Linkbelt 300X3 Excavator Service Manual WLSM3006-09LX – PDF DOWNLOAD

Description

Linkbelt 300X3 Excavator Service Manual WLSM3006-09LX – PDF DOWNLOAD

FILE DETAILS:

Linkbelt 300X3 Excavator Service Manual WLSM3006-09LX – PDF DOWNLOAD

Language : English
Pages : 1483
Downloadable : Yes
File Type : PDF
Size: 81.8 MB

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

https://vimeo.com/770387665

DESCRIPTION:

Linkbelt 300X3 Excavator Service Manual WLSM3006-09LX – PDF DOWNLOAD

General Information:
Cleaning
Clean the metal parts with a cleaning fluid or steamer that meets standards. (except for the bearing) After cleaning the parts, let them dry well and inject oil into all parts. Inject oil into the bearing after letting it dry.
Inspection
When disassembling parts, inspect all the parts. Replace any worn or damaged parts. Inspect them thoroughly to prevent early failures.
Bearing
If the bearing is loose, replace it. Install the bearing after air drying it.
Needle bearing
When inserting the needle bearing, be careful not to scratch it.
Inject grease into the location where the needle bearing is to be inserted.
Gear
Check that there is no wear and no damage.

TABLE OF CONTENTS:

Linkbelt 300X3 Excavator Service Manual WLSM3006-09LX – PDF DOWNLOAD

SAFETY 1-1 19389787-1en
SAFETY, GENERAL INFORMATION AND STANDARD TORQUE DATA 1-2 46091226-0en
General Information 1-3 78709558-2en
Standard Torque Data For Cap Screws And Nuts 1-11 85783483-0en
A LOWER 2-1 71777125-1en
Main Equipment Table (300X3) 2-3 97216546-0en
Main Equipment Structure and Operation Explanation 2-5 71646005-0en
Port Diagram 2-18 89929564-0en
Basic Functions 2-20 28190417-0en
Removal and Installation of Track 2-23 60049824-0en
Removal and Installation of Roller 2-28 43752628-0en
Removal and Installation of Drive Sprocket 2-45 86972684-4en
Removal and Installation of Take-up Roller 2-47 58088989-2en
Assembly and Disassembly of Take-up Roller 2-49 47665483-6en
Removal and Installation of Grease Cylinder 2-55 81314949-0en
Assembly and Disassembly of Grease Cylinder 2-57 70823562-4en
Removal and Installation of Center Joint 2-60 78834902-2en
Assembly and Disassembly of Center Joint 2-63 81651562-4en
Removal and Installation of Travel Motor 2-71 30970495-3en
Assembly and Disassembly of Travel Motor 2-76 51874242-3en
Maintenance Standards 2-116 16266917-1en
Pressure Measurement and Adjustment Procedures 2-125 83246188-1en
Drain Volume Measurement Procedures 2-126 72272769-0en
Air Bleed Procedure 2-128 76863098-0en
B C SWING UNIT, COUNTERWEIGHT 3-1 97410031-1en
Main Equipment Table (300X3) 3-2 97216546-0en
Main Equipment Structure and Operation Explanation 3-3 71646005-0en
Port Diagram 3-10 89929564-0en
Basic Functions 3-11 28190417-0en
Removal and Installation of Swing Unit 3-15 61517495-3en
Assembly and Disassembly of Swing Motor 3-18 69583460-5en
Assembly and Disassembly of Swing Unit 3-31 77245471-0en
Assembly and Disassembly of Swing Reduction Gear 3-35 61287321-0en
Removal and Installation of Counterweight 3-49 36870479-1en
Pressure Measurement and Adjustment Procedures 3-51 83246188-1en
Drain Volume Measurement Procedures 3-52 72272769-0en
Air Bleed Procedure 3-53 76863098-0en
H ENGINE 4-1 53979139-1en
Main Equipment Table (300X3) 4-4 97216546-0en
Basic Functions 4-6 28190417-0en
Main Data 4-44 92788314-3en
Function, Structure, and Operations 4-47 27953783-3en
Contents
1
Symptom 4-100 19251071-0en
Functional Inspection 4-113 69663730-0en
Cautions for Maintenance 4-123 38063852-3en
Removal and Installation of Engine Assembly 4-124 45543816-4en
Removal and Installation of Fuel Cooler, Engine Intercooler, Radiator, and Oil
Cooler 4-131
28776642-0en
Removal and Installation of Turbo Charger 4-140 43042560-3en
Removal and Installation of EGR Cooler and EGR Valve 4-142 18789894-0en
Removal and Installation of Engine Hood 4-145 69874792-1en
Removal and Installation of DPD (muffler) 4-147 15457958-2en
Removal and Installation of Cylinder Head Cover 4-148 78412812-0en
Removal and Installation of Cylinder Block 4-193 75278091-0en
Lubrication System 4-244 70203119-0en
Cooling System 4-284 69949934-0en
Removal and Installation of Exhaust Manifold 4-292 78382524-0en
Disassembly, Removal and Installation of DPD Assembly 4-294 96284664-0en
Removal and Installation of Fuel Tank 4-299 38140420-4en
Removal and Installation of Fuel Supply Pump 4-302 18906180-0en
Removal and Installation of Common Rail Assembly 4-306 24718817-0en
Removal and Installation of Injector 4-315 49612614-0en
Removal and Installation of Starter Motor 4-322 71877762-4en
Removal and Installation of Alternator 4-324 13202474-2en
Preheating System 4-325 85293671-0en
Introduction to the trouble diagnosis 4-327 89555165-3en
J HYDRAULIC EQUIPMENT (PUMP, OPERATION SYSTEM VALVE) 5-1 68276312-1en
Main Equipment Table (300X3) 5-4 97216546-0en
Basic Functions 5-8 28190417-0en
Port Diagram 5-23 89929564-0en
Hydraulic Device 5-35 41566527-0en
Main Equipment Structure and Operation Explanation 5-36 71646005-0en
Control Valve 5-45 17724516-0en
5 Stack Solenoid Valve Operation Explanation 5-80 76572215-0en
Upper Pilot Valve (remote control valve) 5-82 25350181-0en
Travel Pilot Valve (remote control valve) 5-87 39613125-0en
Cushion Valve 5-92 11949795-0en
Pressure Bleeding Operations 5-97 80016034-0en
Removal and Installation of Hydraulic Oil Tank 5-98 58805080-2en
Removal and Installation of Hydraulic Pump 5-103 28305902-4en
Removal and Installation of Pump Coupling 5-108 37443920-0en
Removal and Installation of Control Valve 5-111 56415521-2en
Removal and Installation of Pilot Blocs 5-118 46976647-0en
Removal and Installation of Travel Remote Control Valve 5-119 71608263-4en
Removal and Installation of Operation Remote Control Valve 5-122 14130834-4en
Removal and Installation of 5 Stack Solenoid 5-130 33353463-4en
Removal and Installation of Cushion Valve 5-136 65037997-4en
Procedures for Assembly and Disassembly of Hydraulic Pump Main Unit 5-140 59889726-0en
Pump Main Unit Maintenance Standards 5-145 54580195-0en
Contents
2
Procedures for Assembly and Disassembly of Control Valve 5-158 17697175-0en
Procedures for Assembly and Disassembly of Operation Remote Control Valve 5-180 80887250-1en
Procedures for Assembly and Disassembly of Travel Remote Control Valve 5-191 23581849-0en
Assembly and Disassembly of Cushion Valve 5-204 38410900-0en
Pressure Measurement and Adjustment Procedures 5-208 83246188-1en
Hydraulic Pump Flow Measurement Procedures 5-226 62052930-0en
Air Bleed Procedure 5-230 76863098-0en
Hydraulic Equipment Layout 5-231 81702821-0en
Overall view 5-232 13415697-0en
N CAB 6-1 25744330-1en
Removal and Installation of Operator’s Seat 6-2 73057136-4en
Removal and Installation of Cab Assembly 6-3 44037089-5en
Removal and Installation of Wiper 6-8 25113440-4en
Removal and Installation of Cab Front Glass 6-9 51688380-4en
Removal and Installation of Right-side Window Glass 6-11 20957683-1en
Removal and Installation of Door (Upper) Sash Glass 6-16 88900412-1en
Window Lock Adjustment Procedures 6-21 90955407-5en
Tightening torque 6-23 29026121-4en
R ELECTRICAL PARTS 7-1 18400544-1en
Electrical and Engine Functions and Service Support 7-4 83471066-0en
Basic Functions 7-5 28190417-0en
Accessories 7-9 18248122-0en
Battery Disconnect Switch 7-18 41210822-0en
Reset 7-19 54833228-0en
Milli-amp List 7-20 75537064-0en
Safety 7-22 98211632-0en
Service Support 7-25 30914595-0en
Setting 7-58 46403101-0en
Service Monitor 7-70 48309251-0en
Computer Explanation 7-84 21113635-4en
Connection Connector Pin Layout 7-90 81470562-0en
Sequence Circuit Diagram 7-93 95593007-0en
Electrical Equipment Layout Diagram 7-107 68705843-0en
Removal and Installation of Wiper Controller 7-142 51905383-4en
Removal and Installation of Wiper Motor 7-143 27539700-5en
Removal and Installation of Monitor 7-145 71925310-6en
ECM Replacement Procedure 7-147 65037709-1en
Removal and Installation of ECM 7-148 40114235-0en
Removal and Installation of Computer A 7-149 88300195-0en
Removal and Installation of Computer B 7-150 51924239-0en
Air Conditioner Overall Diagram 7-151 70666574-0en
Assembly and Disassembly of Unit 7-192 80491730-0en
Removal and Installation of Compressor 7-195 20570260-4en
Removal and Installation of Condenser 7-196 39773938-0en
Removal and Installation of Receiver Dryer 7-198 41397785-2en
Work Precautions 7-200 23051033-5en

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V