Massey Ferguson MF 4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson MF 4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson MF 4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

INTRODUCTION:

The purpose of this manual is to еnаЫе the owner and operator to operate the tractor safely and appropriately. lf the instructions аге followed correctly, the tractor will work for many years, following the MASSEY FERG USON tradition. Configuring and adjusting the tractor in the dealership will ensure that these operating and service instructions аге properly understood. Always consult the dealer if any part of the manual is not understood. lt is extremely important that these instructions аге understood and followed. Daily maintenance should become а routine. Always keep а record of the service hours.

• When ordering new parts, use only original MASSEY FERGUSON parts. The MASSEY FERGUSON dealer network provides original parts and сап give instructions for installation and use. Using low quality parts сап seriously damage the equipment. We recommend that customers buy service parts from MASSEY FERGUSON authorised dealers only. Due to variations in operating conditions, it is impossiЫe for the manufacturer to make comprehensive ог definitive statements in its puЫications with respect to the performance ог usage methods of its machines, ог to Ье responsiЫe for any damages ог losses arising from such statements, errors ог om1ssюns.
• То prevent the warranty being invalidated, consult your MASSEY FERG USON dealer for special instructions, if the tractor will Ье used in special conditions, which may Ье harmful (use in deep waters ог in flooded fields, for example). These tractors were designed for agricultural applications only (appropriate use).
• Any other use shall Ье considered inappropriate. MASSEY FERG USON is not liaЫe for damage to property ог personal injuries caused Ьу improper use. The user must take full responsibility for the consequences of misuse. Conformity and full adherence to the operation, service and maintenance requirements specified Ьу MASSEY FERG USON аге essential factors for appropriate use. These tractors must Ье operated and maintained only Ьу qualified personnel familiar with the features of the tractor, in addition to the safety rules and standards (accident prevention). lt is recommended that customers contact one of the MASSEY FERGUSON dealerships in the event of post-sale proЫems and for any adjustment that may Ье required.

General Recommendations:
Why is safety important?
1 . Accidents incapacitate and сап Ье fatal
2 . Accidents generally involve significant costs
3. Accidents сап Ье avoided.

• This Manual describes safety recommendations and procedures related to the tractor and does not, therefore, go into details about the саге of the implement coupled to and/or powered Ьу the tractor. For this, see the Manual for the implement used. This section of the Manual is intended to point out some of the basic safety situations involved with your tractor and provide suggestions оп how to avoid high risk situations and accidents.
• Therefore, users must take all possiЫe precautions and guidance. There аге always а series of precautions to Ье taken for each implement, attachment and work situation, which would Ье impossiЫe to list in this Manual. MASSEY FE RGUSON is in по way аЫе to directly control the conditions of use, servicing ог repair that the tractor is subjected to. Therefore, users аге responsiЫe for always following appropriate practices for their safety and for the integrity of the tractor, other people ог machines in the same work агеа.

TABLE OF CONTENTS:

Massey Ferguson MF 4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

1 Safety 11
1 1 lntroduction 13
1 2 General Recommendations 14
1 2 1 The tгасtог 1 4
1 2 2 Safety notes 1 4
1 2 3 Note to the орегаtог 1 5
1 2 4 Roll-Over Protective Structure (ROPS) 1 5
1 2 5 Safe maintenance 1 6
1 2 6 Fuel 1 6
1 3 Follow а safety programme 18
1 3 1 Fог ргорег operation 1 8
1 4 Prepare yourself for safe operation 19
1 4 1 Know your equipment 1 9
1 4 2 Protect yourself 1 9
1 4 3 Use the safety devices and protection availaЫe 1 9
1 4 4 Check the equipment 20
1 4 5 Cleaning the tractor 21
1 4 6 Protect the environment 21
1 5 Start-up 22
1 5 1 Ргiог to start-up 22
1 5 2 How to mount and dismount the machine safely 22
1 5 3 Safe start-up 23
1 5 4 Test the controls 23
1 5 5 Starting fluid 24
1 6 Safe operation 25
1 6 1 Manoeuvre correctly 25
1 6 2 Safety practices 25
1 6 3 Rollover risk 26
1 6 4 То prevent геаг rollover 27
1 6 5 То prevent side rollovers 27
1 6 6 Emergency Ьгаkе 28
1 6 7 General operating hazards 28
1 6 8 lmplements and additional equipment 29
1 6 9 Towing with the tractor 29
1 7 Road Transport 31
1 7 1 Rules of the Road 31
1 8 Quality policy 32
1 8 1 Main guidelines 32
1 8 2 ISO 1 4 000 32
1 8 3 Environmental Management System 32
1 8 4 Environmental issues 32
1 8 5 Recommendations for tractor users and customers 33
1 8 6 CONAMA Resolution 34
1 8 7 Mandatory battery recycling 34
1 8 8 Battery safety 34
2 Introduction 37
2 1 Identification of your tractor 39
2 2 Description of decals 41
2 3 lmportant Data 51
MF4200
6269696М4
ТаЬ/е of contents
3 lnstruments and Controls 53
3 1 General ldentification 55
3 1 1 ldentification – СаЬ 5 5
3 1 2 ldentification – Platform 5 6
3 2 Description of Commands and Controls 57
3 2 1 Steering wheel 5 7
3 2 2 Clutch pedal 5 7
3 2 3 Neutral start switch 5 7
3 2 4 Brake pedals 5 8
3 2 5 Throttle pedal 5 8
3 2 6 Differential lock pedal 5 8
3 2 7 Speed selector lever 5 9
3 2 8 Gearshift lever 5 9
3 2 9 Creeper selector lever (lf equipped) 6 2
3 2 1 О Parking brake lever 6 3
3 2 1 1 Hand throttle 6 3
3 2 1 2 Front-wheel drive engagement 6 4
3 2 1 3 РТО and I РТО engagement lever 6 4
3 2 1 4 Depth control (traction) and Hydraulic system position lever 6 5
3 2 1 5 Hydraulic system reaction control 6 6
3 2 1 6 Remote control lever(s) (if equipped) 6 6
3 2 1 7 Combined flow selector lever 6 7
3 2 1 8 Se? 6 7
3 2 1 8 1 Seat adjustment – СаЬ 6 8
3 2 1 8 2 Seat adjustment – Platform 6 8
3 2 19 Safety belt adjustments 6 9
3 2 2 0 Slow moving vehicle alert 6 9
3 2 2 1 Trailer light socket 6 9
3 3 lnstrument panel and keys 71
3 3 1 lnstrument panel overview 7 1
3 3 2 lndicators 7 2
3 3 3 Tachograph 7 2
3 3 3 1 Display alert messages 7 2
3 3 3 2 Display messages 7 3
3 3 3 3 Power take-off rpm adjustment 7 3
3 3 4 Warning lights 7 3
3 3 5 Electrical controls 7 5
3 4 ldentification of headlights and tail lights 77
3 4 1 СаЬ tractors 77
3 4 2 Platform tractors 78
3 5 Cabs and air conditioner 79
3 5 1 General identification 79
3 5 2 СаЬ controls 8 2
3 5 3 Air conditioner and heater operation 8 4
3 5 3 1 Sequence for activation of the system 8 5
4 Operation 87
4 1 Ballasting 89
4 1 1 What is ballasting? 89
4 1 2 Ballasting with metal weights (counterbalance weights) 90
4 1 3 Ballasting with water 90
4 1 4 Draining water from the tyre 91
4 2 Track adjustment 92
4 2 1 The track concept and its importance 92
4 2 2 4х 2 front axle 92
4 2 2 1 4х 2 front axle tracks 93
4 2 3 Front axle ( 4х 4) 94
4 2 3 1 lnstructions fог changing the track 94
4 2 3 2 Steering angle 95
4 2 4 Rеаг axle tгack 95
4 2 4 1 Rice wheels 96
4 2 4 2 Wheel with die-cast disc 96
4 2 4 3 Rеаг wheels with РАVТ system 96
Recommended tyres for your tractor 99
4 3 1 Compatibility of front х геаг tyres 99
4 3 1 1 Recommended combinations fог геаг х front wheels 99
4 3 2 Operation with Dual Wheels 1 0 1
Power Take-Off 102
4 4 1 Changing the clutch stage 1 0 2
4 4 1 1 After using the РТО 1 0 3
4 4 2 lndependent Роwег Take-Off Operation 1 0 3
4 4 3 General Guidelines of use fог the (l) PTO 1 0 3
4 4 4 Changing the output shaft 1 0 5
4 4 5 Changing the dashboard programming 1 0 6
Draw Bar 107
4 5 1 Changing the height of the draw Ьагs 1 0 7
4 5 2 Changing the length of the draw Ьагs 1 0 8
4 5 3 When operating with the draw Ьаг 1 0 9
Roll-Over Protective Structure (ROPS) 111
4 6 1 Ргосеduге fог folding the ROPS (lf installed) 1 1 2
Prior to start-up 113
Before starting the job 114
4 8 1 А TS electrical system 1 1 4
Stopping the tractor 115
4 9 1 Emergency stop 1 1 5
Start-up and movement of the tractor 116
4 1 0 1 lnfluence of the tгасtог protection system 1 1 6
4 1 0 2 lnfluence of the protection system оп tгасtог servicing 1 1 7
4 1 0 3 Alternative start-up features 1 1 7
Break-in instructions – New engine 119
Operations below 0°С 120
Engagement and use of front-wheel drive 121
Gear Selection 122
4 14 1 Engine Speed and the РТО 1 2 2
4 1 4 2 Using the tаЫе of speeds 1 2 2
Hydraulic lift system 124
4 1 5 1 ldentification of components 1 2 4
4 1 5 2 Adjustments before operation 1 2 4
4 1 5 2 1 Adjusting the side stabilizers 1 2 7
4 1 5 3 Lift system categories 1 2 8
4 1 5 4 External auxiliary hydraulic cylinders 1 2 9
4 1 5 5 Procedures for coupling and uncoupling implements 1 2 9
4 1 5 5 1 Uncoupling lmplement 1 3 0
4 1 5 6 Hydraulic lift system 1 3 1
4 1 5 6 1 Traction Control (depth) outer lever – yellow selector 1 3 2
4 1 5 6 2 Position control – inner lever – red selector 1 3 3
4 1 5 6 3 Position control 1 3 3
Use of the remote control 134
4 1 6 1 Presentation 1 3 4
4 1 6 1 1 Combined flow 1 3 4
4 1 6 1 2 Valve types 1 3 5
ТаЬ/е of contents
4 1 6 2 Operating the system 1 3 5
4 1 6 2 1 Connecting and disconnecting hoses 1 3 6
4 1 6 2 2 Operating in Single ог DouЫe action mode 1 3 7
4 1 6 2 3 Hydraulic motor drive 1 3 8
4 1 6 3 Operation of remote control with vагiаЫе flow 1 3 8
4 1 6 4 Combined flow 1 3 8
4 1 6 5 lmplements that use large quantities of oil 1 39
4 1 6 6 General recommendations 1 4 0
4 17 Using the brakes 1 41
4 1 7 1 Making sharp turns 1 4 1
4 18 Differential lock 1 42
4 19 Power take-off 1 43
4 19 1 General guidelines 1 4 3
5 Maintenance 1 45
5 1 lntroduction 1 47
5 2 Exclusive maintenance for new tractors (up to 100 hours of operation)
1 ?
5 3 Periodic maintenance tаЫе 1 50
5 4 Grease Lubrication Points 1 57
5 5 Access to service points 1 62
5 6 Servicing the engine 1 63
5 6 1 Checking the lubricant oil level 1 6 3
5 6 2 Changing the engine oil 1 6 3
5 6 3 Replacing the engine oil filter 1 6 4
5 6 4 Cleaning the crankcase vent hose 1 6 5
5 6 5 Checking and adjusting the engine idle 1 6 5
5 6 6 Draining water from the sedimenter and filters 1 6 6
5 6 7 Replacing the sedimenter 1 6 6
5 6 8 Replacing the fuel filters 1 6 7
5 6 9 Bleeding the fuel system 1 6 7
5 6 1 О Bleeding the fuel filters 1 6 8
5 6 1 1 lnjection pump and nozzles (high pressure system) 1 6 8
5 6 1 2 Fuel tank 1 6 9
5 7 Servicing the air filtration system 1 70
5 7 1 Servicing the ргimагу element 170
5 7 2 Removal of the ргimагу element 170
5 7 3 Servicing the secondary element 1 7 1
5 7 4 Filtered аiг piping 1 7 1
5 7 5 Plastic housing of the filter element housing 1 7 1
5 7 6 Restriction indicator testing 172
5 8 Servicing the cooling system 1 73
5 8 1 External cleaning of the radiator 1 7 3
5 8 2 Radiator water level 1 74
5 8 3 Changing the water and cleaning the system 1 74
5 8 4 Looking after the thermostat valve and radiator сар 1 7 6
5 8 5 Checking and adjusting fan belt tension 1 7 6
5 9 Servicing the clutch 1 78
5 9 1 Adjusting the pedal height 1 78
5 9 2 Checking disengagement of the 2nd stage of the clutch 1 78
5 1 О Servicing the transmission system 1 81
5 1 0 1 Cleaning the vents 1 8 1
5 1 0 2 Checking the hydraulic and transmission oil level 1 8 1
5 1 0 3 Changing the transmission and hydraulic oil 1 8 1
5 1 0 4 ISYP pump filter screen 1 8 3
5 1 0 5 Replacing the return filter 1 8 3
5 1 0 5 1 Procedure for replacing the return oil filter 1 8 4
5 1 0 6 Cleaning the suction filter 1 8 4
5 1О 7 ldentification of hydraulic pumps 18 5
Servicing the rear final drives rear and front axle 1 86
5 1 1 1 Lubricating the rear final drives 1 8 6
5 1 1 2 Lubricating the front final drives – 4х 4 1 8 6
5 1 1 3 Changing the front planetary oil 1 8 6
5 1 1 4 Lubricating the front differential – 4х 4 1 8 7
5 1 1 5 Changing the front differential oil ( 4х 4} 1 8 7
5 1 1 6 Front hub adjustment 4х 2 1 8 8
5 1 1 7 Removing front axle spindle slack ( 4х 2 tractors} 1 8 9
Front wheel alignment 1 90
5 1 2 1 Adjustment procedure – 4х 2 axle 190
5 1 2 2 Adjusting the 4х 4 axle 191
Servicing the brakes 1 92
5 1 3 1 Bleeding the Ьгаkе hydraulic drive system 192
5 1 3 1 1 Procedure for Ыeeding 193
5 1 3 2 Adjusting the fгее play of the pedals 193
5 1 3 3 Test for simultaneous activation of the brakes 194
Electrical system 1 95
5 14 1 Саге with the electrical system 195
5 14 2 Battery maintenance 196
5 14 3 Alternator and fan belt 199
5 1 4 4 Adjusting the headlights 2 0 0
5 14 5 Replacing bulbs in headlights and lights 2 0 1
5 14 5 1 Bulb of the rеаг work light (А}, auxiliary lights and front саЬ headlights
(В} 2 0 1
5 14 5 2 Round service light: 5 5 watts 2 0 3
5 14 5 3 Front position and hazard lights 2 0 4
5 1 4 5 4 Turn signals, hazard lights and Ьгаkе lights 2 0 4
5 14 5 5 lnterior саЬ light (courtesy light} 2 0 5
5 14 5 6 lnterior dashboard lighting 2 0 6
5 14 5 7 Reverse warning sound 2 0 6
5 14 6 Replacement of relays and fuses 2 0 7
5 1 4 6 1 Main electrical panel – platform tractors 2 0 8
5 1 5 Servicing the air conditioner 209
5 1 5 1 Cleaning the condenser 2 0 9
5 1 5 2 Checking the compressor belt tension 2 0 9
5 1 5 3 Cleaning the саЬ air ventilation filter 2 1О
5 1 5 4 Periodic general inspection 2 1 1
5 1 5 5 Refilling the gas (or refrigerant) 2 1 1
5 1 6 Tyre calibration and load 21 2
5 1 6 1 Calibration (PSI) х Load capacity (kg) 2 1 3
5 1 7 Storage of the tractor during inactive periods 21 5
5 1 7 1 Other procedures 2 1 6
5 1 7 1 1 Returning to work 2 1 7
6 Diagnosis of faults 21 9
6 1 Analysis of abnormalities, causes and solutions 221
7 MF4200 Specifications 227
7 1 Engine 229
7 1 1 General engine data 2 29
7 1 2 Lubrication system 2 29
7 1 3 Air filtering system 2 29
MF4200
6269696М4
ТаЬ/е of contents
7 1 4 Fuel supply system 2 29
7 1 5 Cooling system 2 3 0
7 2 Electrical system – powers and capacities 2 31
7 3 Clutch 2 32
7 4 Gearbox 2 33
7 5 Theoretical road speeds 2 34
7 6 Front and rear axle 2 35
7 6 1 Rear axle 2 3 5
7 6 2 Front axle 2 3 5
7 7 Hydraulic 2 36
7 7 1 Brakes 2 3 6
7 7 2 Hydrostatic steering 2 3 6
7 7 3 Remote control 2 3 6
7 7 4 Hydraulic lift system 2 3 7
7 8 Power take-off 2 38
7 9 Draw bar 2 39
7 10 СаЬ and air conditioner 2 40
7 11 Dimensions and weights of standard tractors 2 41
7 12 Refilling capacities and lubricant specifications 2 42
8 Accessories 2 45
8 1 Optional items availaЬle 2 47
9 Warranty 2 49
9 1 Warranty 2 51
9 1 1 Massey Ferguson Warranty Terms 2 5 1
9 1 2 lnstructions for technical delivery 2 5 1
9 1 3 Date log 2 5 3
9 1 4 Pre-delivery inspection 2 5 4
9 1 5 Free inspection 2 5 5
1 О Glossary 257
11 Index 2 59

Contact us: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V