Manitou MRT1432 400° M SERIES E-2 Operator Manual – PDF DOWNLOAD
DESCRIPTION:
Manitou MRT1432 400° M SERIES E-2 Operator Manual – PDF DOWNLOAD
MRT1432
400°
M SERIES E-2
3B6 SERIES INSTRUMENTS
S/N: 411048 AND BELOW
CATALOG 648226AS
ROUGH TERRAIN FORKLIFT TRUCK GENERAL SAFETY STANDARDS
STUDY THE OPERATOR/SERVICE MANUALS:
- The information in this manual provides general instructions for the safe operation and maintenance of your forklift truck. This information is vital and must be clearly understood by the operator and serviceman. Study this manual and the Rough Terrain Forklift Safety Manual (part no. 422494) thoroughly and carefully before operating or servicing your forklift.
- Contact your dealer or Manitou North America, Inc. if you have any questions concerning your forklift, its operation, service or parts. Keep both manuals in the literature box on the forklift available for reference. If either manual becomes illegible or is missing, contact your dealer for replacements immediately. This manual cannot cover every situation that might result in an accident. It is the responsibility of the operator to always remain alert for potential hazards and be prepared to avoid them!
ADDITIONAL RECOMMENDED LITERATURE:
ANSI / ITSDF B56.6 is the national consensus standard for rough terrain forklift trucks. It contains rules about forklift safety, maintenance, safe operation, training, and supervision. Forklift owners should learn this standard and make it available for their operators, service personnel, and supervisors. These standards can be obtained, free of charge, from the Industrial Truck Standards Development Foundation (ITSDF) on their website at www.itsdf.org. The following references are examples from the standard, addressing forklift operators:
A.) OPERATOR TRAINING QUALIFICATIONS
1.) The user shall ensure that operators understand that safe operation is the operator’s responsibility. The user shall ensure that operators are knowledgeable of, and observe, all safety rules and practices.
2.) Create an effective operator training program centered around user company’s policies, operating conditions, and rough terrain forklift trucks. The program should be presented completely to all new operators and not be condensed for those claiming previous experience.
3.) Information on operator training is available from several sources, including rough terrain forklift truck manufacturers, users, government agencies, etc.
4.) An operator training program should consist of the following:
a.) careful selection of the operator, considering physical qualifications, job attitude, and aptitude;
b.) emphasis on safety of stock, equipment, operator, and other personnel;
c.) citing of rules and why they were formulated;
d.) basic fundamentals of rough terrain forklift truck and component design as related to safety, e.g., in.-lb (N-m) loading, mechanical limitations, center of gravity, stability, etc.;
e.) introduction to equipment, control locations, and functions. Explain how they work when used properly and problems when used improperly.
f.) supervise practice on operating course remote from normal activity and designed to simulate actual operations, e.g., lumber stacking, elevating shingles to the roof, etc.;
g.) oral, written, and operational performance tests and evaluations during and at completion of the course;
h.) refresher courses, which may be condensed versions of the primary course, and periodic “on job” operator evaluation;
i.) understanding of nameplate data and operator instructions and warning information appearing on the rough terrain forklift truck.
TABLE OF CONTENTS:
Manitou MRT1432 400° M SERIES E-2 Operator Manual – PDF DOWNLOAD
1 — IINSTRUCTIIONS
– Original replacement parts and
attachments.
– Driver’s operating instructions.
– Warning
– General instructions.
– Operating instructions.
– Handling instructions.
– Load handling.
– Maintenance instructions of the lift
truck.
– Before starting up a new lift truck.
2 — DESCRIIPTIION
– Characteristics.
– Dimensions and load charts.
– Instruments and controls.
3 — MAIINTENANCE
– Filters cartridges and belts.
– Lubrificants.
– Servicing schedule.
A – Daily or every 10 hours service.
B – Every 50 hours service.
C – Every 250 hours service.
D – Every 500 hours service.
E – Every 1000 hours service.
F – Every 2000 hours service.
G – Every 5000 hours service.
H – Occasional maintenance.
4 — SYSTEMS
– Electrical system.
– Key to electrical system.
– Electrical system tables.
– Hydraulic system.
– Key to moviment hydraulic system.
– Key to brake/steering hydraulic
system.
– Key to transmission hydraulic
system.
– Maintenance handbook
5 — ADAPTABLE ATTACH–
MENTS IIN OPTIION ON
THE RANGE
– Introduction.
– General recommendations for use of
a lift truck.
– How to mount the accessory with
manual lock
– How to mount the accessory with
hydraulic lock(optional).
– Technical specifications and load
charts of attachments
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V