Massey Ferguson EU Hay Equipment MF 1800 Series 1836 1838 1840 1840 CE Square Baler Operators Manual

Description

Massey Ferguson EU Hay Equipment MF 1800 Series 1836 1838 1840 1840 CE Square Baler Operators Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Hay Equipment MF 1800 Series 1836 1838 1840 1840 CE Square Baler Operators Manual – PDF DOWNLOAD

Part. No : 700741544D Rev.

MF 1800
Series Small Square Saler
Models: 1836 / 1838 / 1840 / 1840 CE
s/n: AGCM18400FHBS3101 and Up

A word to the operator:

• It is your responsibility to read and understand the safety section in this manual and the manual for all implements before you operate this machine. You are responsible for your safety. Good safety procedures prevent injury to you and the persons around you. Make the information in the safety section of this manual a part of your safety procedure.
• This safety section is written only for this type of machine. Safety is your responsibility. You can prevent injury and death. This safety section gives basic safety examples that can occur during the operation and maintenance of your machine. This safety section is not a replacement for safety instruction in other sections of this manual.
• Injury or death can occur if the safety instruction is not obeyed. Learn how to operate the machine and how to use the controls correctly. Do not operate the machine if you do not know how to operate the machine. Do not let persons operate the machine that do not know how to operate the machine. Follow all safety instructions in the manuals and on the safety signs on the machine, the implements, and the attachments. Use only approved attachments and implements. Make sure that your machine has the correct equipment that is necessary by the local regulations.

This manual
This manual covers general safety instructions for this machine. Keep this manual with the machine. Right and left, as used in this manual, are given as if you are in the operator seat. The photos, illustrations, and data used in this manual were up to date when published, but in-line production changes can make your machine have small differences. The manufacturer reserves the right to redesign and change the machine as necessary without notification.

General information :

• When parking, park the machine and the tractor on a solid level surface. put all controls in neutral and apply the tractor park brake. Stop the tractor engine and take the key with you. Make sure the tractor and implement are in the proper operating condition according to the operator manuals. Make sure the tractor brakes and the machine brakes are adjusted correctly. The tractor must have enough weight and braking capacity, especially when operating on roads and terrain that is not even.
• Use a tractor of recommended size and weight to tow the machine. See the machine specifications for the minimum tractor size and weight. Tractor must be equipped with rollover protective structure (RO PS) and a seat belt. use seat belt during operation. Do not dismount from moving machinery. Always operate the machine with the terminal turned on. Never start the tractor with the PTO engaged or terminal turned on.
• Stay off slopes too steep for operation. Where possible avoid operating the machine near ditches, embankments, and holes. Reduce ground speed when operating on rough, slippery, or muddy surfaces and when turning or crossing slopes. Be aware of the size of the machine and have enough space available to allow for operation. Make sure all persons are clear of the rear of the bale chute when raising and lowering the chute, ejecting or dumping a bale. Do not stand between the tractor and the implement to install the hitch pin when the tractor engine is running.

TABLE OF CONTENTS:

Massey Ferguson EU Hay Equipment MF 1800 Series 1836 1838 1840 1840 CE Square Baler Operators Manual – PDF DOWNLOAD

SAFETY A-1
GENERAL INFORMATION 8-1
OPERATION C-1
ADJUSTMENTS D-1
LUBRICATION AND MAINTENANCE E-1
TROUBLESHOOTING F-1
SPECIFICATIONS G-1
ACCESSORIES AND OPTIONS H-1
ASSEMBL Y J-1
INDEX K-1

MASSEY FERGUSON EU HAY EQUIPMENT MF 1800 SERIES 1836 1838 1840 1840 CE SQUARE BALER OPERATORS MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com