Massey Ferguson MF 6700S Series 6712S 6713S 6714S 6715S 6716S 6718S Dyna-4 Dyna-6 Operator’s Manual

Description

Massey Ferguson MF 6700S Series 6712S 6713S 6714S 6715S 6716S 6718S Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson MF 6700S Series 6712S 6713S 6714S 6715S 6716S 6718S Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

MF 6700 S – Operation
Version Classic
MF 6712 S
MF 6713 S
MF 6714 S
MF 6715 S
MF 6716 S
MF 6718 S
Dyna-4 – Dyna-6
Part. No : ACT0039270

Introduction – Safety instructions
Operator’s Manual:

• The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.
• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication, or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson MF 6700S Series 6712S 6713S 6714S 6715S 6716S 6718S Dyna-4 Dyna-6 Operator’s Manual – PDF DOWNLOAD

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 13
1 2 Your tractor identification details 15
1 2 1 Your tractor identification details 15
2 Safety instructions and safety points – Warranty 17
2 1 Introduction 19
2 1 1 Introduction – Safety instructions 19
2 2 Safety – Symbols and terms 21
2 2 1 Safety- Symbols and terms 2 1
2 3 Safety decals and instructions 22
2 3 1 Checking and replacing the safety decals and instructions 2 2
2 3 2 Presentation and location of the safety decals and instructions 2 3
2 4 General safety instructions 28
2 4 1 Awareness of the safety instructions and symbols 2 8
2 4 2 Operator familiarity in the use of the tractor 2 8
2 4 3 Filling the fuel tank 2 9
2 4 4 Mounting and dismounting the operator’s seat 2 9
2 4 5 Mandatory procedure before dismounting the tractor 3 0
2 5 Special safety instructions for preparing the tractor for use 31
2 5 1 Protective clothing 3 1
2 5 2 Activated carbon filter information 3 1
2 5 3 Safety devices and items 3 4
2 5 4 Checking the tractor 3 4
2 6 Specific safety instructions for starting the tractor 36
2 6 1 Protection of persons other than the operator 3 6
2 6 2 Start up safely 3 6
2 6 3 Starting the tractor with jump start cables 3 7
2 6 4 Checks to be carried out after start-up 3 8
2 7 Specific safety instructions for using the tractor 39
2 7 1 General instructions 3 9
2 7 2 Protection of persons other than the operator 4 0
2 7 3 Overturning 4 0
2 7 4 Tractor towing 4 3
2 7 5 Regulatory data on maximum permitted trailed weights 4 3
2 7 6 Road use 4 7
2 7 7 Instructions and Legislation for the Towing of Implements 4 8
2 7 8 Parking brake 5 0
2 7 9 Power take-off 5 0
2 7 10 Implements 5 1
2 7 11 Front-end loader 5 3
2 8 Specific safety instructions for servicing the tractor 54
2 8 1 Pollution warning to observe when servicing the tractor 5 4
2 8 2 General instructions 5 4
2 8 3 Handling instructions 5 5
2 8 4 Special instructions for cleaning the tractor 5 7
2 9 Protective structures 58
2 9 1 Protective structures – Use and accreditation 5 8
2 9 2 Cab 5 8
MF 6700 S – Operation
ACT0039270
Table of contents
2 9 3 Seat belt 5 8
2 9 4 Instructor seat 5 9
2 10 Warranty 60
2 10 1 General 6 0
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 6 0
2 10 3 Warranty procedure 6 0
2 10 4 Procedure to follow if changing region 6 0
2 10 5 Servicing during and after the warranty period 6 1
2 10 6 California emission control warranty statement 6 1
2 10 7 United States and Canada emission control warranty statement 6 4
3 Operation 69
3 1 Standard cab 73
3 1 1 S teering console 7 3
3 1 2 Instrument panel 7 4
3 1 3 Control unit 8 1
3 1 4 Pedals 8 1
3 1 5 Steering wheel 8 2
3 1 6 Operator presence detector 8 2
3 1 7 Automatic adjustment pneumatic seat 8 6
3 1 8 Manual adjustment pneumatic seat 9 2
3 1 9 Instructor seat 9 7
3 1 10 Right-hand console 9 8
3 1 11 Right-hand pillar 9 8
3 1 12 Left-hand console 9 9
3 1 13 Upper console 10 0
3 1 14 Manual air conditioning 10 2
3 1 15 Manual air conditioning 10 7
3 1 16 Additional heater 112
3 1 17 Accessories sockets 112
3 1 18 Emergency exits 113
3 1 19 Sun visor 113
3 1 2 0 Wheel chock(s) (optional) 114
3 2 Setup and Information Screen control screens on the instrument
panel 116
3 2 1 Using the Setup and Information Screen 116
3 2 2 Screens Setup and Information Screen 118
3 3 Body 125
3 3 1 Opening the bonnet 12 5
3 3 2 Adjusting the external rear-view mirrors 12 5
3 3 2 1 Positioning the arms 12 5
3 3 2 2 Adjusting the arm extensions (depending on model) 12 6
3 3 2 3 Adjusting the rear-view mirrors (depending on model) 12 6
3 3 3 Adjusting the double-angle rear-view mirror 12 6
3 3 3 1 Positioning and extending the arms 12 6
3 3 3 2 Rear-view mirror with manual adjustment 12 7
3 3 3 3 Rear-view mirror with electric adjustment 12 7
3 4 Engine 129
3 4 1 Running-in 12 9
3 4 2 Filling with fuel 12 9
3 4 3 Start switch 13 1
3 4 4 Start-up 13 1
3 4 5 Starting the SCR Technology engine in cold weather 13 2
3 4 6 Information about the various operating modes of the SCR Technology engine 13 4
3 4 7 Information on the different operating modes of the SCR Technology 13 9
3 4 8 Stopping the engine 14 3
3 4 9 Engine speed 14 3
MF 6700 S – Operation
ACT0039270
3 5
3 6
3 7
3 8
Table of contents
3 4 10 Storing an engine speed 14 5
Transmission 147
3 5 1 Presentation of the different driving modes 14 7
3 5 2 Clutch function 14 7
3 5 3 PowerShuttle 14 8
3 5 3 1 PowerShuttle Protection Function 15 0
3 5 4 Adjusting the start ratios ( 1A , 1B , 1C etc ) 15 0
3 5 4 1 Setting procedure: 15 0
3 5 4 2 Starting ratio 15 1
3 5 5 Lever (Speedmatching) mode 15 1
3 5 6 Pedal (AutoDrive) mode 15 2
3 5 7 Road mode (Hare)/Field mode (Tortoise) 15 3
3 5 8 Changing the transmission ratios ( 1A , 1B , 1C , etc ) 15 4
3 5 9 Optional creeper range (snail) 15 4
3 5 10 Tractor towing 15 5
3 5 11 Forward speed calibration 15 5
Brakes 157
3 6 1 Brake pedals 15 7
3 6 2 Instructions and Legislation for the Towing of Implements 15 7
3 6 3 Hydraulic trailer brake 15 8
3 6 4 Pneumatic trailer brake 15 9
3 6 5 Park brake 16 0
Front axle 162
3 7 1 Four-wheel drive front axle 16 2
3 7 2 Suspended front axle 16 3
3 7 3 Permissible load on the front axle 16 5
Differential lock 168
3 8 1 Differential lock 16 8
3 9 Power take-off 170
3 9 1 Front power take-off 170
3 9 2 Rear power take-off (PTO) 170
3 9 2 1 Selecting the power take-off speed 171
3 9 2 2 Adjusting the progressivity of power-take-off engagement 172
3 9 2 3 Engaging PTO in manual mode: 173
3 9 2 4 Engaging PTO in automatic mode: 173
3 9 3 Economy PTO 174
3 9 4 GSPTO (optional) 175
3 9 5 Replacing the interchangeable shaft 176
3 9 6 Changing the flanged shaft 177
3 9 7 PTO external control 178
3 9 8 Power take-off electronic controls 179
3 9 9 Power take-off protection 179
3 10 Linkage 181
3 10 1 General 18 1
3 10 2 Rear linkage electronic controls 18 2
3 10 3 Rear linkage operation 18 4
3 10 4 Rear linkage external controls 189
3 10 5 Front linkage 19 0
3 10 6 Top link 19 3
3 10 7 Bottom links 19 5
3 10 8 Lift rods 19 6
3 10 9 Stabilizers 19 7
3 10 9 1 Stabilizers with manual telescopic adjustment 19 7
3 10 9 2 Automatic stabilizers 19 9
3 10 9 3 Stabilizers with shoes 2 0 0
3 10 10 Ball joint support 2 0 0
3 11 Towing equipment 201
MF 6700 S – Operation
ACT0039270
Table of contents
3 11 1 General 2 0 1
3 11 2 Swinging drawbar 2 0 5
3 11 2 1 Fitting the swinging drawbar 2 0 7
3 12 Auxiliary hydraulics 208
3 12 1 General 2 0 8
3 12 2 Description of hydraulic couplers on Open Center system 2 0 8
3 12 3 Use of hydraulic couplers on Open Center system 2 0 9
3 12 4 Description of hydraulic couplers on Closed Center system (Load Sensing) 2 12
3 12 5 Use of hydraulic couplers on Closed Center system (Load Sensing) 2 14
3 12 6 Description of the hydraulic controls inside the cab 2 18
3 12 7 Hydraulics control lever 2 19
3 12 8 Open Centre 10 0 I/min ( 2 6 4 gal/min (US)) 2 2 0
3 12 8 1 Pump coupling (combined flow) 2 2 0
3 12 8 2 Pump uncoupling 2 2 1
3 12 9 Setting flow rates 2 2 1
3 13 Standard front-end loader function 222
3 13 1 Front-end loader 2 2 2
3 13 2 Layout of components 2 2 3
3 13 3 Standard front-end loader connection 2 2 3
3 13 4 Using the mechanical joystick of the front-end loader 2 2 4
3 13 4 1 Joystick in working position 2 2 5
3 13 4 2 Joystick in rest position 2 2 5
3 13 4 3 Joystick functions for the front-end loader 2 2 6
3 13 4 4 Electrical functions for the front-end loader 2 2 6
3 13 4 5 Floating position 2 2 6
3 13 4 6 3rd and 4th functions 2 2 7
3 13 4 7 Arm suspension 2 2 7
3 13 4 8 Locking and unlocking accessories 2 2 8
3 14 Lighting 229
3 14 1 Main lighting control module 2 2 9
3 14 2 Work lights module 2 3 0
3 15 Suspended cab 232
3 15 1 Suspended cab 2 3 2
3 16 Front tires and track widths 235
3 16 1 Wheel studs 2 3 5
3 16 2 Installation points of the axle stands 2 3 5
3 16 3 Adjusting the front wheel track width 2 3 6
3 16 4 Adjusting the 4WD front axle stops 2 3 9
3 16 4 1 Fitting the oscillation stops 2 3 9
3 16 4 2 Adjusting the steering angle 2 3 9
3 16 4 3 Toe-in check 2 4 0
3 16 4 4 Adjusting the front fenders Shoe side adjustment on the front axle 2 4 0
3 16 4 5 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 4 1
3 16 4 6 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 4 1
3 16 5 Tires 2 4 1
3 16 6 Tire pressures 2 4 1
3 17 Rear tires and track widths 242
3 17 1 Wheel studs 2 4 2
3 17 2 Installation points of the axle stands 2 4 2
3 17 3 Rear track width with flanged shafts 2 4 3
3 17 4 Rear track width with short straight shafts 2 4 5
3 17 5 Rear track width with long straight shafts 2 4 9
3 17 6 Adjusting the rear wheel track width 2 5 1
3 17 6 1 A djustment of wheel position on the straight shaft 2 5 2
3 17 6 2 Adjustment of wheel position on the straight shaft 2 5 2
MF 6700 S – Operation
ACT0039270
Table of contents
3 18 Dual wheels 254
3 18 1 Dual wheels 254
3 18 2 Installation points of the axle stands 255
3 18 3 Dual rear wheel track width with long straight shafts 256
3 18 4 Adjusting the rear wheel track width 261
3 18 4 1 Adjustment of wheel position on the straight shaft 262
3 18 4 2 Adjustment of wheel position on the straight shaft 262
3 19 Ballast 264
3 19 1 Liquid ballasting 264
3 19 2 Front-end weight 264
4 Accessories 269
4 1 Cab 211
4 1 1 Cab accessories 271
4 2 Engine 212
4 2 1 Engine accessories 272
4 3 Power take-off 273
4 3 1 Power take-off accessories 273
4 4 Linkage 274
4 4 1 Linkage accessories 274
4 5 Auxiliary hydraulics 275
4 5 1 Auxiliary hydraulics accessories 275
4 6 Wheels and tires 276
4 6 1 Wheels and tires accessories 276

Contact us: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V