Liebherr Sorting grapple SG 208, SG 258, SG 308, SG 40 Operator’s manual – PDF DOWNLOAD

Description

Liebherr Sorting grapple SG 208, SG 258, SG 308, SG 40 Operator’s manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Sorting grapple SG 208, SG 258, SG 308, SG 40 Operator’s manual – PDF DOWNLOAD

Language : English
Pages :80
Downloadable : Yes
File Type : PDF
Size:16.8 MB

DESCRIPTION:

Liebherr Sorting grapple SG 208, SG 258, SG 308, SG 40 Operator’s manual – PDF DOWNLOAD

Product ID
Manufacturer:Liebherr-Hydraulikbagger GmbH
Product type: Sorting grapple
SG 208, SG 258, SG 308, SG 40

Preface

This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid faults caused by incorrect operation.

• Compliance with the operating manual increases the reliability and service life of the machine.
• The operating manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace.
• Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.

Examples of this work:

• Operation, including setup and fitting attachments, elimination of faults, care, disposal of service products and consumables.
• Maintenance, including servicing, inspection, and repair.
• Transporting or loading the machine.

The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with recognized technical rules on safety and technically proficient working.

• Some sections of this operating manual do not apply to all machines.
• Some illustrations in this operating manual may show details and implements that are different from your machine.
• In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine that are possibly not referred to in this operating manual.
• If you require further explanations or information, please contact Liebherr customer service.

Liability and warranty

• Due to the wide variety of products offered by other manufacturers (e.g., service products, lubricants, tool attachments, and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
• Third-party products are used in or on Liebherr machines at the user’s own discretion. Liebherr does not offer any warranty or accept any liability for losses of any kind caused by failures of or damage to Liebherr machines attributable to the use of third-party products.
• Furthermore, Liebherr will not recognize any warranty claims attributable to incorrect operation, inadequate maintenance, or the failure to follow safety instructions.

Modifications, conditions, copyright

• Liebherr reserves the right to make modifications in the course of technical development without issuing prior notification.
• Information and illustrations in these instructions are not allowed to be duplicated, distributed, or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
• The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.

TABLE OF CONTENTS:

Liebherr Sorting grapple SG 208, SG 258, SG 308, SG 40 Operator’s manual – PDF DOWNLOAD

1 Product description 11
1.1 Technical description 11
1.1.1 Sorting grapple 11
1.1.2 Adapter plates 12
1.2 Technical data 13
1.2.1 Specifications 13
2 Safety warnings 15
2.1 Information on these instructions 15
2.1.1 Representation of warning messages 15
2.1.2 Graphic symbols in these instructions 15
2.2 Intended use 16
2.2.1 Laws, rules, guidelines and safety regulations 16
2.2.2 Intended use 16
2.2.3 Foreseeable misuse 17
2.2.4 Operating conditions 17
2.2.5 Disposal 18
2.3 Description of staff 18
2.3.1 Personal protective equipment 18
2.3.2 Requirements for staff 19
2.3.3 Operating company 19
2.3.4 Operator 20
2.4.1 Information signs 23
2.4.2 Identification plate 24
copyright© Liebherr-Hydraulikbagger GmbH 2018
Sorting grapple llEBHERR 7
Contents Operator’s manual
2.5 Safe operation 25
2.5.1 Intoxicants 25
2.5.2 Dangerous fuels and operating fluids 25
2.5.3 Transporting working tool 25
2.5.4 Machine danger zone 26
2.5.5 Operating working tool 26
2.5.6 Load-lifting work 28
2.6 Safe maintenance 28
2.6.1 Spare parts 28
2.6.2 Heavy parts 28
2.6.3 Regular checks 29
2.7 Modifications to the machine 29
2.7.1 Modifications, add-ons and retrofittings 29
3 Control and operation 31
3.1 Fitting and removing working tool 31
3.1.1 Installing sorting grapple with attachment pins 31
3.1.2 Removing sorting grapple with attachment pins 33
3.1.3 Installing and removing working tool with quick coupler 33
3.1.4 Installing and removing working tool with quick coupler suspension for
direct installation 34
3.1.5 Adjusting swing brake 45
3.1.6 Checking swing brake for wear 47
3.2 Operation 48
3.2.1 Before putting into service 48
3.2.2 Operating sorting grapple 48
3.3 General working methods 50
3.3.1 Tool-protecting working 50
3.3.2 Working with the sorting grapple 50 C:
4 Maintenance 55
4.1 Inspection and maintenance schedule 55
copyright© Liebherr-Hydraulikbagger GmbH 2018
8 llEBHERR Sorting grapple
Operator’s manual Contents
4.2 Fuels, lubricants and operating fluids 57
4.2.1 Hydraulic oil 57
4.2.2 Greases 57
4.3 General maintenance 58
4.3.1 Depressurising hydraulic lines 58
4.4 Working attachment 59
4.4.1 Lubricating sorting grapple 59
4.4.2 Cleaning working tool 63
4.4.3 Passfix bearings 64
4.4.4 Checking pin connections for secure seating 67
4.4.5 Checking steel parts for cracks 67
4.4.6 Pin bearing: checking for wear 68
4.4.7 Checking and replacing undercut blades 68
4.4.8 Changing bucket teeth with Z system 71
4.4.9 Hydraulic hoses: Checking condition 72
4.4.10 Working attachment: Checking function 72
4.4.11 Tightening rotary actuator bearing 72
4.4.12 Storing working tool 75
Index 77

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

s.m