Massey Ferguson EU Tractor MF 5600 Series MF5611 MF5612 MF5613 Deluxe Operator’s Manual – DOWNLOAD

Description

Massey Ferguson EU Tractor MF 5600 Series MF5611 MF5612 MF5613 Deluxe Operator’s Manual – DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Tractor MF 5600 Series MF5611 MF5612 MF5613 Deluxe Operator’s Manual – DOWNLOAD

Part. No : 7060734M3

Introduction – Safety instructions

Operator’s Manual :

The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.

• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories. IMPORTANT: This manual must always be kept with the tractor. For extra copies, contact your Massey Ferguson dealer.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF 5600 Series MF5611 MF5612 MF5613 Deluxe Operator’s Manual – DOWNLOAD

1 Tractor identification 9
1 1 Locating serial numbers 11
1 1 1 Locating serial numbers 1 1
1 2 Your tractor identification details 13
1 2 1 Your tractor identification details 1 3
2 Safety instructions and safety points – Warranty 15
2 1 Introduction 17
2 1 1 Introduction – Safety instructions 17
2 2 Safety – Symbols and terms 19
2 2 1 Safety- Symbols and terms 19
2 3 Safety decals and instructions 20
2 3 1 Checking and replacing the safety decals and instructions 20
2 3 2 Presentation and location of the safety decals and instructions 2 1
2 4 General safety instructions 26
2 4 1 Awareness of the safety instructions and symbols 2 6
2 4 2 Operator familiarity in the use of the tractor 2 6
2 4 3 Filling the fuel tank 27
2 4 4 Mounting and dismounting the operator’s seat 27
2 4 5 Mandatory procedure before dismounting the tractor 2 8
2 5 Special safety instructions for preparing the tractor for use 29
2 5 1 Protective clothing 2 9
2 5 2 Activated carbon filter information 2 9
2 5 3 Safety devices and items 3 2
2 5 4 Checking the tractor 3 2
2 6 Specific safety instructions for starting the tractor 34
2 6 1 Protection of persons other than the operator 3 4
2 6 2 Start up safely 3 4
2 6 3 Checks to be carried out after start-up 3 5
2 7 Specific safety instructions for using the tractor 36
2 7 1 General instructions 3 6
2 7 2 Protection of persons other than the operator 3 7
2 7 3 Overturning 3 7
2 7 4 Tractor towing 4 0
2 7 5 Regulatory data o n maximum permitted trailed weights 4 0
2 7 6 Road use 4 2
2 7 7 Parking brake 4 3
2 7 8 Power take-off 4 3
2 7 9 Implements 4 4
2 7 10 Front-end loader 4 6
2 8 Specific safety instructions for servicing the tractor 4 8
2 8 1 Pollution warning to observe when servicing the tractor 4 8
2 8 2 General instructions 4 8
2 8 3 Handling instructions 4 9
2 8 4 Special instructions for cleaning the tractor 50
2 9 Protective structures 52
2 9 1 Protective structures – Use and accreditation 5 2
2 9 2 Cab 5 2
2 9 3 Seat belt 5 2
2 9 4 Instructor seat 5 3
MF 5600 – Operation
7060734M3
Table of contents
2 10 Warranty 54
2 10 1 General 5 4
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 5 4
2 10 3 Warranty procedure 5 4
2 10 4 Procedure to follow if changing region 5 4
2 10 5 Servicing during and after the warranty period 5 5
2 10 6 California emission control warranty statement 5 5
2 10 7 Emission reduction warranty statement for the United States and Canada 5 8
3 Operation 6 3
3 1 Cab 6 7
3 1 1 Steering console 6 7
3 1 2 Instrument panel 6 8
3 1 3 Control unit 7 3
3 1 4 Pedals 7 3
3 1 5 Steering wheel 7 4
3 1 6 Operator presence detector 7 4
3 1 7 Automatic adjustment pneumatic seat 7 8
3 1 8 Right-hand console 8 5
3 1 9 Command Control Armrest 8 5
3 1 10 Right-hand pillar 87
3 1 1 1 Left-hand console 8 8
3 1 1 2 Upper console 8 8
3 1 1 3 Manual air conditioning 90
3 1 1 4 Automatic air conditioning 9 5
3 1 1 5 Additional heater 10 1
3 1 1 6 Accessories sockets 10 2
3 1 17 Emergency exits 10 3
3 1 1 8 Sun visor 10 3
3 1 19 Roof hatch 10 4
3 1 20 Wheel chock(s) (optional) 10 5
3 2 Dash Control Center control screens on the instrument panel 10 7
3 2 1 Using the Dash Control Center screen 10 7
3 2 2 Dash Control Center screens 10 7
3 3 Body 114
3 3 1 Opening the bonnet 1 1 4
3 3 2 Adjusting the external rear-view mirrors 1 1 4
3 3 2 1 Adjusting the arm extensions (depending on model) 1 1 4
3 3 2 2 Adjusting the rear-view mirrors (depending on model) 1 1 5
3 3 2 3 Manual adjustment of the rear-view mirror with an electric control 1 1 5
3 3 3 Adjusting the step 1 1 5
3 4 Engine 117
3 4 1 Running-in 1 17
3 4 2 Filling with fuel 1 17
3 4 3 Start switch 1 19
3 4 4 Start-up 1 19
3 4 5 Cold weather starting 1 20
3 4 6 Information about the various operating modes of the SCR Technology engine 1 2 1
3 4 7 Stopping the engine 1 2 4
3 4 8 Engine speed 1 2 4
3 4 9 Storing engine speeds 1 2 5
3 5 Transmission 127
3 5 1 Presentation of the different driving modes 1 27
3 5 2 Clutch function 1 27
3 5 3 PowerShuttle 1 2 8
3 5 4 Adjusting the start ratios ( 1A 1B , 1C etc ) 1 30
3 5 4 1 Starting ratio 1 3 1
MF 5600 – Operation
7060734M3
3 6
3 7
3 8
Table of contents
3 5 5 Storing the transmission ratios (1 A, 1B , 1C , etc ) 13 2
3 5 6 Lever (Speedmatching) mode 13 4
3 5 7 Pedal (AutoDrive) mode 13 7
3 5 8 Road mode (Hare)/Field mode (Tortoise) 1 4 0
3 5 9 Changing the transmission ratios (1A , 1B , 1C etc ) 14 2
3 5 10 Optional creeper range (snail) 14 2
3 5 1 1 Tractor towing 14 3
3 5 12 Forward speed calibration 14 3
Brakes 14 5
3 6 1 Brake pedals 14 5
3 6 2 Hydraulic trailer brake 14 5
3 6 3 Pneumatic trailer brake 14 6
3 6 4 Parking brake 14 7
Front axle 14 9
3 7 1 Four-wheel drive front axle 14 9
3 7 2 Suspended front axle 150
3 7 3 Permissible load o n the front axle 15 1
Differential lock 153
3 8 1 Differential lock 15 3
3 9 Power take-off 155
3 9 1 Front power take-off 15 5
3 9 2 Rear power take-off (PTO) 15 6
3 9 2 1 Selecting the power take-off speed 15 6
3 9 2 2 Engaging PTO in manual mode: 15 7
3 9 2 3 Engaging PTO in automatic mode: 15 8
3 9 3 Economy PTO 15 8
3 9 4 GS PTO (optional) 15 9
3 9 5 Changing the flanged shaft 160
3 9 6 PTO external control 160
3 9 7 Power take-off electronic controls 1 6 1
3 9 8 Power take-off protection 1 6 2
3 10 Linkage 16 4
3 10 1 General 1 6 4
3 10 2 Rear linkage electronic controls 1 6 4
3 10 3 Rear linkage operation 1 6 6
3 10 4 Rear linkage external controls 171
3 10 5 Front linkage 171
3 10 6 Top link 176
3 10 7 Bottom links 178
3 10 8 Lift rods 179
3 10 9 Stabilisers 1 8 1
3 11 Towing equipment 18 2
3 11 1 General 182
3 11 2 Swinging drawbar 183
3 12 Auxiliary hydraulics 18 5
3 12 1 General 1 8 5
3 12 2 Description o f hydraulic couplers o n Open Center system 1 8 5
3 12 3 Use o f hydraulic couplers o n Open Center system 1 8 6
3 12 4 Description o f hydraulic couplers o n Closed Center system (Load Sensing) 19 0
3 12 5 Use of hydraulic couplers on Closed Center system (Load Sensing) 19 3
3 12 6 Auxiliary hydraulics locking/unlocking 19 8
3 12 7 Description and use of the cab controls 2 0 1
3 12 8 Control levers 2 0 4
3 12 9 Open Centre 10 0 I/min (2 6 4 gal/min (US)) 2 0 5
3 12 9 1 Pump coupling (combined flow) 2 0 5
3 12 9 2 Pump uncoupling 2 0 6
3 12 10 Setting flow rates and time delay 2 0 6
MF 5600 – Operation
7060734M3
Table of contents
3 13 Front-end loader function 20 9
3 1 3 1 Front-end loader 20 9
3 1 3 2 Layout of components 20 9
3 1 3 3 Using the electric joystick of the front-end loader 2 10
3 1 3 3 1 Joystick functions for the front-end loader 2 1 1
3 1 3 3 2 Floating position 2 1 1
3 1 3 3 3 Display of front-end loader flow rates 2 1 1
3 1 3 3 4 3rd and 4th functions 2 1 3
3 1 3 3 5 Arm suspension 2 1 4
3 1 3 3 6 Locking and unlocking accessories 2 1 5
3 1 3 3 7 Automatic shaking function for the implement 2 1 5
3 14 Lighting 216
3 1 4 1 Main lighting control module 2 1 6
3 1 4 2 Work lights module 2 17
3 15 Front tires and track widths 219
3 1 5 1 Wheel studs 2 19
3 1 5 2 Installation points of the axle stands 2 19
3 1 5 3 Front track width: Four-wheel drive front axle 2 20
3 1 5 4 Adjusting the 4WD front axle stops 2 2 2
3 1 5 4 1 Fitting the oscillation stops 2 2 3
3 1 5 4 2 Adjusting the steering angle 2 2 3
3 1 5 4 3 Toe-in check 2 2 4
3 1 5 4 4 Adjusting the front fenders Shoe side adjustment on the front axle 2 2 4
3 1 5 4 5 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 2 4
3 1 5 4 6 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 2 4
3 1 5 5 Tires 2 2 5
3 1 5 6 Tire pressures 2 2 5
3 16 Rear tires and track widths 226
3 1 6 1 Wheel studs 2 2 6
3 1 6 2 Installation points of the axle stands 2 2 6
3 1 6 3 Rear track width with flanged shafts 2 27
3 17 Dual wheels 230
3 17 1 Dual wheels 2 30
3 18 Ballast 232
3 1 8 1 Liquid ballasting 2 3 2
3 1 8 2 Front-end weight 2 3 2

MASSEY FERGUSON EU TRACTOR MF 5600 SERIES MF5611 MF5612 MF5613 DELUXE OPERATOR’S MANUAL – DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V