhead 3-118
3 4 22 Overload warning system (option) 3-119
3 4 23 Adjustable hydraulic cab (option) 3-120
3 5 Operating the excavator in safety modes 3-123
3 5 1 Board E52 for safety mode of Diesel engine & servo control 3-123
3 5 2 Safety operation of the main working pumps 3-125
3 6 Recovering, towing the machine 3-126
3 7 Working methods 3-127
3 7 1 Minimum impact working methods for your machine 3-127
3 7 2 Preparatory activities 3-128
3 7 3 Using a backhoe bucket 3-129
3 7 4 Loading a transport vehicle 3-130
3 7 5 Skimming 3-131
3 7 6 Using a clamshell bucket (earthmoving attachment) 3-132
3 7 7 Using a multiple tine grapple (industrial attachment) 3-134
3 7 8 Using an hydraulic hammer 3-135
4 Troubleshooting 4-1
4 1 Error code list 4-2
4 2 Faults and remedies 4-8
4 2 1 Diesel engine and fuel system 4-8
4 2 2 Hydraulic system 4-9
4 2 3 Transmission 4-10
4 2 4 Electrical system 4-11
4 2 5 Work equipment 4-11
4 2 6 Heating/air-conditioning system 4-12
4 2 7 LIEBHERR particles filter system 4-13
4 2 8 Errors of LIEBHERR reach monitoring system LDC 4-14
4 3 Fuses and relays 4-18
4 3 1 Fuse box E50 4-18
4 3 2 A1010 Plate 4-19
Operating manual
R 934 C – Demolition / 10070206
MJFCIFSS
copyright by
5 Maintenance 5-1
5 1 Maintenance access doors 5-1
5 1 1 Overview of access doors 5-1
5 1 2 Door lock 5-2
5 2 Cleaning machine 5-2
5 3 Care for rubber components 5-3
5 4 Lubricants and fluids 5-3
5 4 1 General information 5-3
5 4 2 Filling quantities and lubricating chart 5-4
5 5 Lubricants and fluids specification 5-7
5 5 1 Diesel fuels 5-7
5 5 2 Lubricating oil for the diesel engine 5-8
5 5 3 Coolants for diesel engine 5-10
5 5 4 Hydraulic oil 5-13
5 5 5 Lubricants for gearboxes 5-19
5 5 6 Grease 5-20
5 5 7 Lubricants and care products for electrical and mechanical components 5-21
5 6 Diesel engine 5-21
5 6 1 Checking the oil level in the diesel engine 5-21
5 6 2 Changing the diesel engine oil 5-22
5 6 3 Belt for the A/C compressor and alternator installation 5-23
5 6 4 Vibration damper 5-24
5 6 5 Checking mounting screws 5-25
5 6 6 Oil separator 5-26
5 6 7 Heater flange 5-27
5 6 8 Checking and adjustment of valve clearance 5-27
5 7 LIEBHERR particles filter (option) 5-30
5 7 1 Drain the condensation water 5-30
5 7 2 Water separator maintenance 5-30
5 8 Cooling system 5-31
5 8 1 Checking and cleaning the cooling system 5-31
5 8 2 Checking the coolant level 5-32
5 8 3 Changing the coolant 5-32
5 8 4 Check of the coolant and adjustment of the mixing ratio 5-34
5 8 5 Reversible fan (option) 5-38
5 9 Fuel system 5-39
5 9 1 Refuelling 5-39
5 9 2 Electrical refuelling pump (optional extra) 5-40
5 9 3 Draining the fuel tank 5-42
5 9 4 Emptying and cleaning the fuel tank 5-43
5 9 5 Draining the fuel prefilter 5-43
5 9 6 Changing fuel filter cartridges 5-44
5 9 7 Bleeding the fuel system 5-46
5 10 Dry air filter 5-49
5 10 1 Changing the main element 5-50
5 10 2 Changing the safety element 5-52
5 10 3 Monitoring the filtered air line 5-52
5 11 Hydraulic system 5-52
5 11 1 Depressurizing the hydraulic system 5-53
5 11 2 Checking the oil level, emptying and refilling the hydraulic tank 5-54
5 11 3 Return-line filter 5-56
5 11 4 Leak oil filter 5-58
5 11 5 Control oil filter 5-58
5 11 6 Replenishing oil filter in swing circuit 5-59
5 11 7 Control circuit 5-60
5 11 8 Bleeding the hydraulic pumps 5-60
5 11 9 Bleeding the hydraulic cylinders 5-62
5 11 10 Removing the intake hose to the pumps 5-64
Operating manual
R 934 C – Demolition / 10070206
MJFCIFSS
copyright by
5 11 11 Vent filter on the hydraulic tank 5-65
5 11 12 Bypass oil filter for hydraulic system (option) 5-66
5 11 13 Return oil filter for hydraulic hammer (option) 5-67
5 11 14 Servicing the hydraulic cylinder 5-68
5 11 15 Replacing hydraulic hoses 5-69
5 12 Oil changes on components 5-70
5 12 1 General information 5-70
5 12 2 Swing gear – Oil level check and oil change 5-71
5 12 3 Travel gear oil change 5-71
5 12 4 Splitterbox – Oil change 5-73
5 13 Travel gear 5-74
5 13 1 Checking the travel gear component mountings 5-74
5 13 2 Checking the track chains tension 5-75
5 13 3 Retensioning the track 5-77
5 13 4 Releasing the track chain tension 5-77
5 13 5 Cleaning the track components 5-78
5 14 Hydraulic undercarriage 5-79
5 14 1 Retracting and extending the track frames 5-80
5 14 2 Lubricating the hydraulic undercarriage 5-81
5 14 3 Checking the track gauge of the track frames (CVC-1 only) 5-83
5 15 Electrical system 5-84
5 15 1 Notes on the electrical system 5-84
5 15 2 Main battery switch 5-85
5 15 3 Battery care 5-85
5 16 Heating/air-conditioning system 5-86
5 16 1 Recirculated and fresh air filters 5-86
5 16 2 Heating system 5-87
5 16 3 Air-conditioning system 5-88
5 16 4 Cab pressuring system (option) 5-90
5 17 Greasing the machine 5-91
5 17 1 The centralized lubrication system 5-91
5 17 2 Semi automatic and full automatic systems 5-93
5 17 3 Operation of the semi automatic system 5-93
5 17 4 Operation of the full automatic system 5-94
5 17 5 Emergency lubrication with defective lubrication system 5-96
5 17 6 To refill a grease container 5-96
5 17 7 Changes in the lubrication circuit 5-97
5 17 8 Greasing the grab (optional extra) 5-98
5 18 Quick-change systems 5-99
5 18 1 Greasing the mechanical quick-change adapter (option) 5-99
5 18 2 Hydraulic quick-change adapter (option) 5-99
5 18 3 LIKUFIX (option) 5-100
5 19 Check mounting bolts for tightness 5-101
5 19 1 Mounting bolts of the counterweight 5-102
5 19 2 Mounting screws of the swing ring 5-102
5 19 3 Mounting screws of the hydraulic oil and fuel tank 5-103
5 19 4 Mounting screws of the swing gear and motor 5-103
5 20 Drive unit brakes and swing gear brakes 5-104
5 21 General maintenance points 5-104
5 21 1 Replacing working parts 5-104
5 21 2 Checking or replacing the teeth on the bucket 5-104
5 21 3 Welding work on the machine 5-106
5 22 Control and maintenance chart 5-107
6 Assembly, disassembly and transport 6-1
6 1 Installation and removal of attachment parts 6-1
6 1 1 Procedures for safety installation and removal of attachment components 6-1
6 1 2 Adaptation of the lubrication circuit for special working attachments 6-2
Operating manual
R 934 C – Demolition / 10070206
MJFCIFSS
copyright by
6 1 3 Installation of a support frame 6-3
6 1 4 Removal of the demolition attachment on support frames 6-4
6 1 5 Installation of the demolition attachment on support frames 6-6
6 1 6 Removal of the backhoe attachment 6-8
6 1 7 Installation of the backhoe attachment 6-11
6 1 8 Removal of the backhoe attachment on a storage rack with catwalk 6-12
6 1 9 Installation of the backhoe attachment on a storage rack with catwalk 6-15
6 1 10 Removal and installation of the demolition attachment on storage racks 6-17
6 1 11 Connection of hydraulic hoses with quick couplings 6-22
6 1 12 Quick change multi-couplings (option) 6-23
6 1 13 Quick coupler for attachment parts (option) 6-25
6 1 14 Hydraulic quick change adapter between the demolition boom and the basic boom (option) 6-27
6 1 15 Double hydraulic quick-change adapters on the basic boom and on the extension (option) 6-29
6 1 16 Removal and installation of a bucket 6-32
6 1 17 Mechanical quick-change adapter (option) 6-33
6 1 18 Hydraulic quick-change adapter (option) 6-38
system (option) 6-44
6 2 Modification of the undercarriage width (option) 6-47
6 2 1 Hydraulic modification of the undercarriage width 6-47
6 3 Installation and removal of the counterweight with the hydraulic system (option) 6-51
6 3 1 Control of the hydraulic system of the counterweight 6-51
6 3 2 Removal of the counterweight with the hydraulic system 6-51
6 3 3 Installation of the counterweight with the hydraulic system 6-53
6 3 4 Lifting the counterweight 6-55
6 4 Transport 6-55
6 4 1 Driving the machine onto the trailer 6-56
6 4 2 Lifting the machine with a crane 6-58
6 4 3 Secure the machine (6 lashing points) 6-59

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V