Massey Ferguson EU Tractor MF7700 Series MF7715 7716 7718 Dyna-VT Tractor Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Tractor MF7700 Series MF7715 7716 7718 Dyna-VT Tractor Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Tractor MF7700 Series MF7715 7716 7718 Dyna-VT Tractor Operator’s Manual – PDF DOWNLOAD

FOREWORD:

• We would like to welcome you to the ever-growing number of people who own a Massey Ferguson tractor; people who appreciate quality. We are proud of every tractor that leaves our factories, each being technically advanced and of a high quality. This Operator’s Manual contains the specifications for your new tractor. Please ensure that all operators read the instructions and follow them carefully.
• The pages that follow contain vital information on your tractor; please read them carefully. This Operator’s Manual contains the specifications for your new equipment. Please ensure that all operators read the instructions and follow them carefully. This will allow you to benefit from a long service life with complete safety and peace of mind. The pages that follow contain vital information about your new equipment; please read them carefully.
• Your Massey Ferguson dealer will guarantee you quality servicing and will provide you with all the assistance you need. When it comes to servicing, remember that your dealer knows your tractor best and that he wants you to be completely satisfied. Your Massey Ferguson dealer will guarantee you all the assistance you need. Please leave this Operator’s Manual in the tractor if resold. The subsequent owner will need the information it contains.
• All information and specifications in this manual are up to date at the time of publication. However, our ongoing policy to improve our products obliges us to reserve the right to make alterations at any time without notice. Please note that this manual relates to all models and refers to both standard and optional equipment. You may therefore find details relating to equipment that is not fitted on your tractor. This Operator’s Manual complies with Directive 2 0 10/ 5 2 EC.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF7700 Series MF7715 7716 7718 Dyna-VT Tractor Operator’s Manual – PDF DOWNLOAD

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 1 3
1 2 Your tractor identification details 14
1 2 1 Your tractor identification details 1 4
2 Safety instructions and safety points – Warranty 15
2 1 Introduction 17
2 1 1 Introduction – Safety instructions 17
2 2 Safety – Symbols and terms 19
2 2 1 Safety – Symbols and terms 19
2 3 Safety decals and instructions 20
2 3 1 Checking and replacing the safety decals and instructions 2 0
2 3 2 Presentation and location of the safety decals and instructions 2 1
2 4 General safety instructions 25
2 4 1 Awareness of the safety instructions and symbols 2 5
2 4 2 Operator familiarity in the use of the tractor 2 5
2 4 3 Filling the fuel tank 2 6
2 4 4 Mounting and dismounting the operator’s seat 2 6
2 4 5 Mandatory procedure before dismounting the tractor 2 7
2 5 Special instructions 28
2 5 1 Specific recommendations for agricultural and forestry tractors 2 8
2 6 Special safety instructions for preparing the tractor for use 30
2 6 1 Protective clothing 3 0
2 6 2 Activated carbon filter information 3 0
2 6 3 Safety devices and items 3 3
2 6 4 Checking the tractor 3 3
2 7 Specific safety instructions for starting the tractor 35
2 7 1 Protection of persons other than the operator 3 5
2 7 2 Start up safely 3 5
2 7 3 Starting the tractor with jump start cables 3 6
2 7 4 Checks to be carried out after start-up 3 7
2 8 Specific safety instructions for using the tractor 38
2 8 1 General instructions 3 8
2 8 2 Protection of persons other than the operator 3 9
2 8 3 Overturning 3 9
2 8 4 Tractor towing 4 2
2 8 5 Regulatory data on maximum permitted trailed weights 4 2
2 8 6 Road use 4 4
2 8 7 Parking brake 4 5
2 8 8 Emergency hand brake (on models fitted with the Parklock option) 4 5
2 8 9 Power take-off 4 5
2 8 10 Implements 4 6
2 8 11 Front-end loader 4 9
2 9 Specific safety instructions for servicing the tractor 50
2 9 1 Pollution warning to observe when servicing the tractor 5 0
2 9 2 General instructions 5 0
2 9 3 Handling instructions 5 1
2 9 4 Special instructions for cleaning the tractor 5 3
2 10 Protective structures 54
Operation – MF 7700
ACT0010048_ed2
Table of contents
2 10 1 Protective structures – Use and accreditation 5 4
2 10 2 Cab 5 4
2 10 3 Seat belt 5 4
2 10 4 Instructor seat 5 5
2 11 Warranty 5 6
2 11 1 General 5 6
2 11 2 Pre-delivery inspection and commissioning on the user’s premises 5 6
2 11 3 Warranty procedure 5 6
2 11 4 Procedure to follow if changing region 5 6
2 11 5 Servicing during and after the warranty period 5 7
3 Usage 59
3 1 Operator environment 63
3 1 1 Steering console 63
3 1 2 Instrument panel 6 4
3 1 3 Control unit 70
3 1 4 Pedals 71
3 1 5 Steering wheel 71
3 1 6 Operator presence detector 72
3 1 7 Automatic adjustment pneumatic seat 75
3 1 8 Instructor seat 8 1
3 1 9 Right-hand console 8 2
3 1 10 Command Control Armrest 8 2
3 1 11 Right-hand pillar 8 4
3 1 12 Left-hand console 8 5
3 1 13 Upper console 8 6
3 1 14 Manual air conditioning 8 8
3 1 15 Automatic air conditioning 93
3 1 16 Additional heater 9 9
3 1 17 Accessories sockets 10 0
3 1 18 Emergency exits 10 1
3 1 19 Sun visor 10 2
3 1 20 Roof hatch 10 3
3 1 21 Wheel chock(s) (optional) 10 4
3 2 Setup and Information Screen control screens on the instrument
panel 106
3 2 1 Using the Setup and Information Screen 10 6
3 2 2 Setup and Information screens 10 8
3 3 Body 116
3 3 1 Opening the bonnet 116
3 3 2 Adjusting the external rear-view mirrors 116
3 3 2 1 Positioning the arms 116
3 3 2 2 Adjusting the arm extensions (depending on model) 117
3 3 2 3 Rear-view mirror with manual adjustment 117
3 3 2 4 Rear-view mirror with electric adjustment 117
3 4 Engine 119
3 4 1 Running-in 119
3 4 2 Filling with fuel 119
3 4 3 Start switch 121
3 4 4 Start-up 121
3 4 5 Starting the SCR Technology engine in cold weather 122
3 4 6 Information about the various operating modes of the SCR Technology engine 124
3 4 7 Stopping the engine 129
3 4 8 Engine speed 129
3 4 9 Storing engine speeds 13 1
3 5 Transmission 133
3 5 1 Presentation of the different driving modes 13 3
Operation – MF 7700
ACT0010048_ed2
Table of contents
3 5 2 Clutch function 13 3
3 5 3 PowerShuttle 13 5
3 5 4 Setting start-up speeds 13 7
3 5 4 1 Start speeds 13 7
3 5 5 Storage of forward speeds 13 8
3 5 6 Engine underspeed supervisor 14 0
3 5 7 Lever mode 14 1
3 5 8 Pedal mode 14 3
3 5 8 1 Pedal Mode in winter conditions (on frozen or snow-covered ground) 14 5
3 5 9 Self-propelled mode 14 5
3 5 10 Road mode (Hare) /Field mode (Tortoise) 14 6
3 5 11 Changing forward speed 14 7
3 5 12 Tractor towing 14 8
3 5 13 Tractor limp home mode 14 9
3 5 14 Forward speed calibration 15 1
3 6 Brakes 153
3 6 1 Brake pedals 15 3
3 6 2 Hydraulic trailer brake 15 3
3 6 3 Pneumatic trailer brake 15 4
3 6 4 Parking brake 15 5
3 7 Steering 157
3 7 1 Steering 15 7
3 8 Front axle 160
3 8 1 Four-wheel drive front axle 160
3 8 2 Suspended front axle 16 1
3 8 3 Permissible load on the front axle 16 3
3 9 Differential lock 166
3 9 1 Differential lock 16 6
3 10 Power take-off 168
3 10 1 Front power take-off 16 8
3 10 2 Rear power take-off (PTO) 16 9
3 10 2 1 Selecting the power take-off speed 170
3 10 2 2 Engaging PTO in manual mode: 170
3 10 2 3 Engaging PTO in automatic mode: 170
3 10 3 Economy PTO 171
3 10 4 GSPTO (optional) 172
3 10 5 Changing the flanged shaft 172
3 10 5 1 Changing the shaft 172
3 10 6 PTO external control 173
3 10 7 Power take-off electronic controls 174
3 10 8 Power take-off protection 174
3 11 Linkage 176
3 11 1 General 176
3 11 2 Rear linkage electronic controls 176
3 11 3 Rear linkage operation 178
3 11 4 Rear linkage external controls 18 3
3 11 5 Front linkage 18 4
3 11 6 Top link 18 8
3 11 7 Bottom links 190
3 11 8 Lift rods 19 1
3 11 9 Stabilizers 19 3
3 11 9 1 Stabilizers with manual telescopic adjustment 19 3
3 11 9 2 Automatic stabilizers 19 4
3 11 10 Ball joint support 19 5
3 12 Towing equipment 196
3 12 1 General 19 6
3 12 2 Swinging drawbar 19 7
Operation – MF 7700
ACT0010048_ed2
Table of contents
3 12 2 1 Fitting the swinging drawbar 19 9
3 12 3 Ball coupling 20 0
3 12 3 1 Ball coupling 20 1
3 12 4 Drawbar with stud 20 1
3 12 4 1 Hitching the trailer 20 3
3 12 5 4-wheel trailer clevis hitch 20 3
3 12 6 Pick-up hitch 20 5
3 12 6 1 Lowering the hook 20 5
3 12 6 2 Lifting the hook 20 6
3 12 6 3 Fitting the swinging drawbar 20 7
3 13 Auxiliary hydraulics 209
3 13 1 General 20 9
3 13 2 Description of hydraulic couplers on Closed Center system (Load Sensing) 20 9
3 13 3 Use of hydraulic couplers on Closed Center system (Load Sensing) 211
3 13 4 Auxiliary hydraulics locking/unlocking 216
3 13 5 Hydraulics control lever 217
3 13 6 Description and use of the cab controls 218
3 13 7 Description and use of the external controls 225
3 13 8 Setting flow rates and time delay 225
3 13 9 Emergency manual spool valve control 227
3 14 Standard front-end loader function 228
3 14 1 Front-end loader 2 2 8
3 14 2 Layout of components 2 2 8
3 14 3 Standard front-end loader connection 2 2 9
3 14 4 Using the electric joystick of the standard front-end loader 2 3 0
3 14 4 1 Joystick functions for the standard front-end loader 2 3 0
3 14 4 2 Floating position with the standard front-end loader 2 3 0
3 14 4 3 Displaying the flow rates of the standard front-end loader 2 3 1
3 14 4 4 Arm suspension on the standard front-end loader 2 3 3
3 14 4 5 Locking and unlocking standard front-end loader accessories 2 3 3
3 14 4 6 Standard front-end loader/engine speed automation 2 3 4
3 14 4 7 3rd and 4th functions of the standard front-end loader 2 3 4
3 14 4 8 Automatic shaking function of the standard front-end loader implement 2 3 5
3 15 Front-end loader function with 3rd function option 236
3 15 1 Front-end loader 2 3 6
3 15 2 Layout of components 2 3 6
3 15 3 Front-end loader connection with 3rd function option 2 3 7
3 15 4 Using the front-end loader electric joystick with the 3rd function option 2 3 8
3 15 4 1 Joystick functions for the front-end loader with the 3rd function option 2 3 8
3 15 4 2 Floating position of the front-end loader with the 3rd function option 2 3 8
3 15 4 3 Displaying the front-end loader flow rates with the 3rd function option 2 3 9
3 15 4 4 Arm suspension on the front-end loader with the 3rd function option 24 1
3 15 4 5 Locking and unlocking front-end loader accessories with the 3rd function
option 24 1
3 15 4 6 Front-end loader/engine speed automation with the 3rd function option 24 2
3 15 4 7 Automatic shaking function for the front-end loader implement with the
3rd function option 24 2
3 15 5 Unhitching the front-end loader with the 3rd function option 24 2
3 16 Lighting 244
3 16 1 Main lighting control module 24 4
3 16 2 Work lights module 24 5
3 17 Suspended cab 247
3 17 1 S uspended cab 24 7
3 18 Front tires and track widths 250
3 18 1 Wheel studs 25 0
3 18 2 Installation points of the axle stands 25 0
3 18 3 Adjusting the front wheel track width 25 1
Operation – MF 7700
ACT0010048_ed2
Table of contents
3 18 4 Adjusting the 4WD front axle stops 25 4
3 18 4 1 Fitting the oscillation stops 25 4
3 18 4 2 Adjusting the steering angle 25 4
3 18 4 3 Toe-in check 25 5
3 18 4 4 Adjusting the front fenders Shoe side adjustment on the front axle 25 5
3 18 4 5 Adjusting the front fenders Adjusting the height of the support on the
shoe 25 5
3 18 4 6 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 25 6
3 18 5 Tires 25 6
3 18 6 Tire pressures 25 6
3 19 Rear tires and track widths 257
3 19 1 Wheel studs 25 7
3 19 2 Installation points of the axle stands 25 7
3 19 3 Rear track width with flanged shafts 25 8
3 19 4 Rear track width with short straight shafts 260
3 19 5 Rear track width with long straight shafts 2 6 2
3 19 6 Adjusting the rear wheel track width 2 6 5
3 19 6 1 Adjustment o f wheel position o n the straight shaft 266
3 19 6 2 Adjustment of wheel position on the straight shaft 266
3 20 Dual wheels 268
3 20 1 Dual wheels 268
3 20 2 Installation points of the axle stands 269
3 20 3 Dual rear wheel track width with short straight shafts 270
3 20 4 Dual rear wheel track width with long straight shafts 274
3 20 5 Adjusting the rear wheel track width 279
3 20 5 1 Adjustment of wheel position on the straight shaft 279
3 20 5 2 Adjustment of wheel position on the straight shaft 28 0
3 21 Ballast 28 1
3 21 1 Liquid ballasting 28 1
3 21 2 Front-end weight 28 1

MASSEY FERGUSON EU TRACTOR MF7700 SERIES MF7715 7716 7718 DYNA-VT TRACTOR OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected].

S.V