Manitou MLT 634 -120 LSU Série G-E3 MLT 634 -120 LSU PS Série G-E3 MLT 735 -120 LSU Série 7-E32 Operator’s Manual

Description

Manitou MLT 634 -120 LSU Série G-E3 MLT 634 -120 LSU PS Série G-E3 MLT 735 -120 LSU Série 7-E32 Operator’s Manual – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Manitou MLT 634 -120 LSU Série G-E3 MLT 634 -120 LSU PS Série G-E3 MLT 735 -120 LSU Série 7-E32 Operator’s Manual – PDF DOWNLOAD

647387 EN (18/11/2011)
MLT 634 -120 LSU Série G-E3
MLT 634 -120 LSU PS Série G-E3
MLT 735 -120 LSU Série 7-E3

GENERAL INSTRUCTIONS
A – OPERATOR’S MANUAL
– Read the operator’s manual carefully.
– The operator’s manual must always be in good condition and in the place provided for it on the lift truck.
– You must report any plates and stickers which are no longer legible or which are damaged.
B – AUTHORISATION FOR USE IN FRANCE
(or see current legislation in other countries)
– Only qualified, authorized personnel can use the lift truck. This authorization is given in writing by the appropriate person in the
establishment with respect to the use of lift trucks and must be carried permanently by the operator.
– The operator is not competent to authorise the driving of the lift truck by another person.
C – MAINTENANCE
– The operator must immediately advise his superior if his lift truck is not in good working order or does not comply with the safety
notice.
– The operator is prohibited from carrying out any repairs or adjustments himself, unless he has been trained for this purpose. He must keep
the lift truck properly cleaned if this is among his responsibilities.
– The operator must carry out daily maintenance (see: 3 – MAINTENANCE: A – DAILY OR EVERY 10 HOURS SERVICE).
– The operator must ensure tyres are adapted to the nature of the ground (see area of the contact surface of the tyres in the chapter: 2
– DESCRIPTION: FRONT AND REAR TYRES). There are optional solutions, consult your dealer.
. SAND tyres.
. LAND tyres.
. Snow chains.

TABLE OF CONTENTS:

Manitou MLT 634 -120 LSU Série G-E3 MLT 634 -120 LSU PS Série G-E3 MLT 735 -120 LSU Série 7-E32 Operator’s Manual – PDF DOWNLOAD

INSTRUCTIONS TO THE COMPANY MANAGER
THE SITE
THE OPERATOR
THE LIFT TRUCK
A – THE LIFT TRUCK’S SUITABILITY FOR THE JOB
B – ADAPTATION OF THE LIFT TRUCK TO STANDARD ENVIRONMENTAL CONDITIONS
C – MODIFICATION OF THE LIFT TRUCK
D – FRENCH ROAD TRAFFIC RULES (or see current legislation in other countries)
THE INSTRUCTIONS
THE MAINTENANCE
INSTRUCTIONS FOR THE OPERATOR
PREAMBULE
GENERAL INSTRUCTIONS
A – OPERATOR’S MANUAL
B – AUTHORIZATION FOR USE IN FRANCE (or see current legislation in other countries)
C – MAINTENANCE
D – MODIFICATION OF THE LIFT TRUCK
E – LIFTING PEOPLE
OPERATING INSTRUCTIONS UNLADEN AND LADEN
A – BEFORE STARTING THE LIFT TRUCK
B – DRIVER’S OPERATING INSTRUCTIONS
C – ENVIRONMENT
D – VISIBILITY
E – STARTING THE LIFT TRUCK
F – DRIVING THE LIFT TRUCK
G – STOPPING THE LIFT TRUCK
H – DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAY (or see current legislation in other countries)
INSTRUCTIONS FOR HANDLING A LOAD
A – CHOICE OF ATTACHMENTS
B – MASS OF LOAD AND CENTRE OF GRAVITY
C – LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
D – TRANSVERSE ATTITUDE OF THE LIFT TRUCK
E – TAKING UP A LOAD ON THE GROUND
F – TAKING UP AND LAYING A HIGH LOAD ON TYRES
G – TAKING UP AND LAYING A HIGH LOAD ON STABILIZERS
H – TAKING UP AND LAYING DOWN A SUSPENDED LOAD
I – TRAVELLING WITH A SUSPENDED LOAD
PLATFORM OPERATING INSTRUCTIONS
A – AUTHORISATION FOR USE
B – SUITABILITY OF THE PLATFORM FOR THE JOB
C – PRECAUTIONS WHEN USING THE PLATFORM
D – USING THE PLATFORM
E – ENVIRONMENT
F – MAINTENANCE
INSTRUCTIONS FOR USING THE RADIO-CONTROL
MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
GENERAL INSTRUCTIONS
PLACING THE JIB SAFETY WEDGE
MAINTENANCE
LUBRICANT AND FUEL LEVELS
HYDRAULIC
ELECTRICITY
WELDING
WASHING THE LIFT TRUCK
IF THE LIFT TRUCK IS NOT TO BE USED FOR A LONG TIME
INTRODUCTION
PREPARING THE LIFT TRUCK
PROTECTING THE I.C. ENGINE
PROTECTING THE LIFT TRUCK
BRINGING THE LIFT TRUCK BACK INTO SERVICE
« EC» DECLARATION OF CONFORMITY 2-4
SAFETY PLATES AND STICKERS 2-6
IDENTIFICATION OF THE LIFT TRUCK 2-10
CHARACTERISTICS MLT 634 -120 LSU Série G-E3 2-12
CHARACTERISTICS MLT 634 -120 LSU PS Série G-E3 2-14
CHARACTERISTICS MLT 735 -120 LSU Série 7-E3 2-16
FRONT AND REAR TIRES 2-18
DIMENSIONS AND LOAD CHART MLT 634 -120 LSU Série G-E3 MLT 634 -120 LSU PS Série G-E3 2-20
DIMENSIONS AND LOAD CHART MLT 735 -120 LSU Série 7-E3 2-22
INSTRUMENTS AND CONTROLS 2-24
TOWING PIN AND HOOK 2-48
DESCRIPTION AND USE OF THE OPTIONS
MANITOU ORIGINAL SPARE PARTS AND EQUIPMENT 3-4
START-UP CHECKLIST 3-5
FILTERS CARTRIDGES AND BELTS 3-6
LUBRICANTS AND FUEL 3-8
SERVICING SCHEDULE 3-10
A – DAILY OR EVERY 10 HOURS SERVICE 3-12
B – EVERY 50 HOURS SERVICE 3-18
C – EVERY 250 HOURS SERVICE 3-22
D – EVERY 500 HOURS SERVICE 3-24
E – EVERY 1000 HOURS SERVICE 3-30
F – EVERY 2000 HOURS SERVICE 3-36
G – OCCASIONAL MAINTENANCE
INTRODUCTION 4-5
PICKING UP THE ATTACHMENTS 4-6
TECHNICAL SPECIFICATIONS OF ATTACHMENTS 4-8
ATTACHMENT SHIELDS 4-16

MANITOU MLT 634 -120 LSU SéRIE G-E3 MLT 634 -120 LSU PS SéRIE G-E3 MLT 735 -120 LSU SéRIE 7-E32 OPERATOR’S MANUAL:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V