Manitou MXT 840 Lift Truck Operator Manual 53109859EN – PDF DOWNLOAD
$89.95 Original price was: $89.95.$21.95Current price is: $21.95.
Manitou MXT 840 Lift Truck Operator Manual 53109859EN – PDF DOWNLOAD
Description
Manitou MXT 840 Lift Truck Operator Manual 53109859EN – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:
Manitou MXT 840 Lift Truck Operator Manual 53109859EN – PDF DOWNLOAD
FOREWORD:
–Only the operations and manoeuvres described in these operator’s manual must be performed. The manufacturer cannot
predict all possible risky situations. Consequently, the safety instructions given in the operator’s manual and on the lift
truck itself are not exhaustive.
–At any time, as an operator, you must envisage, within reason, the possible risk to yourself, to others or to the lift truck
itself when you use it.
GENERAL INSTRUCTIONS:
A – OPERATOR’S MANUAL
–Read the operator’s manual carefully.
–The operator’s manual must always be in good condition and in the place provided for it on the lift truck.
–You must report any plates and stickers which are no longer legible or which are damaged.
B- MAINTENANCE
–The operator must immediately advise his superior if his lift truck is not in good working order or does not comply with
the safety notice.
–The operator is prohibited from carrying out any repairs or adjustments himself, unless he has been trained for this
purpose. He must keep the lift truck properly cleaned if this is among his responsibilities.
–The operator must carry out daily maintenance (ο
MAINTENANCE).
–The operator must ensure tyres are suitable for the nature of the ground (see contact surface with the ground for the
tyres in the Chapter: 2 – DESCRIPTION: TYRES).
TABLE OF CONTENTS:
Manitou MXT 840 Lift Truck Operator Manual 53109859EN – PDF DOWNLOAD
1 – OPERATING AND SAFETY INSTRUCTIONS 5
INSTRUCTIONS TO THE COMPANY MANAGER 10
THE SITE 10
THE OPERATOR 10
THE LIFT TRUCK 10
A – SUITABILITY OF THE LIFT TRUCK FOR THE JOB 10
B – ADAPTATION OF THE LIFT TRUCK TO STANDARD ENVIRONMENTAL CONDITIONS 10
INSTRUCTIONS FOR THE OPERATOR 11
FOREWORD 11
GENERAL INSTRUCTIONS 11
A – OPERATOR’S MANUAL 11
B- MAINTENANCE 11
C – MODIFICATION OF THE LIFT TRUCK 11
D- LIFTING PEOPLE 11
OPERATING INSTRUCTIONS UNLADEN AND LADEN 12
A – BEFORE STARTING THE LIFT TRUCK 12
B – AVAILABLE IN THE DRIVERβS CAB 12
C – ENVIRONMENT 12
D – VISIBILITY 13
E – STARTING THE LIFT TRUCK 14
F – DRIVING THE LIFT TRUCK 14
G – STOPPING THE LIFT TRUCK 15
INSTRUCTIONS FOR HANDLING A LOAD 17
A – CHOICE OF ATTACHMENTS 17
B – WEIGHT OF LOAD AND CENTRE OF GRAVITY 17
C – LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE 17
D – TRANSVERSE ATTITUDE OF THE LIFT TRUCK 18
E – PICKING UP A LOAD ON THE GROUND 18
F – PICKING UP AND PUTTING DOWN A HIGH LOAD ON TYRES 19
G – PICKING UP AND PUTTING DOWN A SUSPENDED LOAD 21
H – TRAVELLING WITH A SUSPENDED LOAD 21
INSTRUCTIONS FOR USE AS A LOADER 22
A – LOADING 22
B – BACKFILLING 22
LIFT TRUCK MAINTENANCE INSTRUCTIONS 23
GENERAL INSTRUCTIONS 23
PLACING THE BOOM SAFETY WEDGE 23
FITTING THE WEDGE 23
REMOVING THE WEDGE 23
MAINTENANCE 23
MAINTENANCE LOGBOOK 23
LUBRICANT AND FUEL LEVELS 24
HYDRAULICS 24
ELECTRICITY 24
WELDING 24
WASHING THE LIFT TRUCK 24
TRANSPORTING THE LIFT TRUCK 24
IF THE LIFT TRUCK IS NOT GOING TO BE USED FOR A LONG TIME 25
INTRODUCTION 25
PREPARING THE LIFT TRUCK 25
DEF (Diesel Exhaust Fluid) TANK 25
PROTECTING THE ENGINE 25
PROTECTING THE LIFT TRUCK 25
LIFT TRUCK DISPOSAL 26
RECYCLING OF MATERIALS 26
METALS 26
PLASTICS 26
RUBBER 26
GLASS 26
ENVIRONMENTAL PROTECTION 26
WORN OR DAMAGED PARTS 26
USED OIL 26
USED BATTERIES 26
BRINGING THE LIFT TRUCK BACK INTO SERVICE 26
2 – DESCRIPTION 28
IDENTIFICATION OF THE LIFT TRUCK 30
CHARACTERISTICS 32
DIMENSIONS AND LOAD CHARTS 35
VISIBILITY 37
INSTRUMENTS AND CONTROLS 38
DESCRIPTION AND USE OF THE OPTIONS 50
3 – MAINTENANCE 52
ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT 54
FORKLIFT TRUCK MAINTENANCE 54
MANDATORY FIRST 500 HOURS OR 6 MONTHS SERVICE 0
FILTERS CARTRIDGES AND BELTS 0
LUBRICANTS AND FUEL 0
Γ 10 H – DAILY SERVICING OR EVERY 10 HOURS OF SERVICE 62
Γ 50 H – WEEKLY MAINTENANCE OR EVERY 50β―HOURS OF SERVICE 64
ΓΒ 500 H – ROUTINE SERVICING – EVERY 500β―HOURS OF SERVICE OR 1 YEAR 71
ΓΒ 1000 H – ROUTINE SERVICING – EVERY 1000 HOURS OF SERVICE OR 2 YEARS 73
ΓΒ 2000 H – ROUTINE SERVICING – EVERY 2000 HOURS OF SERVICE OR 4 YEARS 0
Γ OCCASIONAL MAINTENANCE 80
4 – OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE 85
INTRODUCTION 87
PICKING UP THE ATTACHMENTS 88
TECHNICAL SPECIFICATIONS OF ATTACHMENTS 89
Need help? Contact: [email protected]
https://vimeo.com/737447558
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us atΒ [email protected]Β should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V
What Our Customers Say
π Related Products
Discover more professional manuals for your equipment

Manitou MRT 1850 PLUS-E3 MRT 2150 PLUS-E3 MRT 2540 PLUS-E3 Operator's Manual - PDF DOWNLOAD

Manitou MHT10160 M Series E3 Operator Service Manual - PDF DOWNLOAD

Manitou MRT2150 M Series E-2 3B6 Series Instruments Operator's Manual - PDF DOWNLOAD
