-70%

Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD


Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD

CATALOG 648412

$29.95 $98.95

  Happy to Help You :) Any queries / Requests? CLICK HERE to ask!

Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

Manitou MHT 10210 L E3 M Series Operator Manual - PDF DOWNLOAD
Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD
Manitou MHT 10210 L E3 M Series Operator Manual - PDF DOWNLOAD
Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD

DESCRIPTION:

Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD

CATALOG 648412

GENERAL INSTRUCTIONS
A – Driver’s operating instructions.
– Read the operator’s manual carefully, making sure you understand it.
– The operator’s manual must always be kept in the lift truck, in the place provided and in the language understood by the operator.
– Respect the safety notices and instructions given on the lift truck.
– It is compulsory to replace all plates or stickers which are no longer legible or which have become worn or damaged.
B – Authorisation to operate (Or refer to the legislation for each particular country).
– Only qualified personnel may use the lift truck. Its use is subject to authorisation to operate being given by the appropriate manager in the user establishment.
– The user should always carry this authorisation to operate with him while he is using the lift truck.
– The driver is not competent to authorise the driving of the lift truck by another person.
– In addition, the vehicle should be used in accordance with good practice for the profession.
C – Maintenance
– The user must immediately advise his superior if his lift truck is not in good working order or does not comply with the safety notice.
– The operator is prohibited from carrying out any repairs or adjustments himself, unless he has been trained for this purpose. He must keep the lift truck properly cleaned if this is among his responsibilities.
– Carry out daily maintenance (See chapter : A – DAILY OR EVERY 10 HOURS SERVICE in paragraph : 3 – MAINTENANCE).
– Ensure tyres are adapted to the nature of the ground (See area of the contact surface of the tyres in the chapter : CHARACTERISTICS in paragraph : 2 – DESCRIPTION).
THERE ARE:
• SAND tyres.
• LAND tyres.
• Snow chains.

OPERATIING INSTRUCTIONS:

A – Driver’s operating instructions.
– Wear clothes suited for driving the lift truck, avoid loose clothes.
– Never operate the vehicle when hands or feet are wet or soiled with greasy substances.
– For increased comfort, adjust the driver’s seat to your requirements and adopt the correct
position in the driver’s cab.
– The operator must always be in his normal position in the driver’s cab. It is prohibited
to have arms or legs, or generally any part of the body, protruding from the driver’s cab
of the lift truck.
– Always remember to fasten your seat belt and adjust it to your requirements.
– The control units must never in any event be used for any other than their intended
purposes (e.g. climbing onto or down from the lift truck, portmanteau, etc.).
– If the control components are fitted with a forced operation (lever lock) device, it is forbidden
to leave the cab without first putting these controls in neutral.
– Never allow a passenger to travel on the lift truck in the driver’s cab.
B – Before starting the lift truck.
– If the lift truck is new, refer to chapter : BEFORE STARTING UP A NEW LIFT TRUCK
in paragraph : 1 – OPERATING AND SAFETY INSTRUCTIONS.
– Check the condition of the tyres and the tyre pressures (See chapter : CHARACTERISTICS
in paragraph : 2 – DESCRIPTION).
– Before starting the lift truck, check the different levels :
• Engine oil.
• Hydraulic reservoir oil.
• Transmission oil.
• Cooling liquid.
• Brakes fluid.

TABLE OF CONTENTS:

Manitou MHT 10210 L E3 M Series Operator Manual – PDF DOWNLOAD

1 — INSTRUCTIONS
– ORIGINAL REPLACEMENT PARTS AND ATTACHMENTS
– DRIVER’S OPERATING INSTRUCTIONS
– Warning
– General instructions
– Operating instructions
– Handling instructions
– Load handling
– MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
– BEFORE STARTING UP A NEW LIFT TRUCK
2 — DESCRIPTIION
– CHARACTERISTICS
– DIMENSIONS AND LOAD CHARTS
– INSTRUMENTS AND CONTROLS
3 — MAINTENANCE
– FILTERS CARTRIDGES AND BELTS
– LUBRIFICANTS
– SERVICING SCHEDULE
A – Daily or every 10 hours service.
B – Every 50 hours service.
C – Every 250 hours service.
D – Every 500 hours service.
E – Every 1000 hours service.
F – Every 1500 hours service.
G – Occasional maintenance.
4 — SYSTEMS
– ELECTRICAL SYSTEM.
– Electrical system key.
– Electrical system tables.
– HYDRAULIC LAYOUT.
– Movements hydraulic system.
– Steering and brakes hydraulic system.
– Hydrostatic transmission system.
5 — OPTIONAL ACCESSORIES ENVISAGED
– INTRODUCTION.
– General recommendations for use of a lift truck.
– Accessory without hydraulic system and manual locking
– Accessory without hydraulic system and hydraulic locking (optional)
– Accessory with hydraulic system and manual locking (optional)
– Accessory with hydraulic system and hydraulic locking (optional)
– Technical features of accessories.

VIDEO PREVIEW OF THE MANUAL:

PLEASE NOTE:

  • This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
  • Contact us at heydownloadss@gmail.com should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V

General Inquiries

There are no inquiries yet.

0