Massey Ferguson EU Harvesting 9520 9530 Rotary Combine Service Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Harvesting 9520 9530 Rotary Combine Service Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Harvesting 9520 9530 Rotary Combine Service Manual – PDF DOWNLOAD

Part. No : 4283446M2

Safety Signs:

Keep signs clean by wiping off regularly. Use a cleaning solution if necessary. If parts have been replaced or a used machine has been purchased, make sure all safety signs are in the correct location and can be read. See Safety Sign Location in this section for illustrations. Replace any safety signs that can not be read or are missing. Clean the machine surface thoroughly with a cleaning solution before replacing signs. Replacement safety signs are available from your dealer.

A WORD TO THE OPERATOR:

• Study the features in this manual and make them a working part of your safety program. Keep in mind that this safety section is written only for this type of machine. Practice all other usual and customary safe working precautions, and above all REMEMBER – SAFETY IS YOUR RESPONSIBILITY. YOU CAN PREVENT SERIOUS INJURY OR DEATH.
• This safety section is intended to point out some of the basic safety situations that may be encountered during FIG. 3 the normal operation and maintenance of your machine. This section also suggests possible ways of dealing with these situations. This section is NOT a replacement for other safety practices featured in other sections of this manual.
• Personal injury or death may result if these precautions are not followed. Learn how to operate the machine and how to use the controls properly. Do not let anyone operate the machine without instruction and training. For your personal safety and the personal safety of others, follow all safety precautions and instructions found in the manuals and on safety signs affixed to the machine and all attachments. Use only approved attachments and equipment.

TABLE OF CONTENTS:

Massey Ferguson EU Harvesting 9520 9530 Rotary Combine Service Manual – PDF DOWNLOAD

GENERAL INFORMATION 01
SPECIFICATIONS 02
ENGINE WORKSHOP MANUAL 03A
ENGINE – DRIVES, COOLING AND FUEL 03B
MATERIAL HANDLING 04
MATERIAL DISCHARGE 05
REAR AXLE 06
THRESHING AND SEPARATING 07
FRONT AXLE 08
HYDRAULICS 09
CAB AND HVAC 10
WIRING DIAGRAMS 11A
ELECTRICAL 11 B
DIAGNOSTICS 12
GRAIN HEADER INSERT 13
CORN HEADER INSERT 14
DRAPER HEADER INSERT 15

SAFETY
Rotary Combine
SERVICE MANUAL
4283446M2
01 – General Information
Contents
Contents
Safety Alert Symbol 01-1
Safety Messages 01-1
Informational Messages 01-1
Safety Signs 01-2
A Word To The Operator 01-3
Operator Manual 01-4
Prepare For Operation 01-4
Operation 01-5
General Information 01-5
PPE (Personal Protection Equipment) 01-6
Seat Instructions 01-7
Shield and Guards 01-7
Exhaust Warning 01-8
Flying Debris 01-8
Handrails 01-8
Travel On Public Roads 01-9
Maintenance 01-10
General Information 01-10
Fire Prevention and First Aid 01-12
Checking for High Pressure Leaks 01-13
Engine Safety 01-13
Adding Fuel 01-15
Diesel Exhaust Fluid Safety 01-15
Battery Safety 01-16
Tire Safety 01-16
Accumulator Safety 01-17
Safety Equipment 01-17
Hazard Lamps 01-17
Beacon Lamps 01-17
Backup Alarm 01-18
Parking Brake 01-18
Fire Extinguisher 01-18
Header Lift Cylinder Stop 01-18
GENERAL INFORMATION
Machine Main Components 01-19
How A Combine Works 01-20
Cutting and Feeding 01-20
Threshing and Separating 01-20
Cleaning 01-21
Combine Identification 01-22
Serial Number Plate Location 01-22
4283446M2 01-i
Contents
Serial Number Definition 01-24
Headers 01-25
Disposal 01-25
Disposal of Waste 01-25
Disposal of Machine 01-25
Lubrication and Maintenance 01-26
Lubricants 01-26
Service Procedures 01-26
Lubricating and Maintaining the Combine 01-27
Lubrication and Maintenance Charts 01-28
New Machine 01-28
10 Hours or Daily 01-28
50 Hours or Weekly 01-29
Every 100 Hours or Monthly 01-30
Every 250 Hours 01-31
Every 500 Hours 01-31
Every 1000 hours 01-32
Every 1200 Hours 01-32
Grease Fitting Locations 01-33
Left-hand Side of Combine 01-33
Right-hand Side of Combine 01-37
Auto Lube 01-43
Auto Lube Intervals 01-44
Auto Lube Diagnosis 01-46
Engine Platform 01-47
Engine Platform Ladder 01-47
Engine Compartment 01-50
Engine 01-51
Type of Engine Oil 01-51
Oil Additives 01-51
Checking Oil Level 01-51
Changing Engine Oil and Filters 01-52
Fuel System 01-53
Fuel Vent Breather 01-53
Engine Fuel Filter 01-54
Selective Catalytic Reduction System 01-57
Diesel Exhaust Fluid Filter 01-58
Draining the DEF storage tank and Metering Module 01-59
Engine Air Cleaner 01-59
Outer Filter Element 01-60
Inner Filter Element 01-60
Engine Cooling System 01-61
Coolant System Monitoring 01-61
Monitor Warnings 01-61
Anti-Freeze Type 01-61
Coolant Change Period 01-61
Engine Cooling System Coolant 01-62
Checking Coolant Level 01-62
Radiator 01-62
Thermostat 01-63
Draining System 01-63
Filling System 01-64
Rotor Gearbox 01-64
Transmission 01-65
Checking and Changing Lubricant 01-65
Brakes 01-66
Master Cylinder Oil Reservoir 01-66
Bleeding Brake System 01-66
Final Drive 01-67
Tires and Wheels 01-68
Tire Pressure 01-68
Dual Tires 01-68
Maintenance of Tires 01-68
01-ii 4283446M2
Contents
Removing Wheel from Combine 01-69
Wheel Installation 01-70
Tire Dimensions 01-71
Drive Belts 01-72
Banded Drive Belt 01-72
Maintenance of Belts 01-73
Belt Changing Guides 01-74
Belt Sheave Alignment 01-76
Belt Run In Procedure 01-76
Belt Troubleshooting 01-77
Belt Problem and Wear Guide 01-77
Roller Chains 01-91
Inspection of Drive Chains and Sprockets 01-91
Care of Chains 01-91
Drive Chain Adjustment and Tightening 01-92
Drive Chain Sprocket and Idler Alignment 01-93
Drive Chain Elongation and Sprocket Wear 01-94
Normal Tooth Wear 01-95
Not Normal Tooth Wear 01-95
Worn Chain on New Sprockets 01-95
Drive Chain Service Tips 01-96
Chain Replacement 01-97
Cleaning and Lubricating Chains 01-98
Drive Chain Lubrication 01-99
Drive Chain Lubricants 01-99
Good Drive Chain Lubrication 01-100
Roller Chain Drive Troubleshooting Guide 01-101
Speed of Components 01-104
Drives Listing and Specifications 01-105
Hydraulics 01-107
General 01-107
Checking Oil Level 01-108
Hydraulic Oil Filter 01-108
Changing Hydraulic Oil 01-109
Removing Air From Hydraulic System 01-112
Hydraulic Pump 01-113
Steering Priority Valve 01-114
Main Hydraulic Control Valve 01-114
Unloader Auger Engagement Valve 01-116
Hydraulic Oil Cooler 01-116
Air Conditioning System 01-117
Compressor 01-117
Condenser 01-118
Receiver-Drier 01-118
Cab Filters 01-118
Cab Filter – Primary 01-119
Cab Filter – Secondary 01-119
Recirculation Filter 01-120
Air Filter Cleaning Procedure 01-120
Windshield Washer Reservoir 01-121
Cleaning Windshield 01-121
Storage Preparation 01-122
Combine 01-122
Engine 01-122
Preparation For Use After Storage 01-123
Combine 01-123
Engine 01-123
Emissions Warranty 01-124
Torque Charts 01-131
Standard Bolt Markings and Torque Values 01-131
Metric Capscrew Markings and Torque Values 01-132
Special Torque Requirement 01-133
Metric Conversions 01-136
4283446M2 01-iii
Contents
Fractions, Decimals, and Millimeters Conversion Chart 01-137
Decimal Equivalents of 8ths, 16ths, 32nds, and 64ths 01-142
Decimal Equivalents Of Letter Size Drills 01-143
Decimal Equivalents of Number Size Drills 01-144
Tap Drill Sizes – S A E & Metric 01-146
American Standard Pipe Thread and Tap Drill Sizes 01-150
Electrical Formulas 01-150
Amperes (Current Flow) 01-150
Volts {Electromotive Force) 01-150
Ohms (Resistance) 01-151
Watts 01-151
Horsepower 01-151
Belt Speed Calculation Formulas 01-151
Geometrical Formulas 01-151
Circumference of a Circle 01-151
Area of a Circle 01-151
Volume of a Cylinder 01-151
Volume of a Sphere 01-151
Area of a Triangle 01-151
Metric to Imperial and Imperial to Metric Conversion Factors 01-152
Measures of Temperature 01-152
Measures of Power 01-152
Measures of Pressure 01-152
Measures of Length 01-152
Measures of Area 01-153
Measures of Volume (Dry) 01-153
Measures of Volume (Liquid) 01-154
Measures of Mass (Weight) 01-155
Measures of Effort (Torque) 01-155
Reference Tables 01-156
INDEX 01-159

MASSEY FERGUSON EU HARVESTING 9520 9530 ROTARY COMBINE SERVICE MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V