Massey Ferguson EU Harvesting MF7245S MF7245S AL MF7247S MF7247S AL Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Harvesting MF7245S MF7245S AL MF7247S MF7247S AL Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Harvesting MF7245S MF7245S AL MF7247S MF7247S AL Operator’s Manual – PDF DOWNLOAD

MF 7245 S from serial No. 258110025
MF 7245 SAL from serial No. 268110037
MF 7247 S from serial No. 318210041
MF 7247 SAL from serial No. 565810001

INTRODUCTION:

Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground. This Operator’s Manual contains all the necessary practical information on the operation, adjustment and maintenance of your new machine and should be used as a practical reference guide. The combine is designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition.

• To keep the combine in perfect condition and to ensure trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals. Before operating or driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules.
• Always keep this manual on hand for further reference. The terms “left” and “right” are always used with reference to the travelling direction. Should you require further information about the machine, please do not hesitate to contact your authorised Dealer. Your Dealer provides specially trained personnel, genuine quality spare parts and the required tools to solve any problems that may arise.

OPTIONAL EQUIPMENT :

The machine has been designed to operate in a wide variety of crops and conditions. However, in certain cases it may be necessary to fit additional accessories to improve machine performance and adapt the machine to special crops or harvesting conditions. A list of available accessories is pro- vided in the section “Optional Equipment”.

SPARE PARTS AND ACCESSORIES :

The genuine spare parts and accessories have been specifically designed for this type of machine. Only genuine parts supplied by your authorised Dealer can guarantee correct operation and opti- mum performance. Never use non—genuine spare parts or accessories: Some accessories (e.g. PTO shafts, straw chop- pers, tables) require a CE certification, which can be provided only by the manufacturer or his quali- fied and recognised sub—suppliers. Non-genuine spare parts have not been tested and are not authorised by the manufacturer. The fitting and/or use of such equipment may have a damag— ing effect on the design features of the machine and jeopardise operational safety.

TABLE OF CONTENTS:

Massey Ferguson EU Harvesting MF7245S MF7245S AL MF7247S MF7247S AL Operator’s Manual – PDF DOWNLOAD

1 GENERAL INFORMATION
Customer information 1 -1
Appropriate use of the combine 1 -3
Combine identification 1 -4
Ecology: information for the prevention of environmental pollution 1-10
Safety 1 -11
Emergency exit 1-33
Safety devices 1 -34
Noise level in the cab 1 -42
Fire resistance inside the cab 1 -42
Statutory regulations 1 -42
Vibrations in the cab 1 -43
Hydraulic systems: hoses 1 -43
Scrapping and disposal 1 -44
Electromagnetic emissions 1 -44
Notes for road transport 1 -45
Weight distribution 1 -47
2 OPERATION
Crop processing 2 -1
3 CONTROLS AND INSTRUMENTS
Steering column and control pedals 3 -1
Multifunction lever 3 -2
Front control panel 3 -4
Rear control panel ( S models) 3 -5
Rear control panel (S AL models) 3 -6
Agritronicplus 3-17
Cab 3 -40
Access to combine components 3 -46
Engine: starting 3 -49
Stopping the engine 3 -51
Driving the combine 3 -52
Operations to be carried out before road transport 3 -52
Before using the combine 3 -54
Towing the combine 3 -54
4 FIELD OPERATIONS
General Information 4 -1
Starting and Stopping the Combine 4 -2
Cutting table 4 -3
Main Crop Elevator 4 -11
Cylinder Housing 4 -15
Concave 4 -16
Rear beater 4 -21
Multi Crop Separator 4 -22
Straw walkers 4 -24
Main Grain Pan 4 -25
Fanning mill 4 -28
Top sieve 4 -29
Bottom sieve 4 -30
Returns 4 -31
Grain tank 4 -32
1
CONTENTS
Section-Page
5 LUBRICATION AND MAINTENANCE
General information 5-1
Preliminary Service Inspection 5-2
Scheduled Service Inspection 5-3
Where and When to Carry Out Service Inspection 5-4
Routine Service Inspection 5-8
Scheduled Service Inspection 5-10
Capacities and specifications (MF7245 S – MF7245 SAL) 5-33
Capacities and specifications (MF7247 S) 5-37
6 ADJUSTMENTS
Belt and chain adjustment 6-1
Belts and chains (left-hand side) 6-2
Belts and chains (right-hand side) 6-11
Slip clutches 6-17
Tyres 6-19
Brakes 6-23
Rear axle 6-24
7 SYSTEMS
Engine 7-1
Hydraulic system 7-6
Hydrostatic transmission system 7-13
Electrical System 7-15
8 TROUBLESHOOTING
Feeding 8-1
Threshing 8-2
Separation and cleaning 8-4
Hydrostatic Transmission 8-7
Engine (all models) 8-8
Hydraulic system 8-19
Levelling Hydraulics System 8-20
Electrical System 8-20
Straw Chopper 8-21
9 OFF-SEASON STORAGE
10 OPTIONAL EQUIPMENT
11 TECHNICAL SPECIFICATIONS
Wheels and tyres 11-1
Combine Dimensions with Tyres (mm) 11-4
Tracks with runners 11-6
Combine dimensions with tracks (mm) 11-7
Clearance between unloading auger and table (mm) 11-8
Available tables and weights 11-8
Clearance between unloading auger and ground (mm) 11-9
Technical specifications – S models 11-10
Technical specifications – SAL models 11-16
12 ALPHABETICAL INDEX

MASSEY FERGUSON EU HARVESTING MF7245S MF7245S AL MF7247S MF7247S AL OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.