Liebherr R 964 C 448 1008 1009 1126 1145 1278 1300 1364 1370 1377 1416 1447 1448 Hydraulic Excavator Operating Manual SN 30836

Description

Liebherr R 964 C 448 1008 1009 1126 1145 1278 1300 1364 1370 1377 1416 1447 1448 Hydraulic Excavator Operating Manual SN 30836 – PDF DOWNLOAD

FILE DETAILS:

Liebherr R 964 C 448 1008 1009 1126 1145 1278 1300 1364 1370 1377 1416 1447 1448 Hydraulic Excavator Operating Manual SN 30836 – PDF DOWNLOAD

Language : English
Pages : 364
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Liebherr R 964 C 448 1008 1009 1126 1145 1278 1300 1364 1370 1377 1416 1447 1448 Hydraulic Excavator Operating Manual SN 30836 – PDF DOWNLOAD

Product identification
Manufacturer: Liebherr-France SAS
Type: R 964 C
Type no.: 448 / 1008 / 1009 / 1126 / 1145 / 1278 / 1300 / 1364 /
1370 / 1377 / 1416 / 1447 / 1448
Conformity: CE

Introduction:

• This operating manual has been specifically devised for machine operators and maintenance personnel. It contains important warnings, information and tips regarding the maintenance and proper operation of the machine. It assists you in becoming familiar with the functions and features of the machine and helps prevent incorrect operation.
• By strictly adhering to the instructions in the operating manual, you can significantly enhance the reliability and service life of the machine.
• The operating manual is an integral part of the scope of delivery of the machine. Ensure that a copy is at all times available in the storage compartment in the operator’s cab.
• Carefully read the operating manual before starting the machine and then regularly read it again. All persons carrying out work on or with the machine must be fully familiar with the content of the operating manual and must adhere to the instructions.

• The machine owner must ensure that this operating manual is complemented with the relevant statutory regulations for accident prevention and the protection of the environment. Apart from the instructions in this operating manual and the statutory accident prevention, health and safety regulations applicable in the country of operation, all personnel working on or with the machine must adhere to best practice for safe and proper operation.
• Certain sections in this manual might not apply to your specific model.
• Some of the figures in this operating manual might show details or equipment that differ from those in your machine.
• Some of the figures show the equipment with guards or covers removed (for better depiction).
• As our products are constantly being improved, certain changes might be made to the equipment which are not referred to specifically in this operating manual.
• Should you require additional information or if you have any queries, please contact the LIEBHERR customer service department.

Warranty and liability:

• Due to the range of products (e.g. fuels, lubricants, tool attachments, spare parts) available from other manufacturers, LIEBHERR is not in a position to assess the compatibility of these products with its own machines. This also applies in relation to possible effects that third-party products have on LIEBHERR products and vice versa.
• It is therefore the responsibility of the machine owner to assess whether third-party products can be safely used in conjunction with the LIEBHERR machine. LIEBHERR shall not be liable for damage to or downtimes of LIEBHERR machine caused by the use a third-party products. Such damage is not covered by the LIEBHERR warranty.
• LIEBHERR shall not be liable for damage caused by improper operation, insufficient maintenance or non-compliance with safety instructions.

Amendments, general terms and conditions, copyright:

• We reserve the right to modify our products and amend the instructions in this operating manual without prior notice.
• The reproduction or publication of the content of this operating manual (including figures) is prohibited. LIEBHERR reserves all rights in this operating manual, including copyright.
• The warranty and liability clauses of the general business terms and conditions of LIEBHERR apply.

TABLE OF CONTENTS:

Liebherr R 964 C 448 1008 1009 1126 1145 1278 1300 1364 1370 1377 1416 1447 1448 Hydraulic Excavator Operating Manual SN 30836 – PDF DOWNLOAD

1 Product description 1-1
11 Assembly – overview 1-1
111 Machine with backhoe attachment 1-1
112 Machine with shovel attachment 1-2
113 Uppercarriage 1-2
114 Undercarriage 1-3
12 Vibration emissions 1-4
13 Sound emission 1-5
14 EC Declaration of Conformity 1-6
15 Technical data 1-7
2 Safety instructions, Signs on the machine 2-1
21 Meaning of the symbols in this manual 2-1
22 Use in accordance with the regulations 2-2
23 Safety Instructions 2-2
24 Servicing the machine safely 2-14
25 Signs on the machine 2-20
251 Types of signs 2-20
252 Arrangement of signs 2-21
253 Explanation of signs 2-22
254 Nameplates on the machine 2-29
3 Control and operation 3-1
31 Operating and control elements 3-1
311 Controls in the op 3-1
312 The joysticks 3-3
313 Control unit 3-7
314 Monitoring display 3-12
315 Main screen 3-15
316 Information provided in the menus (Software Version V60) 3-24
317 Controls on side control desks 3-38
318 Controls and instrumentation for optional equipment 3-40
319 Display for LIEBHERR particle filter (option) 3-45
32 Access and equipment of the cab 3-47
321 Entering or leaving the cab 3-47
322 Safety lever 3-49
323 Operator seat 3-49
324 Putting on and releasing the safety belt 3-53
325 Windscreen 3-53
326 Sunshade 3-54
dow 3-55
328 Interior lights 3-55
329 Fire extinguisher 3-55
3210 The heater and air conditioner 3-56
3211 Additional standstill heater (option) 3-62
33 Setting the machine into operation 3-67
331 Before starting the machine 3-67
332 Turning on the electrical system 3-68
333 Starting the Diesel engine 3-69
334 Speed adjustment and operating modes 3-70
335 Notes after starting the engine 3-72
336 Warm-up phase for Diesel engine and hydraulic circuit 3-72
337 Switching the Diesel engine off 3-73
338 Automatic motorstop after low idle (option) 3-75
Operating manual
R 964 C / 10069853
MJFCIFSS
copyright by
339 Starting aids 3-75
3310 Jump start procedure 3-77
3311 Immobilizer with electronic ignition key (option) 3-77
34 Working with the machine 3-80
341 The travel movements 3-80
342 Travel warning device (option) 3-84
343 The uppercarriage swing movements 3-85
344 Working position 3-88
345 Working attachment control 3-88
346 Lowering the working attachment with the engine shut down 3-90
347 Rotating, tilting, locking and unlocking a working tool 3-91
348 Lifting magnet control system (optional equipment) 3-92
349 Control of additional attachments via the additional pedals 3-93
3410 Commutation of control for an additional attachment (option) 3-96
3411 Cut-off of attachment movements (option) 3-98
3412 Use of the excavator for lifting loads overhead 3-100
3413 Overload warning system (option) 3-101
3414 Adjustable hydraulic cab (option) 3-103
35 Operating the excavator in safety modes 3-106
351 Board E52 for safety mode of Diesel engine & servo control 3-106
352 Safety operation of the main working pumps 3-109
353 Emergency attachment lowering with defective servo circuit 3-110
354 Emergency supply of the boom cylinders (option) 3-111
36 Recovering, towing the machine 3-113
361 Towing with the machine, emergency towing of the machine 3-113
37 Installation and removal of attachment parts 3-117
371 Removal and installation of a bucket 3-117
372 Attaching and dismounting the bucket with improved sealing 3-119
373 Attaching and dismounting the grab on stick 3-121
374 Attaching and dismounting the grab on the industrial stanchion 3-124
375 Attaching and dismounting the stick to the boom 3-126
376 Mechanical quick-change adapter (option) 3-128
377 Hydraulic quick-change adapter (option) 3-132
system (option) 3-139
38 Working methods 3-142
381 Minimum impact working methods for your machine 3-142
382 Preparatory activities 3-142
383 Using a backhoe bucket 3-143
384 Loading a transport vehicle 3-145
385 Skimming 3-145
386 Using a clamshell bucket (earthmoving attachment) 3-146
387 Using a multiple tine grapple (industrial attachment) 3-149
388 Using an hydraulic hammer 3-150
389 Working with a bottom dump bucket 3-151
39 Modification of the undercarriage width (option) 3-153
391 Mechanical modification of the undercarriage width 3-153
310 Installing & removing the serial counterweight 3-158
311 Transport 3-160
3111 Driving the machine onto the trailer 3-161
3112 Lifting the machine with a crane 3-162
3113 Lashing the machine 3-164
4 Troubleshooting 4-1
41 Error code list 4-2
42 Faults and remedies 4-14
421 Diesel engine and fuel system 4-14
422 Hydraulic system 4-15
423 Transmission 4-16
Operating manual
R 964 C / 10069853
MJFCIFSS
copyright by
424 Electrical system 4-17
425 Work equipment 4-17
426 Heating/air-conditioning system 4-18
427 LIEBHERR particles filter system 4-19
43 Fuses and relays 4-21
431 Electrical power box E50 with main fuses 4-21
432 Control plate A1010 with fuses 4-22
5 Maintenance 5-1
51 Maintenance access doors 5-1
511 Overview of access doors 5-1
512 Door retaining rods 5-2
513 Opening, closing, locking the engine hood 21 5-3
52 Cleaning machine 5-4
53 Care for rubber components 5-4
54 Lubricants and fluids 5-5
541 General information 5-5
542 Filling quantities and lubricating chart 5-5
55 Lubricants and fluids specification 5-8
551 Diesel fuels 5-8
552 Lubricating oil for the diesel engine 5-9
553 Coolants for diesel engine 5-11
554 Hydraulic oil 5-14
555 Lubricants for gearboxes 5-20
556 Grease 5-21
557 Lubricants and care products for electrical and mechanical components 5-22
56 Diesel engine 5-22
561 Checking the oil level in the Diesel engine 5-22
562 Replacing the engine oil and the engine oil filter elements 5-23
563 Polyvee belt for the airco compressor and alternator drive 5-25
564 Checking mounting bolts 5-27
565 Oil separator 5-27
566 Heater flanges 5-29
567 Checking and adjustment of valve clearance 5-30
57 LIEBHERR particles filter (option) 5-32
571 Drain the condensation water 5-32
572 Water separator maintenance 5-32
58 Cooling system 5-33
581 Checking and cleaning the cooling system 5-33
582 Checking the coolant level 5-34
583 Changing the coolant 5-34
584 Check of the coolant and adjustment of the mixing ratio 5-37
59 Fuel system 5-40
591 Refuelling 5-41
592 Electrical refuelling pump (optional extra) 5-42
593 Draining the fuel tank 5-45
594 Emptying and cleaning the fuel tank 5-45
595 Draining the fuel prefilter 5-46
596 Replacing the fuel filter elements 5-46
597 Bleeding the fuel system 5-49
510 Dry air filter 5-50
5101 Changing the main element 5-52
5102 Changing the safety element 5-53
5103 Checking the intake air lines 5-53
511 Hydraulic system 5-53
5111 Depressurizing the hydraulic system 5-54
5112 Checking the oil level, emptying and refilling the hydraulic tank 5-55
5113 Checking and cleaning the oil cooler system 5-58
Operating manual
R 964 C / 10069853
MJFCIFSS
copyright by
5114 Return filter 5-58
5115 Servofilter 5-60
5116 Replenishing oil filter in swing circuit 5-60
5117 Servo control circuit 5-61
5118 Air bleeding of the servo control chambers 5-61
5119 Bleeding the hydraulic pumps 5-62
51110 Bleeding the hydraulic cylinders 5-63
51111 Removing the suction hose to the pumps 5-65
51112 Breather filter on the hydraulic tank 5-66
51113 Bypass oil filter for hydraulic system (option) 5-66
51114 High pressure filters in working circuit 5-68
51115 Servicing the hydraulic cylinder 5-69
51116 Replacing hydraulic hoses 5-70
512 Oil changes on components 5-71
5121 General information 5-71
5122 Swing gear – Oil level check and oil change 5-72
5123 Travel gear oil change 5-72
5124 Splitterbox – Oil change 5-74
513 The track components 5-74
5131 Checking the mounting screws of the track components 5-75
5132 Checking the track chains tension 5-75
5133 Retensioning the track 5-77
5134 Releasing the track chain tension 5-77
5135 Cleaning the track components 5-78
514 24 V circuit 5-79
5141 General checks on the 24 V electrical system 5-79
5142 Batteries care 5-80
5143 Batteries switch 5-81
5144 Protection of the 24 V circuit during maintenance works 5-81
515 Heating/air-conditioning system 5-82
5151 Recirculated and fresh air filters 5-82
5152 Heating system 5-83
5153 Air-conditioning system 5-84
516 Greasing the machine 5-86
5161 The centralized lubrication system 5-86
5162 Operation of the full automatic system 5-88
5163 Emergency lubrication with defective lubrication system 5-90
5164 To refill a grease container 5-90
5165 Changes in the lubrication circuit 5-92
5166 Greasing the grab (optional extra) 5-92
517 Quick-change systems 5-93
5171 Greasing the mechanical quick-change adapter (option) 5-93
5172 Hydraulic quick-change adapter (option) 5-93
5173 LIKUFIX (option) 5-95
518 Check mounting bolts for tightness 5-96
5181 Mounting bolts of the counterweight 5-96
5182 Mounting screws of the swing ring 5-96
5183 Mounting screws of the hydraulic oil and fuel tank 5-97
5184 Mounting bolts of the swing gear and motor 5-97
5185 Mounting bolts central piece to side frames (option “removable side frames”) 5-98
519 Drive unit brakes and swing gear brakes 5-98
520 General maintenance points 5-98
5201 Replacing working parts 5-98
5202 Checking or replacing the teeth on the bucket 5-99
5203 Welding work on the machine 5-101
521 Maintenance chart 5-103

Customer Support: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V