Liebherr Shovel 4in1 Operator’s manual – PDF DOWNLOAD

Description

Liebherr Shovel 4in1 Operator’s manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Shovel 4in1 Operator’s manual – PDF DOWNLOAD

Language : English
Pages : 46
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Liebherr Shovel 4in1 Operator’s manual – PDF DOWNLOAD

Preface

• This operating manual is intended for you as the user of the working tool or as maintenance personnel. It contains warnings, important information and tips for working with the working tool. It simplifies the process of familiarisation and getting to know the working tool, and helps to avoid faults caused by incorrect operation. Compliance with the operating manual increases the reliability and service life of the working tool.
• The operating manual belongs to the working tool. Make sure that a copy is always kept close to hand at the workplace. Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the working tool must be familiar with and use this operating manual.
• Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the working tool must be familiar with and use this operating manual

Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of fuels, operating fluids and consumables
– Maintenance including servicing, inspection and repair
– Transport or loading of the working tool

The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.

• Some sections of this operating manual do not apply to all working tools. Some illustrations in this operator’s manual may show details and implements that are different from your working tool.
• In some illustrations, protective devices and covers have been removed to provide a clearer representation. Liebherr working tools are subject to continuous development and improvement.
• This may have resulted in modifications to your working tool which are possibly not referred to in this operator’s manual. If you require further explanations or information, please contact Liebherr customer service.

Liability and warranty

• Due to the wide variety of products offered by other manufacturers (for example fuels and operating fluids, lubricants, working tools and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products which are used in or on Liebherr products.
• The same applies to possible interactions between third-party products and Liebherr products. Third-party products are used in or on Liebherr working tools at the user’s own discretion. Liebherr does not offer any warranty or accept any liability for losses of
• any kind caused by failures of or damage to Liebherr working tools attributable to the use of third-party products.
• Furthermore, Liebherr will not recognise any warranty claims attributable to incorrect operation, inadequate maintenance or the failure to follow safety instructions.

Modifications, conditions, copyright

• Liebherr reserves the right to make modifications in the course of technical development, without issuing prior notification.
• Information and illustrations in these instructions are not allowed to be duplicated, distributed or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
• The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.

TABLE OF CONTENTS:

Liebherr Shovel 4in1 Operator’s manual – PDF DOWNLOAD

1 Product description 11
1.1 Technical description 11
1.1.1 4in1 shovel 11
1.2 Technical data 12
1.2.1 Specifications 12
2 Safety warnings 13
2.1 Information on these instructions 13
2.1.1 Representation of warning messages 13
2.1.2 Graphic symbols in these instructions 13
2.2 Intended use 14
2.2.1 Laws, rules, guidelines and safety regulations 14
2.2.2 Intended use 14
2.2.3 Foreseeable misuse 15
2.2.4 Operating conditions 15
2.2.5 Disposal 16
2.3 Description of staff 16
2.3.1 Personal protective equipment 16
2.3.2 Requirements for staff 17
2.3.3 Operating company 17
2.3.4 Operator 18
2.3.5 Maintenance staff 19
0 ~ 2.3.8 Spotter 21 i …,, 2.4 Signs on the machine 22
;ii 2.4.1 Identification tag 22 I
2.5 Safe operation 22
2.5.1 Intoxicants 22
copyright© Liebherr-Hydraulikbagger GmbH 2018
Shovel llEBHERR 7
Contents Operator’s manual
2.5.2 Dangerous fuels and operating fluids 23
2.5.3 Transporting working tool 23
2.5.4 Machine danger zone 24
2.5.5 Operating working tool 24
2.5.6 Load-lifting work 26
2.6 Safe maintenance 26
2.6.1 Spare parts 26
2.6.2 Heavy parts 26
2.6.3 Regular checks 27
2.7 Modifications to the machine 27
2.7.1 Modifications, add-ons and retrofittings 27
3 Control and operation 29
3.1 Fitting and removing working tool 29
3.1.1 Fitting working tool 29
3.1.2 Connecting hydraulic or electrical lines to working tool 29
3.1.3 Putting working tool into operation 30
3.1.4 Removing working tool 30
3.2 Operation 31
3.2.1 Before putting into service 31
3.2.2 Activating 4in 1 shovel 31
3.3 General working methods 33
3.3.1 Tool-protecting working 33
3.3.2 Working with 4in1 shovel 33
3.3.3 Loading transport vehicle 34
3.4 Transport 35
3.4.1 Transporting working tool 35
4 Maintenance 37 C:
4.1 Inspection and maintenance schedule 37
4.2 Fuels, lubricants and operating fluids 39 ~ i..,
4.2.1 Hydraulic oil 39
4.2.2 Greases 39
4.3 General maintenance 40
4.3.1 Depressurising hydraulic lines 40
copyright© Liebherr-Hydraulikbagger GmbH 2018
8 llEBHERR Shovel
Operator’s manual Contents
4.4 Working attachment 41
4.4.1 Lubricating 4in 1 shovel 41
4.4.2 Cleaning working tool 42
4.4.3 Checking pin connections for secure seating 43
4.4.4 Checking steel parts for cracks 43
4.4.5 Pin bearing: checking for wear 43
4.4.6 Hydraulic hoses: Checking condition 43
4.4.7 Working attachment: Checking function 44
4.4.8 Storing working tool 44
Index 45

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M