Massey Ferguson 6400 Series 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 Dyna-6 Operator Manual

Description

Massey Ferguson 6400 Series 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 Dyna-6 Operator Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson 6400 Series 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 Dyna-6 Operator Manual – PDF DOWNLOAD

For 4-cylinder models: 6445-6455-6460-6470 Dynashift and Dупа-6
6-cylinder: 6465-6475-6480 Dynashift and Dупа-6
6-cylinder: 6485-6490-6495 Dynashift

INTRODUCTION :

• The Safety chapter in the Operator lnstruction Book stresses certain basic safety-related situations which may Ье encountered during the operation and normal servicing of the tractor and gives the information needed to соре with these situations. This chapter SUPPLEMENTS any safety instructions given in other chapters of this book. lt may Ье necessary to take additional precautions depending on the equipment used and the working conditions on the site ог in the servicing агеа. AGCO can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication ог servicing of the tractor. lt is therefore YOUR responsibility to take suitaЫe safety measures in such areas. NOTE: This book is puЬ/ished and distributed worldwide and the availabllity of the equipment indicated, whether оп the basic tractor ог as accessories, тау vary according to the country in which the tractor is used.
• То find out which equipment is availaЬ/e in а given region, contact ап AGCO dealer. The purpose of this book is to allow the owner and the operator to run the tractor safely. Providing they follow the instructions carefully, the tractor will орегаtе for many years in the AGCO tradition. Commissioning the equipment at the user’s Ьу the dealer provides the possibility of ensuring that these operating and servicing instructions аге properly understood. Always consult the dealer if any part of this book is not understood. lt is important for these instructions to Ье understood and followed. Daily maintenance should become а routine and а log book of operating hours should Ье kept. When new spare parts аге required, it is important to use AGCO original spare parts only. AGCO dealers supply only genuine original parts and can give advice concerning their fitting and use. The use of parts of lower quality may cause serious damage. Customers аге advised to only purchase their spare parts from an approved AGCO dealer.
• Due to the consideraЫe differences in operating conditions, it is not possiЫe for the manufacturer to formulate complete ог absolute assertions in its puЬlications concerning the performance ог operating methods of its machines ог accept liability for any loss ог damage which may result from such assertions ог possiЫe errors ог omissions. То prevent the warranty becoming void, you should consult your AGCO dealer to oЬtain special instructions if the tractor is to Ье used under abnormal conditions which could Ье detrimental to it (use in deep water ог in paddy fields for instance}. These tractors аге only designed for usual farming purposes (designed use}. Any other use is considered as being contrary to the designed use. AGCO declines all liability in cases of physical damage ог injuries resulting from improper use the consequences of which shall Ье borne Ьу the user alone.
• The conformity and strict adherence to the operating, servicing and repair requirements specified Ьу AGCO аге also essential factors for designed use. 6400 ЕАМЕ These tractors must only Ье used, serviced and repaired Ьу personnel having full knowledge of their specific features and who аге aware of the applicaЫe safety rules (prevention of accidents}. Customers аге strongly recommended to contact an AGCO dealer in the event of after-sale proЫems and for any adjustments which may Ье necessary.

Pre-delivery inspection, commissioning at the user’s premises and warranty :

• When selling new products to their dealers, the manufacturer gives а warranty which, subject to certain conditions, guarantees that the goods аге free from defects in material and workmanship. Since this book is puЬlished worldwide, it is impossiЫe to detail the exact terms and conditions of warranty that apply to а retail customer in any particular country.
• Purchasers of new AGCO equipment should request full details from their supplying Dealer. ln accordance with the Corporation’s policy of continuous improvement to its products, alterations in the specifications of machines may Ье made at any time without notice. The Corporation disclaims all liability for discrepancies which may occur between the specifications of its products and the descriptions thereof contained in its puЬlications.
• А Dealer is required to саггу out certain activities when supplying а new AGCO tractor. These consist of а full pre-delivery inspection to ensure that the tractor supplied is ready for immediate use, and full instructions to the user in the basic principles of operation and servicing of the tractor. These instructions will cover instruments and controls, and routine servicing and safety precautions. AII persons who will Ье concerned with the operation and servicing of the tractor should Ье present for these instructions.

TABLE OF CONTENTS:

Massey Ferguson 6400 Series 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 Dyna-6 Operator Manual – PDF DOWNLOAD

Chapter 1
TRACTOR IDENTIFICATION
Chapter 2
INTRODUCTION – SAFEТV INSTRUCTIONS AND WARRANТV
Chapter 3
INSTRUMENTS AND CONTROLS
Chapter4
OPERATION
Chapter 5
MAINTENANCE AND ADJUSTMENTS
Chapter 6
SPECIFICA TIONS
Chapter 7
ACCESSORIES AND OPTIONS
Appendix
CONVERSION Т ABLES
Index

MASSEY FERGUSON 6400 SERIES 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 DYNA-6 OPERATOR MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V