Massey Ferguson EU Tractor MF 5700 SL Series 5710 5711 5712 5713 SL Dyna-4 Dyna-6 Operator’s Manual

Description

Massey Ferguson EU Tractor MF 5700 SL Series 5710 5711 5712 5713 SL Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Tractor MF 5700 SL Series 5710 5711 5712 5713 SL Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

MF 5700 SL – Operation
Version Deluxe
M-5710 SL
M- 571 SL
M 5712 SL
MF 5713 SL

ACT001483B

Introduction – Safety instructions

Operator’s Manual :

The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.

• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories. IMPORTANT: This manual must always be kept with the tractor. For extra copies, contact your Massey Ferguson dealer.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF 5700 SL Series 5710 5711 5712 5713 SL Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

1 Tractor identification 9
1 1 Locating serial numbers 11
1 1 1 Locating serial numbers 11
1 2 Your tractor identification details 12
1 2 1 Your tractor identification details 12
2 Safety instructions and safety points – Warranty 13
2 1 Introduction 15
2 1 1 Introduction – Safety instructions 15
2 2 Safety – Symbols and terms 17
2 2 1 Safety- Symbols and terms 17
2 3 Safety decals and instructions 18
2 3 1 Checking and replacing the safety decals and instructions 18
2 3 2 Presentation and location of the safety decals and instructions 19
2 4 General safety instructions 2 4
2 4 1 Awareness of the safety instructions and symbols 2 4
2 4 2 Operator familiarity in the use of the tractor 2 4
2 4 3 Filling the fuel tank 2 5
2 4 4 Mounting and dismounting the operator’s seat 2 5
2 4 5 Mandatory procedure before dismounting the tractor 2 6
2 5 Special safety instructions for preparing the tractor for use 27
2 5 1 Protective clothing 2 7
2 5 2 Activated carbon filter information 2 7
2 5 3 Safety devices and items 30
2 5 4 Checking the tractor 30
2 6 Specific safety instructions for starting the tractor 32
2 6 1 Protection of persons other than the operator 32
2 6 2 Start up safely 32
2 6 3 Starting the tractor with jump start cables 33
2 6 4 Checks to be carried out after start-up 34
2 7 Specific safety instructions for using the tractor 35
2 7 1 General instructions 35
2 7 2 Protection of persons other than the operator 36
2 7 3 Overturning 36
2 7 4 Tractor towing 39
2 7 5 Regulatory data on maximum permitted trailed weights 39
2 7 6 Road use 4 1
2 7 7 Parking brake 4 2
2 7 8 Power take-off 4 2
2 7 9 Implements 4 3
2 7 10 Front-end loader 4 5
2 8 Specific safety instructions for servicing the tractor 47
2 8 1 Pollution warning to observe when servicing the tractor 4 7
2 8 2 General instructions 4 7
2 8 3 Handling instructions 4 8
2 8 4 Special instructions for cleaning the tractor 4 9
2 9 Protective structures 51
2 9 1 Protective structures – Use and accreditation 5 1
2 9 2 Cab 5 1
2 9 3 Seat belt 5 1
MF 5700 SL – Operation
ACT0014838
Table of contents
2 9 4 Instructor seat 5 2
2 10 Warranty 5 3
2 10 1 General 5 3
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 5 3
2 10 3 Warranty procedure 5 3
2 10 4 Procedure to follow if changing region 5 3
2 10 5 Servicing during and after the warranty period 5 4
2 10 6 California emission control warranty statement 5 4
2 10 7 Emission reduction warranty statement for the United States and Canada 5 7
3 Usage 61
3 1 Standard cab 65
3 1 1 Steering console 6 5
3 1 2 Instrument panel 6 6
3 1 3 Control unit 7 2
3 1 4 Pedals 7 3
3 1 5 Steering wheel 7 3
3 1 6 Operator presence detector 7 4
3 1 7 Automatic adjustment pneumatic seat 7 8
3 1 8 Instructor seat 8 4
3 1 9 Right-hand console 8 5
3 1 10 Command Control Armrest 8 5
3 1 1 1 Right-hand pillar 8 7
3 1 12 Left-hand console 8 7
3 1 1 3 Upper console 8 8
3 1 1 4 Manual air conditioning 9 0
3 1 1 5 Automatic air conditioning 9 5
3 1 16 Additional heater 10 1
3 1 1 7 Accessories sockets 10 2
3 1 18 Emergency exits 10 2
3 1 1 9 Sun visor 10 3
3 1 2 0 Roof hatch 10 3
3 1 2 1 Wheel chock(s) (optional) 10 5
3 2 Control screens on the instrument panel 107
3 2 1 Using the Setup and Information Screen 10 7
3 2 2 Setup and Information screens 10 8
3 3 Body 1 21
3 3 1 Opening the bonnet 12 1
3 3 2 Adjusting the external rear-view mirrors 12 1
3 3 2 1 Positioning the arms 12 1
3 3 2 2 Adjusting the arm extensions (depending on model) 12 2
3 3 2 3 Adjusting the rear-view mirrors (depending on model) 12 2
3 3 2 4 Manual adjustment of the rear-view mirror with an electric control 12 3
3 3 3 Adjusting the step 12 3
3 4 Engine 124
3 4 1 Running-in 12 4
3 4 2 Filling with fuel 12 4
3 4 3 Start switch 12 6
3 4 4 Start-up 12 6
3 4 5 Starting the Tier 4F/ Stage IV SCR Technology engine in cold weather 12 7
3 4 6 Information on the different operating modes of the Tier 4F/ Stage IV SCR
Technology engine 12 9
3 4 7 Stopping the engine 1 3 4
3 4 8 Engine speed 1 3 4
3 4 9 Storing an engine speed 1 3 6
3 5 Transmission 1 38
3 5 1 Presentation of the different driving modes 1 3 8
MF 5700 SL – Operation
3 5 2 Clutch function 1 3 8
3 5 3 PowerShuttle 1 3 9
3 5 3 1 PowerShuttle Protection Function 1 4 0
3 5 4 Adjusting the start ratios ( 1A, 1B , 1C etc ) 14 1
3 5 5 Starting ratio 1 4 2
3 5 6 Storage of transmission ratios ( 1A , 1B , 1C , etc ) 14 2
3 5 7 Lever (Speedmatching) mode 1 4 4
3 5 8 Pedal (AutoDrive) mode 1 4 6
3 5 9 Road mode (Hare)/Field mode (Tortoise) 1 4 8
3 5 10 Changing the transmission ratios ( 1A , 1B , 1C etc ) 150
3 5 1 1 Optional creeper range (snail) 1 5 0
3 5 1 2 Tractor towing 1 5 1
3 5 1 3 Forward speed calibration 1 5 1
Brakes 153
3 6 1 Brake pedals 1 5 3
3 6 2 Hydraulic trailer brake 1 5 3
3 6 3 Pneumatic trailer brake 1 5 4
3 6 4 Parking brake 1 5 5
Front axle 157
3 7 1 F our-wheel drive front axle 15 7
3 7 2 Suspended front axle 158
3 7 3 Permissible load on the front axle 160
Differential lock 161
3 8 1 Differential lock 16 1
Power take-off 163
3 9 1 Front power take-off 16 3
3 9 2 Rear power take-off (PTO) 16 4
3 9 2 1 Selecting the power take-off speed 16 4
3 9 2 2 Adjusting the progressivity of power-take-off engagement 16 5
3 9 2 3 Engaging PTO in manual mode: 16 5
3 9 2 4 Engaging PTO in automatic mode: 16 5
3 9 3 Economy PTO 16 6
3 9 4 GSPTO (optional) 16 7
3 9 5 Changing the flanged shaft 16 7
3 9 6 PTO external control 168
3 9 7 Power take-off electronic controls 16 9
3 9 8 Power take-off protection 16 9
3 10 Linkage 171
3 10 1 General 1 7 1
3 10 2 Rear linkage electronic controls 1 7 1
3 10 3 Rear linkage operation 1 7 3
3 10 4 Rear linkage external controls 1 7 8
3 10 5 General information for the front linkage 1 7 9
3 10 6 Top link 18 6
3 10 7 Bottom links 18 8
3 10 8 Lift rods 18 9
3 10 9 Stabilisers 18 9
3 10 9 1 Stabilizers with manual telescopic adjustment 1 9 0
3 11 Towing equipment 192
3 11 1 G eneral 19 2
3 11 2 Swinging drawbar 19 3
3 11 3 Lift rod-type pickup hitch 19 4
3 12 Auxiliary hydraulics 199
3 12 1 General 1 9 9
3 12 2 Description of hydraulic couplers on Open Center system 1 9 9
3 12 3 Use of hydraulic couplers on Open Center system 20 0
3 12 4 Description of hydraulic couplers on Closed Center system (Load Sensing) 20 3
MF 5700 SL – Operation
ACT0014838
Table of contents
3 12 5 Use of hydraulic couplers on Closed Center system ( Load Sensing) 20 5
3 12 6 Auxiliary hydraulics locking/ unlocking 20 9
3 12 7 Description and use of the cab controls 2 1 1
3 12 8 Hydraulics control lever 2 1 3
3 12 9 Open Centre 10 0 I/ min ( 2 6 4 gal/ min (US)) 2 1 4
3 12 9 1 Pump coupling (combined flow) 2 1 5
3 12 9 2 Pump uncoupling 2 1 5
3 12 10 Setting flow rates and time delay 2 1 5
3 13 Front-end loader function 218
3 1 3 1 Front-end loader 2 18
3 1 3 2 Layout of components 2 18
3 1 3 3 Front-end loader connection 2 1 9
3 1 3 4 Using the electric joystick of the front-end loader 2 2 0
3 1 3 4 1 Activating the front-end loader 2 2 0
3 1 3 4 2 Joystick functions for the standard front-end loader 2 2 1
3 1 3 4 3 Floating position 2 2 1
3 1 3 4 4 Display of front-end loader flow rates 2 2 2
3 1 3 4 5 3rd and 4th functions 2 2 3
3 1 3 4 6 Arm suspension 2 2 5
3 1 3 4 7 Locking and unlocking accessories 2 2 5
3 1 3 4 8 Automatic shaking function for the implement 2 2 5
3 14 Lighting 2 2 6
3 1 4 1 Main lighting control module 2 2 6
3 1 4 2 Work lights module 2 2 6
3 15 Front wheels and track widths 228
3 1 5 1 Wheel studs 2 2 8
3 1 5 2 Installation points of the axle stands 2 2 8
3 1 5 3 Front track width: Four-wheel drive front axle 2 2 9
3 1 5 4 Adjusting the 4WD front axle stops 2 3 1
3 15 4 1 Fitting the oscillation stops 2 3 2
3 1 5 4 2 Adjusting the steering angle 2 3 2
3 15 4 3 Toe-in check 2 3 2
3 1 5 4 4 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 3 3
3 1 5 4 5 Adjusting the front fenders Shoe side adjustment on the front axle 2 3 3
3 1 5 4 6 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 3 3
3 1 5 5 Tires 2 3 4
3 1 5 6 Tire pressures 2 3 4
3 16 Rear wheels and track widths 235
3 16 1 Wheel studs 2 3 5
3 16 2 Installation points of the axle stands 2 3 5
3 16 3 Rear track width with flanged shafts 2 3 6
3 17 Dual wheels 2 41
3 1 7 1 Dual wheels 2 4 1
3 18 Ballast 243
3 18 1 Liquid ballasting 2 4 3
3 18 2 Front-end weight 2 4 3

MASSEY FERGUSON EU TRACTOR MF 5700 SL SERIES 5710 5711 5712 5713 SL DYNA-4 DYNA-6 OPERATOR’S MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V