Liebherr Webasto Ait Top 2000 ST Operating Instruction Manual – PDF DOWNLOAD

-to defrost vehicle windows.
We presume that the principle and mode of operation of your new heater has been explained to your complete satisfaction by the workshop/service centre which installed the heater. In these operating instructions we would like to once again provide you with an overview of the safe use of the Air Top 2000 ST heater.
Repair or maintenance work not described here may only be carried out by an authorised Webasto dealer.
Servicing and safety instructions
1. Within the territory governed by European Directive 70/156/EEC and/or EC/2007/46 (for new vehicle types from 29/04/2009), there are homologation approvals for the Air Top 2000 ST air heaters in accordance with the ECE-R 122 (Heating) and ECE-R 10 (EMC). NOTE:
The specifications of this Directive are binding in the scope of the Basic Directive EEC/70/156 and/or EC/2007/46 (for new vehicle models from 29/04/2009) and should also be observed in countries in which no special regulations exist. 2. The year in which the heater was used for the first time must be permanently displayed on the factory plate by deleting the inapplicable years from the plate.
3. The heaters are not designed for heating hazardous substance transport compartments.
To install the Air Top 2000 ST D heater unit in hazchem vehicles, the requirements of the Directive ECE-R 122 must be met.
4. Claims can only be made if it can be verified that the claimant has complied with the servicing and safety instructions.
5. The heater must be switched off at filling stations and tank farms as a result of the risk of explosion.
6. The heater may not be operated in enclosed spaces (such as garages) as a result of the risk of poisoning and asphyxiation, even if a timer or Telestart remote is used.
7. The heater must be checked by an expert at the latest at the start of the cold weather period.