Massey Ferguson EU Tractor MF5600 Series MF5611 MF5612 MF5613 Classic Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Tractor MF5600 Series MF5611 MF5612 MF5613 Classic Operator’s Manual – PDF DOWNLOADz

DESCRIPTION:

Massey Ferguson EU Tractor MF5600 Series MF5611 MF5612 MF5613 Classic Operator’s Manual – PDF DOWNLOAD

Part. NO : 7060711M3

Introduction – Safety instructions

Operator’s Manual :

The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.

• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories. IMPORTANT: This manual must always be kept with the tractor. For extra copies, contact your Massey Ferguson dealer.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF5600 Series MF5611 MF5612 MF5613 Classic Operator’s Manual – PDF DOWNLOAD

1 Tractor identification 9
1 1 Locating serial numbers 11
1 1 1 L ocating serial numbers 11
1 2 Your tractor identification details 13
1 2 1 Your tractor identification details 13
2 Safety instructions and safety points – Warranty 15
2 1 Introduction 17
2 1 1 Introduction – Safety instructions 17
2 2 Safety – Symbols and terms 19
2 2 1 Safety- Symbols and terms 19
2 3 Safety decals and instructions 20
2 3 1 Checking and replacing the safety decals and instructions 2 0
2 3 2 Presentation and location of the safety decals and instructions 2 1
2 4 General safety instructions 26
2 4 1 A wareness of the safety instructions and symbols 2 6
2 4 2 Operator familiarity in the use of the tractor 2 6
2 4 3 Filling the fuel tank 2 7
2 4 4 Mounting and dismounting the operator’s seat 2 7
2 4 5 Mandatory procedure before dismounting the tractor 2 8
2 5 Special safety instructions for preparing the tractor for use 29
2 5 1 Protective clothing 2 9
2 5 2 Activated carbon filter information 2 9
2 5 3 Safety devices and items 3 2
2 5 4 Checking the tractor 3 2
2 6 Specific safety instructions for starting the tractor 34
2 6 1 Protection of persons other than the operator 3 4
2 6 2 Start up safely 3 4
2 6 3 Checks to be carried out after start-up 3 5
2 7 Specific safety instructions for using the tractor 36
2 7 1 General instructions 3 6
2 7 2 Protection of persons other than the operator 3 7
2 7 3 Overturning 3 7
2 7 4 Tractor towing 4 0
2 7 5 Regulatory data on maximum permitted trailed weights 4 0
2 7 6 Road use 4 2
2 7 7 Parking brake 4 3
2 7 8 Power take-off 4 3
2 7 9 Implements 4 4
2 7 10 Front-end loader 4 6
2 8 Specific safety instructions for servicing the tractor 48
2 8 1 Pollution warning to observe when servicing the tractor 4 8
2 8 2 General instructions 4 8
2 8 3 Handling instructions 4 9
2 8 4 Special instructions for cleaning the tractor 50
2 9 Protective structures 52
2 9 1 Protective structures – Use and accreditation 5 2
2 9 2 Cab 5 2
2 9 3 Seat belt 5 2
2 9 4 Instructor seat 5 3
MF5600 – Operation
7060711M3
Table of contents
2 10 Warranty 54
2 10 1 General 5 4
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 5 4
2 10 3 Warranty procedure 5 4
2 10 4 Procedure to follow if changing region 5 4
2 10 5 Servicing during and after the warranty period 5 5
2 10 6 California emission control warranty statement 5 5
2 10 7 Emission reduction warranty statement for the United States and Canada 5 8
3 Operation 6 3
3 1 Standard cab 6 7
3 1 1 Steering console 6 7
3 1 2 Instrument panel 6 8
3 1 3 Control unit 7 3
3 1 4 Pedals 7 3
3 1 5 Steering wheel 7 4
3 1 6 Operator presence detector 7 4
3 1 7 Automatic adjustment pneumatic seat 7 8
3 1 8 Manual adjustment pneumatic seat 8 4
3 1 9 Manual adjustment mechanical seat 8 9
3 1 10 Right-hand console 9 2
3 1 11 Right-hand pillar 9 3
3 1 12 Left-hand console 9 3
3 1 13 Upper console 9 4
3 1 14 Manual air conditioning 9 6
3 1 15 Additional heater 10 1
3 1 16 Accessories sockets 10 1
3 1 17 Emergency exits 10 2
3 1 18 Sun visor 10 2
3 1 19 Roof hatch 10 3
3 1 2 0 Wheel chock(s) (optional) 10 4
3 2 Dash Control Center control screens on the instrument panel 10 6
3 2 1 Using the Dash Control Center screen 10 6
3 2 2 Dash Control Center screens 10 6
3 3 Body 111
3 3 1 Opening the bonnet 111
3 3 2 Adjusting the external rear-view mirrors 111
3 3 2 1 Positioning the arms 111
3 3 2 2 Adjusting the arm extensions (depending on model) 112
3 3 2 3 Adjusting the rear-view mirrors (depending on model) 112
3 3 2 4 Manual adjustment of the rear-view mirror with an electric control 113
3 3 3 Adjusting the step 113
3 4 Engine 115
3 4 1 Running-in 115
3 4 2 Filling with fuel 115
3 4 3 Start switch 115
3 4 4 Start-up 115
3 4 5 Cold weather starting 116
3 4 6 Information about the various operating modes of the SCR Technology engine 117
3 4 7 Stopping the engine 12 0
3 4 8 Engine speed 12 0
3 5 Transmission 122
3 5 1 Presentation of the different driving modes 12 2
3 5 2 Clutch function 12 2
3 5 3 PowerShuttle 12 3
3 5 4 Adjusting the start ratios ( 1A 1B , 1C etc ) 12 6
3 5 4 1 Setting procedure: 12 6
MF5600 – Operation
7060711M3
Table of contents
3 5 4 2 Starting ratio 12 7
3 5 5 Lever mode (Speedmatching) 12 7
3 5 6 Pedal mode (AutoDrive) 13 0
3 5 7 Road mode (Hare)/Field mode (Tortoise) 13 2
3 5 8 Changing the transmission ratios ( 1A , 1B , 1C etc ) 13 4
3 5 9 Optional creeper range (snail) 13 4
3 5 10 Tractor towing 13 5
3 5 11 Forward speed calibration 13 5
3 6 Brakes 137
3 6 1 Brake pedals 13 7
3 6 2 Hydraulic trailer brake 13 7
3 6 3 Pneumatic trailer brake 13 8
3 6 4 Parking brake 13 9
3 7 Front axle 14 1
3 7 1 Four-wheel drive front axle 14 1
3 7 2 Suspended front axle 14 2
3 7 3 Permissible load on the front axle 14 3
3 8 Differential lock 14 5
3 8 1 Differential lock 14 5
3 9 Power take-off 14 7
3 9 1 Front power take-off 14 7
3 9 2 Rear power take-off (PTO) 14 8
3 9 2 1 Selecting the power take-off speed 14 8
3 9 2 2 Engaging PTO in manual mode: 14 9
3 9 2 3 Engaging PTO in automatic mode: 15 0
3 9 3 Economy PTO 15 0
3 9 4 GSPTO (optional) 15 1
3 9 5 Changing the flanged shaft 15 2
3 9 6 PTO external control 15 2
3 9 7 Power take-off electronic controls 15 3
3 9 8 Power take-off protection 15 4
3 10 Linkage 156
3 10 1 General 15 6
3 10 2 Rear linkage electronic controls 15 6
3 10 3 Rear linkage operation 15 8
3 10 4 Rear linkage external controls 16 3
3 10 5 Front linkage 16 3
3 10 6 Top link 16 8
3 10 7 Bottom links 17 0
3 10 8 Lift rods 17 1
3 10 9 Stabilisers 17 2
3 10 9 1 Stabilisers with manual telescopic adjustment 17 2
3 10 9 2 Automatic stabilisers 17 4
3 11 Towing equipment 17 6
3 11 1 General 17 6
3 11 2 Swinging drawbar 17 7
3 12 Auxiliary hydraulics 17 9
3 12 1 General 17 9
3 12 2 Description of mechanically controlled hydraulic couplers on Open Center
system 17 9
3 12 3 Use of mechanically controlled hydraulic couplers on Open Center system 18 0
3 12 4 Description of hydraulic couplers on Open Center system 18 4
3 12 5 Use of hydraulic couplers on Open Center system 18 6
3 12 6 Description of mechanically-controlled hydraulic couplers on Closed Center
system (Load Sensing) 19 0
3 12 7 Use of mechanically-controlled hydraulic couplers on Closed Center system
(Load Sensing) 19 2
MF5600 – Operation
7060711M3
Table of contents
3 12 8 Auxiliary hydraulics locking/unlocking 19 6
3 12 9 Description and use of the cab controls 19 8
3 12 10 Hydraulics control lever 2 0 1
3 12 11 Open Centre 10 0 I/min ( 2 6 4 gal/min (US)) 2 0 2
3 12 11 1 Pump coupling (combined flow) 2 0 2
3 12 11 2 Pump uncoupling 2 0 3
3 12 12 Setting flow rates and time delay 2 0 3
3 13 Front-end loader function 20 6
3 13 1 Front-end loader 2 0 6
3 13 2 Layout of components 2 0 6
3 13 3 Using the mechanical joystick of the front-end loader 2 0 7
3 13 3 1 Locking/unlocking the front-end loader control 2 0 7
3 13 3 2 Joystick in working position 2 0 7
3 13 3 3 Joystick in rest position 2 0 8
3 13 3 4 Joystick functions for the front-end loader 2 0 8
3 13 3 5 Electrical functions for the front-end loader 2 0 8
3 13 3 6 Floating position 2 0 9
3 13 3 7 3rd and 4th functions 2 0 9
3 13 3 8 Arm suspension 2 10
3 13 3 9 Locking and unlocking accessories 2 10
3 13 4 Using the electric joystick of the front-end loader 2 10
3 13 4 1 Activating the front-end loader 2 10
3 13 4 2 Joystick functions for the front-end loader 2 11
3 13 4 3 Floating position 2 11
3 13 4 4 Display of front-end loader flow rates 2 12
3 13 4 5 3rd and 4th functions 2 14
3 13 4 6 Arm suspension 2 15
3 13 4 7 Locking and unlocking accessories 2 15
3 13 4 8 Automatic shaking function for the implement 2 16
3 14 Lighting 217
3 14 1 Main lighting control module 2 17
3 14 2 Work lights module 2 18
3 15 Front wheels and track widths 220
3 15 1 Wheel studs 2 2 0
3 15 2 Installation points of the axle stands 2 2 0
3 15 3 Front track width: Two-wheel drive front axle 2 2 1
3 15 4 Front track width: Four-wheel drive front axle 2 2 3
3 15 5 Adjusting the 4WD front axle stops 2 2 5
3 15 5 1 Fitting the oscillation stops 2 2 6
3 15 5 2 Adjusting the steering angle 2 2 6
3 15 5 3 Toe-in check 2 2 6
3 15 5 4 Adjusting the front fenders Shoe side adjustment on the front axle 2 2 7
3 15 5 5 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 2 7
3 15 5 6 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 2 7
3 15 6 Tires 2 2 8
3 15 7 Tire pressures 2 2 8
3 16 Rear wheels and track widths 229
3 16 1 Wheel studs 2 2 9
3 16 2 Installation points of the axle stands 2 2 9
3 16 3 Rear track width with flanged shafts 2 3 0
3 17 Dual wheels 233
3 17 1 Dual wheels 2 3 3
3 18 Ballast 235
3 18 1 Liquid ballasting 2 3 5
3 18 2 Front-end weight 2 3 5

MASSEY FERGUSON EU TRACTOR MF5600 SERIES MF5611 MF5612 MF5613 CLASSIC OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V