Linkbelt 350X4 350X4 LF Excavator Service Manual WLSM3507-14LX – PDF DOWNLOAD

Description

Linkbelt 350X4 350X4 LF Excavator Service Manual WLSM3507-14LX – PDF DOWNLOAD

FILE DETAILS:

Linkbelt 350X4 350X4 LF Excavator Service Manual WLSM3507-14LX – PDF DOWNLOAD

Language : English
Pages : 2316
Downloadable : Yes
File Type : PDF
Size: 125 MB

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Linkbelt 350X4 350X4 LF Excavator Service Manual WLSM3507-14LX – PDF DOWNLOAD

SAFETY 1-1 19389787-1en
Safety, general information and standard torque data 1-2 38637039-0en
General Information 1-3 78709558-3en
Standard Torque Data For Cap Screws And Nuts 1-10 85783483-0en
Protection of Electric/Electronics System During Charging or Welding 1-11 25067536-0en
A LOWER 2-1 71777125-1en
Main Equipment Table 2-3 78443383-0en
Main Equipment Structure and Operation Explanation 2-5 71646005-0en
Port Diagram 2-32 89929564-0en
Basic Functions 2-34 28190417-0en
Removal and Installation of Track 2-36 60049824-0en
Removal and Installation of Roller 2-41 43752628-0en
Removal and Installation of Drive Sprocket 2-57 86972684-4en
Removal and Installation of Take-up Roller 2-59 58088989-2en
Assembly and Disassembly of Take-up Roller 2-61 95701743-1en
Removal and Installation of Grease Cylinder 2-67 39210976-2en
Assembly and Disassembly of Grease Cylinder 2-69 52822678-1en
Removal and Installation of Center Joint 2-72 58527613-1en
Assembly and Disassembly of Center Joint 2-75 79421034-1en
Removal and Installation of Travel Motor 2-84 30970495-3en
Assembly and Disassembly of Travel Motor 2-89 51874242-3en
Maintenance Standards 2-145 16266917-1en
Pressure Measurement and Adjustment Procedures 2-152 83246188-1en
Drain Volume Measurement Procedures 2-153 72272769-0en
Air Bleed Procedure 2-155 76863098-0en
B C SWING UNIT, COUNTERWEIGHT 3-1 97410031-1en
Main Equipment Table 3-2 78443383-0en
Main Equipment Structure and Operation Explanation 3-3 71646005-0en
Port Diagram 3-11 89929564-0en
Basic Functions 3-12 28190417-0en
Removal and Installation of Swing Unit 3-19 22432214-2en
Assembly and Disassembly of Swing Unit 3-22 77385530-1en
Assembly and Disassembly of Swing Motor 3-25 14574279-1en
Assembly and Disassembly of Swing Reduction Gear 3-40 61287321-0en
Removal and Installation of Counterweight 3-54 36870479-1en
Pressure Measurement and Adjustment Procedures 3-56 83246188-1en
Drain Volume Measurement Procedures 3-57 72272769-0en
Air Bleed Procedure 3-58 76863098-0en
H ENGINE 4-1 53979139-1en
Main Equipment Table 4-7 78443383-0en
Basic Functions 4-9 28190417-0en
Main Data 4-63 20092412-1en
Contents
1
Function, Structure, Operation 4-66 51175846-2en
Function, structure, operation (SCR) 4-127 27929211-1en
SCR Control System Inspection 4-157 78058558-2en
Explanation of SCR Operation 4-158 95238910-2en
Diagnosis for Each Symptom 4-160 21805842-1en
Symptom 4-165 19251071-0en
Functional Inspection 4-177 69663730-0en
Removal and Installation of Engine Assembly 4-185 46997073-2en
Removal and Installation of Fuel Cooler, Engine Intercooler, Radiator, and Oil
Cooler 4-189
28776642-0en
Removal and Installation of Turbo Charger 4-198 43042560-3en
Removal and Installation of EGR Valve (if equipped) 4-203 32547506-1en
Removal and Installation of Engine Hood 4-210 69874792-1en
Removal and Installation of SCR 4-211 45054744-1en
Removal and installation of Silicon Controlled Rectifier Catalyst 4-212 71913988-1en
Removal and Installation of Cylinder Head Cover 4-217 78412812-0en
Removal and Installation of Cylinder Block 4-266 75278091-0en
Lubrication System 4-322 70203119-0en
Cooling System 4-368 69949934-0en
Induction System 4-384 92865729-1en
Exhaust System 4-385 89869774-1en
Aux Emission Control Devices System 4-388 71618698-1en
Removal and Installation of Exhaust Manifold 4-400 78382524-0en
Removal and Installation of Fuel Tank 4-410 28103513-2en
Removal and Installation of Urea Pump 4-414 95313754-0en
Removal and Installation of Urea Solution Tank 4-415 17610219-2en
Removal and Installation of Fuel Supply Pump 4-417 18906180-0en
Removal and Installation of Common Rail Assembly 4-421 24718817-0en
Removal and Installation of Injector 4-433 31274146-0en
Removal and installation of Idle Gear 4-440 88541792-1en
Removal and installation of Inlet Cover 4-481 11202177-1en
Removal and installation of Crankshaft 4-494 37684987-1en
Removal and installation of Piston 4-551 88466996-1en
Removal and installation of Camshaft 4-593 39727464-1en
Removal and installation of Flywheel 4-602 49328546-1en
Removal and installation of Crankshaft Front Oil Seal 4-605 43676697-1en
Removal and installation of Crankshaft Rear Oil Seal 4-610 83352618-1en
Removal and installation of Rocker Arm Shaft 4-614 51224917-1en
Removal and installation of Valve Spring 4-623 79836590-1en
Removal and installation of Valve Stem Oil Seal 4-633 45747030-1en
Removal and installation of Front Cover 4-642 84313582-1en
Removal and installation of Intake Throttle Valve 4-651 59420164-1en
Removal and Installation of Starter Motor 4-652 29382275-1en
Removal and Installation of Alternator 4-661 53939335-1en
Removal and Installation of Glow Plug 4-668 45292928-0en
Removal and Installation of Suction Control Valve 4-670 74896489-0en
Removal and installation of Fuel Filter 4-673 35283611-1en
Removal and installation of Relief Valve 4-676 34135732-1en
Contents
2
Removal and installation of Fuel Filter Element 4-679 28242594-1en
Removal and Installation of Fuel filter pressure 4-683 41943855-1en
Removal and Installation of Engine coolant temperature sensor 4-684 72826315-1en
Removal and Installation of CKP sensor 4-685 92654264-1en
Removal and Installation of CMP sensor 4-686 11296113-1en
Removal and Installation of Oil pressure sensor 4-687 71303987-1en
Removal and installation of Pressure Sensor/Boost Temperature Sensor 4-688 81952792-1en
Removal and Installation of IMT sensor 4-689 42362214-1en
Removal and installation of Charge Air Cooler Temperature Sensor 1 4-690 66306841-1en
Sampling Procedure 4-691 38464543-0en
Removal and Installation of Exhaust gas temperature sensor 4-692 83790917-1en
Removal and installation of EGR Gas Temperature Sensor 1 4-694 79377911-1en
Removal and installation of EGR Gas Temperature Sensor 2 4-695 52797245-1en
Removal and installation of NOx Sensor 4-697 70645643-1en
Removal and Installation of Exhaust gas temperature sensor 3 4-700 10879967-1en
Removal and installation of DEF Sensor 4-701 46935705-1en
Engine-related Diagnostic Trouble Code List 4-702 99630402-3en
Engine-side Trouble 4-711 16577120-0en
Data Reference Values 4-884 49437404-1en
J HYDRAULIC EQUIPMENT (PUMP, OPERATION SYSTEM VALVE) 5-1 68276312-1en
Main Equipment Table 5-5 78443383-0en
Basic Functions 5-12 28190417-0en
Port Diagram 5-34 89929564-0en
Hydraulic Pump 5-47 71826868-0en
Control Valve 5-65 56107455-0en
5 Stack Solenoid Valve Operation Explanation 5-96 87031521-0en
Upper Pilot Valve (remote control valve) 5-97 25350181-0en
Travel Pilot Valve (remote control valve) 5-102 39613125-0en
Cushion Valve 5-108 11949795-0en
Selector Valve (2-way) 5-113 32379090-0en
Direction Valve (3-direction) 5-116 30102944-0en
6 Stack Proportional Valve (Pilot) 5-119 71721153-0en
Electromagnetic Relief Valve 5-121 64662087-0en
Removal and Installation of Hydraulic Reservoir 5-125 78788865-0en
Removal and Installation of Hydraulic Pump 5-129 63383358-0en
Removal and Installation of Pump coupling 5-133 68875889-1en
Removal and Installation of Control Valve 5-135 40568465-2en
Removal and Installation of Travel Remote Control Valve 5-140 89439321-1en
Removal and Installation of Operation Remote Control Valve 5-144 94100775-1en
Installation and Removal of 5 Stack Solenoid Valve 5-152 20298065-0en
Removal and Installation of Cushion Valve 5-154 85137039-1en
Procedures for Assembly and Disassembly of Hydraulic Pump Main Unit 5-157 59889726-0en
Regulator Maintenance Standards 5-162 86103035-0en
Assembly and Disassembly of Control Valve 5-178 72743984-0en
Procedures for Assembly and Disassembly of Operation Remote Control Valve 5-200 80887250-1en
Procedures for Assembly and Disassembly of Travel Remote Control Valve 5-211 23581849-0en
Assembly and Disassembly of Cushion Valve 5-224 38410900-0en
Contents
3
Procedures for Assembly and Disassembly of 6 Stack Proportional Valve (Pilot) 5-228 14101325-0en
Pressure Measurement and Adjustment Procedures 5-234 83246188-1en
Hydraulic Pump Flow Measurement Procedures 5-253 62052930-0en
Air Bleed Procedure 5-257 76863098-0en
Sampling Procedure 5-258 38464543-0en
Hydraulic Equipment Layout 5-259 81702821-0en
Overall View 5-260 18723163-0en
N CAB 6-1 25744330-1en
Removal and Installation of Operator’s Seat 6-2 64020993-1en
Removal and Installation of Cab Assembly 6-3 58647651-2en
Removal and Installation of Wiper 6-8 56260865-1en
Removal and Installation of Cab Front Glass 6-9 85033204-1en
Removal and Installation of Right-side Window Glass 6-11 20957683-1en
Removal and Installation of Door (Upper) Sash Glass 6-16 88900412-1en
Window Lock Adjustment Procedures 6-21 70190809-2en
Removal and Installation of Housing Guardrail 6-23 76560728-0en
Tightening Torque 6-25 46004929-1en
R ELECTRICAL PARTS 7-1 18400544-1en
Basic Functions 7-3 28190417-0en
Service Support 7-29 30914595-0en
Connection Connector Pin Layout 7-150 81470562-0en
Sequence Circuit Diagram 7-152 95593007-0en
Electrical Equipment Layout Diagram 7-166 78861758-0en
Removal and Installation of Wiper Controller 7-203 48783449-1en
Removal and Installation of Wiper Motor 7-204 60222373-1en
Removal and Installation of ECM 7-206 37149170-1en
Removal and Installation of Main Controller 7-207 35550813-0en
Removal and Installation of DCU 7-208 63452717-0en
Removal and Installation of Monitor 7-209 51691250-2en
Removal and Installation of Rear View Camera 7-211 83779341-0en
Removal and Installation of Side Camera (right) 7-212 43100996-0en
Removal and Installation of Side Camera (Left) 7-213 35072143-0en
Removal and Installation of FVM Controller 7-214 75916970-1en
How to Set FVM 7-215 33847448-0en
Air Conditioner Overall Diagram 7-220 70666574-0en
Assembly and Disassembly of Unit 7-259 80491730-0en
Removal and Installation of Compressor 7-262 20570260-4en
Removal and Installation of Condenser 7-263 69203847-0en
Removal and Installation of Receiver Dryer 7-264 76369168-0en
Work Precautions 7-265 23051033-6en
V ATTACHMENTS 8-1 84181484-1en
Main Equipment Table 8-3 78443383-0en
Maintenance Standards 8-4 16266917-1en
Removal and Installation of Bucket Cylinder 8-20 94363778-1en
Removal and Installation of Bucket Cylinder (LF) 8-24 11430438-0en
Removal and Installation of Arm Cylinder 8-27 50905387-2en
Contents
4
Removal and Installation of Arm Cylinder (LF) 8-32 96476679-0en
Removal and Installation of Boom Cylinder 8-36 26434239-1en
Procedures for Operation/Assembly and Disassembly of Hydraulic Cylinder 8-40 71081947-0en
HBCV 8-78 83156430-0en
Port Diagram 8-94 89929564-0en
Air Bleed Procedure 8-95 76863098-0en
Removal and Installation of HBCV 8-97 95886020-0en
Removal and Installation of Arm HBCV 8-98 22060137-1en
Removal and Installation of Boom HBCV 8-100 62819839-1en
Removal and Installation of Bucket 8-103 11050117-1en
Removal and Installation of Bucket Link 8-105 99170709-1en
Removal and Installation of Bucket Link (LF) 8-107 40558142-0en
Removal and Installation of Arm 8-109 68554640-1en
Removal and Installation of Arm (LF) 8-111 34596690-0en
Removal and Installation of Boom 8-113 50501770-0en
Z OTHER 9-1 68145258-1en
Change from Type 6 9-4 58609717-1en
Specifications 9-15 53620175-0en
Specifications (LF) 9-21 55444898-0en
Arm Dimension 9-26 31180251-0en
Main Unit Weight 9-34 12343363-0en
Bolt Size and Torque Table 9-39 30335582-1en
Overall View 9-44 34508823-0en
WORK RANGE DIAGRAM 9-48 20473064-1en
New Machine Performance Judgment Table 9-56 72039816-1en
FLUIDS AND LUBRICANTS 9-69 18850575-0en
Main-Unit-related Diagnostic Trouble Code List 9-70 70292507-3en
Main Unit-side Trouble 9-73 14139955-0en
List of special tools 9-189 95642836-0en
Paint Colors 9-230 69726296-0en
Abbreviation 9-232 40185832-2en
Contents

DESCRIPTION:

Linkbelt 350X4 350X4 LF Excavator Service Manual WLSM3507-14LX – PDF DOWNLOAD

General Information:
Cleaning
Clean the metal parts with a cleaning fluid or steamer that meets standards. (except for the bearing) After cleaning the parts, let them dry well and inject oil into all parts. Inject oil into the bearing after letting it dry.
Inspection
When disassembling parts, inspect all the parts. Replace any worn or damaged parts. Inspect them thoroughly to prevent early failures.
Bearing
If the bearing is loose, replace it. Install the bearing after air drying it.
Needle bearing
When inserting the needle bearing, be careful not to scratch it.
Inject grease into the location where the needle bearing is to be inserted.
Gear
Check for any wear or damage.
Oil seals, O-rings, gaskets
Always install new oil seals, O-rings, and gaskets. Inject grease into the locations where oil seals and O-rings are to be inserted.
Shaft
Check for any wear or damage. Check the oil seal on the bearing and damaged shaft.
Service parts
Install genuine LBX Link-Belt service parts. When ordering parts, see the parts catalog that has genuine LBX Link-Belt part numbers listed. Any failures caused by installing a nongenuine part are not covered by the warranty.
Lubrication (fuel, hydraulic oil)

• Use oils from specified manufacturers or the ones specified in the operator’s manual or Service Manual.
• Any failures caused by using other fuel or hydraulic oil than specified are not covered by the warranty.

Need help? Contact: [email protected]

https://vimeo.com/770172558

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V