Massey Ferguson EU Tractor 6200 Series Operator Instruction Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Tractor 6200 Series Operator Instruction Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Tractor 6200 Series Operator Instruction Manual – PDF DOWNLOAD

INTRODUCTION:

The safety chapter of your User book stresses certain basic safety-related situations which may be encountered during the operation and normal maintenance of the tractor and gives the information needed to cope with these situations. This chapter SUPPLEMENTS any safety instructions given in other chapters of this book. It may be necessary to take additional precautions depending on the equipment used and the working conditions on the site or in the maintenance area. AGCO can under no circumstances exercise direct control over the service entry, operation, inspection, lubrication or maintenance of the tractor. It is therefore YOUR responsibility to take suitable safety measures in such areas. NOTE: This book is published and distributed worldwide and the availability of the equipment indicated, whether on the basic tractor or as accessories, may vary according to the country in which the tractor is used.

• To find out which equipment is available in a given region, contact an AGCO dealer “USE ONLY AGCO attachments and equipment”. The purpose of this book is to allow the owner and the driver to operate the tractor in an appropriate manner. Providing they follow the instructions carefully, the tractor will give them many years of service in the AGCO tradition. Setting the equipment into service at the dealer’s provides the possibility of ensuring that these operating and servicing instructions are properly understood.
• Always consult the dealer if any part of this book is not understood. It is important for these instructions to be understood and followed. Daily maintenance should become a routine and record of hours in service should be kept. When new parts are required, it is important to use AGCO original spare parts. AGCO dealers supply only genuine original parts and can give advice concerning their fitment and use. The use of parts of lower quality may cause serious damage. Customers are advised to only purchase their service parts from an authorized AGCO dealer. Due to the considerable differences in operating conditions, it is not possible for the manufacturer to formulate complete or absolute assertions in its publications concerning the performance or operating methods of its machines or accept liability for any loss or damage which may result from such assertions or possible errors or omissions.

To prevent the guarantee being nullified, you should consult your AGCO dealer to obtain special instructions if the tractor is to be used under abnormal conditions which could be detrimental to it (use in deep water or in paddy-fields for instance). These tractors are only designed for usual farming purposes (proper use). Any other use is considered as being contrary to the designed use. AGCO declines all liability in cases of physical damage or injuries resulting from improper use the consequences of which shall be borne by the user alone. The conformity and strict adherence to the operating, servicing and repair requirements specified by AGCO are also essential factors for proper use. These tractors must only be used, serviced and repaired by personnel having full knowledge of their specific features and who are aware of the applicable safety rules (prevention of accidents). Customers are strongly recommended to contact an AGCO dealer in the event of after-sale problems and for any adjustments which may be necessary.

Warranty, pre-delivery and installation :

• The company, when selling new goods to their dealers, gives a warranty which, subject to certain conditions, guarantees that the goods are free from defects in material and workmanship. Since this book is published for worldwide circulation, it is impossible to detail the exact terms and conditions of warranty that apply to a retail customer in any particular country.
• Purchasers of new AGCO equipment should request full details from their supplying Dealer. In accordance with the company’s policy of continuous improvement to its machines, alterations in the specifications of machines may be made at any time without notice. The company accepts no responsibility for discrepancies which may occur between the specifications of its machines and the descriptions thereof contained in its publications. A Dealer is required to carry out certain activities when supplying a new AGCO tractor. These consist of a full pre-delivery inspection to ensure that the tractor supplied is ready for immediate use, and full instruction in the basic principles of operation and maintenance of the tractor.

MASSEY FERGUSON EU TRACTOR 6200 SERIES OPERATOR INSTRUCTION MANUAL – PDF DOWNLOAD:

TABLE OF CONTENTS:

Massey Ferguson EU Tractor 6200 Series Operator Instruction Manual – PDF DOWNLOAD

CHAPTER 1 -TRACTOR IDENTIFICATION 1-1
1 1 – SERIAL NUMBER 1-5
CHAPTER 2 -INTRODUCTION –
SAFETY PRECAUTIONS AND WARRANTY 2-1
2 1 – INTRODUCTION 2-5
2 1 1 – Warranty, pre-delivery and installation 2-5
2 1 2 – Warranty procedure 2-6
2 1 3 – Change of region 2-6
2 1 4 – Servicing after the warranty period 2-6
2 1 5 – Using the tractor on a public highway 2-6
2 2 – SAFETY – ALERT SYMBOL AND TERMS 2-7
2 3 – TRACTOR AND IMPLEMENT 2-7
2 4 – A WORD TO THE OPERATOR 2-8
2 5 – DANGER, WARNING AND CAUTION 2-8
2 6 – DECALS 2-8
2 7 – FOLLOW A SAFETY PROGRAM 2-8
2 7 1 – For proper operation 2-8
2 7 2 – Observe the following 2-8
2 8 – ROPS-CAB 2-9
2 8 1 – Cab 2-9
2 8 2 – Protect yourself 2-9
2 9 – PREPARE FOR SAFE OPERATION 2-10
2 9 1 – Know your equipment 2-10
2 9 2 – Use all available protective and safety devices 2-11
2 9 3 – Check the equipment 2-11
2 9 4 – Clean the tractor 2-12
2 9 5 – Protect the environment 2-12
2 10 – SERVICING THE TRACTOR 2-12
2 11 – STARTING 2-13
2 11 1 – Warn personnel before starting 2-13
2 11 2 – Mount and dismount safely 2-13
2 11 3 – Start safely 2-13
2 11 4 – Follow recommended starting procedures 2-13
2 11 5 – Test the controls 2-13
2 11 6 – Starting fluid 2-13
2 12 – WORK SAFELY 2-14
2 12 1 – Make the right moves 2-14
2 12 2 – Follow safe operating practices 2-14
2 12 3 – Watch out for others 2-14
2 12 4 – Risk of overturning 2-16
2 12 5 – To avoid side overturns 2-16
2 12 6 – To avoid rear overturns 2-16
OPERATOR INSTRUCTION BOOK
2 12 7 – General operating hazards 2-17
2 12 8 – Implements and attachments 2-18
2 12 9 – Safety – Towing 2-19
2 12 10 – Road transport 2-19
2 12 11 – Rules of the road 2-20
2 13 – SAFETY – AFTER OPERATION 2-20
CHAPTER 3 -INSTRUMENTS AND CONTROLS 3-1
3 1 – INSTRUMENT PANEL (Fig 1) 3-5
3 2 – WARNING LIGHTS PANEL (Fig 4) 3-6
3 3 – PEDALS (Fig 5) 3-7
3 4 – RIGHT HAND CONSOLE (Fig 6) 3-9
3 5 – LEFT HAND CONSOLE (Fig 71 3-9
3 5 1 – Platform model (Fig 8) 3-9
3 6 – SEAT 3-10
3 7 – STEERING WHEEL (Fig 11 l 3-11
3 8 – UPPER CONSOLE (Fig 12) 3-12
3 8 1 – Air conditioning utilisation 3-12
3 9 – SUN VISOR (Fig 15) 3-13
3 10 – ROOF HATCH (Fig 16) 3-14
3 11 – HIGH VISIBILITY ROOF (Fig 17) 3-14
CHAPTER 4 -OPERATION 4-1
4 1 – RUNNING IN 4-5
4 1 1 – Precaution 4-5
4 2 – STARTING 4-5
4 2 1 – Starting the engine 4-5
4 3 – STOPPING THE ENGINE 4-5
4 4 – DRIVING THE TRACTOR 4-5
4 4 1 – Foot throttle 4-5
4 4 2 – Choosing the right gear ratio 4-6
Synchronised range change (Fig 2) 6
4 4 3 – Speedshift 4-6
4 4 4 – Creeper gearbox (Fig 3) 4-6
4 4 5 – Power shuttle 4-6
4 4 6 – Dynashift gear selection 4-7
4 5 – DYNASHIFT GEARBOX 4-7
ii
OPERATOR INSTRUCTION BOOK
4 5 1 – General 4-7
4 5 2 – Operation 4-8
4 5 3 – Gear sequence 4-8
4 5 4 – Automation of Dynashift ratio shifting (Option) 4-9
4 6 – BRAKES 4-10
4 7 – DIFFERENTIAL LOCK 4-10
4 8 – POWER TAKE OFF (P T O) 4-10
4 8 1 – Interchangeable P T O shaft 540 and 1000 R P M 4-11
4 8 2 – Shiftable P T O – 540 and 1000 R P M (according to countries) 4-11
4 8 3 – Ground Speed P T O (optional) 4-12
4 8 4 – “Economy” P T O 4-12
4 9 – DIRECTION 4-12
4 10 – FRONT AXLE 4-13
4 10 1 – suspended front axle 4-13
4 11 – HYDRAULIC LIFT 4-14
4 11 1 – Attaching an implement from the driving seat 4-15
4 11 2 – Lowering 4-15
4 11 3 – Lifting 4-15
4 11 4 – Depth control 4-15
4 11 5 – Attaching an implement using external controls 4-16
4 11 6 – Transport 4-17
4 11 7 – Activate transport control system 4-17
4 11 8 – Quick soil engagement 4-17
4 11 9 – Field operation 4-18
4 11 10 – Leaving work and at the headland 4-18
4 12 – AUXILIARY HYDRAULICS 4-19
4 12 1 – Open center 4-19
4 12 2 – Closed center load sensing (optional) 4-19
4 12 3 – Emergency manual control of the spool valves 4-20
4 12 4 – Memorisation of the joystick (Fig 35) 4-21
4 13 – THREE-POINT LINKAGE 4-22
4 13 1 – Linkage 4-22
4 13 2 – Implement attachment 4-22
4 13 3 – Telescopic lower links 4-22
4 13 4 – Lift rods 4-22
4 13 5 – Stabilizers 4-23
4 13 6 – Adjustment procedures 4-23
4 14 – DRAWBARS AND HITCHES 4-24
4 14 1 – Linkage drawbar 4-24
4 14 2 – Swinging drawbar 4-24
4 14 3 – Pintle for semi-mounted trailer 4-25
4 14 4 – Roller type swinging drawbar 4-25
4 14 5 – Clevis hitch Easy adjust type 4-25
4 14 6 – Auto-hitch ” Dromone” not for Nord America 4-25
4 15 – AUTOTRONIC 4-27
4 15 1 – Differential lock control 4-27
4 15 2 – Power front axle (4WD) 4-27
4 15 3 – Power Take-Off Control 4-27
4 15 4 – Dynashift 4-27
iii
OPERATOR INSTRUCTION BOOK
4 15 5 – Hydraulic pressure (Low pressure) 4-27
4 15 6 – Economy P T O 4-28
CHAPTER 5 -MAINTENANCE AND ADJUSTMENTS 5-1
5 1 – INITIAL 50 HOUR SERVICE INSPECTION 5-5
5 1 1 – Engine, Fuel and Cooling System 5-5
5 1 2 – Electrical System and Instruments 5-5
5 1 3 – Front Axle and Steering 5-5
5 1 4 – Transmission and Hydraulics 5-5
5 1 5 – Clutches and Brakes 5-5
5 1 6 – General 5-5
5 2 – dealer service operation 5-6
5 3 – USER GUIDE 5-8
5 3 1 – Engine, fuel and cooling system 5-8
5 3 2 – Electrical System and Instruments 5-8
5 3 3 – Front Axle and Steering 5-8
5 3 4 – Transmission and Hydraulics 5-8
5 3 5 – General 5-8
5 4 – APPROVED LUBRICANTS 5-9
5 4 1 – Engine oil 5-9
5 4 2 – Recommended SAE viscosity grades (SAE J300d) 5-9
5 4 3 – Engine coolant 5-9
5 4 4 – Transmission and hydraulic clutch 5-9
5 4 5 – Front axle (4-WD only): API GL5 – 80 W/90 5-9
5 4 5 – Suspended front axle: API GL5 – 85 W/140 5-9
5 4 6 – Lubrication fittings 5-9
5 5 – INSTRUCTIONS FOR PRESSURE WASHING 5-9
5 6 – GREASING 5-10
5 6 1 – Grease the following 5-10
5 7 – ENGINE 5-13
5 7 1 – 4 cylinder/6 cylinder engine 5-13
5 7 2 – Oil level 5-14
5 7 3 – Change the engine oil every 300 hours 5-14
5 7 4 – Change the engine oil filter every 300 hours 5-14
5 7 5 – Closed circuit breather 5-14
5 8 – FUEL SYSTEM 5-15
5 8 1 – Fuel filter(s) 5-15
5 8 2 – Fuel pre-filter 5-15
5 8 3 – Bleeding the fuel system 5-15
5 8 4 – Fuel injection pump, governor and injectors 5-15
5 9 – AIR CLEANER 5-16
5 9 1 – Main and secondary element 5-16
5 10 – COOLING SYSTEM 5-17
5 11 – STEERING, TRANSMISSION AND HYDRAULIC SYSTEM 5-18
5 11 1 – 15 micron oil filter 5-19
iv
OPERATOR INSTRUCTION BOOK
5 11 2 – Transmission oil cooler 5-20
5 11 3 – Mechanical reverse shuttle, Hydraulic clutch 5-20
5 12 – FRONT AXLE – 2-WHEEL DRIVE 5-21
5 13 – FRONT AXLE – 4-WHEEL DRIVE 5-21
5 13 1 – Final reduction units 5-21
5 13 2 – Front axle 5-22
5 13 3 – Suspended front axle 5-22
5 14 – CLUTCH AND BRAKES 5-22
5 14 1 – Adjustments 5-22
5 15 – AIR CONDITIONING SYSTEM 5-23
5 15 1 – Condenser 5-23
5 15 2 – Checking operation of air conditioning system 5-23
5 15 3 – Compressor belt tension adjustment 5-23
5 15 4 – Cab air filter 5-23
5 15 5 – High visibility roof 5-23
5 16- R O P S CAB OR FRAME 5-24
5 17 – TYRES 5-24
5 17 1 – Dual rear wheels 5-24
5 17 2 – Operation 5-24
5 17 3 – Wheel bolts 5-24
5 17 4 – Tyre pressure 5-25
5 17 5 – Tyres pressures 5-25
5 18 – WHEEL NUTS 5-26
5 19 – TRACK ADJUSTMENTS 5-26
5 19 1 – Front track 5-26
5 19 2 – Pressed steel wheels 5-27
5 19 3 – Rear track adjustment (mm-in) 5-28
5 19 4 – PAVT wheels 5-29
5 19 5 – Adjustment of PAVT wheels 5-30
5 19 6 – Straight shafts 5-31
5 19 7 – Changing the position of the wheel on the shaft 5-31
5 20 – ELECTRICAL EQUIPMENT 5-32
5 20 1 – Batteries 5-32
5 20 2 – Alternator 5-32
5 20 3 – Trailer socket 5-32
5 20 4 – Headlight adjustment 5-32
5 21 – FUSE REPLACEMENT (EU) 5-33
5 22 – FUSE REPLACEMENT (NA) 5-34
5 23 – DIESEL FUEL SPECIFICATIONS 5-35
5 24 – FUEL HANDLING AND STORAGE 5-35
5 24 1 – Cleanliness 5-35
5 24 2 – Advice on the use of fuel in cold weather 5-35
5 25 – STORING THE TRACTOR 5-35
V
OPERATOR INSTRUCTION BOOK
CHAPTER 6 -SPECIFICATIONS 6-1
6 1 – ENGINE 6-5
6 2 – FUEL SYSTEM AND AIR CLEANER 6-5
6 3 – ROAD SPEEDS 6-6
6 3 1 – Road speeds at 2200 R P M “Speedshift”and creeper gearbox Tyres 16 9 R34 6-6
6 3 2 – Road speeds at 2200 R P M “Speedshift”and creeper gearbox Tyres 16 9 R38 6-6
6 3 3 – Road speeds at 2200 R P M “Speedshift”and creeper gearbox Tyres 18 4 R38 6-7
6 3 4 – Road speeds at 2200 R P M “Speedshift”and creeper gearbox Tyres 20 8 R38 6-7
6 3 5 – Road speed forward at 2200 tr/min ” Dynashift ” and creepergearbox 6-8
6 3 6 – Road speed reverse at 2200 tr/min ” Dynashift ” 6-9
6 3 7 – Road speed reverse at 2200 tr/min ” Dynashift ” and creeper gearbox 6-10
6 4 – ELECTRICAL SYSTEM 6-11
6 5 – COOLING 6-11
6 6 – TRANSMISSION 6-11
6 7 – FINAL REDUCTION UNITS 6-11
6 8 – POWER TAKE-OFF 6-12
6 9 – FOUR-WHEEL DRIVE FRONT AXLE 6-12
6 10 – HYDRAULICS (ACCORDING TO MODEL) 6-12
6 10 1 – Open center hydraulic system 6-12
6 10 2 – Closed centre hydraulic system with flow and pressure control (optional) 6-13
6 11 – HYDRAULIC LIFT 6-13
6 11 1 – Rear 6-13
6 11 2 – Front 6-13
6 12 – BRAKES 6-13
6 13 – DIFFERENTIAL LOCK – REAR AXLE 6-14
6 14 – STEERING 6-14
6 15 – WHEELS 6-14
6 16 – TYRES 6-14
6 17 – TYRE PRESSURE 6-14
6 18 – TRACK ADJUSTMENTS 6-14
6 19 – NOISE LEVELS 6-15
6 20 – CAPACITIES 6-15
6 21 – TIGHTENING TORQUE 6-16
6 21 1 – Wheel nuts 6-16
6 21 2 – Miscellaneous 6-16
6 22 – DIMENSIONS AND WEIGHTS 6-17
vi
OPERATOR INSTRUCTION BOOK
CHAPTER 7 -ACCESSORIES AND OPTIONS 7-1
7 1 – AVAILABLE ACCESSORIES 7-5
7 2 – TRACTOR PERFORMANCE MONITOR “DATATRONIC” 7-6
7 2 1 – Introduction 7-6
7 2 2 – Description 7-6
7 2 3 – Symbols 7-7
7 2 4 – U se 7-8
7 2 5 – U se of the memory (Fig 5 and Fig 6) 7-9
7 2 6 – U se when working 7-10
7 2 7 – Wheel slip control (Fig 9) 7-12
7 2 8 – Comparative mode (Fig 10) 7-13
7 2 9 – Auxiliary functions 7-14
7 2 10 – Screen contrast (Fig 13) 7-14
7 2 11 – Printing of the memory content (Fig 14 and Fig 15) 7-15
7 3 – Rear DUAL CONTROL 7-16
7 3 1 – General 7-16
7 3 2 – Description of the adjustment screen 7-16
7 3 3 – SETTINGS 7-17
7 3 4 – U SE 7-19
7 3 5 – Working operation 7-20
7 4 – GLOSSARY 7-20
7 5 – FRONT DUAL CONTROL 7-21
7 5 1 – General 7-21
7 5 2 – Description of the adjustment screen 7-21
7 5 3 – Settings 7-21
7 5 4 – U se (Fig 25) 7-22
7 6- tra i led IMPLEMENT CONTROL (T I C) 7-23
7 6 1 – General 7-23
7 6 2 – Description of the adjustment screen 7-23
7 6 3 – Settings (Fig 24) 7-23
7 6 4 – U se (Fig 27) 7-24

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V