Massey Ferguson Harvesting MF 7360 – MF 7370 Combines Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson Harvesting MF 7360 – MF 7370 Combines Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson Harvesting MF 7360 – MF 7370 Combines Operator’s Manual – PDF DOWNLOAD

MF 7360 – S/N => 553910019
MF 7360 PUPL/- S/N => 554010025
MF 7370 – SIN => 564010083
MF 7370 PL -S/N => 564110054

Introduction :

• Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw оп the ground. This Operator’s Manual should Ье used as а practical reference guide: lt contains all the necessary practical information for the operation, adjustment and maintenance of your new machine.
• Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in а wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and Ьу your Dealer, to ensure you receive it in perfect condition. То keep the comЬine in perfect condition and to ensure trouЫe-free performance, the periodical maintenance operations listed in this manual should Ье carried out at the recommended intervals.
• Before operating and/or driving the comblne, read this Operator’s Manual carefully, paying particular attention to the section оп safety rules. Always keep this manual оп hand for further reference. The terms “left” and “right” are always used with reference to the machine traveling direction. Should you require further information about the machine, please do not hesitate to contact your authorized Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any proЫems that may arise.

Spare parts and accessories :

• The genuine sраге parts and accessories have Ьееп specifically designed fог this type of machine. Only genuine parts supplied Ьу уоuг authorized Dealer сап guarantee соггесt operation and optimum регfогmапсе. Never use non-genuine sраге parts ог accessories: Some accessories (e.g. РТО shafts, straw choppers, taЫes) require ап ЕС certification, which сап Ье provided only Ьу the manufacturer ог his qualified and recognized sub-suppliers.
• Non-genuine sраге parts have not Ьееп tested and аге not authorized Ьу the manufacturer. The use of such equipment may have а damaging effect оп the design features of the machine and may even jeopardize operational safety. The manufacturer disclaims all liabllity in the event of loss or damage arising as а result of nongenuine parts or accessories being fitted. lt is expressly prohibited to make апу modification to the combine without the ргiог written authorisation Ьу the manufacturer. When ordering sраге parts and/or optional equipment, always quote уоuг comЬine model and serial number (see chapter Comblne identification).

TABLE OF CONTENTS:

Massey Ferguson Harvesting MF 7360 – MF 7370 Combines Operator’s Manual – PDF DOWNLOAD

1 General lnformation 15
1 1 lnformation 11
1 1 1 lntroduction 17
1 1 2 Company policy 17
1 1 3 Optional equipment 17
1 1 4 Spare parts and accessories 18
1 1 5 Warranty 18
1 1 6 Lubricants 18
1 2 Use of the comblne 20
1 3 ldentification 22
1 3 1 ComЬine identification 2 2
1 3 2 Engine ldentification 2 3
1 3 3 Cutting tаЫе identification 2 4
1 3 4 Operator seat identification 2 4
1 3 5 Hydrostatic pump identification 2 5
1 3 6 Hydrostatic motor identification 2 5
1 3 7 Straw chopper identification (if fitted) 2 6
1 3 8 Chaff spreader identification (if fitted) 2 6
1 3 9 Trailer hitch identification (if fitted) 27
1 4 ldentification form 28
1 4 1 Machine data 28
1 5 Conformity 29
1 5 1 ЕС Declaration of Conformity 2 9
1 6 lnformation 30
1 6 1 Ecology 30
1 6 2 Hydraulic systems: hoses 30
1 6 3 Scrapping and disposal 3 1
1 7 Weight 32
1 7 1 Weight distribution 3 2
2 Safety 35
2 1 Warning symbols and safety instructions 37
2 1 1 Warnings 37
2 2 lnformation for road transport 38
2 2 1 Road transport 38
2 3 lnformation for operations 41
2 3 1 Field Operations 4 1
2 4 lnformation for maintenance 45
2 4 1 Maintenance work 4 5
2 5 lnformation оп the engine 49
2 5 1 Engine 4 9
2 6 Leveling information 53
2 7 Safety and function decals 54
2 7 1 Location of decals 5 4
2 7 2 Description of decals 57
2 8 Work оп the battery 69
2 8 1 Battery 6 9
2 9 Safety devices 70
2 9 1 Emergency exit 70
ComЬines
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
2 9 2 Орегаtог presence device 7 1
2 9 2 1 Returning the machine to normal operation 7 2
2 9 3 Safety belts 7 3
2 9 4 Cutting tаЫе safety stops 7 4
2 9 5 Safety guard fог main сгор elevator 7 5
2 9 6 Sprags fог wheels 7 5
2 9 7 AudiЫe alarm fог reversing 7 6
2 9 8 Reflectors fог гоаd transport 7 7
2 9 9 Safety Guards 7 8
2 9 1О Fall protection rails 7 8
2 9 11 Safety devices fог operations to Ье саггiеd out in the uррег рагt of the machine 80
2 9 12 Stгaw сhоррег 8 1
2 9 13 Fire extinguisher 8 1
2 10 Trailer hitch 82
2 10 1 Automatic towing hooks 8 2
2 10 2 CUNA and СЕ trailer hitches 8 3
2 10 2 1 Ргосеduге fог attaching and removing 8 4
2 10 2 2 DгаwЬаг coupling 8 5
2 10 3 ROCKINGER trailer hitch 8 5
2 10 3 1 Removal 8 5
2 10 3 2 DгаwЬаг coupling 8 6
2 10 4 Fixed trailer hitch (non-automatic – CUNA type) 8 7
2 11 Machine lifting 88
2 11 1 Attachment points 8 8
2 12 Towing 89
2 12 1 Towing the combine 89
2 13 Further information 90
2 13 1 Noise level in the саЬ 90
2 13 2 Vibrations in the саЬ 90
2 13 3 Statutoгy regulations 90
2 13 4 Electromagnetic emissions 9 1
2 14 Notes 92
2 14 1 Notes fог гоаd transport 9 2
3 Operation 95
3 1 Comblne operation 97
3 1 1 Сгор processing 9 7
3 2 Stage 1 98
3 2 1 Feeding 9 8
3 3 Stage 2 99
3 3 1 Threshing 9 9
3 4 Stage 3 1 оо
3 4 1 Separation 100
3 5 Stage 4 101
3 5 1 Cleaning 10 1
3 6 Stage 5 102
3 6 1 Grain storage and unloading 10 2
3 7 Transmission 103
3 7 1 Rear-wheel drive 10 3
3 8 Leveling 104
3 8 1 Cross leveling 10 4
3 8 2 Cross and longitudinal leveling (MF 7 3 6 0 PLI model only) 10 4
4 Controls and lnstruments 105
4 1 Steering column 109
ComЬines
MF 7360-7370_EN_LA327316015
4 2
ТаЬ/е of contents
4 1 1 Adjustments 109
4 1 2 lgnition switch 11О
4 1 3 Direction indicators 111
Brakes 112
4 2 1 Service brakes 112
4 2 2 Park brake 112
4 3 Multifunction lever 114
4 3 1 Main components 114
4 3 2 Push buttons оп the multifunction lever 115
4 4 Gear shift lever and reversing lever 111
4 4 1 General lnformation 117
4 5 lnstrument panel 119
4 5 1 Components (MF 7 3 6 0 – MF 7 3 70 models) 119
4 5 2 Components (MF 7 3 6 0 PL – MF 7 3 70 PL models) 120
4 5 3 Components (MF 7 3 6 0 PLI model) 12 1
4 5 4 Armrest 12 2
4 5 5 Throttle control 12 2
4 5 6 Switch for threshing mechanism and straw chopper 12 3
4 5 7 Switch for feed mechanism engagement 12 3
4 5 8 Switch for rear-wheel drive 12 4
4 5 9 Toggle switch for parking brake 12 4
4 5 1О Miscellaneous push buttons 12 5
4 5 11 Push button for road transport mode 12 5
4 5 12 Switch for cross leveling mode 12 6
4 5 13 Toggle switch for machine front position 12 6
4 5 14 Toggle switch for cross leveling 12 7
4 5 15 Switch for longitudinal levelling mode control 12 7
4 6 Computer 128
ComЬines
4 6 1 Description 12 8
4 6 1 1 Screen 12 8
4 6 1 2 Push buttons and knob 12 9
4 6 2 Main function controls 130
4 6 2 1 Activated device checks 13 1
4 6 2 2 Meaning of the symbols: 13 2
4 6 3 Machine information 13 3
4 6 4 ComЬine main menu 13 4
4 6 5 Machine settings and performance control 13 5
4 6 6 Setting straw chopper deflectors 13 6
4 6 7 Monitoring performance and returns 13 7
4 6 8 Header settings 13 8
4 6 8 1 Header configuration 13 8
4 6 8 2 Advanced header settings 139
4 6 8 3 Header settings 1 4 0
4 6 9 Reel 14 1
4 6 1О Automatic controls 14 2
4 6 11 Preset height 14 3
4 6 12 Automatic height 14 5
4 6 13 Field pressure 14 7
4 6 14 Lateral floatation 14 8
4 6 15 Header compensation (only MF 7 3 6 0 PLI model) 14 9
4 6 16 Automatic control comЬinations 14 9
4 6 16 1 Pre-set height and Automatic height 150
4 6 16 2 Pre-set height and Field pressure 15 2
4 6 16 3 Pre-set height and Lateral flotation 15 2
4 6 16 4 Pre-set height, Automatic height and Field pressure 15 3
4 6 16 5 Pre-set height, Automatic height and Lateral flotation 15 5
4 6 16 6 Pre-set height, Field pressure and Lateral floatation 15 5
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
4 6 16 7 Pre-set height, Automatic height, Field pressure and Lateral floatation
(recommended setting) 15 6
4 6 16 8 Automatic height and Field pressure 15 7
4 6 16 9 Automatic height and Lateral flotation 159
4 6 16 1О Automatic height, Field pressure and Lateral floatation 159
4 6 16 11 Field pressure and Lateral floatation 16 0
4 6 17 Settings for harvesting specific crops 16 1
4 6 18 Levelling combine settings 16 2
4 6 19 Maintenance & calibration 16 3
4 6 19 1 Calibrations 16 4
4 6 19 2 1 nformation оп the management system 16 5
4 6 19 3 System setup 16 6
4 6 2 0 Еггог codes 16 9
4 6 2 1 Diagnostics 17 1
4 6 2 2 Meters 17 5
4 6 2 3 Display adjustment 17 6
4 6 2 3 1 Night-time screen brightness 17 7
4 6 2 3 2 Screen calibration 17 8
4 6 2 3 3 Cleaning the screen 17 9
4 6 2 4 Additional information 1 8 0
4 6 2 5 Camera 1 8 4
4 7 СаЬ 185
4 7 1 Main components 1 8 5
4 7 2 Air conditioning 1 8 6
4 7 2 1 Control unit 1 8 6
4 7 2 2 Compressor 1 8 7
4 7 2 3 Condenser 1 8 7
4 7 2 4 Expansion valve – evaporator 188
4 7 3 Pressurization and heating 188
4 7 4 СаЬ controls 19 0
4 7 4 1 Rear-view mirrors 19 4
4 7 5 СаЬ seats 19 5
4 7 6 Other саЬ components 19 7
4 7 6 1 Refrigerator 19 7
4 7 6 2 Document Pocket 19 7
4 7 6 3 Sun visor 19 8
4 7 6 4 Rear СаЬ Window 19 9
4 7 6 5 Reading light 19 9
4 7 6 6 Footrest 2 00
4 7 6 7 Preparation for radio installation 2 00
4 8 Access to comblne components 201
4 8 1 Access to the operator platform 2 01
4 8 2 Access to and cleaning of the front windshield of the саЬ 2 02
4 8 3 Cleaning the rear-view mirrors 2 03
4 8 4 Cleaning the camera 2 04
4 8 5 Access to the engine compartment 2 04
4 8 6 Access to the grain tank 2 06
4 8 7 Access to the inside of the grain tank 2 07
4 9 Engine 208
4 9 1 Starting the engine 2 08
4 9 2 Useful advice 2 09
4 9 3 Stopping the engine 2 10
4 10 Road transport 211
4 11 Using the comblne 214
4 11 1 Operations to Ье carried out before use 2 14
5 Field Operations 215
ComЬines
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
5 1 General lnformation 211
5 1 1 Notes 2 17
5 1 2 Before operating the machine in the field 2 17
5 2 Starting and Stopping the Comblne 219
5 2 1 Procedure to follow 2 19
5 3 Cutting tаЫе 221
5 3 1 Attaching and removing the tаЫе 2 2 1
5 3 2 ТаЫе lateral floatation 2 2 5
5 4 Main Crop Elevator 227
5 4 1 Adjustments 2 27
5 4 1 1 Access to the main components 2 29
5 4 1 2 P F R – Finger feed roller 230
5 4 2 Reverse drive system 23 1
5 4 3 Stone trap 23 2
5 4 3 1 Stone trap assemЬly removal/refitting 233
5 5 Cylinder Housing 235
5 5 1 Threshing drum 23 5
5 5 1 1 UnЫocking the cylinder 236
5 5 2 Concave 237
5 5 2 1 Concave filler plates 238
5 5 2 2 Parallelism between the cylinder and concave 240
5 5 2 3 Universal wheat/maize concave 24 1
5 5 2 4 Basic settings – universal concave 24 2
5 5 2 5 Spike-toothed Cylinder/Concave (for rice) 243
5 5 3 Rear beater 244
5 6 Multi-Crop Separator (MCS) 246
5 6 1 Operational description 246
5 6 2 Checking the concave position 247
5 6 3 Disengaging the Multi Crop Separator concaves 248
5 6 4 Multi Crop Separator speed 249
5 7 Straw walkers 251
5 7 1 Description and adjustments 2 5 1
5 8 Main Grain Рап 253
5 8 1 Description 2 53
5 8 2 Checking the main grain рап 2 54
5 8 3 Cleaning the main grain рап 2 54
5 9 Fanning Mill 256
5 9 1 Description and adjustments 2 56
5 9 1 1 Fanning mill for threshing light seed crops 2 58
5 10 Тор sieve 259
5 10 1 Adjustment 2 59
5 11 Bottom sieve 263
5 1 1 1 Adjustment 263
5 12 Tailings 265
5 1 2 1 Description and adjustments 26 5
5 13 Grain tank 267
ComЬines
5 13 1 Description 267
5 13 1 1 Grain tank unloading auger 267
5 13 1 2 Sensors to check tank filling 268
5 13 1 3 Grain tank control window 269
5 13 1 4 Doors for Grain Tank Maintenance and Cleaning 270
5 13 1 5 Vertical auger tank drain door 271
5 13 1 6 Tank bottom door 271
5 13 1 7 Grain Tank Cover 272
5 13 2 Basic Settings 275
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
6 Lubrication and Maintenance 277
6 1 General lnformation 279
6 1 1 Lubricatioп апd Маiпtепапсе 2 7 9
6 2 Preliminary Service lnspection 281
6 2 1 After the first 50 workiпg hours 2 8 1
6 3 Scheduled Service lnspection 282
6 3 1 Operatioп апd adjustmeпt 2 8 2
6 3 2 Wheп апd where to carry it out 2 8 3
6 3 3 lпterval – 1О hours 2 8 8
6 3 3 1 Hydraulic апd hydrostatic systems taпk (1) 2 8 8
6 3 3 2 Епgiпе oil (2) 2 89
6 3 3 3 Threshiпg drum variator (3) 2 90
6 3 3 4 Coolaпt ехрапsiоп taпk (4) 2 90
6 3 3 5 Prefilter/water separator (5) 2 9 1
6 3 3 6 Straw chopper rotor (6) 2 9 1
6 3 4 lпterval – 50 hours 2 9 2
6 3 4 1 Rear axle support (11) 2 9 2
6 3 4 2 ТаЫе drive-belt teпsioпer (12) 2 9 2
6 3 4 3 Service brakes (13) 2 9 3
6 3 4 4 СаЬ air filters (14) 2 9 3
6 3 4 5 Fаппiпg mill variator (15) 2 9 5
6 3 4 6 Coupliпg bushes of fiпal drive shafts (16) 2 9 6
6 3 4 7 Rear-axle kiпg piпs (17) 2 9 7
6 3 4 8 Evaporator (18) 2 9 7
6 3 4 9 Сопdепsег (19) 2 9 8
6 3 4 1О Епgiпе radiator апd hydraulic oil radiator (20) 2 9 9
6 3 4 11 Adjustiпg the rotary sсгееп brushes апd aspirator brushes 300
6 3 4 12 Graiп-taпk filliпg auger gearbox (2 1) 30 1
6 3 4 13 Track frames (2 2) 30 2
6 3 4 14 Rear straw walker shaft supports (2 3) 30 3
6 3 5 lпterval – 100 hours 30 4
6 3 5 1 Uпloadiпg auger bottom gearbox (3 1) 30 4
6 3 5 2 Crop-uпloadiпg auger drive belt teпsioпer (3 2) 30 5
6 3 5 3 Маiп crop-elevator belt teпsioпer (3 3) 30 5
6 3 5 4 Chaff spreader drive (if iпstalled) (3 4) 30 6
6 3 5 5 Crop uпloadiпg-auger coпtrol cyliпder (3 5) 30 6
6 3 5 6 Маiп сгор elevator adapter (3 6) 30 7
6 3 5 7 MCS belt teпsioпer (3 7) 30 7
6 3 5 8 Threshiпg-mechaпism belt teпsioпer (3 8) 30 8
6 3 5 9 Hydrostatic-pump belt teпsioпer (39) 30 8
6 3 5 1О СаЬ access ladder (40) 309
6 3 5 11 Tires (4 1) 309
6 3 5 12 Маiп crop elevator supports (4 2) 3 1О
6 3 5 13 Rear wheel 4W D tie rod (if fitted) (4 3) 3 11
6 3 5 14 Епgiпе (4 4) 3 11
6 3 5 15 Епgiпе air filter (4 5) 3 12
6 3 5 16 Froпt levelliпg (4 6) 3 13
6 3 5 17 Rear levelliпg coпtrol cyliпders (MF 7 3 6 0 PLI model опlу) (4 7) 3 14
6 3 5 18 Cuttiпg tаЫе levelliпg cyliпders (4 8) 3 14
6 3 6 lпterval – 2 50 hours 3 15
6 3 6 1 Gearbox (6 1) 3 15
6 3 6 2 Reductioп gearbox (6 2) 3 15
6 3 6 3 Маiп clutch (6 3) 3 16
6 3 6 4 Uпloadiпg auger support (6 4) 3 16
6 3 6 5 Straw chopper driveп-belt teпsioпer (6 5) 3 17
6 3 6 6 Straw chopper drive-belt teпsioпer (6 6) 3 17
ComЬines
MF 7360-7370_EN_LA327316015
6 4
6 5
ТаЬ/е of contents
6 3 6 7 Straw chopper idler shaft (6 7) 3 18
6 3 6 8 Tank unloading-auger clutch (6 8) 3 18
6 3 6 9 Aspirator drive-belt tensioner (6 9) 3 19
6 3 6 1О Rotary-screen belt tensioner (70) 3 19
6 3 6 11 Windshield wash fluid reservoir (7 1) 3 20
6 3 6 12 Engine oil and filters (7 2) 3 20
6 3 6 13 Tailing-auger left support (7 3) 3 2 3
6 3 6 14 Unloading-auger top angle gear (7 4) 3 2 3
6 3 7 lnterval – 500 hours 3 2 4
6 3 7 1 Hydraulic systems oil (8 1) 3 2 4
6 3 7 2 Hydraulic and hydrostatic systems return filter (8 2) 3 2 5
6 3 7 3 Hydraulic-oil intake filter (8 3) 3 2 6
6 3 7 4 Hydrostatic transmission filter (8 4) 3 2 6
6 3 7 5 Engine diesel-fuel filters (8 5) 3 2 7
6 3 7 6 Dehydrator filter (8 6) 3 2 8
6 3 7 7 Catalytic fluid filter (8 7) 3 2 9
6 3 7 8 Reduction gears (8 8) 3 30
6 3 7 9 Gearbox (89) 3 30
6 3 7 10 Air compressor (if installed) (90) 3 3 1
6 3 7 11 Battery (9 1) 3 3 1
Periodical maintenance operations 332
6 4 1 Description 3 3 2
6 4 1 1 Engine valves (1) 3 3 2
6 4 1 2 Coolant (2) 3 3 4
6 4 1 3 Service brake circuit fluid (3) 3 3 5
6 4 1 4 Diesel fuel tank (4) 3 3 5
6 4 1 5 Turbocharger (5) 3 3 6
6 4 1 6 Hydraulic hoses (6) 3 3 7
Lubrication 338
7 Adjustments 341
7 1 Adjustments 343
7 1 1 lmportant information 3 4 3
7 2 Belt and chain adjustment 344
ComЬines
7 2 1 Belts and chains (left-hand side) 3 4 4
7 2 1 1 Feeder drive belt (1) 3 4 5
7 2 1 2 Threshing unit drive belt (2) 3 4 6
7 2 1 3 Multi-Crop Separator drive belt (3) 3 4 7
7 2 1 4 Unloading-auger drive belt (4) 3 4 8
7 2 1 5 Belt drive for hydrostatic pump (5) 3 4 9
7 2 1 6 Belt drive for chaff spreader (if fitted) (6) 3 50
7 2 1 7 Belt drive for reversing (7) 3 5 1
7 2 1 8 Main transmission belt (8) 3 5 2
7 2 1 9 Belt drives for good grain and tailings augers (9) 3 5 3
7 2 1 1О Belt drive for straw walkers (1О ) 3 5 3
7 2 1 11 Belt drive for cutting tаЫе (11) 3 5 4
7 2 1 12 Chain drive for unloading auger (12) 3 5 4
7 2 1 13 Belt drive for straw chopper (if fitted) (13) 3 5 5
7 2 1 14 Belt drive for straw chopper (if fitted) (14) 3 5 5
7 2 1 15 Air-compressor drive belt (if installed) (15) 3 5 6
7 2 1 16 Levelling pump drive belt (only оп MF 7 3 6 0 PL – MF 7 3 70 PL – MF 7 3 6 0
PLI models) (16) 3 5 7
7 2 2 Belts and chains (right-hand side) 3 5 8
7 2 2 1 Reel-pump drive belt (20) 3 5 8
7 2 2 2 Dust aspirator drive belt (2 1) 3 59
7 2 2 3 Rotary-screen drive belt (2 2) 3 59
7 2 2 4 Belt drive for engine coolant pump (2 3) 3 6 0
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
7 2 2 5 Drive belt for engine fan and alternator (2 4) 3 6 0
7 2 2 6 Belt drive for cylinder variator (2 5) 3 6 1
7 2 2 7 Belt drive for fanning mill variator (2 6) 3 6 2
7 2 2 8 Тор chain drive for tailings auger (2 7) 3 6 3
7 2 2 9 Сгор elevator chain (2 8) 3 6 3
7 2 2 1О Chain drive for tailings elevator (2 9) 3 6 4
7 2 2 11 Front сгор elevator chain (30) 3 6 4
7 2 2 12 Finger-feed-roller drive chain (3 1) 3 6 5
7 2 2 13 Tank filling-auger drive chain (3 2) 3 6 5
7 2 2 14 Belt drive for саЬ air conditioning compressor (3 3) 3 6 6
7 3 Reverse d rive system 367
7 3 1 Adjustment of control tie rod 3 6 7
7 3 2 Adjustment of the distance between disks 3 6 8
7 4 S l i p cl utches 369
7 4 1 Description 3 6 9
7 4 1 1 Clutch for main сгор elevator upper shaft (1) 3 6 9
7 4 1 2 Clutch оп finger feed roller (2) 3 6 9
7 4 1 3 Clutch for shaker shoe counter drive (3) 3 70
7 4 1 4 Shear bolt for unloading-auger counter drive (4) 3 70
7 5 G ra i n ta n k u n loading auger 371
7 5 1 Adjustment of the support 3 7 1
7 6 Ti res 372
7 6 1 Tire pressure 3 7 2
7 6 2 Replacement of Front Wheels 3 7 3
7 6 3 Replacement of Rear Wheels 3 7 5
7 6 4 Front and геаг wheels assemЫy 3 7 7
7 7 Bra kes 379
7 7 1 Service brakes 3 7 9
7 7 2 Park brake 3 80
7 7 2 1 Disengaging the brake 3 80
7 8 Rear axle 382
7 8 1 Toe-in setting 3 8 2
7 8 2 Steering ram ball joints 3 8 2
7 8 3 Width setting 3 8 3
7 8 4 Telescopic arm position 3 8 4
7 8 5 Rear axle support 3 8 6
7 9 Battery 387
7 9 1 Battery Replacement 3 8 7
7 9 2 Suggestions regarding the battery 3 8 7
8 Systems 389
8 1 Safety Preca utions 391
8 1 1 Notes 3 9 1
8 2 E n g i n e su pply system 392
8 2 1 Permitted fuels 3 9 2
8 2 2 Fuel Circuit 3 9 3
8 2 3 Bleeding the Fuel Supply Circuit 3 9 4
8 2 4 Catalytic fluid tank (DEF) 3 9 5
8 2 5 lnjection system operation 3 9 6
8 3 E n g i n e a i r i ntake and exh aust system 398
8 3 1 Operation 3 9 8
8 4 E n g i n e coo l i n g system 401
8 4 1 Coolant 4 0 1
8 4 2 Engine cooling system operation 4 0 2
8 5 E n g i n e l u brication system 403
8 5 1 Operation 4 0 3
ComЬines
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
8 5 2 Oil vарог гесоvегу system 4 0 4
8 6 SCR system 405
8 6 1 Operation 4 0 5
8 7 Hydraulics system 408
8 7 1 Pumps and fuel tank 4 0 8
8 7 2 ТаЫе positioning hydraulic circuits 4 10
8 7 2 1 Cutting tаЫе oleopneumatic shock аЬsогЬегs 4 11
8 7 2 2 Flow гаtе proportional valve 4 12
8 7 2 3 Hose burst valves 4 12
8 7 2 4 ТаЫе horizontal positioning circuit 4 13
8 7 3 Reel rotation control hydraulic circuit 4 14
8 7 4 Hydraulic steering system 4 15
8 7 5 Auxiliary hydraulics circuit 4 16
8 7 6 Leveling hydraulic circuit 4 17
8 7 6 1 Rеаг automatic levelling (only оп MF 7 3 6 0 PLI model) 4 19
8 7 6 2 Manual leveling 4 20
8 8 Hydrostatic transmission system 421
8 8 1 Front-wheel drive 4 2 1
8 8 2 Rear-wheel drive 4 2 2
8 9 Electrical system 423
8 9 1 Main components 4 2 3
8 9 2 Computerized system 4 2 4
8 9 3 Fuses 4 2 5
8 9 4 Additional fuses 4 30
8 9 5 Relays 4 3 2
8 9 5 1 Additional relays 4 3 7
8 9 6 Control units 4 3 8
8 9 6 1 ЕХТ control unit 4 3 8
8 9 6 2 ENEDC control unit 4 3 8
8 9 6 3 FTD 1 control unit 4 39
8 9 6 4 FTD 2 control unit 4 39
8 9 6 5 1/0 module (leveling) 4 4 0
8 9 6 6 Engine control unit 4 4 0
8 9 6 7 Engine sensors and control unit 4 4 1
8 9 7 Electric motors 4 4 2
8 9 7 1 Engine ignition control motor 4 4 2
8 9 7 2 Concave position control motors 4 4 2
8 9 7 3 MCS concave position control motor 4 4 3
8 9 7 4 Gгain tank соvег position control motor 4 4 4
8 9 7 5 Stгaw deflector control motor (if fitted) 4 4 4
8 9 7 6 Fanning mill variator control motor 4 4 5
8 9 7 7 Тор sieve control motor 4 4 5
8 9 7 8 Lower sieve motor 4 4 6
8 9 8 Sensors 4 4 6
8 9 8 1 Forward speed sensor 4 4 6
8 9 8 2 Cylinder speed sensor 4 4 7
8 9 8 3 Fanning mill speed sensor 4 4 7
8 9 8 4 Reel speed sensor 4 4 8
8 9 8 5 Straw сhоррег speed sensor 4 4 8
8 9 8 6 Performance control sensors 4 4 9
8 9 8 7 Exhaust gas sensors 4 50
8 9 8 8 Returns control sensors 4 5 1
8 9 9 Electric connectors 4 5 1
8 9 1О Connections fог diagnostics 4 5 4
8 9 11 Flashing lights 4 5 4
9 TrouЫeshooting 455
9 1 Description 457
9 1 1 Feeding 4 57
9 1 2 Threshing 4 57
9 1 3 Separation and cleaning 4 59
9 1 4 Hydrostatic Т ransmission 462
9 1 5 Engine 463
9 1 5 1 ЕЕМ4 engine trouЫeshooting (self-diagnosis) 465
9 1 5 2 Fault codes 465
9 1 6 Hydraulics system 477
9 1 7 Electrical system 479
9 1 8 Air conditioning circuit 479
9 1 9 Straw chopper 480
1 О Off-Season Storage 483
10 1 Procedure to follow 485
10 1 1 Operations to Ье carried out after the harvest 48 5
10 1 2 Ordering spare parts 486
10 1 3 Operations to Ье carried out before the new season 486
11 Optional equipment 489
11 1 lnformation 491
11 1 1 General considerations 491
11 2 Optional equipment 492
11 2 1 Four-wheel drive 49 2
11 2 2 Windbreak 49 2
11 2 3 Additional lights 49 3
11 2 4 Additional lights for flip-up maize headers 49 4
11 2 5 Additional fire extinguisher 49 4
11 2 6 Diesel fuel filter 49 5
11 2 7 Air compressor for maintenance 496
11 2 8 Weight and moisture control monitor 497
11 2 9 Multimedia navigation system 497
11 2 1 О Trailer hitch 498
11 2 11 Vertical Knifes 498
11 2 1 2 Cylinder cover 499
11 2 1 3 Tailings cover plate 499
11 2 1 4 Тор sieve 500
11 2 1 5 Bottom sieve 501
11 2 16 Auto-Guide 50 2
11 2 17 AGCOMMAND 50 2
11 З Equipment for threshing 503
11 3 1 Equipment for maize 50 3
11 3 2 Equipment for corn-cob 50 5
11 3 3 Equipment for rice 50 5
11 3 4 Equipment for light seed crops 506
11 3 5 Equipment for soya and peas 506
11 4 Ballast weights 507
11 4 1 Description 507
11 4 2 Ballast weights оп геаг axle 508
11 4 3 Ballast weights оп the straw walker hood for machines without straw chopper 509
11 4 4 Ballast weights оп the геаг wheels with а liquid mix (for tubeless tires) 51 О
11 4 5 Filling tires with anti-freeze solutions 511
11 5 Straw chopper 512
11 5 1 Electrically operated straw chopper straw deflectors 51 2
11 5 2 Transport position 51 2
11 5 3 Working position 51 3
11 5 4 Operating the straw chopper 51 5
ComЬines
MF 7360-7370_EN_LA327316015
ТаЬ/е of contents
1 1 5 5 Disengaging the straw chopper 51 6
1 1 5 6 Access to the straw chopper rotor 51 6
1 1 5 7 Straw chopper rotor knives 5 1 7
1 1 5 8 Counter-knives 518
1 1 5 9 Chopping quality 518
1 1 5 1 О Use of straw chopper in maize 5 1 9
11 6 Chaff Spreader 521
1 1 6 1 Working and maintenance positions 52 1
1 1 6 2 Chaff spreader speed 52 3
1 1 6 3 Disengaging the chaff spreader 52 3
1 1 6 4 Chaff spreader belt tensioning 52 3
11 7 Tracks 524
1 1 7 1 Use and maintenance 524
1 1 7 2 Track chain tension 525
12 Technical Specifications 527
12 1 Wheels and tires 529
1 2 1 1 information 52 9
1 2 1 2 Wheel tightening torque 52 9
1 2 1 3 Tire capacity 52 9
1 2 1 4 Front tire equipment 53 0
1 2 1 5 Rear tire equipment 53 3
1 2 1 6 Ballast weights 53 4
12 2 Dimensions 535
1 2 2 1 Combine dimensions 53 5
1 2 2 2 Clearance between unloading auger and tаЫе 5 4 2
12 З Technical specifications 543
1 2 3 1 Feeding unit 5 4 3
1 2 3 2 Threshing sys 5 4 3
1 2 3 3 Cleaning unit 5 4 9
1 2 3 4 Grain tank 550
1 2 3 5 Hydraulic system 551
1 2 3 6 Hydrostatic system 551
1 2 3 7 Engine 552
1 2 3 8 Electrical components 553
1 2 3 9 Transmission 553
1 2 3 1 О Rear axle 555
1 2 3 1 1 Weight 555
13 lndex 557

Need help? Contact: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V