Liebherr Wood grapple GMH50 Operator’s manual – PDF DOWNLOAD

Description

Liebherr Wood grapple GMH50 Operator’s manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr Wood grapple GMH50 Operator’s manual – PDF DOWNLOAD

Language : English
Pages : 86
Downloadable : Yes
File Type : PDF
Size:16.5 MB

DESCRIPTION:

Liebherr Wood grapple GMH50 Operator’s manual – PDF DOWNLOAD

Product ID
Manufacturer:
Product type:Liebherr-Hydraulikbagger GmbH
Wood grapple
GMH50

Preface

This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information, and tips for working with the machine. It simplifies the process of familiarization and getting to know the machine and helps to avoid faults caused by incorrect operation.

• Compliance with the operating manual increases the reliability and service life of the machine.
• The operating manual must be kept with the machine. Make sure that a copy is always kept close at hand in the workplace.
• Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.

Examples of this work:

• Operation, including setup and fitting attachments, elimination of faults, care, disposal of service products and consumables.
• Maintenance, including servicing, inspection, and repair.
• Transporting or loading the machine.

The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with recognized technical rules on safety and technically proficient working.

• Some sections of this operating manual do not apply to all machines.
• Some illustrations in this operating manual may show details and implements that are different from your machine.
• In some illustrations, protective devices and covers have been removed to provide a clearer representation.
• Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine that are possibly not referred to in this operating manual.
• If you require further explanations or information, please contact Liebherr customer service.

Liability and warranty

• Due to the wide variety of products offered by other manufacturers (e.g., service products, lubricants, tool attachments, and spare parts), Liebherr cannot examine the general suitability and absence of defects in third-party products used in or on Liebherr products. The same applies to possible interactions between third-party products and Liebherr products.
• Third-party products are used in or on Liebherr machines at the user’s own discretion. Liebherr does not offer any warranty or accept any liability for losses of any kind caused by failures of or damage to Liebherr machines attributable to the use of third-party products.
• Furthermore, Liebherr will not recognize any warranty claims attributable to incorrect operation, inadequate maintenance, or the failure to follow safety instructions.

Modifications, conditions, copyright

• Liebherr reserves the right to make modifications in the course of technical development without issuing prior notification.
• Information and illustrations in these instructions are not allowed to be duplicated, distributed, or used for the purposes of competing with Liebherr. All rights under copyright legislation are expressly reserved.
• The aforementioned provisions do not extend the warranty and liability conditions in the general terms and conditions of business of Liebherr.

TABLE OF CONTENTS:

Liebherr Wood grapple GMH50 Operator’s manual – PDF DOWNLOAD

1 Product description 11
1.1 Technical description 11
1.1.1 Wood grapple 11
1.1.2 Wood grapple with hydraulic hold-down clamp 12
1.2 Technical data 13
1.2.1 Specifications 13
2 Safety warnings 15
2.1 Information on these instructions 15
2.1.1 Representation of warning messages 15
2.1.2 Graphic symbols in these instructions 15
2.2 Intended use 16
2.2.1 Laws, rules, guidelines and safety regulations 16
2.2.2 Intended use 16
2.2.3 Foreseeable misuse 17
2.2.4 Operating conditions 17
2.2.5 Disposal 18
2.3 Description of staff 18
2.3.1 Personal protective equipment 18
2.3.2 Requirements for staff 19
2.3.3 Operating company 19
2.3.4 Operator 20
2.3.5 Maintenance staff 21
2.3.6 Electrical engineer 21
2.3.7 Rigger 22
2.3.8 Spotter 23
2.4 Signs on the machine 23
2.4.1 Information signs 23
2.4.2 Identification plate 24
copyright© Liebherr-Hydraulikbagger GmbH 2018
Wood grapple llEBHERR 7
Contents Operator’s manual
2.5 Safe operation 25
2.5.1 Intoxicants 25
2.5.2 Dangerous fuels and operating fluids 25
2.5.3 Transporting working tool 25
2.5.4 Machine danger zone 26
2.5.5 Operating working tool 26
2.5.6 Load-lifting work 28
2.6 Safe maintenance 28
2.6.1 Spare parts 28
2.6.2 Heavy parts 28
2.6.3 Regular checks 29
2.7 Modifications to the machine 29
2.7.1 Modifications, add-ons and retrofittings 29
3 Control and operation 31
3.1 Fitting and removing working tool 31
3.1.1 Installing wood grapple with attachment pins 31
3.1.2 Removing wood grapple with attachment pins 33
3.1.3 Installing and removing working tool with quick coupler 34
3.1.4 Retrofitting hold-down chain (option) 34
3.1.5 Installing and removing working tool with quick coupler suspension for
direct installation 34
3.1.6 Adjusting swing brake 45
3.1.7 Checking swing brake for wear 47
3.2 Operation 48
3.2.1 Before putting into service 48
3.2.2 Operating wood grapple 48
3.3 General working methods 50
3.3.1 Tool-protecting working 50
3.3.2 Handling loads 50
3.3.3 Working with the wood grapple 51
3.3.4 Wood grapple without hold-down clamp 53
3.3.5 Wood grapple with hold-down chain 54
3.3.6 Wood grapple with hydraulic hold-down clamp 55
3.3.7 Loading transport vehicle 56
3.4 Transport
3.4.1 Transporting working tool
Maintenance
4.1 Inspection and maintenance schedule
4.2 Fuels, lubricants and operating fluids
4.2.1 Hydraulic oil
4.2.2 Greases
4.3 General maintenance
4.3.1 Depressurising hydraulic lines
4.4 Working attachment
4.4.1 Lubricating wood grapple
4.4.2 Cleaning working tool
4.4.3 Passfix bearings
4.4.4 Checking pin connections for secure seating
4.4.5 Checking steel parts for cracks
4.4.6 Pin bearing: checking for wear
4.4.7 Checking wear of undercut blades, clip-on cutting edges and rollers
4.4.8 Hydraulic hoses: Checking condition
4.4.9 Working attachment: Checking function
4.4.10 Tightening rotary actuator bearing
4.4.11 Storing working tool
Index

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

https://vimeo.com/836186884?share=copy

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

s.m